Optimal conditions for beef tenderization through radiofrequency heating with cold air

High-temperature (15-37°C) aging can shorten the tenderizing time of beef; however, the use of constant temperature heating can lead to microbial spoilage. This study tested radiofrequency (RF) tenderization (RF-T) to find the appropriate conditions for the aging-like effect of beef without microbial spoilage. After subjecting beef to 22 h RF-T with four different cooling temperatures (15, 5, -10, and -20°C), the proliferated aerobic bacteria on the surface showed a concentration of 6-6.2 log CFU/g at -10 and -20°C, lower than 7-7.5 log CFU/g at 15 and 5°C. When beef was treated with 25 W/kg RF heating power for 48 h RF-T, the estimated reduction rate of the sliced shear force (SSF) and the increase rate of glutamic acid based on the weight before RF-T were 22.6% and 1.51-fold, which were greater than 19.6% and 1.37-fold with 20 W/kg, and 11.0% and 1.11-fold with 15 W/kg. The optimal specific RF heating power was calculated as 30 W/kg from the results' extrapolation. When processed for 48 h under optimal conditions (30 W/kg specific RF heating power, -20°C cooling air), the tenderization rate and the increased rates of free amino acids based on the weight before RF-T of beef reached over 20% and 1.5-fold with 5.22 log CFU/g aerobic bacteria, which was lesser than the Korean regulation value of 6.7 log CFU/g (5 × 106  CFU/g). Therefore, RF-T could be proposed as a promising high-temperature tenderization method with lowered risk of microbial spoilage. PRACTICAL APPLICATION: We showed that lowering the chamber temperature during RF-T was effective in surface drying and inhibiting aerobic bacteria. RF-T for 24-48 h with 30 W/kg specific RF heating power had an aging-like effect given tenderization and increase in FAAs. Moreover, by providing the matching circuit and impedance during RF-T, this method could be industrially reproducible.

Prediction of tenderness in bovine longissimus thoracis et lumborum muscles using Raman spectroscopy

OBJECTIVE

This study was conducted to evaluate Raman spectroscopy technique as a noninvasive tool to predict meat quality traits on Braford longissimus thoracis et lumborum muscle.

METHODS

Thirty samples of muscle from Braford steers were analyzed by classical meat quality techniques and by Raman spectroscopy with 785 nm laser excitation. Water holding capacity (WHC), intramuscular fat content (IMF), cooking loss (CL), and texture profile analysis recording hardness, cohesiveness, and chewiness were determined, along with fiber diameter and sarcomere length by scanning electron microscopy. Warner-Bratzler shear force (WBSF) analysis was used to differentiate tender and tough meat groups.

RESULTS

Higher values of cohesiveness and CL, together with lower values of WHC, IMF, and shorter sarcomere were obtained for tender meat samples than for the tougher ones. Raman spectra analysis allows tender and tough sample differentiation. The correlation between the quality attributes predicted by Raman and the physical measurements resulted in values of R2 = 0.69 for hardness and 0,58 for WBSF. Pearson's correlation coefficient of hardness (r = 0.84) and WBSF (r = 0.79) parameters with the phenylalanine Raman signal at 1,003 cm-1, suggests that the content of this amino acid could explain the differences between samples.

CONCLUSION

Raman spectroscopy with 785 nm laser excitation is a suitable and accurate technique to identify beef with different quality attributes.

French consumer evaluation of eating quality of Angus x Salers beef: Effects of muscle cut, muscle slicing and ageing

Based on the Meat Standards Australia (MSA) methodology, the objectives of this study were to evaluate the eating quality of grass-fed Angus x Salers beef by French consumers, across different muscle cuts (m. triceps brachii caput longum, m. longissimus dorsi et thoracis and m. rectus abdominis), ageing times (5 and 14 days) and muscle slicing and grilling methods (being distinguished by 2 different sides on the grill), and to further quantify whether the MSA model could predict the eating quality of the meat produced by these lean crossbred animals. The results showed that French consumers can discern significant differences in eating quality traits across muscle cuts but not between ageing times and muscle slicing methods. In this study, the accuracy of eating quality score (MQ4)-assigned MSA grade was 64.5%. Due to the lack of MSA data on these lean crossbred animals, the prediction of eating quality from carcass characteristics was less accurate than usual. However, these results do indicate that the MSA sensory testing protocol, the MQ4 calculation and the MSA quality grades could be used to support a consumer-based quality grading system in France.

