Insertion of group II intron retroelements after intrinsic transcriptional terminators

Hydrolytic endonucleolytic ribozyme (HYER) is programmable for sequence-specific DNA cleavage

Ribozymes are catalytic RNAs with diverse functions including self-splicing and polymerization. This work aims to discover natural ribozymes that behave as hydrolytic and sequence-specific DNA endonucleases, which could be repurposed as DNA manipulation tools. Focused on bacterial group II-C introns, we found that many systems without intron-encoded protein propagate multiple copies in their resident genomes. These introns, named HYdrolytic Endonucleolytic Ribozymes (HYERs), cleaved RNA, single-stranded DNA, bubbled double-stranded DNA (dsDNA), and plasmids in vitro. HYER1 generated dsDNA breaks in the mammalian genome. Cryo-electron microscopy analysis revealed a homodimer structure for HYER1, where each monomer contains a Mg2+-dependent hydrolysis pocket and captures DNA complementary to the target recognition site (TRS). Rational designs including TRS extension, recruiting sequence insertion, and heterodimerization yielded engineered HYERs showing improved specificity and flexibility for DNA manipulation.

A Novel Thermostable and Processive Reverse Transcriptase from a Group II Intron of Anoxybacillus flavithermus

Reverse transcriptases (RTs) are a family of enzymes that synthesize DNA using an RNA template and are involved in retrovirus propagation and telomere lengthening. In vitro, RTs are widely applied in various methods, including RNA-seq, RT-PCR, and RT-LAMP. Thermostable RTs from bacterial group II introns are promising tools for biotechnology due to their higher thermostability, fidelity, and processivity compared to commonly used M-MuLV RT and its mutants. However, the diversity of group II intron-encoded RTs is still understudied. In this work, we biochemically characterized a novel RT from a thermophilic bacterium, Anoxybacillus flavithermus, which was isolated from a hot spring in New Zealand and has an optimal growth temperature of around 60 °C. The cloned RT, named Afl RT, retained approximately 40% of the specific activity after a 45 min incubation at 50 °C. The optimal pH was 8.5, the optimal temperature was between 45 and 50 °C, and Mn2+ ions were found to be an optimal cofactor. The processivity analysis with MS2 phage gRNA (3569 b) demonstrated that Afl RT elongated fully up to 36% of the template molecules. In reverse transcription and RT-qLAMP, the enzyme allowed up to 10 copies of MS2 phage genomic RNA to be detected per reaction. Thus, Afl RT holds great potential for a variety of practical applications that require the use of thermostable and processive RTs.

Recognition of transcription terminators during retrotransposition: How to keep a group II intron quiet

Chung et al. recently presented the structure of a primitive group IIC intron with its DNA target, which reveals the structural requirements that this class of intron uses to recognize a transcription terminator stem loop at the DNA level for insertion during retrotransposition.

Distinct Expansion of Group II Introns During Evolution of Prokaryotes and Possible Factors Involved in Its Regulation

Group II introns (G2Is) are ribozymes that have retroelement characteristics in prokaryotes. Although G2Is are suggested to have been an important evolutionary factor in the prokaryote-to-eukaryote transition, comprehensive analyses of these introns among the tens of thousands of prokaryotic genomes currently available are still limited. Here, we developed a bioinformatic pipeline that systematically collects G2Is and applied it to prokaryotic genomes. We found that in bacteria, 25% (447 of 1,790) of the total representative genomes had an average of 5.3 G2Is, and in archaea, 9% (28 of 296) of the total representative genomes had an average of 3.0 G2Is. The greatest number of G2Is per genome was 101 in Arthrospira platensis (phylum Cyanobacteriota). A comprehensive sequence analysis of the intron-encoded protein (IEP) in each G2I sequence was conducted and resulted in the addition of three new IEP classes (U1-U3) to the previous classification. This analysis suggested that about 30% of all IEPs are non-canonical IEPs. The number of G2Is per genome was defined almost at the phylum level, and at least in the following two phyla, Firmicutes, and Cyanobacteriota, the type of IEP was largely associated as a factor in the G2I increase, i.e., there was an explosive increase in G2Is with bacterial C-type IEPs, mainly in the phylum Firmicutes, and in G2Is with CL-type IEPs, mainly in the phylum Cyanobacteriota. We also systematically analyzed the relationship between genomic signatures and the mechanism of these increases in G2Is. This is the first study to systematically characterize G2Is in the prokaryotic phylogenies.

A new RNA-DNA interaction required for integration of group II intron retrotransposons into DNA targets

Mobile group II introns are site-specific retrotransposable elements abundant in bacterial and organellar genomes. They are composed of a large and highly structured ribozyme and an intron-encoded reverse transcriptase that binds tightly to its intron to yield a ribonucleoprotein (RNP) particle. During the first stage of the mobility pathway, the intron RNA catalyses its own insertion directly into the DNA target site. Recognition of the proper target rests primarily on multiple base-pairing interactions between the intron RNA and the target DNA, while the protein makes contacts with only a few target positions by yet-unidentified mechanisms. Using a combination of comparative sequence analyses and in vivo mobility assays we demonstrate the existence of a new base-pairing interaction named EBS2a–IBS2a between the intron RNA and its DNA target site. This pairing adopts a Watson–Crick geometry and is essential for intron mobility, most probably by driving unwinding of the DNA duplex. Importantly, formation of EBS2a–IBS2a also requires the reverse transcriptase enzyme which stabilizes the pairing in a non-sequence-specific manner. In addition to bringing to light a new structural device that allows subgroup IIB1 and IIB2 introns to invade their targets with high efficiency and specificity our work has important implications for the biotechnological applications of group II introns in bacterial gene targeting.

