The targeting pathway of Escherichia coli presecretory and integral membrane proteins is specified by the hydrophobicity of the targeting signal

Approaches for high-throughput quantification of periplasmic recombinant proteins

The Gram-negative periplasm is a convenient location for the accumulation of many recombinant proteins including biopharmaceutical products. It is the site of disulphide bond formation, required by some proteins (such as antibody fragments) for correct folding and function. It also permits simpler protein release and downstream processing than cytoplasmic accumulation. As such, targeting of recombinant proteins to the E. coli periplasm is a key strategy in biologic manufacture. However, expression and translocation of each recombinant protein requires optimisation including selection of the best signal peptide and growth and production conditions. Traditional methods require separation and analysis of protein compositions of periplasmic and cytoplasmic fractions, a time- and labour-intensive method that is difficult to parallelise. Therefore, approaches for high throughput quantification of periplasmic protein accumulation offer advantages in rapid process development.

A unifying mechanism for protein transport through the core bacterial Sec machinery

Encapsulation and compartmentalization are fundamental to the evolution of cellular life, but they also pose a challenge: how to partition the molecules that perform biological functions-the proteins-across impermeable barriers into sub-cellular organelles, and to the outside. The solution lies in the evolution of specialized machines, translocons, found in every biological membrane, which act both as gate and gatekeeper across and into membrane bilayers. Understanding how these translocons operate at the molecular level has been a long-standing ambition of cell biology, and one that is approaching its denouement; particularly in the case of the ubiquitous Sec system. In this review, we highlight the fruits of recent game-changing technical innovations in structural biology, biophysics and biochemistry to present a largely complete mechanism for the bacterial version of the core Sec machinery. We discuss the merits of our model over alternative proposals and identify the remaining open questions. The template laid out by the study of the Sec system will be of immense value for probing the many other translocons found in diverse biological membranes, towards the ultimate goal of altering or impeding their functions for pharmaceutical or biotechnological purposes.

Ultrafast fluorescence depolarisation in green fluorescence protein tandem dimers as hydrophobic environment sensitive probes

Advances in ultra-fast photonics have enabled monitoring of biochemical interactions on a sub nano-second time scale. In addition, picosecond dynamics of intermolecular energy transfer in fluorescent proteins has been observed. Here, we present the development of a genetically encoded fluorescent sensor that can detect changes in hydrophobicity by monitoring ultrafast fluorescence depolarisation. Our sensor is composed of a pair of dimeric enhanced green fluorescent proteins (dEGFPs) linked by a flexible amino-acid linker. We show dimerisation is perturbed by the addition of glycerol which interferes with the hydrophobic interaction of the two proteins. Time-resolved fluorescence anisotropy revealed a systematic attenuation of ultrafast fluorescence depolarisation when the sensor was exposed to increasing glycerol concentrations. This suggests that as hydrophobicity increases, dEGFP pairing decreases within a tandem dimer. Un-pairing of the protein fluorophores dramatically alters the rate of energy transfer between the proteins, resulting in an increase in the limiting anisotropy of the sensor.

Mechanism of Protein Translocation by the Sec61 Translocon Complex

The endoplasmic reticulum (ER) is a major site for protein synthesis, folding, and maturation in eukaryotic cells, responsible for production of secretory proteins and most integral membrane proteins. The universally conserved protein-conducting channel Sec61 complex mediates core steps in these processes by translocating hydrophilic polypeptide segments of client proteins across the ER membrane and integrating hydrophobic transmembrane segments into the membrane. The Sec61 complex associates with several other molecular machines and enzymes to enable substrate engagement with the channel and coordination of protein translocation with translation, protein folding, and/or post-translational modifications. Recent cryo-electron microscopy and functional studies of these translocon complexes have greatly advanced our mechanistic understanding of Sec61-dependent protein biogenesis at the ER. Here, we will review the current models for how the Sec61 channel performs its functions in coordination with partner complexes.

Selective ribosome profiling reveals a role for SecB in the co-translational inner membrane protein biogenesis

The chaperone SecB has been implicated in de novo protein folding and translocation across the membrane, but it remains unclear which nascent polypeptides SecB binds, when during translation SecB acts, how SecB function is coordinated with other chaperones and targeting factors, and how polypeptide engagement contributes to protein biogenesis. Using selective ribosome profiling, we show that SecB binds many nascent cytoplasmic and translocated proteins generally late during translation and controlled by the chaperone trigger factor. Revealing an uncharted role in co-translational translocation, inner membrane proteins (IMPs) are the most prominent nascent SecB interactors. Unlike other substrates, IMPs are bound early during translation, following the membrane targeting by the signal recognition particle. SecB remains bound until translation is terminated, and contributes to membrane insertion. Our study establishes a role of SecB in the co-translational maturation of proteins from all cellular compartments and functionally implicates cytosolic chaperones in membrane protein biogenesis.

Synonymous Codons and Hydrophobicity Optimization of Post-translational Signal Peptide PelB Increase Phage Display Efficiency of DARPins

DsbA leader peptide targets proteins for cotranslational translocation by signal recognition particle (SRP) pathway and has been the standard signal sequence for filamentous phage display of fast-folding Designed Ankyrin Repeat Proteins (DARPins). In contrast, translocation of DARPins via the post-translational pathway, for example, with the commonly used PelB leader, has been reported to be highly inefficient. In this study, two PelB signal sequence libraries were screened covering different regions of the leader peptide for identifying mutants with improved display of DARPins on phage. A PelB variant with the most favorable combination of synonymous mutations in the n-region and hydrophobic substitutions in the h-region increased the display efficiency of a DARPin library 44- and 12-fold compared to PelB_WT and DsbA, respectively. Based on thioredoxin-1 (TrxA) export studies the triple valine mutant PelB DN5 V3 leader was capable of more efficient cotranslational translocation than PelB_WT, but the overall display efficiency improvement over DsbA suggests that besides increased cotranslational translocation other factors contribute to the observed enhancement in DARPin display efficiency.

The biogenesis of β-lactamase enzymes

The discovery of penicillin by Alexander Fleming marked a new era for modern medicine, allowing not only the treatment of infectious diseases, but also the safe performance of life-saving interventions, like surgery and chemotherapy. Unfortunately, resistance against penicillin, as well as more complex β-lactam antibiotics, has rapidly emerged since the introduction of these drugs in the clinic, and is largely driven by a single type of extra-cytoplasmic proteins, hydrolytic enzymes called β-lactamases. While the structures, biochemistry and epidemiology of these resistance determinants have been extensively characterized, their biogenesis, a complex process including multiple steps and involving several fundamental biochemical pathways, is rarely discussed. In this review, we provide a comprehensive overview of the journey of β-lactamases, from the moment they exit the ribosomal channel until they reach their final cellular destination as folded and active enzymes.

Bacterial Signal Peptides- Navigating the Journey of Proteins

In 1971, Blobel proposed the first statement of the Signal Hypothesis which suggested that proteins have amino-terminal sequences that dictate their export and localization in the cell. A cytosolic binding factor was predicted, and later the protein conducting channel was discovered that was proposed in 1975 to align with the large ribosomal tunnel. The 1975 Signal Hypothesis also predicted that proteins targeted to different intracellular membranes would possess distinct signals and integral membrane proteins contained uncleaved signal sequences which initiate translocation of the polypeptide chain. This review summarizes the central role that the signal peptides play as address codes for proteins, their decisive role as targeting factors for delivery to the membrane and their function to activate the translocation machinery for export and membrane protein insertion. After shedding light on the navigation of proteins, the importance of removal of signal peptide and their degradation are addressed. Furthermore, the emerging work on signal peptidases as novel targets for antibiotic development is described.