Consumer Perception of Beef Quality and How to Control, Improve and Predict It? Focus on Eating Quality

Quality refers to the characteristics of products that meet the demands and expectations of the end users. Beef quality is a convergence between product characteristics on one hand and consumers’ experiences and demands on the other. This paper reviews the formation of consumer beef quality perception, the main factors determining beef sensory quality, and how to measure and predict beef eating quality at scientific and industrial levels. Beef quality is of paramount importance to consumers since consumer perception of quality determines the decision to purchase and repeat the purchase. Consumer perception of beef quality undergoes a multi-step process at the time of purchase and consumption in order to achieve an overall value assessment. Beef quality perception is determined by a set of quality attributes, including intrinsic (appearance, safety, technological, sensory and nutritional characteristics, convenience) and extrinsic (price, image, livestock farming systems, commercial strategy, etc.) quality traits. The beef eating qualities that are the most valued by consumers are highly variable and depend mainly on the composition and characteristics of the original muscle and the post-mortem processes involved in the conversion of muscle into meat, the mechanisms of which are summarized in this review. Furthermore, in order to guarantee good quality beef for consumers in advance, the prediction of beef quality by combining different traits in scenarios where the animal, carcass, and muscle cuts can be evaluated is also discussed in the current review.

All-trans retinoic acid alters the expression of adipogenic genes during the differentiation of bovine intramuscular and subcutaneous adipocytes

The present study was designed to determine the influence of all-trans retinoic acid (ATRA) on adipogenesis-related gene regulation in bovine intramuscular (IM) and subcutaneous (SC) adipose cells during differentiation. Bovine IM and SC adipocytes were isolated from three 19-mo-old, crossbred steers. Adipogenic differentiation was induced upon cultured IM and SC preadipocytes with various doses (0, 0.001, 0.01, 0.1, 1 µM) of ATRA. After 96 h of incubation, cells were harvested and used to measure the gene expression of CCAAT/Enhancer binding protein β (C/EBPβ), peroxisome proliferator-activated receptor (PPAR) γ, glucose transporter 4 (GLUT4), stearoyl CoA desaturase (SCD), and Smad transcription factor 3 (Smad3) relative to the quantity of ribosomal protein subunit 9 (RPS 9). Retinoic acid receptor (RAR) antagonist also tested to identify the effect of ATRA on PPARγ -RAR related gene expression in IM cells. The addition of ATRA to bovine IM decreased (p < 0.05) expression of PPARγ. The expression of PPARγ was also tended to be downregulated (p < 0.1) in high levels (10 μM) of ATRA treatment in SC cells. The treatment of RAR antagonist increased the expression of PPARγ in IM cells. Expression of C/EBPβ decreased (p < 0.05) in SC, but no change was observed in IM (p > 0.05). Increasing levels of ATRA may block adipogenic differentiation via transcriptional regulation of PPARγ. The efficacy of ATRA treatment in adipose cells may vary depending on the location.

Comparison of Nutritional and Meat Quality Characteristics between Two Primal Cuts from Aceh Cattle in Aceh Province, Indonesia

The Aceh cattle are local Indonesian beef cattle that are farmed in Aceh Province. This type of cattle is one of the sources of meat for the Aceh people. This study aims to analyze the quality of two primal cuts (longissimus lumborum and semitendinosus muscle) from Aceh cattle based on the muscle microstructure characteristics and MSTN gene expression. This study used a sample of longissimus lumborum and semitendinosus muscles from 18 adult male Aceh cattle with the age of 2-2.5 years and a BCS of 3.24. Muscle samples were obtained shortly after the cattle were slaughtered in slaughterhouses in Banda Aceh and Aceh Besar districts. Muscle microstructure analysis was performed using the HE, Masson's trichrome, and immunohistochemistry staining methods, while the MSTN gene expression analysis was performed using the qPCR method. The analysis of the physical quality of meat includes pH, meat color, fat color, cooking loss, water holding capacity, and WBSF value. The results showed that the area of LL muscle fibers was smaller than that of ST with relatively the same diameter. Both muscles were dominated by fast fibers with a percentage of 82.37% (LL muscle) and 91.80% (ST muscle). The area and composition of the type of muscle fibers are the main factors that influence the tenderness of Aceh beef. A higher distribution of collagen was found in ST muscles than in LL muscles. MSTN gene expression in both muscle types was relatively the same. Aceh cattle have large muscle fibers and are dominated by fast fibers with a high percentage, resulting in a low level of the tenderness of Aceh beef. However, the level of tenderness of Aceh beef is still in accordance with the cooking preparation of original and favorite cuisine of Aceh people.