Serratia marcescens SCH909 as reservoir and source of genetic elements related to wide dissemination of antimicrobial resistance mechanisms

Serratia marcescens SCH909 is a multidrug resistant strain isolated in 1988 harboring three class 1 integrons. We wondered if these integrons were retained over time and if there were other antimicrobial resistant determinants contributing to its multidrug resistant profile. Genomic analysis showed a fourth multidrug resistance integron, a Tn7 transposon with dfrA1-sat2-ybeA-ybfA-ybfB-ybgA gene cassettes in the variable region. Insertion sequences were involved in the genesis of novel composite transposons in the L4 subtype plasmid pSCH909, such as Tn6824 carrying an arsenic regulon and two head to head class 1 integrons surrounded by two complete IS1. Remarkably, a novel chromosomal genomic island, SmaR, was identified, closely related to Multiple Antimicrobial Resistance Regions (MARR), usually found in AbaR0-type and AbGRI2-0 from global clones of Acinetobacter baumannii, and in M-type plasmids circulating in Enterobacteriaceae. Maintenance studies showed that the three class 1 integrons were maintained over 1 month without antimicrobial pressure. Since S. marcescens is considered a relevant nosocomial pathogen that can have a wide range of niches - human, plant, animal, soil and inanimate surfaces, our findings support the ability of this species to capture, maintain and spread a broad variety of antimicrobial resistance elements.

Bacterial Group II Intron Genomic Neighborhoods Reflect Survival Strategies: Hiding and Hijacking

Group II (gII) introns are mobile retroelements that can spread to new DNA sites through retrotransposition, which can be influenced by a variety of host factors. To determine if these host factors bear any relationship to the genomic location of gII introns, we developed a bioinformatic pipeline wherein we focused on the genomic neighborhoods of bacterial gII introns within their native contexts and sought to determine global relationships between introns and their surrounding genes. We found that, although gII introns inhabit diverse regions, these neighborhoods are often functionally enriched for genes that could promote gII intron retention or proliferation. On one hand, we observe that gII introns are frequently found hiding in mobile elements or after transcription terminators. On the other hand, gII introns are enriched in locations in which they could hijack host functions for their movement, potentially timing expression of the intron with genes that produce favorable conditions for retrotransposition. Thus, we propose that gII intron distributions have been shaped by relationships with their surrounding genomic neighbors.

Transitions between the steps of forward and reverse splicing of group IIC introns

Group II introns are mobile genetic elements that perform both self-splicing and intron mobility reactions. These ribozymes are comprised of a catalytic RNA core that binds to an intron-encoded protein (IEP) to form a ribonucleoprotein (RNP) complex. Splicing proceeds through two competing reactions: hydrolysis or branching. Group IIC intron ribozymes have a minimal RNA architecture, and splice almost exclusively through hydrolysis in ribozyme reactions. Addition of the IEP allows the splicing reaction to form branched lariat RNPs capable of intron mobility. Here we examine ribozyme splicing, IEP-dependent splicing, and mobility reactions of a group IIC intron from the thermophilic bacterium Thermoanerobacter italicus (Ta.it.I1). We show that Ta.it.I1 is highly active for ribozyme activity, forming linear hydrolytic intron products. Addition of purified IEP switches activity to the canonical lariat forming splicing reaction. We demonstrate that the Ta.it.I1 group IIC intron coordinates the progression of the forward splicing reaction through a π-π' interaction between intron domains II and VI. We further show that branched splicing is supported in the absence of the IEP when the π-π' interaction is mutated. We also investigated the regulation of the two steps of reverse splicing during intron mobility into DNA substrates. Using a fluorescent mobility assay that simultaneously visualizes all steps of intron integration into DNA, we show that completion of reverse splicing is tightly coupled to cDNA synthesis regardless of mutation of the π-π' interaction.

Conserved Critical Evolutionary Gene Structures in Orthologs

Unravelling gene structure requires the identification and understanding of the constraints that are often associated with the evolutionary history and functional domains of genes. We speculated in this manuscript with the possibility of the existence in orthologs of an emergent highly conserved gene structure that might explain their coordinated evolution during speciation events and their parental function. Here, we will address the following issues: (1) is there any conserved hypothetical structure along ortholog gene sequences? (2) If any, are such conserved structures maintained and conserved during speciation events? The data presented show evidences supporting this hypothesis. We have found that, (1) most orthologs studied share highly conserved compositional structures not observed previously. (2) While the percent identity of nucleotide sequences of orthologs correlates with the percent identity of composon sequences, the number of emergent compositional structures conserved during speciation does not correlate with the percent identity. (3) A broad range of species conserves the emergent compositional stretches. We will also discuss the concept of critical gene structure.

A Highly Proliferative Group IIC Intron from Geobacillus stearothermophilus Reveals New Features of Group II Intron Mobility and Splicing

The thermostable Geobacillus stearothermophilus GsI-IIC intron is among the few bacterial group II introns found to proliferate to high copy number in its host genome. Here, we developed a bacterial genetic assay for retrohoming and biochemical assays for protein-dependent and self-splicing of GsI-IIC. We found that GsI-IIC, like other group IIC introns, retrohomes into sites having a 5'-exon DNA hairpin, typically from a bacterial transcription terminator, followed by short intron-binding sequences (IBSs) recognized by base pairing of exon-binding sequences (EBSs) in the intron RNA. Intron RNA insertion occurs preferentially but not exclusively into the parental lagging strand at DNA replication forks, using a nascent lagging strand DNA as a primer for reverse transcription. In vivo mobility assays, selections, and mutagenesis indicated that a variety of GC-rich DNA hairpins of 7-19 bp with continuous base pairs or internal elbow regions support efficient intron mobility and identified a critically recognized nucleotide (T-5) between the hairpin and IBS1, a feature not reported previously for group IIC introns. Neither the hairpin nor T-5 is required for intron excision or lariat formation during RNA splicing, but the 5'-exon sequence can affect the efficiency of exon ligation. Structural modeling suggests that the 5'-exon DNA hairpin and T-5 bind to the thumb and DNA-binding domains of GsI-IIC reverse transcriptase. This mode of DNA target site recognition enables the intron to proliferate to high copy number by recognizing numerous transcription terminators and then finding the best match for the EBS/IBS interactions within a short distance downstream.