Holin-assisted bacterial recombinant protein export

A simple generic method for enhancing extracellular protein yields in engineered bacteria is still lacking. Here, we demonstrated that phage-encoded holin can be used to export proteins to the extracellular medium in both Gram-negative Escherichia coli and -positive Lactococcus lactis. When a putative holin gene LLNZ_RS10380 annotated in the genome of L. lactis NZ9000 (hol380) was recombinantly expressed in E. coli BL21(DE3), the Hol380 oligomerized up to hexamer in the cytoplasmic membrane, yielding membrane pore to allow the passage of cytosolic β-galatosidase (116 kDa), whose extracellular production reached 54.59 U/μL, accounting for 76.37% of the total activity. However, the overexpressed Hol380 could not release cytosolic proteins across the membrane in L. lactis NZ9000, but increased the secretory production of staphylococcal nuclease to 2.55-fold and fimbrial adhesin FaeG to 2.40-fold compared with those guided by signal peptide Usp45 alone. By using a combination of proteomics and transcriptional level analysis, we found that overexpression of the Hol380 raised the accumulation of Ffh and YidC involved in the signal recognition particle pathway in L. lactis, suggesting an alternative road participating in protein secretion. This study proposed a new approach by expressing holin in bacterial cell factories to export target proteins of economic or medical interest. This article is protected by copyright. All rights reserved.

Cotranslational Biogenesis of Membrane Proteins in Bacteria

Nascent polypeptides emerging from the ribosome during translation are rapidly scanned and processed by ribosome-associated protein biogenesis factors (RPBs). RPBs cleave the N-terminal formyl and methionine groups, assist cotranslational protein folding, and sort the proteins according to their cellular destination. Ribosomes translating inner-membrane proteins are recognized and targeted to the translocon with the help of the signal recognition particle, SRP, and SRP receptor, FtsY. The growing nascent peptide is then inserted into the phospholipid bilayer at the translocon, an inner-membrane protein complex consisting of SecY, SecE, and SecG. Folding of membrane proteins requires that transmembrane helices (TMs) attain their correct topology, the soluble domains are inserted at the correct (cytoplasmic or periplasmic) side of the membrane, and – for polytopic membrane proteins – the TMs find their interaction partner TMs in the phospholipid bilayer. This review describes the recent progress in understanding how growing nascent peptides are processed and how inner-membrane proteins are targeted to the translocon and find their correct orientation at the membrane, with the focus on biophysical approaches revealing the dynamics of the process. We describe how spontaneous fluctuations of the translocon allow diffusion of TMs into the phospholipid bilayer and argue that the ribosome orchestrates cotranslational targeting not only by providing the binding platform for the RPBs or the translocon, but also by helping the nascent chains to find their correct orientation in the membrane. Finally, we present the auxiliary role of YidC as a chaperone for inner-membrane proteins. We show how biophysical approaches provide new insights into the dynamics of membrane protein biogenesis and raise new questions as to how translation modulates protein folding.

The mechanisms of integral membrane protein biogenesis

Roughly one quarter of all genes code for integral membrane proteins that are inserted into the plasma membrane of prokaryotes or the endoplasmic reticulum membrane of eukaryotes. Multiple pathways are used for the targeting and insertion of membrane proteins on the basis of their topological and biophysical characteristics. Multipass membrane proteins span the membrane multiple times and face the additional challenges of intramembrane folding. In many cases, integral membrane proteins require assembly with other proteins to form multi-subunit membrane protein complexes. Recent biochemical and structural analyses have provided considerable clarity regarding the molecular basis of membrane protein targeting and insertion, with tantalizing new insights into the poorly understood processes of multipass membrane protein biogenesis and multi-subunit protein complex assembly.

Pushing the Envelope: The Mysterious Journey Through the Bacterial Secretory Machinery, and Beyond

Gram-negative bacteria are contained by an envelope composed of inner and outer-membranes with the peptidoglycan (PG) layer between them. Protein translocation across the inner membrane for secretion, or insertion into the inner membrane is primarily conducted using the highly conserved, hourglass-shaped channel, SecYEG: the core-complex of the Sec translocon. This transport process is facilitated by interactions with ancillary subcomplex SecDF-YajC (secretion) and YidC (insertion) forming the holo-translocon (HTL). This review recaps the transport process across the inner-membrane and then further explores how delivery and folding into the periplasm or outer-membrane is achieved. It seems very unlikely that proteins are jettisoned into the periplasm and left to their own devices. Indeed, chaperones such as SurA, Skp, DegP are known to play a part in protein folding, quality control and, if necessary degradation. YfgM and PpiD, by their association at the periplasmic surface of the Sec machinery, most probably are also involved in some way. Yet, it is not entirely clear how outer-membrane proteins are smuggled past the proteases and across the PG to the barrel-assembly machinery (BAM) and their final destination. Moreover, how can this be achieved, as is thought, without the input of energy? Recently, we proposed that the Sec and BAM translocons interact with one another, and most likely other factors, to provide a conduit to the periplasm and the outer-membrane. As it happens, numerous other specialized proteins secretion systems also form trans-envelope structures for this very purpose. The direct interaction between components across the envelope raises the prospect of energy coupling from the inner membrane for active transport to the outer-membrane. Indeed, this kind of long-range energy coupling through large inter-membrane assemblies occurs for small molecule import (e.g., nutrient import by the Ton complex) and export (e.g., drug efflux by the AcrAB-TolC complex). This review will consider this hypothetical prospect in the context of outer-membrane protein biogenesis.

Ribosome-membrane crosstalk: Co-translational targeting pathways of proteins across membranes in prokaryotes and eukaryotes

Ribosomes are the molecular machine of living cells designed for decoding mRNA-encoded genetic information into protein. Being sophisticated machinery, both in design and function, the ribosome not only carries out protein synthesis, but also coordinates several other ribosome-associated cellular processes. One such process is the translocation of proteins across or into the membrane depending on their secretory or membrane-associated nature. These proteins comprise a large portion of a cell's proteome and act as key factors for cellular survival as well as several crucial functional pathways. Protein transport to extra- and intra-cytosolic compartments (across the eukaryotic endoplasmic reticulum (ER) or across the prokaryotic plasma membrane) or insertion into membranes majorly occurs through an evolutionarily conserved protein-conducting channel called translocon (eukaryotic Sec61 or prokaryotic SecYEG channels). Targeting proteins to the membrane-bound translocon may occur via post-translational or co-translational modes and it is often mediated by recognition of an N-terminal signal sequence in the newly synthesizes polypeptide chain. Co-translational translocation is coupled to protein synthesis where the ribosome-nascent chain complex (RNC) itself is targeted to the translocon. Here, in the light of recent advances in structural and functional studies, we discuss our current understanding of the mechanistic models of co-translational translocation, coordinated by the actively translating ribosomes, in prokaryotes and eukaryotes.

