Administration of chromium picolinate and meloxicam alleviates regrouping stress in dairy heifers

OBJECTIVE

This research investigated the effect of administering chromium (Cr) and meloxicam (MEL) on growth performance, cortisol and blood metabolite, and behaviors in young, regrouped heifers.

METHODS

Fifty Holstein dairy heifers (body weight [BW] 198±32.7 kg and 6.5±0.82 months of age) were randomly assigned to non-regrouped group or four regrouped groups. Non-regrouped animals were held in the same pen throughout the entire experimental period (NL: non-regrouping and administration of lactose monohydrate [LM; placebo]). For regrouping groups, two or three heifers maintained in four different pens for 2 weeks were regrouped into a new pen and assigned to one of four groups: regrouping and LM administration (RL); regrouping and Cr administration (RC); regrouping and MEL administration (RM), and regrouping and Cr and MEL administration (RCM). LM (1 mg/kg BW), Cr (0.5 mg Cr picolinate/kg dry matter intake), and MEL (1 mg/kg BW) were orally administered immediately before regrouping. Blood was collected before regrouping (0 h) and at 3, 9, and 24 h and 7 and 14 d thereafter. Behaviors were recorded for 7 consecutive days after regrouping.

RESULTS

Average daily gain was lower (p<0.05) in RL than NL heifers, but was higher (p<0.05) in RM, RC, and RCM than RL heifers. RL heifers had higher (p<0.05) cortisol than NL heifers on d 1 after regrouping. The cortisol concentrations in RC, RM, and RCM groups were lower (p<0.05) than in RL treatment 1 d after regrouping. Displacement behavior was greater (p<0.05) in RL group than all other groups at 2, 3, and 6 d after regrouping.

CONCLUSION

Regrouping caused temporal stress, reduced growth performance, and increased displacement behavior in heifers. Administering Cr and MEL recovered the retarded growth rate and reduced displacement behavior, thereby alleviating regrouping stress.

Welfare of beef cattle in Australian feedlots: a review of the risks and measures

The rising global demand for animal protein is leading to intensification of livestock production systems. At the same time, societal concerns about sustainability and animal welfare in intensive systems is increasing. This review examines the risks to welfare for beef cattle within commercial feedlots in Australia. Several aspects of the feedlot environment have the potential to compromise the physical and psychological welfare of cattle if not properly monitored and managed. These include, but are not limited to, animal factors such as the influence of genetics, temperament and prior health, as well as management factors such as diet, pen design, resource provision, pregnancy management, and stock-person attitudes and skills. While current industry and producer initiatives exist to address some of these issues, continuous improvements in welfare requires accurate, reliable and repeatable measures to allow quantification of current and future welfare states. Existing measures of welfare are explored as well as proxy indicators that may signal the presence of improved or reduced welfare. Finally, potential future measures of welfare that are currently under development are discussed and recommendations for future research are made.

High Oxygen Modified Atmosphere Packaging Negatively Influences Consumer Acceptability Traits of Pork

Current trends in meat packaging have seen a shift from conventional overwrap to vacuum packing (VAC) and modified atmosphere packaging (MAP). The aim of this experiment was to investigate the effects of high oxygen MAP (HiOxMAP) of pork loins compared with vacuum packed (VAC) on eating quality and colour, after storage in simulated illuminated retail display conditions. Pork loins (n = 40) were cut and stored under two packaging methods (HiOxMAP, 80% O₂, 20% CO₂; VAC) for up to 14 days, with samples taken at various times for measurements. After 7 days of storage, HiOxMAP samples exhibited inferior consumer acceptability for tenderness, flavor, overall liking, quality and re-purchase intention as well as higher shear force and hardness, relative to VAC samples (p < 0.05 for all). Loins stored in HiOxMAP had higher lightness (L*), redness (a*) and yellowness (b*) values at 3 and 7 days, but lower ratio of oxymoglobin to metmyoglobin (oxy/met) values in the meat surface at 14 days of display, relative to VAC samples (p < 0.05 for all). The oxy/met ratio declined from 2.3 to 1.7 between days 3 and 14 of display in HiOxMAP samples (p < 0.05), whereas the ratio was similar and stayed relatively high for VAC samples. VAC samples produced consistently higher colour values (a*, b*, oxy/met) when left to bloom 30 min after removal from packaging (p < 0.05). Lipid oxidation values, measured using thiobarbituric acid reactive substances, in HiOxMAP pork loins, were higher at all time points compared to VAC during the 14 day storage period (p < 0.05). The use of vacuum packing for retail shelves, should be considered as the preferred option, over HiOxMAP.

The Impact of Pre-Slaughter Stress on Beef Eating Quality

Simple Summary

Consumer satisfaction is essential to the beef industry to ensure return protein purchasing. The Meat Standards Australia grading system has been pivotal in regulating the quality and consistency of meat palatability by creating objective measurements such as carcass characteristics, genetics systems, and production systems to predict consumer eating quality. One of the main objective measurements for carcass compliance is the ultimate pH of the longissimus thoracis et lumborum; however, recent research has demonstrated that pre-slaughter stress is eroding beef eating quality in pH compliant carcasses. Pre-slaughter mixing and transport was associated with lower eating quality in certain cuts. A two-week rest period at the abattoir prior to slaughter was beneficial for improving consumer sensory eating quality scores. Further research is required to determine if the muscle damage enzyme creatine kinase could be used commercially as an objective measurement to identify which cattle could benefit from a pre-slaughter rest period to improve beef quality.