Molecular Mechanism and Evolution of Nuclear Pre-mRNA and Group II Intron Splicing: Insights from Cryo-Electron Microscopy Structures

Nuclear pre-mRNA splicing and group II intron self-splicing both proceed by two-step transesterification reactions via a lariat intron intermediate. Recently determined cryo-electron microscopy (cryo-EM) structures of catalytically active spliceosomes revealed the RNA-based catalytic core and showed how pre-mRNA substrates and reaction products are positioned in the active site. These findings highlight a strong structural similarity to the group II intron active site, strengthening the notion that group II introns and spliceosomes evolved from a common ancestor. Prp8, the largest and most conserved protein in the spliceosome, cradles the active site RNA. Prp8 and group II intron maturase have a similar domain architecture, suggesting that they also share a common evolutionary origin. The interactions between maturase and key group II intron RNA elements, such as the exon-binding loop and domains V and VI, are recapitulated in the interactions between Prp8 and key elements in the spliceosome's catalytic RNA core. Structural comparisons suggest that the extensive RNA scaffold of the group II intron was gradually replaced by proteins as the spliceosome evolved. A plausible model of spliceosome evolution is discussed.

Group II Intron Self-Splicing

Group II introns are large, autocatalytic ribozymes that catalyze RNA splicing and retrotransposition. Splicing by group II introns plays a major role in the metabolism of plants, fungi, and yeast and contributes to genetic variation in many bacteria. Group II introns have played a major role in genome evolution, as they are likely progenitors of spliceosomal introns, retroelements, and other machinery that controls genetic variation and stability. The structure and catalytic mechanism of group II introns have recently been elucidated through a combination of genetics, chemical biology, solution biochemistry, and crystallography. These studies reveal a dynamic machine that cycles progressively through multiple conformations as it stimulates the various stages of splicing. A central active site, containing a reactive metal ion cluster, catalyzes both steps of self-splicing. These studies provide insights into RNA structure, folding, and catalysis, as they raise new questions about the behavior of RNA machines.

Mobile Group II Introns as Ancestral Eukaryotic Elements

The duality of group II introns, capable of carrying out both self-splicing and retromobility reactions, is hypothesized to have played a profound role in the evolution of eukaryotes. These introns likely provided the framework for the emergence of eukaryotic retroelements, spliceosomal introns and other key components of the spliceosome. Group II introns are found in all three domains of life and are therefore considered to be exceptionally successful mobile genetic elements. Initially identified in organellar genomes, group II introns are found in bacteria, chloroplasts, and mitochondria of plants and fungi, but not in nuclear genomes. Although there is no doubt that prokaryotic and organellar group II introns are evolutionary related, there are remarkable differences in survival strategies between them. Furthermore, an evolutionary relationship of group II introns to eukaryotic retroelements, including telomeres, and spliceosomes is unmistakable.

Structure determination of group II introns

Group II introns are self-splicing catalytic RNAs that are able to excise themselves from pre-mRNAs using a mechanism identical to that utilized by the spliceosome. Both structural and phylogenetic data support the hypothesis that group II introns and the spliceosome share a common ancestor. Structures of group II introns have given insight into the active site required for the catalysis of RNA splicing. This review outlines crucial aspects of the structure determination of group II introns such as sample preparation and data processing. Given that group II introns are large RNAs that must be synthesized through in vitro transcription, there are special considerations that must be taken into account in terms of purification and crystallization, as compared to the isolation of large intact ribonucleoprotein complexes such as the ribosome. We specifically focus on the methodology used to determine the structure of the eukaryotic group II intron lariat from the brown algae Pylaiella littoralis. The techniques described in this review can also be applied for the structure determination of other large RNAs.

Functionality of In vitro Reconstituted Group II Intron RmInt1-Derived Ribonucleoprotein Particles

The functional unit of mobile group II introns is a ribonucleoprotein particle (RNP) consisting of the intron-encoded protein (IEP) and the excised intron RNA. The IEP has reverse transcriptase activity but also promotes RNA splicing, and the RNA-protein complex triggers site-specific DNA insertion by reverse splicing, in a process called retrohoming. In vitro reconstituted ribonucleoprotein complexes from the Lactococcus lactis group II intron Ll.LtrB, which produce a double strand break, have recently been studied as a means of developing group II intron-based gene targeting methods for higher organisms. The Sinorhizobium meliloti group II intron RmInt1 is an efficient mobile retroelement, the dispersal of which appears to be linked to transient single-stranded DNA during replication. The RmInt1IEP lacks the endonuclease domain (En) and cannot cut the bottom strand to generate the 3' end to initiate reverse transcription. We used an Escherichia coli expression system to produce soluble and active RmInt1 IEP and reconstituted RNPs with purified components in vitro. The RNPs generated were functional and reverse-spliced into a single-stranded DNA target. This work constitutes the starting point for the use of group II introns lacking DNA endonuclease domain-derived RNPs for highly specific gene targeting methods.

An Unexplored Diversity of Reverse Transcriptases in Bacteria

Reverse transcriptases (RTs) are usually thought of as eukaryotic enzymes, but they are also present in bacteria and likely originated in bacteria and migrated to eukaryotes. Only three types of bacterial retroelements have been substantially characterized: group II introns, diversity-generating retroelements, and retrons. Recent work, however, has identified a myriad of uncharacterized RTs and RT-related sequences in bacterial genomes, which exhibit great sequence diversity and a range of domain structures. Apart from group II introns, none of these putative RTs show evidence of active retromobility. Instead, available information suggests that they are involved in useful processes, sometimes related to phages or phage resistance. This article reviews our knowledge of both characterized and uncharacterized RTs in bacteria. The range of their sequences and genomic contexts promises the discovery of new biochemical reactions and biological phenomena.

Mobile Bacterial Group II Introns at the Crux of Eukaryotic Evolution

This review focuses on recent developments in our understanding of group II intron function, the relationships of these introns to retrotransposons and spliceosomes, and how their common features have informed thinking about bacterial group II introns as key elements in eukaryotic evolution. Reverse transcriptase-mediated and host factor-aided intron retrohoming pathways are considered along with retrotransposition mechanisms to novel sites in bacteria, where group II introns are thought to have originated. DNA target recognition and movement by target-primed reverse transcription infer an evolutionary relationship among group II introns, non-LTR retrotransposons, such as LINE elements, and telomerase. Additionally, group II introns are almost certainly the progenitors of spliceosomal introns. Their profound similarities include splicing chemistry extending to RNA catalysis, reaction stereochemistry, and the position of two divalent metals that perform catalysis at the RNA active site. There are also sequence and structural similarities between group II introns and the spliceosome's small nuclear RNAs (snRNAs) and between a highly conserved core spliceosomal protein Prp8 and a group II intron-like reverse transcriptase. It has been proposed that group II introns entered eukaryotes during bacterial endosymbiosis or bacterial-archaeal fusion, proliferated within the nuclear genome, necessitating evolution of the nuclear envelope, and fragmented giving rise to spliceosomal introns. Thus, these bacterial self-splicing mobile elements have fundamentally impacted the composition of extant eukaryotic genomes, including the human genome, most of which is derived from close relatives of mobile group II introns.