Compensating Complete Loss of Signal Recognition Particle During Co-translational Protein Targeting by the Translation Speed and Accuracy

Signal recognition particle (SRP) is critical for delivering co-translational proteins to the bacterial inner membrane. Previously, we identified SRP suppressors in Escherichia coli that inhibit translation initiation and elongation, which provided insights into the mechanism of bypassing the requirement of SRP. Suppressor mutations tended to be located in regions that govern protein translation under evolutionary pressure. To test this hypothesis, we re-executed the suppressor screening of SRP. Here, we isolated a novel SRP suppressor mutation located in the Shine–Dalgarno sequence of the S10 operon, which partially offset the targeting defects of SRP-dependent proteins. We found that the suppressor mutation decreased the protein translation rate, which extended the time window of protein targeting. This increased the possibility of the correct localization of inner membrane proteins. Furthermore, the fidelity of translation was decreased in suppressor cells, suggesting that the quality control of translation was inactivated to provide an advantage in tolerating toxicity caused by the loss of SRP. Our results demonstrated that the inefficient protein targeting due to SRP deletion can be rescued through modulating translational speed and accuracy.

Human SND2 mediates ER targeting of GPI-anchored proteins with low hydrophobic GPI attachment signals

Over 100 glycosylphosphatidylinositol-anchored proteins (GPI-APs) are encoded in the mammalian genome. It is not well understood how these proteins are targeted and translocated to the endoplasmic reticulum (ER). Here, we reveal that many GPI-APs, such as CD59, CD55, and CD109, utilize human SND2 (hSND2)-dependent ER targeting machinery. We also found that signal recognition particle receptors seem to cooperate with hSND2 to target GPI-APs to the ER. Both the N-terminal signal sequence and C-terminal GPI attachment signal of GPI-APs contribute to ER targeting via the hSND2-dependent pathway. Particularly, the hydrophobicity of the C-terminal GPI attachment signal acts as the determinant of hSND2 dependency. Our results explain the route and mechanism of the ER targeting of GPI-APs in mammalian cells.

Production of Carminic Acid by Metabolically Engineered Escherichia coli

Carminic acid is an aromatic polyketide found in scale insects (i.e., Dactylopius coccus) and is a widely used natural red colorant. It has long been produced by the cumbersome farming of insects followed by multistep purification processes. Thus, there has been much interest in producing carminic acid by the fermentation of engineered bacteria. Here we report the complete biosynthesis of carminic acid from glucose in engineered Escherichia coli. We first optimized the type II polyketide synthase machinery from Photorhabdus luminescens, enabling a high-level production of flavokermesic acid upon coexpression of the cyclases ZhuI and ZhuJ from Streptomyces sp. R1128. To discover the enzymes responsible for the remaining two reactions (hydroxylation and C-glucosylation), biochemical reaction analyses were performed by testing enzyme candidates reported to perform similar reactions. The two identified enzymes, aklavinone 12-hydroxylase (DnrF) from Streptomyces peucetius and C-glucosyltransferase (GtCGT) from Gentiana triflora, could successfully perform hydroxylation and C-glucosylation of flavokermesic acid, respectively. Then, homology modeling and docking simulations were performed to enhance the activities of these two enzymes, leading to the generation of beneficial mutants with 2-5-fold enhanced conversion efficiencies. In addition, the GtCGT mutant was found to be a generally applicable C-glucosyltransferase in E. coli, as was showcased by the successful production of aloesin found in Aloe vera. Simple metabolic engineering followed by fed-batch fermentation resulted in 0.63 ± 0.02 mg/L of carminic acid production from glucose. The strategies described here will be useful for the design and construction of biosynthetic pathways involving unknown enzymes and consequently the production of diverse industrially important natural products.

How Quality Control Systems AID Sec-Dependent Protein Translocation

The evolutionarily conserved Sec machinery is responsible for transporting proteins across the cytoplasmic membrane. Protein substrates of the Sec machinery must be in an unfolded conformation in order to be translocated across (or inserted into) the cytoplasmic membrane. In bacteria, the requirement for unfolded proteins is strict: substrate proteins that fold (or misfold) prematurely in the cytoplasm prior to translocation become irreversibly trapped in the cytoplasm. Partially folded Sec substrate proteins and stalled ribosomes containing nascent Sec substrates can also inhibit translocation by blocking (i.e., “jamming”) the membrane-embedded Sec machinery. To avoid these issues, bacteria have evolved a complex network of quality control systems to ensure that Sec substrate proteins do not fold in the cytoplasm. This quality control network can be broken into three branches, for which we have defined the acronym “AID”: (i) avoidance of cytoplasmic intermediates through cotranslationally channeling newly synthesized Sec substrates to the Sec machinery; (ii) inhibition of folding Sec substrate proteins that transiently reside in the cytoplasm by molecular chaperones and the requirement for posttranslational modifications; (iii) destruction of products that could potentially inhibit translocation. In addition, several stress response pathways help to restore protein-folding homeostasis when environmental conditions that inhibit translocation overcome the AID quality control systems.

Signal Recognition Particle Suppressor Screening Reveals the Regulation of Membrane Protein Targeting by the Translation Rate

The signal recognition particle (SRP) is conserved in all living organisms, and it cotranslationally delivers proteins to the inner membrane or endoplasmic reticulum. Recently, SRP loss was found not to be lethal in either the eukaryote Saccharomyces cerevisiae or the prokaryote Streptococcus mutans In Escherichia coli, the role of SRP in mediating inner membrane protein (IMP) targeting has long been studied. However, the essentiality of SRP remains a controversial topic, partly hindered by the lack of strains in which SRP is completely absent. Here we show that the SRP was nonessential in E. coli by suppressor screening. We identified two classes of extragenic suppressors-two translation initiation factors and a ribosomal protein-all of which are involved in translation initiation. The translation rate and inner membrane proteomic analyses were combined to define the mechanism that compensates for the lack of SRP. The primary factor that contributes to the efficiency of IMP targeting is the extension of the time window for targeting by pausing the initiation of translation, which further reduces translation initiation and elongation rates. Furthermore, we found that easily predictable features in the nascent chain determine the specificity of protein targeting. Our results show why the loss of the SRP pathway does not lead to lethality. We report a new paradigm in which the time delay in translation initiation is beneficial during protein targeting in the absence of SRP.IMPORTANCE Inner membrane proteins (IMPs) are cotranslationally inserted into the inner membrane or endoplasmic reticulum by the signal recognition particle (SRP). Generally, the deletion of SRP can result in protein targeting defects in Escherichia coli Suppressor screening for loss of SRP reveals that pausing at the translation start site is likely to be critical in allowing IMP targeting and avoiding aggregation. In this work, we found for the first time that SRP is nonessential in E. coli The time delay in initiation is different from the previous mechanism that only slows down the elongation rate. It not only maximizes the opportunity for untranslated ribosomes to be near the inner membrane but also extends the time window for targeting translating ribosomes by decreasing the speed of translation. We anticipate that our work will be a starting point for a more delicate regulatory mechanism of protein targeting.