Effects of Feeding and Maturation System on Qualitative Characteristics of Buffalo Meat (Bubalus bubalis)

We aimed to evaluate the effects of post dry ageing (PDA) period on meat colour and rheological characteristics in 16 buffalo bulls fed two different diets: with (FRS) or without (CTL) rye grass. Animals were randomly divided into two feeding groups and slaughtered at 540 ± 4.7 and 533 ± 7.0 kg of live body weight, respectively, for the CTL and FRS group. After five days post-mortem ageing (T0), Semitendinosus muscle (ST) and Longissimus muscle (LD) underwent a prolonged maturation process in a controlled meat chamber for 30 days (ST) and until 60 days (LD). After 30 days (T1), significant changes (p < 0.01) in meat colour (ΔE) in both muscles of the FRS group was recorded, while no significant change was observed in CTL group. The FRS diet had a positive effect on textural properties of ST muscle compared to CTL diet, as well as hardness, chewiness and gumminess. All qualitative characteristics improved in the first period of PDA but, whereas LD showed to keep improving, extending the post-ageing period by further 30 days, the ST becomes un-processable at 60 days. In conclusion, a combined used of fresh feeding and PDA period could enhance both tenderness and colour in animal fed FSR.

Preliminary investigation for the prediction of intramuscular fat content of lamb in-situ using a hand- held NIR spectroscopic device

Intramuscular fat (IMF) content is critical in the determination of eating quality. At present the Australian lamb industry has no ability to measure IMF as carcases are not split and processing speeds of up to 15 animals per minute prohibit the use of traditional methods. Consequently, the potential for a hand-held Near- Infrared (NIR) device to predict the IMF content of lamb topside in-situ was investigated. Models demonstrated that there is an ability to predict the IMF content of topside (R² = 0.58, RMSEP = 0.85) using NIR spectra collected at 24 h post-mortem and loin (R² = 0.50, RMSEP = 0.91). However, the models were limited by the range and distribution of the lamb population measured. Thus, further research is required to determine whether these models can be improved by increasing the range of data in the calibration models and considering alternate methods of analysis which are suitable for skewed populations.

Regional, socioeconomic and behavioural- impacts on consumer acceptability of beef in Northern Ireland, Republic of Ireland and Great Britain

This study was commissioned to assess if there are regional differences in the acceptability of beef between consumers from Northern Ireland (NI), Republic of Ireland (ROI) and Great Britain (GB). Palatability traits were affected by socioeconomic and behavioural factors such as preferred cooking endpoint, animal welfare, value, health aspects of beef product, ease of preparation as well as consumption frequency for specific cuts. "Willingness to pay" (WTP) was influenced by income, preferred cooking endpoint, value of beef product, ease of preparation and consumption frequency for frying steak. Results showed that GB consumers scored higher for the same striploin steak compared to NI and ROI consumers. This may be due to differences in the motivation for beef choice and/or consumption habits. GB consumers were less concerned about the healthiness of beef product and beef origin. In addition, a higher consumption frequency for rump was reported in GB, which may explain the higher sensory scores observed among GB consumers for striploins.

Distribution of Marbling Throughout the M. Longissimus Thoracis et Lumborum of Beef Carcasses Using an Instrument-Grading System

Beef Loin, Strip Loins (IMPS #180; n = 20) with marbling scores between Modest00 and Modest30 at the 12th and 13th rib interface of the M. longissimus thoracis et lumborum (LL) were collected. Each strip loin was fabricated into 6 samples taken perpendicular to the long axis of the LL from the 13th thoracic vertebra to the fifth lumbar vertebra with the cut made on the anterior side of the respective vertebra. A Computer Vision System Cold Camera measured the LL cross-section of each sample location for USDA marbling score, marbling distribution, average marbling fleck size, LL area, LL length (distance medial to lateral), and LL width (distance dorsal to ventral). In the present study, mean LL marbling score decreased (P < 0.05) from the second lumbar vertebrae location to the fifth lumbar vertebrae location. Marbling size and marbling distance were the smallest (P < 0.05) in samples from the 13th thoracic vertebrae location. The LL area and width was largest (P < 0.05) for the samples from the most anterior location and thus decreased (P < 0.05) as the samples became more posterior. Samples from the most posterior end of the strip loin were the longest (P < 0.05) in length. It was observed that marbling score, distribution, and size, as well as, LL area, length, and width vary from anterior to posterior in the strip loin which can have potential marketing implications for food service distributors and retailers.