Activating the branch-forming splicing pathway by reengineering the ribozyme component of a natural group II intron

When assayed in vitro, group IIC self-splicing introns, which target bacterial Rho-independent transcription terminators, generally fail to yield branched products during splicing despite their possessing a seemingly normal branchpoint. Starting with intron O.i.I1 from Oceanobacillus iheyensis, whose crystallographically determined structure lacks branchpoint-containing domain VI, we attempted to determine what makes this intron unfit for in vitro branch formation. A major factor was found to be the length of the helix at the base of domain VI: 4 base pairs (bp) are required for efficient branching, even though a majority of group IIC introns have a 3-bp helix. Equally important for lariat formation is the removal of interactions between ribozyme domains II and VI, which are specific to the second step of splicing. Conversely, mismatching of domain VI and its proposed first-step receptor in subdomain IC1 was found to be detrimental; these data suggest that the intron-encoded protein may promote branch formation partly by modulating the equilibrium between conformations specific to the first and second steps of splicing. As a practical application, we show that by making just two changes to the O.i.I1 ribozyme, it is possible to generate sufficient amounts of lariat intron for the latter to be purified and used in kinetic assays in which folding and reaction are uncoupled.

Group II introns: versatile ribozymes and retroelements

Group II introns are catalytic RNAs (ribozymes) and retroelements found in the genomes of bacteria, archaebacteria, and organelles of some eukaryotes. The prototypical retroelement form consists of a structurally conserved RNA and a multidomain reverse transcriptase protein, which interact with each other to mediate splicing and mobility reactions. A wealth of biochemical, cross-linking, and X-ray crystal structure studies have helped to reveal how the two components cooperate to carry out the splicing and mobility reactions. In addition to the standard retroelement form, group II introns have evolved into derivative forms by either losing specific splicing or mobility characteristics, or becoming functionally specialized. Of particular interest are the eukaryotic derivatives-the spliceosome, spliceosomal introns, and non-LTR retroelements-which together make up approximately half of the human genome. On a practical level, the properties of group II introns have been exploited to develop group II intron-based biotechnological tools. WIREs RNA 2016, 7:341-355. doi: 10.1002/wrna.1339 For further resources related to this article, please visit the WIREs website.

Evolution of group II introns

Present in the genomes of bacteria and eukaryotic organelles, group II introns are an ancient class of ribozymes and retroelements that are believed to have been the ancestors of nuclear pre-mRNA introns. Despite long-standing speculation, there is limited understanding about the actual pathway by which group II introns evolved into eukaryotic introns. In this review, we focus on the evolution of group II introns themselves. We describe the different forms of group II introns known to exist in nature and then address how these forms may have evolved to give rise to spliceosomal introns and other genetic elements. Finally, we summarize the structural and biochemical parallels between group II introns and the spliceosome, including recent data that strongly support their hypothesized evolutionary relationship.

Novel RNA structural features of an alternatively splicing group II intron from Clostridium tetani

Group II introns are ribozymes in bacterial and organellar genomes that function as self-splicing introns and as retroelements. Previously, we reported that the group II intron C.te.I1 of Clostridium tetani alternatively splices in vivo to produce five distinct coding mRNAs. Accurate fusion of upstream and downstream reading frames requires a shifted 5' splice site located 8 nt upstream of the usual 5' GUGYG motif. This site is specified by the ribozyme through an altered intron/exon-binding site 1 (IBS1-EBS1) pairing. Here we use mutagenesis and self-splicing assays to investigate in more detail the significance of the structural features of the C.te.I1 ribozyme. The shifted 5' splice site is shown to be affected by structures in addition to IBS1-EBS1, and unlike other group II introns, C.te.I1 appears to require a spacer between IBS1 and the GUGYG motif. In addition, the mechanism of 3' exon recognition is modified from the ancestral IIB mechanism to a IIA-like mechanism that appears to be longer than the typical single base-pair interaction and may extend up to 4 bp. The novel ribozyme properties that have evolved for C.te.I1 illustrate the plasticity of group II introns in adapting new structural and catalytic properties that can be utilized to affect gene expression.

Use of the computer-retargeted group II intron RmInt1 of Sinorhizobium meliloti for gene targeting

Gene-targeting vectors derived from mobile group II introns capable of forming a ribonucleoprotein (RNP) complex containing excised intron lariat RNA and an intron-encoded protein (IEP) with reverse transcriptase (RT), maturase, and endonuclease (En) activities have been described. RmInt1 is an efficient mobile group II intron with an IEP lacking the En domain. We performed a comprehensive study of the rules governing RmInt1 target site recognition based on selection experiments with donor and recipient plasmid libraries, with randomization of the elements of the intron RNA involved in target recognition and the wild-type target site. The data obtained were used to develop a computer algorithm for identifying potential RmInt1 targets in any DNA sequence. Using this algorithm, we modified RmInt1 for the efficient recognition of DNA target sites at different locations in the Sinorhizobium meliloti chromosome. The retargeted RmInt1 integrated efficiently into the chromosome, regardless of the location of the target gene. Our results suggest that RmInt1 could be efficiently adapted for gene targeting.