Two Signal Recognition Particle Sequences Are Present in the Amino-Terminal Domain of the C-Tailed Protein SciP

During their synthesis, the C-tailed membrane proteins expose the membrane-spanning segment late from the ribosome and consequently can insert into the membrane only posttranslationally. However, the C-tailed type 6 secretion system (T6SS) component SciP uses the bacterial signal recognition particle (SRP) system for membrane targeting, which operates cotranslationally. Analysis of possible sequence regions in the amino-terminal part of the protein revealed two candidates that were then tested for whether they function as SRP signal peptides. Both sequences were tested positive as synthetic peptides for binding to SRP. In addition, purified ribosomes with stalled nascent chains exposing either sequence were capable of binding to SRP and SRP-FtsY complexes with high affinity. Together, the data suggest that both peptides can serve as an SRP signal sequence promoting an early membrane targeting of SciP during its synthesis. Like observed for multispanning membrane proteins, the two cytoplasmic SRP signal sequences of SciP may also facilitate a retargeting event, making the targeting more efficient.IMPORTANCE C-tail proteins are anchored in the inner membrane with a transmembrane segment at the C terminus in an N-in/C-out topology. Due to this topology, membrane insertion occurs only posttranslationally. Nevertheless, the C-tail-anchored protein SciP is targeted cotranslationally by SRP. We report here that two amino-terminal hydrophobic stretches in SciP are individually recognized by SRP and target the nascent protein to FtsY. The presence of two signal sequences may enable a retargeting mechanism, as already observed for multispanning membrane proteins, to make the posttranslational insertion of SciP by YidC more efficient.

Characterization of Novel Lactobacillus fermentum from Curd Samples of Indigenous Cows from Malnad Region, Karnataka, for their Aflatoxin B1 Binding and Probiotic Properties

Thirty-four isolates of Lactobacillus spp. (LAB) from 34 curd samples were evaluated for their aflatoxin B₁ (AFB₁) binding and probiotic properties. Upon characterization, four LAB isolates (LC3/a, LC4/c, LC/5a, and LM13/b) were found to be effective in removing AFB₁ from culture media with a capacity of above 75%. Staining reaction, biochemical tests, pattern of sugar utilization, and 16s rRNA gene sequence analysis revealed the identity of all the four isolates as L. fermentum. All of them could tolerate acidic pH, salt, and bile, which promise the use of these probiotic bacterial isolates for human applications. These isolates showed poor hydrophobicity and higher auto-aggregation properties. All L. fermentum isolates were found susceptible to gentamycin, chloramphenicol, cefoperazone, ampicillin, and resistant to ciprofloxacin and vancomycin. Results of hemolytic and DNase activity indicated their nonpathogenic nature. Though all L. fermentum isolates found inhibiting the growth of Salmonella ebony, Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa, maximum inhibition was obtained with isolate LC5/a. Kinetic studies revealed that all four bacteria required a minimum of 2 h to reach stationary phase of AFB₁ binding. AFB₁ binding ability varied from 66 to 85.2% among these four isolates. Bile (0.4%) was significant (P ≤ 0.05) in reducing the AFB₁ binding property of isolates LC3/a, LC4/c, and LM13/b, while increased AFB₁ binding ability was recorded at acidic pH (2.0). AFB₁ binding properties of isolate LC5/a were found least affected by acidic pH and bile. The findings of our study revealed the higher efficiency of L. fermentum isolate LC5/a in reducing the bioavailability of AFB1 in gut, and additionally, it improves the consumers' health by its various probiotic characters. These beneficial characters, L. fermentum isolates, promise them to use as probiotic formulations alone or in combinations with other beneficial probiotic-bacterial isolates.

Distinct Requirements for Tail-Anchored Membrane Protein Biogenesis in Escherichia coli

A subset of membrane proteins is targeted to and inserted into the membrane via a hydrophobic transmembrane domain (TMD) that is positioned at the very C terminus of the protein. The biogenesis of these so-called tail-anchored proteins (TAMPs) has been studied in detail in eukaryotic cells. Various partly redundant pathways were identified, the choice for which depends in part on the hydrophobicity of the TMD. Much less is known about bacterial TAMPs. The significance of our research is in identifying the role of TMD hydrophobicity in the routing of E. coli TAMPs. Our data suggest that both the nature of the TMD and its role in routing can be very different for TAMPs versus “regular” membrane proteins. Elucidating these position-specific effects of TMDs will increase our understanding of how prokaryotic cells face the challenge of producing a wide variety of membrane proteins.

Tail-anchored membrane proteins (TAMPs) are a distinct subset of inner membrane proteins (IMPs) characterized by a single C-terminal transmembrane domain (TMD) that is responsible for both targeting and anchoring. Little is known about the routing of TAMPs in bacteria. Here, we have investigated the role of TMD hydrophobicity in tail-anchor function in Escherichia coli and its influence on the choice of targeting/insertion pathway. We created a set of synthetic, fluorescent TAMPs that vary in the hydrophobicity of their TMDs and corresponding control polypeptides that are extended at their C terminus to create regular type II IMPs. Surprisingly, we observed that TAMPs have a much lower TMD hydrophobicity threshold for efficient targeting and membrane insertion than their type II counterparts. Using strains conditional for the expression of known membrane-targeting and insertion factors, we show that TAMPs with strongly hydrophobic TMDs require the signal recognition particle (SRP) for targeting. Neither the SecYEG translocon nor YidC appears to be essential for the membrane insertion of any of the TAMPs studied. In contrast, corresponding type II IMPs with a TMD of sufficient hydrophobicity to promote membrane insertion followed an SRP- and SecYEG translocon-dependent pathway. Together, these data indicate that the capacity of a TMD to promote the biogenesis of E. coli IMPs is strongly dependent upon the polypeptide context in which it is presented.

Co-translational protein targeting in bacteria

About 30% of all bacterial proteins execute their function outside of the cytosol and have to be transported into or across the cytoplasmic membrane. Bacteria use multiple protein transport systems in parallel, but the majority of proteins engage two distinct targeting systems. One is the co-translational targeting by two universally conserved GTPases, the signal recognition particle (SRP) and its receptor FtsY, which deliver inner membrane proteins to either the SecYEG translocon or the YidC insertase for membrane insertion. The other targeting system depends on the ATPase SecA, which targets secretory proteins, i.e. periplasmic and outer membrane proteins, to SecYEG for their subsequent ATP-dependent translocation. While SRP selects its substrates already very early during their synthesis, the recognition of secretory proteins by SecA is believed to occur primarily after translation termination, i.e. post-translationally. In this review we highlight recent progress on how SRP recognizes its substrates at the ribosome and how the fidelity of the targeting reaction to SecYEG is maintained. We furthermore discuss similarities and differences in the SRP-dependent targeting to either SecYEG or YidC and summarize recent results that suggest that some membrane proteins are co-translationally targeted by SecA.

