Jasmonate-Sensitivity-Assisted Screening and Characterization of Nicotine Synthetic Mutants from Activation-Tagged Population of Tobacco (Nicotiana tabacum L.)

Nicotine is a secondary metabolite that is important to the defense system and commercial quality of tobacco (Nicotiana tabacum L.). Jasmonate and its derivatives (JAs) are phytohormone regulators of nicotine formation; however, the underlying molecular mechanism of this process remains largely unclear. Owing to the amphitetraploid origin of N. tabacum, research on screening and identification of nicotine-synthetic mutants is relatively scarce. Here, we describe a method based on JA-sensitivity for screening nicotine mutants from an activation-tagged population of tobacco. In this approach, the mutants were first screened for abnormal JA responses in seed germination and root elongation, and then the levels of nicotine synthesis and expression of nicotine synthetic genes in the mutants with altered JA-response were measured to determine the nicotine-synthetic mutants. We successfully obtained five mutants that maintained stable nicotine contents and JA responses for three generations. This method is simple, effective and low-cost, and the finding of transcriptional changes of nicotine synthetic genes in the mutants shows potentials for identifying novel regulators involved in JA-regulated nicotine biosynthesis.

Characterization of a potato activation-tagged mutant, nikku, and its partial revertant

A potato mutant with a strong stress-response phenotype, and a partial mutant revertant, were characterized. Gene expression patterns and DNA cytosine methylation varied between these and wild-type, indicating a role for DNA cytosine methylation changes in the gene expression and visible phenotypes. Morphological and molecular studies were conducted to compare potato cv. Bintje, a Bintje activation-tagged mutant (nikku), and nikku revertant phenotype plants. Morphological studies revealed that nikku plants exhibited an extremely dwarf phenotype, had small hyponastic leaves, were rootless, and infrequently produced small tubers compared to wild-type Bintje. The overall phenotype was suggestive of a constitutive stress response, which was further supported by the greater expression level of several stress-responsive genes in nikku. Unlike the nikku mutant, the revertant exhibited near normal shoot elongation, larger leaves and consistent rooting. The reversion appeared partial, and was not the result of a loss of 35S enhancer copies from the original nikku mutant. Southern blot analyses indicated the presence of a single T-DNA insertion on chromosome 12 in the mutant. Gene expression studies comparing Bintje, nikku and revertant phenotype plants indicated transcriptional activation/repression of several genes flanking both sides of the insertion in the mutant, suggesting that activation tagging had pleiotropic effects in nikku. In contrast, gene expression levels for many, but not all, of the same genes in the revertant were similar to Bintje, indicating some reversion at the gene expression level as well. DNA methylation studies indicated differences in cytosine methylation status of the 35S enhancers between the nikku mutant and its revertant. In addition, global DNA cytosine methylation varied between Bintje, the nikku mutant and the revertant, suggesting involvement in gene expression changes, as well as mutant phenotype.

The Brassicaceae-specific EWR1 gene provides resistance to vascular wilt pathogens

Soil-borne vascular wilt diseases caused by Verticillium spp. are among the most destructive diseases worldwide in a wide range of plant species. The most effective means of controlling Verticillium wilt diseases is the use of genetic resistance. We have previously reported the identification of four activation-tagged Arabidopsis mutants which showed enhanced resistance to Verticillium wilt. Among these, one mutant also showed enhanced resistance to Ralstonia solanacearum, a bacterial vascular wilt pathogen. Cloning of the activation tag revealed an insertion upstream of gene At3g13437, which we designated as EWR1 (for Enhancer of vascular Wilt Resistance 1) that encodes a putatively secreted protein of unknown function. The search for homologs of Arabidopsis EWR1 (AtEWR1) in public databases only identified homologs within the Brassicaceae family. We subsequently cloned the EWR1 homolog from Brassica oleracea (BoEWR1) and show that over-expression in Arabidopsis results in V. dahliae resistance. Moreover, over-expression of AtEWR1 and BoEWR1 in N. benthamiana, a member of the Solanaceae family, results in V. dahliae resistance, suggesting that EWR1 homologs can be used to engineer Verticillium wilt resistance in non-Brassicaceae crops as well.

The Arabidopsis thaliana DNA-binding protein AHL19 mediates verticillium wilt resistance

Verticillium spp. are destructive soilborne fungal pathogens that cause vascular wilt diseases in a wide range of plant species. Verticillium wilts are particularly notorious, and genetic resistance in crop plants is the most favorable means of disease control. In a gain-of-function screen using an activation-tagged Arabidopsis mutant collection, we identified four mutants, A1 to A4, which displayed enhanced resistance toward the vascular wilt species Verticillium dahliae, V. albo-atrum and V. longisporum but not to Fusarium oxysporum f. sp. raphani. Further testing revealed that mutant A2 displayed enhanced Ralstonia solanacearum resistance, while mutants A1 and A3 were more susceptible toward Pseudomonas syringae pv. tomato. Identification of the activation tag insertion site in the A1 mutant revealed an insertion in close proximity to the gene encoding AHL19, which was constitutively expressed in the mutant. AHL19 knock-out alleles were found to display enhanced Verticillium susceptibility whereas overexpression of AHL19 resulted in enhanced Verticillium resistance, showing that AHL19 acts as a positive regulator of plant defense.