Factors affecting lamb eating quality and the potential for their integration into an MSA sheepmeat grading model

Major efforts in the sheep industry to control eating quality have resulted in reduced product variability. Yet inconsistent eating quality for consumers remains, due to a degree of inaccurate representation of cut quality. Eating quality defined through a complex interplay of different factors can be predicted for individual cuts, and Meat Standards Australia (MSA) grading schemes have been developed to achieve these defined quality outcomes. This review outlines the justifications to refine the current sheepmeat MSA pathways system to transition into a cuts-based prediction model and details some of the factors affecting sheepmeat eating quality as key factors under consideration into the new model. The development of the new sheepmeat MSA prediction model will allow for more efficient carcass sorting to underpin a value based payment system throughout the supply chain. However it requires the inclusion of individual carcass yield and eating quality measurements (i.e. IMF). Furthermore, the adoption challenges internationally of an MSA like model are discussed.

Evaluation of the contribution of tenderness, juiciness, and flavor to the overall consumer beef eating experience

The objectives of this study were to evaluate the contribution of tenderness, juiciness, and flavor to the overall consumer beef eating experience and to evaluate the risk of overall palatability failure due to the unacceptable level of one or more of these traits. Data from 11 previously conducted studies representing a wide range of treatments and levels of eating quality that included more than 1,500 beef samples and 1,800 consumers were compiled and analyzed for this study. Results of a multivariate regression indicated that tenderness, flavor, and juiciness accounted for 43.4%, 49.4%, and 7.4%, respectively, of overall palatability (P < 0.05; R² > 0.99). Additionally, the odds of a steak being rated unacceptable overall when tenderness, juiciness, or flavor were rated unacceptable were 2.2 to 1 (69%), 1.9 to 1 (66%), and 3.3 to 1 (77%), respectively. This indicated overall palatability was 7.2, 6.5, and 12.3 times more likely to be rated unacceptable if tenderness, juiciness, or flavor, respectively, was also rated unacceptable. Additionally, the percentage of samples rated acceptable for each palatability trait increased (P < 0.05) as quality grade increased. More than 88% of USDA Prime samples were rated acceptable for each palatability trait, whereas only 74.8–77.3% of USDA Select samples were rated acceptable for each palatability trait. Marbling score accounted for 14–16% of the variation (P < 0.01) in consumer palatability scores for each trait and intramuscular fat percentage accounted for 17–21% of the variation in each trait (P < 0.01). Logistic equation models for the predicted probability of an acceptable rating for each palatability trait based on intramuscular fat percentage accounted for only a minimal amount of variation (P < 0.01; R² ≤ 0.09). Results of this study indicate the relative contribution of tenderness, juiciness, and flavor to overall beef palatability. They provide evidence that the failure of even a single palatability trait dramatically increases the likelihood of overall palatability failure, indicating that no single palatability trait is most important, as beef palatability is dependent upon the acceptance of all three traits: tenderness, juiciness, and flavor.

Carcass grading characteristics of serially harvested calf-fed Holstein steers fed zilpaterol hydrochloride