The way is the goal: how SecA transports proteins across the cytoplasmic membrane in bacteria

In bacteria, translocation of most soluble secreted proteins (and outer membrane proteins in Gram-negative bacteria) across the cytoplasmic membrane by the Sec machinery is mediated by the essential ATPase SecA. At its core, this machinery consists of SecA and the integral membrane proteins SecYEG, which form a protein conducting channel in the membrane. Proteins are recognised by the Sec machinery by virtue of an internally encoded targeting signal, which usually takes the form of an N-terminal signal sequence. In addition, substrate proteins must be maintained in an unfolded conformation in the cytoplasm, prior to translocation, in order to be competent for translocation through SecYEG. Recognition of substrate proteins occurs via SecA—either through direct recognition by SecA or through secondary recognition by a molecular chaperone that delivers proteins to SecA. Substrate proteins are then screened for the presence of a functional signal sequence by SecYEG. Proteins with functional signal sequences are translocated across the membrane in an ATP-dependent fashion. The current research investigating each of these steps is reviewed here.

The SRP signal sequence of KdpD

KdpD is a four-spanning membrane protein that has two large cytoplasmic domains at the amino- and at the carboxyterminus, respectively. During its biogenesis KdpD binds to the signal recognition particle (SRP) of Escherichia coli that consists of a 48-kDa protein Ffh and a 4.5S RNA. The protein is targeted to the inner membrane surface and is released after contacting the SRP receptor protein FtsY. The information within the KdpD protein that confers SRP interaction was found in the amino-terminal cytoplasmic domain of KdpD, particularly at residues 22–48. Within this sequence a Walker A motif is present at residues 30–38. To determine the actual sequence specificity to SRP, a collection of mutants was constructed. When the KdpD peptides (residues 22–48) were fused to sfGFP the targeting to the membrane was observed by fluorescence microscopy. Further, nascent chains of KdpD bound to ribosomes were purified and their binding to SRP was analysed by microscale thermophoresis. We found that the amino acid residues R22, K24 and K26 are important for SRP interaction, whereas the residues G30, G34 and G36, essential for a functional Walker A motif, can be replaced with alanines without affecting the affinity to SRP-FtsY and membrane targeting.

Posttranslational Targeting of a Recombinant Protein Promotes Its Efficient Secretion into the Escherichia coli Periplasm

Many recombinant proteins that are produced in Escherichia coli have to be targeted to the periplasm to be functional. N-terminal signal peptides can be used to direct recombinant proteins to the membrane-embedded Sec translocon, a multiprotein complex that translocates proteins across the membrane into the periplasm. We have recently shown that the cotranslational targeting of the single-chain variable antibody fragment BL1 saturates the capacity of the Sec translocon leading to impaired translocation of secretory proteins and protein misfolding/aggregation in the cytoplasm. In turn, protein production yields and biomass formation were low. Here, we study the consequences of targeting BL1 posttranslationally to the Sec translocon. Notably, the posttranslational targeting of BL1 does not saturate the Sec translocon capacity, and both biomass formation and protein production yields are increased. Analyzing the proteome of cells producing the posttranslationally targeted BL1 indicates that the decreased synthesis of endogenous secretory and membrane proteins prevents a saturation of the Sec translocon capacity. Furthermore, in these cells, highly abundant chaperones and proteases can clear misfolded/aggregated proteins from the cytoplasm, thereby improving the fitness of these cells. Thus, the posttranslational targeting of BL1 enables its efficient production in the periplasm due to a favorable adaptation of the E. coli proteome. We envisage that our observations can be used to engineer E. coli for the improved production of recombinant secretory proteins.IMPORTANCE The bacterium Escherichia coli is widely used to produce recombinant proteins. To fold properly, many recombinant proteins have to be targeted to the E. coli periplasm, but so far the impact of the targeting pathway of a recombinant protein to the periplasm has not been extensively investigated. Here, we show that the targeting pathway of a recombinant antibody fragment has a tremendous impact on cell physiology, ultimately affecting protein production yields in the periplasm and biomass formation. This indicates that studying the targeting and secretion of proteins into the periplasm could be used to design strategies to improve recombinant protein production yields.

Mutagenesis of DsbAss is Crucial for the Signal Recognition Particle Mechanism in Escherichia coli: Insights from Molecular Dynamics Simulations

The disulfide bond signal sequence (DsbAss) protein is characterized as an important virulence factor in gram-negative bacteria. This study aimed to analyze the "alanine" alteration in the hydrophobic (H) region of DsbAss and to understand the conformational DsbAss alteration(s) inside the fifty-four homolog (Ffh)-binding groove which were revealed to be crucial for translocation of ovine growth hormone (OGH) to the periplasmic space in Escherichia coli via the secretory (Sec) pathway. An experimental design was used to explore the hydrophobicity and alteration of alanine (Ala) to isoleucine (Ile) in the tripartite structure of DsbAss. As a result, two DsbAss mutants (Ala at positions -11 and -13) with same hydrophobicity of 1.539 led to the conflicting translocation of the active OGH gene. We performed molecular dynamics (MD) simulations and molecular mechanics generalized born surface area (MM-GBSA) binding free energy calculations to examine the interaction energetic and dynamic aspects of DsbAss/signal repetition particle 54 (SRP54) binding, which has a principle role in Escherichia coli Sec pathways. Although both DsbAss mutants retained helicity, the MD simulation analysis evidenced that altering Ala-13 changed the orientation of the signal peptide in the Ffh M binding domain groove, favored more stable interaction energies (MM-GBSA ΔG_total = -140.62 kcal mol^-1), and hampered the process of OGH translocation, while Ala-11 pointed outward due to unstable conformation and less binding energy (ΔG_total = -124.24 kcal mol^-1). Here we report the dynamic behavior of change of "alanine" in the H-domain of DsbAss which affects the process of translocation of OGH, where MD simulation and MM-GBSA can be useful initial tools to investigate the virulence of bacteria.

Role of the signal sequence in proteorhodopsin biogenesis in E. coli

Blue-absorbing proteorhodopsin (BPR) from marine bacteria is a retinal-bound, light-activated, outwards proton transporter containing seven α-helical transmembrane segments (TMS). It is synthesized as a precursor species (pre-BPR) with a predicted N-terminal signal sequence that is cleaved to yield the mature protein. While optimizing the production of BPR in Escherichia coli to facilitate the construction of bioprotonic devices, we observed significant pre-BPR accumulation in the inner membrane and explored signal sequence requirements and export pathway. We report here that BPR does not rely on the Sec pathway for inner membrane integration, and that although it greatly enhances yields, its signal sequence is not necessary to obtain a functional product. We further show that an unprocessable version of pre-BPR obtained by mutagenesis of the signal peptidase I site exhibits all functional attributes of the wild-type protein and has the advantage of being produced at higher levels. Our results are consistent with the BPR signal sequence being recognized by the signal recognition particle (SRP; a protein that orchestrates the cotranslational biogenesis of inner membrane proteins) and serving as a beneficial "pro" domain rather than a traditional secretory peptide.

Archaeal cell surface biogenesis

Cell surfaces are critical for diverse functions across all domains of life, from cell-cell communication and nutrient uptake to cell stability and surface attachment. While certain aspects of the mechanisms supporting the biosynthesis of the archaeal cell surface are unique, likely due to important differences in cell surface compositions between domains, others are shared with bacteria or eukaryotes or both. Based on recent studies completed on a phylogenetically diverse array of archaea, from a wide variety of habitats, here we discuss advances in the characterization of mechanisms underpinning archaeal cell surface biogenesis. These include those facilitating co- and post-translational protein targeting to the cell surface, transport into and across the archaeal lipid membrane, and protein anchoring strategies. We also discuss, in some detail, the assembly of specific cell surface structures, such as the archaeal S-layer and the type IV pili. We will highlight the importance of post-translational protein modifications, such as lipid attachment and glycosylation, in the biosynthesis as well as the regulation of the functions of these cell surface structures and present the differences and similarities in the biogenesis of type IV pili across prokaryotic domains.