Biotechnological applications of mobile group II introns and their reverse transcriptases: gene targeting, RNA-seq, and non-coding RNA analysis

Mobile group II introns are bacterial retrotransposons that combine the activities of an autocatalytic intron RNA (a ribozyme) and an intron-encoded reverse transcriptase to insert site-specifically into DNA. They recognize DNA target sites largely by base pairing of sequences within the intron RNA and achieve high DNA target specificity by using the ribozyme active site to couple correct base pairing to RNA-catalyzed intron integration. Algorithms have been developed to program the DNA target site specificity of several mobile group II introns, allowing them to be made into ‘targetrons.’ Targetrons function for gene targeting in a wide variety of bacteria and typically integrate at efficiencies high enough to be screened easily by colony PCR, without the need for selectable markers. Targetrons have found wide application in microbiological research, enabling gene targeting and genetic engineering of bacteria that had been intractable to other methods. Recently, a thermostable targetron has been developed for use in bacterial thermophiles, and new methods have been developed for using targetrons to position recombinase recognition sites, enabling large-scale genome-editing operations, such as deletions, inversions, insertions, and ‘cut-and-pastes’ (that is, translocation of large DNA segments), in a wide range of bacteria at high efficiency. Using targetrons in eukaryotes presents challenges due to the difficulties of nuclear localization and sub-optimal magnesium concentrations, although supplementation with magnesium can increase integration efficiency, and directed evolution is being employed to overcome these barriers. Finally, spurred by new methods for expressing group II intron reverse transcriptases that yield large amounts of highly active protein, thermostable group II intron reverse transcriptases from bacterial thermophiles are being used as research tools for a variety of applications, including qRT-PCR and next-generation RNA sequencing (RNA-seq). The high processivity and fidelity of group II intron reverse transcriptases along with their novel template-switching activity, which can directly link RNA-seq adaptor sequences to cDNAs during reverse transcription, open new approaches for RNA-seq and the identification and profiling of non-coding RNAs, with potentially wide applications in research and biotechnology.

A pipeline of programs for collecting and analyzing group II intron retroelement sequences from GenBank

Background

Accurate and complete identification of mobile elements is a challenging task in the current era of sequencing, given their large numbers and frequent truncations. Group II intron retroelements, which consist of a ribozyme and an intron-encoded protein (IEP), are usually identified in bacterial genomes through their IEP; however, the RNA component that defines the intron boundaries is often difficult to identify because of a lack of strong sequence conservation corresponding to the RNA structure. Compounding the problem of boundary definition is the fact that a majority of group II intron copies in bacteria are truncated.

Results

Here we present a pipeline of 11 programs that collect and analyze group II intron sequences from GenBank. The pipeline begins with a BLAST search of GenBank using a set of representative group II IEPs as queries. Subsequent steps download the corresponding genomic sequences and flanks, filter out non-group II introns, assign introns to phylogenetic subclasses, filter out incomplete and/or non-functional introns, and assign IEP sequences and RNA boundaries to the full-length introns. In the final step, the redundancy in the data set is reduced by grouping introns into sets of ≥95% identity, with one example sequence chosen to be the representative.

Conclusions

These programs should be useful for comprehensive identification of group II introns in sequence databases as data continue to rapidly accumulate.

Predicted group II intron lineages E and F comprise catalytically active ribozymes

Group II introns are self-splicing, retrotransposable ribozymes that contribute to gene expression and evolution in most organisms. The ongoing identification of new group II introns and recent bioinformatic analyses have suggested that there are novel lineages, which include the group IIE and IIF introns. Because the function and biochemical activity of group IIE and IIF introns have never been experimentally tested and because these introns appear to have features that distinguish them from other introns, we set out to determine if they were indeed self-splicing, catalytically active RNA molecules. To this end, we transcribed and studied a set of diverse group IIE and IIF introns, quantitatively characterizing their in vitro self-splicing reactivity, ionic requirements, and reaction products. In addition, we used mutational analysis to determine the relative role of the EBS-IBS 1 and 2 recognition elements during splicing by these introns. We show that group IIE and IIF introns are indeed distinct active intron families, with different reactivities and structures. We show that the group IIE introns self-splice exclusively through the hydrolytic pathway, while group IIF introns can also catalyze transesterifications. Intriguingly, we observe one group IIF intron that forms circular intron. Finally, despite an apparent EBS2-IBS2 duplex in the sequences of these introns, we find that this interaction plays no role during self-splicing in vitro. It is now clear that the group IIE and IIF introns are functional ribozymes, with distinctive properties that may be useful for biotechnological applications, and which may contribute to the biology of host organisms.

Selection-driven extinction dynamics for group II introns in Enterobacteriales

Transposable elements (TEs) are one of the major driving forces of genome evolution, raising the question of the long-term dynamics underlying their evolutionary success. Some TEs were proposed to evolve under a pattern of periodic extinctions-recolonizations, in which elements recurrently invade and quickly proliferate within their host genomes, then start to disappear until total extinction. Depending on the model, TE extinction is assumed to be driven by purifying selection against colonized host genomes (Sel-DE model) or by saturation of host genomes (Sat-DE model). Bacterial group II introns are suspected to follow an extinction-recolonization model of evolution, but whether they follow Sel-DE or Sat-DE dynamics is not known. Our analysis of almost 200 group II intron copies from 90 sequenced Enterobacteriales genomes confirms their extinction-recolonization dynamics: patchy element distributions among genera and even among strains within genera, acquisition of new group II introns through plasmids or other mobile genetic elements, and evidence for recent proliferations in some genomes. Distributions of recent and past proliferations and of their respective homing sites further provide strong support for the Sel-DE model, suggesting that group II introns are deleterious to their hosts. Overall, our observations emphasize the critical impact of host properties on TE dynamics.

Target site recognition by a diversity-generating retroelement

Diversity-generating retroelements (DGRs) are in vivo sequence diversification machines that are widely distributed in bacterial, phage, and plasmid genomes. They function to introduce vast amounts of targeted diversity into protein-encoding DNA sequences via mutagenic homing. Adenine residues are converted to random nucleotides in a retrotransposition process from a donor template repeat (TR) to a recipient variable repeat (VR). Using the Bordetella bacteriophage BPP-1 element as a prototype, we have characterized requirements for DGR target site function. Although sequences upstream of VR are dispensable, a 24 bp sequence immediately downstream of VR, which contains short inverted repeats, is required for efficient retrohoming. The inverted repeats form a hairpin or cruciform structure and mutational analysis demonstrated that, while the structure of the stem is important, its sequence can vary. In contrast, the loop has a sequence-dependent function. Structure-specific nuclease digestion confirmed the existence of a DNA hairpin/cruciform, and marker coconversion assays demonstrated that it influences the efficiency, but not the site of cDNA integration. Comparisons with other phage DGRs suggested that similar structures are a conserved feature of target sequences. Using a kanamycin resistance determinant as a reporter, we found that transplantation of the IMH and hairpin/cruciform-forming region was sufficient to target the DGR diversification machinery to a heterologous gene. In addition to furthering our understanding of DGR retrohoming, our results suggest that DGRs may provide unique tools for directed protein evolution via in vivo DNA diversification.