Serial harvests were conducted using Holstein steers ( = 110) fed zilpaterol hydrochloride (ZH) for 0 or 20 d prior to harvest. Steers were harvested in 28-d increments beginning at 254 d on feed (DOF) and ending at 534 DOF. After harvest and a 36-h chill period, carcasses were evaluated using grading methods standard for the United States (USDA), Canada (Canadian Beef Grading Association [CBGA]), and Japan (Japanese Meat Grading Agency [JMGA]). No ZH treatment differences ( = 0.81) were detected for 12th-rib fat thickness; however, additional DOF resulted in a daily linear increase ( < 0.01) of 12th-rib fat thickness by 0.004 cm/d. Longissimus muscle area was increased ( < 0.01) by 8.7 cm with ZH supplementation and linearly increased ( < 0.01) 0.08 cm2/d with additional DOF. Calculated USDA yield grade (YG) decreased ( < 0.01) 0.33 units due to ZH treatment and linearly increased ( < 0.01) 0.009 units/d. Steers supplemented with ZH exhibited increased ( < 0.01) CGBA LM width; however, no difference ( = 0.37) was detected in CGBA LM length. No ZH treatment differences ( = 0.64) were observed for CBGA fat class; however, CGBA fat class linearly increased ( < 0.01) by 0.01 units/d. No ZH differences ( ≥ 0.17) were detected for the CBGA estimated lean percentage or YG equations. Evaluation for JMGA occurs at the sixth and seventh rib interface; LM area was 4.6 cm2 greater ( = 0.02) for cattle supplemented with ZH and linearly increased ( < 0.01) by 0.07 cm2/d with additional DOF. Subcutaneous fat thickness was not different among ZH treatments ( = 0.10) but linearly ( < 0.04) increased ( < 0.01) by 0.005 cm/d with additional DOF using the JMGA grading method. No difference ( ≥ 0.21) was calculated between ZH treatments or DOF for JMGA estimated yield. No ZH treatment differences ( = 0.85) were detected in USDA marbling score; however, marbling linearly increased ( < 0.01) 0.07 units/d. These data illustrate the impact of ZH and increasing DOF on economically important carcass grading outcomes used in the USDA, CBGA, and JMGA grading programs.

Modelling of beef sensory quality for a better prediction of palatability

Despite efforts by the industry to control the eating quality of beef, there remains a high level of variability in palatability, which is one reason for consumer dissatisfaction. In Europe, there is still no reliable on-line tool to predict beef quality and deliver consistent quality beef to consumers. Beef quality traits depend in part on the physical and chemical properties of the muscles. The determination of these properties (known as muscle profiling) will allow for more informed decisions to be made in the selection of individual muscles for the production of value-added products. Therefore, scientists and professional partners of the ProSafeBeef project have brought together all the data they have accumulated over 20 years. The resulting BIF-Beef (Integrated and Functional Biology of Beef) data warehouse contains available data of animal growth, carcass composition, muscle tissue characteristics and beef quality traits. This database is useful to determine the most important muscle characteristics associated with a high tenderness, a high flavour or generally a high quality. Another more consumer driven modelling tool was developed in Australia: the Meat Standards Australia (MSA) grading scheme that predicts beef quality for each individual muscle×specific cooking method combination using various information on the corresponding animals and post-slaughter processing factors. This system has also the potential to detect variability in quality within muscles. The MSA system proved to be effective in predicting beef palatability not only in Australia but also in many other countries. The results of the work conducted in Europe within the ProSafeBeef project indicate that it would be possible to manage a grading system in Europe similar to the MSA system. The combination of the different modelling approaches (namely muscle biochemistry and a MSA-like meat grading system adapted to the European market) is a promising area of research to improve the prediction of beef quality. In both approaches, the volume of data available not only provides statistically sound correlations between various factors and beef quality traits but also a better understanding of the variability of beef quality according to various criteria (breed, age, sex, pH, marbling etc.).

Effect of low- and high-forage diets on meat quality and fatty acid composition of Alentejana and Barrosã beef breeds