Substrate Proteins Take Shape at an Improved Bacterial Translocon

Characterization of Sec-dependent bacterial protein transport has often relied on an in vitro protein translocation system comprised in part of Escherichia coli inverted inner membrane vesicles or, more recently, purified SecYEG translocons reconstituted into liposomes using mostly a single substrate (proOmpA). A paper published in this issue (P. Bariya and L. Randall, J Bacteriol 201:e00493-18, 2019, https://doi.org/10.1128/JB.00493-18) finds that inclusion of SecA protein during SecYEG proteoliposome reconstitution dramatically improves the number of active translocons. This experimentally useful and intriguing result that may arise from SecA membrane integration properties is discussed here. Furthermore, determination of the rate-limiting transport step for nine different substrates implicates the mature region distal to the signal peptide in the observed rate constant differences, indicating that more nuanced transport models that respond to differences in protein sequence and structure are needed.

Optimizing Recombinant Protein Production in the Escherichia coli Periplasm Alleviates Stress

In Escherichia coli, many recombinant proteins are produced in the periplasm. To direct these proteins to this compartment, they are equipped with an N-terminal signal sequence so that they can traverse the cytoplasmic membrane via the protein-conducting Sec translocon. Recently, using the single-chain variable antibody fragment BL1, we have shown that harmonizing the target gene expression intensity with the Sec translocon capacity can be used to improve the production yields of a recombinant protein in the periplasm. Here, we have studied the consequences of improving the production of BL1 in the periplasm by using a proteomics approach. When the target gene expression intensity is not harmonized with the Sec translocon capacity, the impaired translocation of secretory proteins, protein misfolding/aggregation in the cytoplasm, and an inefficient energy metabolism result in poor growth and low protein production yields. The harmonization of the target gene expression intensity with the Sec translocon capacity results in normal growth, enhanced protein production yields, and, surprisingly, a composition of the proteome that is-besides the produced target-the same as that of cells with an empty expression vector. Thus, the single-chain variable antibody fragment BL1 can be efficiently produced in the periplasm without causing any notable detrimental effects to the production host. Finally, we show that under the optimized conditions, a small fraction of the target protein is released into the extracellular milieu via outer membrane vesicles. We envisage that our observations can be used to design strategies to further improve the production of secretory recombinant proteins in E. coliIMPORTANCE The bacterium Escherichia coli is widely used to produce recombinant proteins. Usually, trial-and-error-based screening approaches are used to identify conditions that lead to high recombinant protein production yields. Here, for the production of an antibody fragment in the periplasm of E. coli, we show that an optimization of its production is accompanied by the alleviation of stress. This indicates that the monitoring of stress responses could be used to facilitate enhanced recombinant protein production yields.

Secretion of recombinant proteins from E. coli

The microorganism Escherichia coli is commonly used for recombinant protein production. Despite several advantageous characteristics like fast growth and high protein yields, its inability to easily secrete recombinant proteins into the extracellular medium remains a drawback for industrial production processes. To overcome this limitation, a multitude of approaches to enhance the extracellular yield and the secretion efficiency of recombinant proteins have been developed in recent years. Here, a comprehensive overview of secretion mechanisms for recombinant proteins from E. coli is given and divided into three main sections. First, the structure of the E. coli cell envelope and the known natural secretion systems are described. Second, the use and optimization of different one- or two-step secretion systems for recombinant protein production, as well as further permeabilization methods are discussed. Finally, the often-overlooked role of cell lysis in secretion studies and its analysis are addressed. So far, effective approaches for increasing the extracellular protein concentration to more than 10 g/L and almost 100% secretion efficiency exist, however, the large range of optimization methods and their combinations suggests that the potential for secretory protein production from E. coli has not yet been fully realized.

Highly stable single-strand-specific 3'-nuclease/nucleotidase from Legionella pneumophila

The Gram-negative bacterium Legionella pneumophila is one of the known opportunistic human pathogens with a gene coding for a zinc-dependent S1-P1 type nuclease. Bacterial zinc-dependent 3'-nucleases/nucleotidases are little characterized and not fully understood, including L. pneumophila nuclease 1 (Lpn1), in contrast to many eukaryotic representatives with in-depth studies available. To help explain the principle properties and role of these enzymes in intracellular prokaryotic pathogens we have designed and optimized a heterologous expression protocol utilizing E. coli together with an efficient purification procedure, and performed detailed characterization of the enzyme. Replacement of Ni²⁺ ions by Zn²⁺ ions in affinity purification proved to be a crucial step in the production of pure and stable protein. The production protocol provides protein with high yield, purity, stability, and solubility for structure-function studies. We show that highly thermostable Lpn1 is active mainly towards RNA and ssDNA, with pH optima 7.0 and 6.0, respectively, with low activity towards dsDNA; the enzyme features pronounced substrate inhibition. Bioinformatic and experimental analysis, together with computer modeling and electrostatics calculations point to an unusually high positive charge on the enzyme surface under optimal conditions for catalysis. The results help explain the catalytic properties of Lpn1 and its substrate inhibition.

SRP, FtsY, DnaK and YidC Are Required for the Biogenesis of the E. coli Tail-Anchored Membrane Proteins DjlC and Flk

Tail-anchored membrane proteins (TAMPs) are relatively simple membrane proteins characterized by a single transmembrane domain (TMD) at their C-terminus. Consequently, the hydrophobic TMD, which acts as a subcellular targeting signal, emerges from the ribosome only after termination of translation precluding canonical co-translational targeting and membrane insertion. In contrast to the well-studied eukaryotic TAMPs, surprisingly little is known about the cellular components that facilitate the biogenesis of bacterial TAMPs. In this study, we identify DjlC and Flk as bona fide Escherichia coli TAMPs and show that their TMDs are necessary and sufficient for authentic membrane targeting of the fluorescent reporter mNeonGreen. Using strains conditional for the expression of known E. coli membrane targeting and insertion factors, we demonstrate that the signal recognition particle (SRP), its receptor FtsY, the chaperone DnaK and insertase YidC are each required for efficient membrane localization of both TAMPs. A close association between the TMD of DjlC and Flk with both the Ffh subunit of SRP and YidC was confirmed by site-directed in vivo photo-crosslinking. In addition, our data suggest that the hydrophobicity of the TMD correlates with the dependency on SRP for efficient targeting.