Diversity-generating retroelements function through a unique, reverse transcriptase–mediated “copy and replace” mechanism that enables repeated rounds of protein diversification, selection, and optimization. The ability of DGRs to introduce targeted diversity into protein-coding DNA sequences has the potential to dramatically accelerate the evolution of adaptive traits. The utility of these elements in nature is underscored by their widespread distribution throughout the bacterial domain. Here we define DNA sequences and structures that are necessary and sufficient to direct the diversification machinery to specified target sequences. In addition to providing mechanistic insights into conserved features of DGR activity, our results provide a blueprint for the use of DGRs for a broad range of protein engineering applications.

Group IIC intron with an unusual target of integration in Enterobacter cloacae

A potential role of group IIC-attC introns in integron gene cassette formation, that is, the way in which they could provide the attC sequence essential for recombination, has been proposed. Group IIC introns usually target the attC site of gene cassettes and more specifically their inverse core. Here we characterized a novel group IIC intron targeting the core site of the aadA1 gene cassette attC site (aadA1-qacEΔ1 gene cassette junction) from enterobacterial isolates. Intron mobility (retrohoming) was analyzed using a two-plasmid assay performed in Escherichia coli. Intron mobility assays confirmed the mobilization-integration of the group II intron into the core site of the aadA2, bla(VIM-2), bla(CARB-2), aac(6')-Ib, dfrXVb, arr2, cmlA4, and aadB gene cassettes but not into the attI site. This mobility was dependent on maturase activity. Reverse transcriptase PCR showed that this intron was transcriptionally active, and an intermediate circular form was detected by inverse PCR. This element was linked to the bla(VEB-1) extended-spectrum β-lactamase gene in a high number of enterobacterial isolates. A phylogenetic tree showed that the identified element was located in a branch separate from group IIC-attC introns, being an IIC intron possessing the ability to integrate using the core site of the attC sites as target.

Group II introns: mobile ribozymes that invade DNA

Group II introns are mobile ribozymes that self-splice from precursor RNAs to yield excised intron lariat RNAs, which then invade new genomic DNA sites by reverse splicing. The introns encode a reverse transcriptase that stabilizes the catalytically active RNA structure for forward and reverse splicing, and afterwards converts the integrated intron RNA back into DNA. The characteristics of group II introns suggest that they or their close relatives were evolutionary ancestors of spliceosomal introns, the spliceosome, and retrotransposons in eukaryotes. Further, their ribozyme-based DNA integration mechanism enabled the development of group II introns into gene targeting vectors ("targetrons"), which have the unique feature of readily programmable DNA target specificity.

Alternative splicing by participation of the group II intron ORF in extremely halotolerant and alkaliphilic Oceanobacillus iheyensis

Group II introns inserted into genes often undergo splicing at unexpected sites, and participate in the transcription of host genes. We identified five copies of a group II intron, designated Oi.Int, in the genome of an extremely halotolerant and alkaliphilic bacillus, Oceanobacillus iheyensis. The Oi.Int4 differs from the Oi.Int3 at four bases. The ligated exons of the Oi.Int4 could not be detected by RT-PCR assays in vivo or in vitro although group II introns can generally self-splice in vitro without the involvement of an intron-encoded open reading frame (ORF). In the Oi.Int4 mutants with base substitutions within the ORF, ligated exons were detected by in vitro self-splicing. It was clear that the ligation of exons during splicing is affected by the sequence of the intron-encoded ORF since the splice sites corresponded to the joining sites of the intron. In addition, the mutant introns showed unexpected multiple products with alternative 5' splice sites. These findings imply that alternative 5' splicing which causes a functional change of ligated exons presumably has influenced past adaptations of O. iheyensis to various environmental changes.

Diversity and strength of internal outward-oriented promoters in group IIC-attC introns

Integrons are genetic elements that incorporate mobile gene cassettes by site-specific recombination and express them as an operon from a promoter (Pc) located upstream of the cassette insertion site. Most gene cassettes found in integrons contain only one gene followed by an attC recombination site. We have recently shown that a specific lineage of group IIC introns, named group IIC-attC introns, inserts into the bottom strand sequence of attC sites. Here, we show that S.ma.I2, a group IIC-attC intron inserted in an integron cassette array of Serratia marcescens, impedes transcription from Pc while allowing expression of the following antibiotic resistance cassette using an internal outward-oriented promoter (P_out). Bioinformatic analyses indicate that one or two putative P_out, which have sequence similarities with the Escherichia coli consensus promoters, are conserved in most group IIC-attC intron sequences. We show that P_out with different versions of the −35 and −10 sequences are functionally active in expressing a promoterless chloramphenicol acetyltransferase (cat) reporter gene in E. coli. P_out in group IIC-attC introns may therefore play a role in the expression of one or more gene cassettes whose transcription from Pc would otherwise be impeded by insertion of the intron.

A group IIC-type intron interrupts the rRNA methylase gene of Geobacillus stearothermophilus strain 10

Group IIC introns insert next to the stem-loop structure of rho-independent transcription terminators, thus avoiding intact genes. The insertion sites of 17 copies of the G.st.I1 intron from Geobacillus stearothermophilus were compared. One copy of the intron was found to interrupt an open reading frame (ORF) encoding an rRNA methylase.