Abstract

The study evaluated the relationship between pre-slaughter stress, plasma biomarkers and consumer-evaluated eating quality of pasture raised beef cattle (n = 488). The design tested steer only, heifer only and mixed sex cattle with a comparison of direct kill versus a 14 day rest period in abattoir holding paddocks prior to slaughter. Experiment One sourced cattle from four farms and tested shipping and road transport. Experiment Two sourced cattle from four farms and tested a commercial saleyard pathway. The impact on treatment on untrained consumer eating quality scores were tested on five muscle groups, m. psoas major, m. longissimus dorsi lumborum, m. biceps femoris, m. semitendinosis, and m. infraspinatus. Across all muscles, a two-week rest period had the biggest improvement in sensory score. Mixed groups scored lower in the outside muscle than non-mixed groups. However, the mixing response was inconsistent in the eye round muscle and not significant in the other muscles. Plasma glucose and L-lactate indicated a marked acute stress response at slaughter with a small detrimental impact on consumer score. The muscle damage enzyme markers creatine kinase (CK) and aspartate aminotransferase (AST) were strongly associated with a lower meat quality score (MQ4). Neither β-hydroxybutyrate (βHB) nor non-esterified fatty acids (NEFA) were associated with MQ4, suggesting that fat mobilisation does not impact consumer sensory score.

Assessing feed efficiency in beef steers through feeding behavior, infrared thermography and glucocorticoids

A better understanding of the factors regulating feed efficiency and their potential as predictors of feed efficiency in cattle is needed. Therefore, the potential of three classes of traits, namely, feeding behavior characteristics: daily time at feeder (TF; min/day), time per meal (TM; min), meal size (MS; g DM), eating rate (ER; g DM/min), number of daily meals (NM) and daily visits to the feeder (VF); infrared (IR) thermography traits (°C): eye (EY), cheek (CK), snout (SN), ribs (RB) and hind area (HA); and glucocorticoid levels: fecal cortisol metabolites (FCM; ng/g) and plasma cortisol (PC; ng/ml) as predictors of efficiency were evaluated in 91 steers (436 ± 37 kg) over 2 years (Y1 = 46; Y2 = 45). Additionally, the individual traits of each of these three classes were combined to define three single traits. Individual daily feed intake of a corn silage and high-moisture corn-based diet was measured using an automated feeding system. Body weight and thermographs were taken every 28 days over a period of 140 days. Four productive performance traits were calculated: daily dry matter intake (DMI), average daily gain (ADG), feed to gain ratio (F : G) and residual feed intake (RFI). Steers were also classified into three RFI categories (low-, medium- and high-RFI). Among the feeding behavior characteristics, MS and ER were correlated with all efficiency traits (range: 0.26 to 0.75). Low-RFI (more efficient steers) had smaller MS, lower ER and fewer VF in comparison to high-RFI steers. Less efficient steers (high-RFI) performed more VF during the nocturnal period than more efficient steers. More efficient steers had lower CK and SN temperatures than less efficient steers (28.1°C v. 29.2°C and 30.0°C v. 31.2°C), indicating greater energetic efficiency for low-RFI steers. In terms of glucocorticoids, PC was not correlated with efficiency traits. In contrast, more efficient steers had higher FCM in comparison to less efficient steers (51.1 v. 31.2 ng/g), indicating that a higher cortisol baseline is related to better feed efficiency. The overall evaluation of the three classes of traits revealed that feeding behavior, IR thermography and glucocorticoids accounted for 18%, 59% and 7% of the total variation associated with RFI, respectively. These classes of traits have usefulness in the indirect assessment of feed efficiency in cattle. Among them, IR thermography was the most promising alternative to screen cattle for this feed efficiency. These findings might have application in selection programs and in the better understanding of the biological basis associated with productive performance.

Genetic and environmental effects on meat quality

In order for livestock industries to consistently produce high quality meat, there must be an understanding of the factors that cause quality to vary, as well as the contribution of genetics. A brief overview of meat tenderness is presented to understand how genotype and environment may interact to influence this trait. Essentially, meat tenderness is determined from the contribution of connective tissue, sarcomere length determined pre-rigor and rate of proteolysis during ageing, as well as contributions from intramuscular fat and post-mortem energy metabolism. The influence of mutations in myostatin, the callipyge gene, the Carwell or rib eye muscle gene as well as the calpain system on meat tenderness is presented. Specific examples of interactions between the production or processing environment and genetics are presented for both sheep and cattle. The day-to-day variation in tenderness is evident across experiments and this variation needs to be controlled in order to consistently produce tender meat.

Evolution of the Meat Standards Australia (MSA) beef grading system

The Australian Beef Industry identified variable eating quality as a major contributor to declining beef consumption in the early 1990s and committed research funding to address the problem. The major issue was the ability to predict the eating quality of cooked beef before consumption. The Meat Standards Australia (MSA) program developed a consumer testing protocol, which led to MSA grading standards being defined by consumer score outcomes. Traditional carcass grading parameters proved to be of little value in predicting consumer outcomes. Instead a broader combination of factors forms the basis of an interactive prediction model that performs well. The grading model has evolved from a fixed parameter ‘Pathway’ approach, to a computer model that predicts consumer scores for 135 ‘cut by cooking method’ combinations for each graded carcass. The body of research work conducted in evaluating critical control points and in developing the model predictions and interactions has involved several Australian research groups with strong support and involvement from the industry.