The SecA protein deeply penetrates into the SecYEG channel during insertion, contacting most channel transmembrane helices and periplasmic regions

The bacterial Sec-dependent system is the major protein-biogenic pathway for protein secretion across the cytoplasmic membrane or insertion of integral membrane proteins into the phospholipid bilayer. The mechanism of SecA-driven protein transport across the SecYEG channel complex has remained controversial with conflicting claims from biochemical and structural studies regarding the depth and extent of SecA insertion into SecYEG during ongoing protein transport. Here we utilized site-specific in vivo photo-crosslinking to thoroughly map SecY regions that are in contact with SecA during its insertion cycle. An arabinose-inducible, rapidly folding OmpA-GFP chimera was utilized to jam the SecYEG channels with an arrested substrate protein to "freeze" them in their SecA-inserted state. Examination of 117 sites distributed throughout SecY indicated that SecA not only interacts extensively with the cytosolic regions of SecY as shown previously, but it also interacts with most of the transmembrane helices and periplasmic regions of SecY, with a clustering of interaction sights around the lateral gate and pore ring regions. Our observations support previous reports of SecA membrane insertion during in vitro protein transport as well as those documenting the membrane penetration properties of this protein. They suggest that one or more SecA regions transiently integrate into the heart of the SecY channel complex to span the membrane to promote the protein transport cycle. These findings indicate that high-resolution structural information about the membrane-inserted state of SecA is still lacking and will be critical for elucidating the bacterial protein transport mechanism.

Alignment of the protein substrate hairpin along the SecA two-helix finger primes protein transport in Escherichia coli

A conserved hairpin-like structure comprised of a signal peptide and early mature region initiates protein transport across the SecY or Sec61α channel in Bacteria or Archaea and Eukarya, respectively. When and how this initiator substrate hairpin forms remains a mystery. Here, we have used the bacterial SecA ATPase motor protein and SecYEG channel complex to address this question. Engineering of a functional miniprotein substrate onto the end of SecA allowed us to efficiently form ternary complexes with SecYEG for spectroscopic studies. Förster resonance energy transfer mapping of key residues within this ternary complex demonstrates that the protein substrate adopts a hairpin-like structure immediately adjacent to the SecA two-helix finger subdomain before channel entry. Comparison of ADP and ATP-γS-bound states shows that the signal peptide partially inserts into the SecY channel in the latter state. Our study defines a unique preinsertion intermediate state where the SecA two-helix finger appears to play a role in both templating the substrate hairpin at the channel entrance and promoting its subsequent ATP-dependent insertion.

Structure and topology around the cleavage site regulate post-translational cleavage of the HIV-1 gp160 signal peptide

Like all other secretory proteins, the HIV-1 envelope glycoprotein gp160 is targeted to the endoplasmic reticulum (ER) by its signal peptide during synthesis. Proper gp160 folding in the ER requires core glycosylation, disulfide-bond formation and proline isomerization. Signal-peptide cleavage occurs only late after gp160 chain termination and is dependent on folding of the soluble subunit gp120 to a near-native conformation. We here detail the mechanism by which co-translational signal-peptide cleavage is prevented. Conserved residues from the signal peptide and residues downstream of the canonical cleavage site form an extended alpha-helix in the ER membrane, which covers the cleavage site, thus preventing cleavage. A point mutation in the signal peptide breaks the alpha helix allowing co-translational cleavage. We demonstrate that postponed cleavage of gp160 enhances functional folding of the molecule. The change to early cleavage results in decreased viral fitness compared to wild-type HIV.

Protein translocation: what's the problem?

We came together in Leeds to commemorate and celebrate the life and achievements of Prof. Stephen Baldwin. For many years we, together with Sheena Radford and Roman Tuma (colleagues also of the University of Leeds), have worked together on the problem of protein translocation through the essential and ubiquitous Sec system. Inspired and helped by Steve we may finally be making progress. My seminar described our latest hypothesis for the molecular mechanism of protein translocation, supported by results collected in Bristol and Leeds on the tractable bacterial secretion process–commonly known as the Sec system; work that will be published elsewhere. Below is a description of the alternative and contested models for protein translocation that we all have been contemplating for many years. This review will consider their pros and cons.

Targeting and Insertion of Membrane Proteins

The insertion and assembly of proteins into the inner membrane of bacteria are crucial for many cellular processes, including cellular respiration, signal transduction, and ion and pH homeostasis. This process requires efficient membrane targeting and insertion of proteins into the lipid bilayer in their correct orientation and proper conformation. Playing center stage in these events are the targeting components, signal recognition particle (SRP) and the SRP receptor FtsY, as well as the insertion components, the Sec translocon and the YidC insertase. Here, we will discuss new insights provided from the recent high-resolution structures of these proteins. In addition, we will review the mechanism by which a variety of proteins with different topologies are inserted into the inner membrane of Gram-negative bacteria. Finally, we report on the energetics of this process and provide information on how membrane insertion occurs in Gram-positive bacteria and Archaea. It should be noted that most of what we know about membrane protein assembly in bacteria is based on studies conducted in Escherichia coli.

A New Suite of Plasmid Vectors for Fluorescence-Based Imaging of Root Colonizing Pseudomonads

In the terrestrial ecosystem, plant-microbe symbiotic associations are ecologically and economically important processes. To better understand these associations at structural and functional levels, different molecular and biochemical tools are applied. In this study, we have constructed a suite of vectors that incorporates several new elements into the rhizosphere stable, broad-host vector pME6031. The new vectors are useful for studies requiring multi-color tagging and visualization of plant-associated, Gram-negative bacterial strains such as Pseudomonas plant growth promotion and biocontrol strains. A number of genetic elements, including constitutive promoters and signal peptides that target secretion to the periplasm, have been evaluated. Several next generation fluorescent proteins, namely mTurquoise2, mNeonGreen, mRuby2, DsRed-Express2 and E2-Crimson have been incorporated into the vectors for whole cell labeling or protein tagging. Secretion of mTurquoise2 and mNeonGreen into the periplasm of Pseudomonas fluorescens SBW25 has also been demonstrated, providing a vehicle for tagging proteins in the periplasmic compartment. A higher copy number version of select plasmids has been produced by introduction of a previously described repA mutation, affording an increase in protein expression levels. The utility of these plasmids for fluorescence-based imaging is demonstrated by root colonization of Solanum lycopersicum seedlings by P. fluorescens SBW25 in a hydroponic growth system. The plasmids are stably maintained during root colonization in the absence of selective pressure for more than 2 weeks.

Global profiling of SRP interaction with nascent polypeptides

Signal recognition particle (SRP) is a universally conserved protein-RNA complex that mediates co-translational protein translocation and membrane insertion by targeting translating ribosomes to membrane translocons. The existence of parallel co- and post-translational transport pathways, however, raises the question of the cellular substrate pool of SRP and the molecular basis of substrate selection. Here we determine the binding sites of bacterial SRP within the nascent proteome of Escherichia coli at amino acid resolution, by sequencing messenger RNA footprints of ribosome-nascent-chain complexes associated with SRP. SRP, on the basis of its strong preference for hydrophobic transmembrane domains (TMDs), constitutes a compartment-specific targeting factor for nascent inner membrane proteins (IMPs) that efficiently excludes signal-sequence-containing precursors of periplasmic and outer membrane proteins. SRP associates with hydrophobic TMDs enriched in consecutive stretches of hydrophobic and bulky aromatic amino acids immediately on their emergence from the ribosomal exit tunnel. By contrast with current models, N-terminal TMDs are frequently skipped and TMDs internal to the polypeptide sequence are selectively recognized. Furthermore, SRP binds several TMDs in many multi-spanning membrane proteins, suggesting cycles of SRP-mediated membrane targeting. SRP-mediated targeting is not accompanied by a transient slowdown of translation and is not influenced by the ribosome-associated chaperone trigger factor (TF), which has a distinct substrate pool and acts at different stages during translation. Overall, our proteome-wide data set of SRP-binding sites reveals the underlying principles of pathway decisions for nascent chains in bacteria, with SRP acting as the dominant triaging factor, sufficient to separate IMPs from substrates of the SecA-SecB post-translational translocation and TF-assisted cytosolic protein folding pathways.