Structural and functional evolution of group II intron ribozymes: insights from unusual elements carrying a 3' extension

Group II introns are large RNA elements that interrupt genes. They are self-splicing ribozymes that catalyze their own excision and mobile retroelements that can invade new genomic DNA sites. While group II introns typically consist of six structural domains, a number of elements containing an unusual 3' extension of 53-56 nucleotides have recently been identified. Bioinformatic and functional analyses of these introns have revealed that they belong to two evolutionary subgroups and that the 3' extension has a differential effect on the splicing reactions for introns of the two subgroups, a functional difference that may be related to structural differences between the introns. In addition, there is phylogenetic evidence that some introns are mobile with their extension. The unusual introns have provided dramatic examples of the structural and functional evolution of group II ribozymes that have been able to accommodate an extra segment into their compact structure while maintaining functionality.

Group IIC intron mobility into attC sites involves a bulged DNA stem-loop motif

Bacterial group IIC introns are a subclass of group II intron ribozymes that are typically located downstream from transcriptional terminators. Class IIC-attC introns constitute a monophyletic subset of subgroup IIC, which preferentially insert into site-specific recombination sequences for integron integrases (attC). attCs are a diverse family of nucleotide sequences composed of conserved inverted repeats that flank a variable, but palindromic, central region. In this study, we used both PCR and colony patch hybridization methods to determine the basis for recognition of the attC(aadA1) stem-loop motif by the Serratia marcescens intron (S.ma.I2) in vivo. The quantitative results showed that mobility into the wild-type site occurs at a frequency of 18%, and is strongly biased by the orientation of the homing site relative to the direction of DNA replication. S.ma.I2 mobility results into mutant attC(aadA1) sites are consistent with recognition of stem-loop motifs in unwound DNA. The homing frequency results showed that, while the entire attC sequence is not necessary for recognition of the insertion site, short deletions of the attC stem-loop motif inhibited the intron mobility. Moreover, our data show that S.ma.I2 requires a bulged base in the folded attC stem for high homing frequency. We demonstrate that the IBS1/IBS3 motifs and two bulge bases conserved among attCs determine S.ma.I2 homing specificity for the attC bottom strand. These results suggest that class IIC-attC introns tolerate attC variation by recognition of a bulged hairpin DNA motif rather than a specific sequence.

Potential role of group IIC-attC introns in integron cassette formation

Integrons are natural expression vectors in which gene cassettes are integrated downstream of a promoter region by a site-specific recombinase. Gene cassettes usually consist of a single gene followed by a recombination site designated attC. A major unanswered question is how a gene becomes associated with an attC site. Here, we investigate the potential role of a specific lineage of group IIC introns, named group IIC-attC, in cassette formation. Group IIC-attC introns preferentially target attC while retaining the ability to target transcriptional terminators. We show using a PCR-based mobility assay with Escherichia coli that the S.ma.I2 intron from the genome of a clinical isolate of Serratia marcescens can target both attC site and putative terminator motifs of resistance genes. Quantitative results showed that S.ma.I2 is more efficient in targeting various attC sequences than three group IIC-attC introns (54 to 64% sequence identity) from the genomes of environmental isolates. We also show that purified group IIC-attC intron-encoded reverse transcriptases have both RNA-dependent and DNA-dependent DNA polymerase activities in vitro. These data permit us to suggest a new model for gene cassette formation, in which a group IIC-attC intron targets separately a transcriptional terminator adjoining a gene and an isolated attC, joins the gene and the attC by homologous recombination, and then splices and reverse transcribes a gene-attC RNA template, leading to the formation of a cassette.

Structural insights into RNA splicing

Intron splicing is a fundamental biological process whereby noncoding sequences are removed from precursor RNAs. Recent work has provided new insights into the structural features and reaction mechanisms of two introns that catalyze their own splicing from precursor RNA: the group I and II introns. In addition, there is an increasing amount of structural information on the spliceosome, which is a ribonucleoprotein machine that catalyzes nuclear pre-mRNA splicing in eukaryotes. Here, we compare structures and catalytic mechanisms of self-splicing RNAs and we discuss the possible implications for spliceosomal reaction mechanisms.

EcI5, a group IIB intron with high retrohoming frequency: DNA target site recognition and use in gene targeting

We find that group II intron EcI5, a subclass CL/IIB1 intron from an Escherichia coli virulence plasmid, is highly active in retrohoming in E. coli. Both full-length EcI5 and an EcI5-DeltaORF intron with the intron-encoded protein expressed separately from the same donor plasmid retrohome into a recipient plasmid target site at substantially higher frequencies than do similarly configured Lactococcus lactis Ll.LtrB introns. A comprehensive view of DNA target site recognition by EcI5 was obtained from selection experiments with donor and recipient plasmid libraries in which different recognition elements were randomized. These experiments suggest that EcI5, like other mobile group II introns, recognizes DNA target sequences by using both the intron-encoded protein and base-pairing of the intron RNA, with the latter involving EBS1, EBS2, and EBS3 sequences characteristic of class IIB introns. The intron-encoded protein appears to recognize a small number of bases flanking those recognized by the intron RNA, but their identity is different than in previously characterized group II introns. A computer algorithm based on the empirically determined DNA recognition rules enabled retargeting of EcI5 to integrate specifically at 10 different sites in the chromosomal lacZ gene at frequencies up to 98% without selection. Our findings provide insight into modes of DNA target site recognition used by mobile group II introns. More generally, they show how the diversity of mobile group II introns can be exploited to provide a large variety of different target specificities and potentially other useful properties for gene targeting.

Structural basis for exon recognition by a group II intron

Free group II introns are infectious retroelements that can bind and insert themselves into RNA and DNA molecules via reverse splicing. Here we report the 3.4-A crystal structure of a complex between an oligonucleotide target substrate and a group IIC intron, as well as the refined free intron structure. The structure of the complex reveals the conformation of motifs involved in exon recognition by group II introns.

Group II introns in eubacteria and archaea: ORF-less introns and new varieties

Group II introns are a major class of ribozymes found in bacteria, mitochondria, and plastids. Many introns contain reverse transcriptase open reading frames (ORFs) that confer mobility to the introns and allow them to persist as selfish DNAs. Here, we report an updated compilation of group II introns in Eubacteria and Archaea comprising 234 introns. One new phylogenetic class is identified, as well as several specialized lineages. In addition, we undertake a detailed search for ORF-less group II introns in bacterial genomes in order to find undiscovered introns that either entirely lack an ORF or encode a novel ORF. Unlike organellar group II introns, we find only a handful of ORF-less introns in bacteria, suggesting that if a substantial number exist, they must be divergent from known introns. Together, these results highlight the retroelement character of bacterial group II introns, and suggest that their long-term survival is dependent upon retromobility.