This study investigated the effects of genotype and diet on meat fat composition and palatability obtained from Alentejana (AL) and Barrosã (BA) breeds. Herein, 20 males from each breed allocated at 11 months of age were fed ad libitum a low-forage diet or a high-forage diet and slaughtered at 18 months of age. Trained sensory panel analysis found that the longissimus lumborum (Ll) muscle from BA had higher tenderness, juiciness and overall acceptability scores than the AL breed. The highest scores for those attributes were observed in the BA breed fed the high-forage diet. Regarding the semitendinosus (St) muscle, breed was a source of variation of tenderness scores. In contrast to the Ll muscle, the highest tenderness scores for the St muscle were observed in the AL breed. The intramuscular fat (IMF) content was positively correlated with tenderness, juiciness and overall acceptability in Ll muscle and negatively correlated with flavour in the St muscle. The levels of 14:0 and 16:0, 16:1c9, 18:1c9 and 18:1c11 were positively correlated to juiciness, tenderness and overall acceptability in the Ll muscle. These correlations were not observed in the St muscle, which may be related to its low IMF content. Nonetheless, negative correlations were observed for the St muscle between flavour and 14:0, 16:0 and 18:0 FA contents.The IMF varied widely in the Ll but not in the St muscle. The latter had higher levels of 16:1c9 and trans fatty acids (∑TFA) in the BA than in the AL breed. Regarding the Ll muscle, the BA had higher amounts of 14:0, 16:0, 16:1c9, 18:0, 18:1c9, 18:1c11, saturated fatty acids (∑SFA), cis monounsaturated fatty acids (∑cis MUFA), ∑TFA and n-3 polyunsaturated fatty acids (∑n-3 PUFA) than the AL breed. The diet exerted an influence on the IMF content and on the levels of 14:0, 16:0, 16:1c9, 18:0, 18:1c9, 18:1c11, ∑SFA, ∑cis MUFA and ∑TFA in both Ll and St muscles. Moreover, the levels of ∑n-3 PUFA in the Ll muscle and 18:2n-6, 20:4n-6, ∑n-6 PUFA and ∑PUFA in the St muscle were influenced by diet. The results obtained in this study, with two Portuguese breeds, confirm that genetic background plays a major role in the determination of meat eating quality.

The challenge and limitations of combining data: a case study examining the relationship between intramuscular fat content and flavour intensity based on the BIF-BEEF database

The BIF-BEEF (Beef Integrated and Functional Biology) data warehouse for muscle biology to predict beef quality gathers data related to bovines, their carcasses and their beef. These data come mainly from three sources: the INRA database named FiLiCol, the European GEMQUAL program and the French QUALVIGENE program databases plus other minor sources. At the beginning of 2011, the BIF-BEEF data warehouse contained 331 745 measurements for 621 variables. Measurements were obtained on eight muscles and/or from 5197 animals (mainly young bulls) belonging to 20 different breeds (mainly Charolais, Limousin, Blonde d’Aquitaine, the three major French beef breeds) from experiments carried out over a 10-year period. A web interface was developed to extract data and to analyse them using basic statistical tools (correlation, variance analysis, etc) with R software. Clearly, since the various experiments were not designed initially to ultimately link together, it appeared very difficult to integrate some data which differ a lot by units, scales or laboratory methods. Ontology will help to address these issues. However, the usefulness of the BIF-BEEF data warehouse is described by studying the relationship in M. longissimus thoracis between intramuscular fat content (IMF) and flavour assessed by sensory panels. When data from different sources or different sensory panels were used, they were corrected for these fixed factors in the regression model. They were also corrected for known sources of variation (sex, breed and age of the animals). On average, the relationship between IMF and flavour was low (partial correlation coefficient r = 0.11) but significant. This relationship was no more significant for breeds with low IMF levels (such as Blonde d’Aquitaine) or for animals with the highest IMF such as steers or females.

Perception in France of the Australian system for the prediction of beef quality (Meat Standards Australia) with perspectives for the European beef sector

Australia has developed the Meat Standards Australia (MSA) grading scheme to predict beef quality for consumers. This system is comprehensive, accurate and scientifically supported. It is based on the development and the use of a research database with a large amount of data, including the use of a large-scale consumer testing system with cuts cooked in different ways as well as information on the corresponding animals, carcasses and cuts. The system is also based on statistical analyses carried out on this database to identify the critical control points of beef palatability which is indicated for individual muscles and for a specific cooking method and aging time. Experts involved in the French beef industry were questioned about their knowledge and views on the application of the MSA system. They recognised many qualities of the MSA system and it was judged as original, relevant and sufficiently mature in its application, and favouring scientifically based prediction of beef quality rather than replying on tradition and perceptions of quality. It was also thought to be credible, flexible and open ended. However, it was still considered to possess some weak points. Thus, while its development in Australia at the farmer and abattoir level has been impressive in a relatively short time, the final delivery of precise quality grades to consumers is still lacking at retail due to only partial implementation of the system. Its adaptability to France would be difficult due to the complexity of the French beef industry and market. But, the program is uniquely innovative and deserves consideration. It will facilitate awareness and induce much needed changes to underpin the preservation and the development of the beef sector in France and eventually in Europe.