Structural analysis of a signal peptide inside the ribosome tunnel by DNP MAS NMR

Proteins are synthesized in cells by ribosomes and, in parallel, prepared for folding or targeting. While ribosomal protein synthesis is progressing, the nascent chain exposes amino-terminal signal sequences or transmembrane domains that mediate interactions with specific interaction partners, such as the signal recognition particle (SRP), the SecA-adenosine triphosphatase, or the trigger factor. These binding events can set the course for folding in the cytoplasm and translocation across or insertion into membranes. A distinction of the respective pathways depends largely on the hydrophobicity of the recognition sequence. Hydrophobic transmembrane domains stabilize SRP binding, whereas less hydrophobic signal sequences, typical for periplasmic and outer membrane proteins, stimulate SecA binding and disfavor SRP interactions. In this context, the formation of helical structures of signal peptides within the ribosome was considered to be an important factor. We applied dynamic nuclear polarization magic-angle spinning nuclear magnetic resonance to investigate the conformational states of the disulfide oxidoreductase A (DsbA) signal peptide stalled within the exit tunnel of the ribosome. Our results suggest that the nascent chain comprising the DsbA signal sequence adopts an extended structure in the ribosome with only minor populations of helical structure.

Channel crossing: how are proteins shipped across the bacterial plasma membrane?

The structure of the first protein-conducting channel was determined more than a decade ago. Today, we are still puzzled by the outstanding problem of protein translocation—the dynamic mechanism underlying the consignment of proteins across and into membranes. This review is an attempt to summarize and understand the energy transducing capabilities of protein-translocating machines, with emphasis on bacterial systems: how polypeptides make headway against the lipid bilayer and how the process is coupled to the free energy associated with ATP hydrolysis and the transmembrane protein motive force. In order to explore how cargo is driven across the membrane, the known structures of the protein-translocation machines are set out against the background of the historic literature, and in the light of experiments conducted in their wake. The paper will focus on the bacterial general secretory (Sec) pathway (SecY-complex), and its eukaryotic counterpart (Sec61-complex), which ferry proteins across the membrane in an unfolded state, as well as the unrelated Tat system that assembles bespoke channels for the export of folded proteins.

A DsbA-Deficient Periplasm Enables Functional Display of a Protein with Redox-Sensitive Folding on M13 Phage

The requirements for target protein folding in M13 phage display are largely underappreciated. Here we chose Fbs1, a carbohydrate binding protein, as a model to address this issue. Importantly, folding of Fbs1 is impaired in an oxidative environment. Fbs1 can be displayed on M13 phage using the SRP or Sec pathway. However, the displayed Fbs1 protein is properly folded only when Fbs1 is translocated via the SRP pathway and displayed using Escherichia coli cells with a DsbA-negative periplasm. This study indicates M13 phage display may be improved using a system specifically designed according to the folding requirements of each target protein.

Enhancing full-length antibody production by signal peptide engineering

Background

Protein secretion to the periplasm of Escherichia coli offers an attractive route for producing heterologous proteins including antibodies. In this approach, a signal peptide is fused to the N-terminus of the heterologous protein. The signal peptide mediates translocation of the heterologous protein from the cytoplasm to the periplasm and is cleaved during the translocation process. It was previously shown that optimization of the translation initiation region (TIR) which overlaps with the nucleotide sequence of the signal sequence improves the production of heterologous proteins. Despite the progress, there is still room to improve yields using secretion as a means to produce protein complexes such as full-length monoclonal antibodies (mAbs).

Results

In this study we identified the inefficient secretion of heavy chain as the limitation for full-length mAb accumulation in the periplasm. To improve heavy chain secretion we investigated the effects of various signal peptides at controlled TIR strengths. The signal peptide of disulfide oxidoreductase (DsbA) mediated more efficient secretion of heavy chain than the other signal peptides tested. Mutagenesis studies demonstrated that at controlled translational levels, hydrophobicity of the hydrophobic core (H-region) of the signal peptide is a critical factor for heavy chain secretion and full-length mAb accumulation in the periplasm. Increasing the hydrophobicity of a signal peptide enhanced heavy chain secretion and periplasmic levels of assembled full-length mAbs, while decreasing the hydrophobicity had the opposite effect.

Conclusions

This study demonstrates that under similar translational strengths, the hydrophobicity of the signal peptide plays an important role in heavy chain secretion. Increasing the hydrophobicity of the H-region and controlling TIR strengths can serve as an approach to improve heavy chain secretion and full-length mAb production in E. coli.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-016-0445-3) contains supplementary material, which is available to authorized users.

Conserved SecA Signal Peptide-Binding Site Revealed by Engineered Protein Chimeras and Förster Resonance Energy Transfer

Signal peptides are critical for the initiation of protein transport in bacteria by virtue of their recognition by the SecA ATPase motor protein followed by their transfer to the lateral gate region of the SecYEG protein-conducting channel complex. In this study, we have constructed and validated the use of signal peptide-attached SecA chimeras for conducting structural and functional studies on the initial step of SecA signal peptide interaction. We utilized this system to map the location and orientation of the bound alkaline phosphatase and KRRLamB signal peptides to a peptide-binding groove adjacent to the two-helix finger subdomain of SecA. These results support the existence of a single conserved SecA signal peptide-binding site that positions the signal peptide parallel to the two-helix finger subdomain of SecA, and they are also consistent with the proposed role of this subdomain in the transfer of the bound signal peptide from SecA into the protein-conducting channel of SecYEG protein. In addition, our work highlights the utility of this system to conveniently engineer and study the interaction of SecA with any signal peptide of interest as well as its potential use for X-ray crystallographic studies given issues with exogenous signal peptide solubility.

Type V Secretion: the Autotransporter and Two-Partner Secretion Pathways

The autotransporter and two-partner secretion (TPS) pathways are used by E. coli and many other Gram-negative bacteria to delivervirulence factors into the extracellular milieu.Autotransporters arecomprised of an N-terminal extracellular ("passenger") domain and a C-terminal β barrel domain ("β domain") that anchors the protein to the outer membrane and facilitates passenger domain secretion. In the TPS pathway, a secreted polypeptide ("exoprotein") is coordinately expressed with an outer membrane protein that serves as a dedicated transporter. Bothpathways are often grouped together under the heading "type V secretion" because they have many features in common and are used for the secretion of structurally related polypeptides, but it is likely that theyhave distinct evolutionary origins. Although it was proposed many years ago that autotransporterpassenger domains are transported across the outer membrane through a channel formed by the covalently linked β domain, there is increasing evidence that additional factors are involved in the translocation reaction. Furthermore, details of the mechanism of protein secretion through the TPS pathway are only beginning to emerge. In this chapter I discussour current understanding ofboth early and late steps in the biogenesis of polypeptides secreted through type V pathways and current modelsofthe mechanism of secretion.