The S.ma.I2 class C group II intron inserts at integron attC sites

We previously found the class C S.ma.I2 group II (GII) intron in Serratia marcescens SCH909 inserted into the variable region of a class 1 integron within the attC site of the ant(2'')-Ia gene cassette. Here, we demonstrate that this ant(2'')-Ia : : S.ma.I2 gene cassette is a recombinationally active element despite the presence of the S.ma.I2 intron. In addition, S.ma.I2 is an active GII intron capable of performing self-splicing and invading specific target sites. Intron homing to a DNA target site is RecA-independent and recognizes the intron binding site (IBS)1 and IBS3 regions, formed by the 5' TTGTT 3' consensus sequence located within the inverse core site of attC integrons. Our results also indicate that the process for S.ma.I2 intron mobilization involves a secondary structure provided by the folding of the complete attC site. Moreover, phylogenetic analysis of the class C GII introns showed a clear divergent clade formed by introns that insert within specific sites usually associated with lateral gene transfer.

Survey of group I and group II introns in 29 sequenced genomes of the Bacillus cereus group: insights into their spread and evolution

Group I and group II introns are different catalytic self-splicing and mobile RNA elements that contribute to genome dynamics. In this study, we have analyzed their distribution and evolution in 29 sequenced genomes from the Bacillus cereus group of bacteria. Introns were of different structural classes and evolutionary origins, and a large number of nearly identical elements are shared between multiple strains of different sources, suggesting recent lateral transfers and/or that introns are under a strong selection pressure. Altogether, 73 group I introns were identified, inserted in essential genes from the chromosome or newly described prophages, including the first elements found within phages in bacterial plasmids. Notably, bacteriophages are an important source for spreading group I introns between strains. Furthermore, 77 group II introns were found within a diverse set of chromosomal and plasmidic genes. Unusual findings include elements located within conserved DNA metabolism and repair genes and one intron inserted within a novel retroelement. Group II introns are mainly disseminated via plasmids and can subsequently invade the host genome, in particular by coupling mobility with host cell replication. This study reveals a very high diversity and variability of mobile introns in B. cereus group strains.

Molecular analysis of multiresistant porcine Salmonella enterica subsp. enterica serovar Bredeney isolates from Southern Brazil: identification of resistance genes, integrons and a group II intron

The relationships of 83 porcine Salmonella enterica subsp. enterica serovar Bredeney isolates obtained at two slaughterhouses in Southern Brazil were analysed by XbaI and BlnI macrorestriction analysis, plasmid profiling and determination of antimicrobial resistance patterns. Twenty-nine XbaI and 30 BlnI macrorestriction patterns were identified. The 72 plasmid-bearing isolates exhibited 20 different plasmid profiles. Multiresistance was detected in 49 isolates (59%), of which 39 isolates showed at least resistance to sulfonamides, tetracyclines, chloramphenicol, streptomycin, kanamycin and/or ampicillin. A representative subset of 12 isolates was chosen for identification of resistance genes, their localisation and transferability. The sulfonamide resistance genes sul1, sul2 and sul3, the tetracycline resistance genes tet(A) and tet(B), the phenicol resistance genes catA1 and floR, the streptomycin resistance gene strA, the kanamycin resistance gene aphA1 and the ampicillin resistance gene bla(TEM) were detected and found to be located most frequently on plasmids. In addition, class 1 and 2 integrons with the cassette arrangements dfrA21/bla OXA-129/aadA1 and dfrA1/sat1/aadA1, respectively, were detected. A group II intron was found to be inserted into the 59-base element of an aadA1 gene cassette in a class 1 integron. This study revealed a wide genomic variety among the S. Bredeney isolates, and the high number of multiresistant isolates may point towards the risks that these S. Bredeney isolates can represent to human health.

A family of insertion sequences that impacts integrons by specific targeting of gene cassette recombination sites, the IS1111-attC Group

Integrons facilitate the evolution of complex phenotypes by physical and transcriptional linkage of genes. They can be categorized as chromosomal integrons (CIs) or mobile resistance integrons (MRIs). The significance of MRIs for the problem of multiple antibiotic resistance is well established. CIs are more widespread, but their only demonstrated significance is as a reservoir of gene cassettes for MRIs. In characterizing CIs associated with Pseudomonas, we discovered a subfamily of insertion sequences, termed the IS1111-attC group, that insert into the recombination sites of gene cassettes (attC site) by site-specific recombination. IS1111-attC elements appear to have recently spread from Pseudomonas species to clinical class 1 integrons. Such elements are expected to significantly impact integrons. To explore this further, we examined CIs in 24 strains representing multiple levels of evolutionary divergence within the genus Pseudomonas. Cassette arrays frequently had a degenerated "footprint" of an IS1111-attC group element at their terminus and in three cases were occupied by multiple functional IS1111-attC elements. Within Pseudomonas spp. the IS-integron interaction appears to follow an evolutionarily rapid cycle of infection, expansion, and extinction. The final outcome is extinction of the IS element and modification of the right-hand boundary of the integron. This system represents an unusual example of convergent evolution whereby heterologous families of site-specific recombinases of distinct genetic elements have adopted the same target site. The interactions described here represent a model for evolutionary processes that offer insights to a number of aspects of the biology of integrons and other mosaic genetic elements.

Crystal structure of a self-spliced group II intron

Group II introns are self-splicing ribozymes that catalyze their own excision from precursor transcripts and insertion into new genetic locations. Here we report the crystal structure of an intact, self-spliced group II intron from Oceanobacillus iheyensis at 3.1 angstrom resolution. An extensive network of tertiary interactions facilitates the ordered packing of intron subdomains around a ribozyme core that includes catalytic domain V. The bulge of domain V adopts an unusual helical structure that is located adjacent to a major groove triple helix (catalytic triplex). The bulge and catalytic triplex jointly coordinate two divalent metal ions in a configuration that is consistent with a two-metal ion mechanism for catalysis. Structural and functional analogies support the hypothesis that group II introns and the spliceosome share a common ancestor.