Activation tagging with En/Spm-I /dSpm transposons in Arabidopsis

Activation tagging is a powerful strategy to find new gene functions, especially from genes that are redundant or show lethal knock-out phenotypes. It has been applied using T-DNA or transposons. En/Spm-I/dSpm engineered transposons are efficient Activation tags in Arabidopsis. An immobilized transposase source and an enhancer-bearing non-autonomous element are used in combination with positive and negative selectable markers to generate a population of single or low copy, stable insertions. This method describes the steps required to select the best parental lines, generate a population of stable insertions, and gene identification.

Activation tagging and insertional mutagenesis in barley

The process of activation tagging in plants involves the random distribution of plant regulatory sequences throughout the genome. The insertion of a regulatory sequence in the vicinity of an endogenous gene can alter the transcriptional pattern of this gene resulting in a mutant phenotype that arises from excess functional gene product. Activation tagging has been undertaken extensively in a number of dicot plants and also in rice. This has been achieved primarily by high-throughput plant transformation using T-DNA sequences that encode regulatory elements. Apart from rice, most cereals do not have a suitably efficient transformation system for high-throughput transformation. In this article, we detail an activation tagging system in barley that exploits the mobility of the maize Ac/Ds transposable element system to distribute a highly expressed promoter throughout the barley genome. The advantage of this approach in this species is that a relatively small number of primary transgenics are required to generate an activation tagging population. Insertion of this transposable element into genes can also generate insertional inactivation mutants enabling both gene overexpression and gene knockout mutants to be identified in the same population.

Transposon-based activation tagging in cereals

Advances in DNA sequencing technologies have produced an ever increasing number of sequenced genomes. However, many of the genes identified in these sequencing efforts have unknown functions or functions inferred based upon sequence homology, highlighting the necessity for functional gene analysis. Mutagenesis combined with phenotypic analyses remains a key mechanism for identifying and establishing gene function. Activation tagging is a mutagenic process that uses altered gene expression, usually gene overexpression, to generate mutant phenotypes. We have developed an activation tagging system in barley (Hordeum vulgare L.) based upon a maize (Zea mays L.) transposable element that carries two highly expressed cereal promoters. Insertion of this mobile genetic element in the genome can lead to insertional gene inactivation, gene overexpression and gene silencing through the production of antisense transcripts. This transposable element system has also been introduced into both wheat (Triticum aestivum L.) and maize and transposon mobility observed.

A barley activation tagging system

Activation tagging, as the result of random genomic insertion of either promoter or enhancer sequences, can produce novel, dominant mutations by over-expression of endogenous genes. This powerful genomics tool has been used extensively in dicot species such as Arabidopsis, while rice is the only cereal for which an equivalent system exists. In this study we describe an activation tagging system in barley based upon the maize Ac/Ds transposable element system. A modified Ds element (UbiDs) containing two maize polyubiquitin promoters, transposed in families derived from multiple independent UbiDs transformants and generated new Ds insertion events at frequencies ranging from 0% to 52% per family. The majority of transposed UbiDs elements activated high levels of adjacent flanking sequence transcription. Transposon-mediated expression was detected in all barley cell and tissue types analysed suggesting that this system is applicable to all aspects of plant development and biogenesis. In addition to transcriptional activation, this system is also capable of generating insertional knockout mutants and a UbiDs inactivated allele of the granule bound starch synthase I gene (waxy) was recovered that lead to reduced amylose accumulation. The recovery and analysis of dominant over-expression phenotypes generated by this system will provide a novel approach to understanding gene function in large cereal genomes where gene redundancy may mask conventional loss-of-function mutations.

Wheat rust resistance research at CSIRO

Although chemical control is available for rust diseases in wheat, economic and environmental factors favour genetic solutions. Maintenance and improvement of levels of resistance and durability of the genetic control of the 3 wheat rust diseases will occur with the application of DNA markers for pyramiding resistance genes. Information about the molecular basis of rust resistance, including durable, adult-plant resistance, coming from studies in model species such as flax and flax rust and from studies of wheat and barley, will provide knowledge for new biotechnological approaches to rust resistance. Increasing cereal gene sequence data will improve the efficiency of cloning disease resistance genes and, together with the rapid progress in understanding the molecular basis of rust resistance, will make it possible to construct transgenic plants with multiple rust resistance genes at a single locus, which will provide efficient breeding and increased durability of rust resistance.