Pulsed quantum optomechanics

Squeezed light from an oscillator measured at the rate of oscillation

Sufficiently fast continuous measurements of the position of an oscillator approach measurements projective on position eigenstates. We evidence the transition into the projective regime for a spin oscillator within an ensemble of 2 × 1010 room-temperature atoms by observing correlations between the quadratures of the meter light field. These correlations squeeze the fluctuations of one light quadrature below the vacuum level. When the measurement is slower than the oscillation, we generate 11 . 5 - 1.5 + 2.5 dB and detect 8 . 5 - 0.1 + 0.1 dB of squeezing in a tunable band that is a fraction of the resonance frequency. When the measurement is as fast as the oscillation, we detect 4.7 dB of squeezing that spans more than one decade of frequencies below the resonance. Our results demonstrate a new regime of continuous quantum measurements on material oscillators, and set a new benchmark for the performance of a linear quantum sensor.

Optomechanical squeezing with strong harmonic mechanical driving

In this paper, we propose an optomechanical scheme for generating mechanical squeezing over the 3 dB limit, with the mechanical mirror being driven by a strong and linear harmonic force. In contrast to parametric mechanical driving, the linearly driven force shakes the mechanical mirror periodically oscillating at twice the mechanical eigenfrequency with large amplitude, where the mechanical mirror can be dissipatively stabilized by the engineered cavity reservoir to a dynamical squeezed steady state with a maximum degree of squeezing over 8 dB. The mechanical squeezing of more than 3 dB can be achieved even for a mechanical thermal temperature larger than 100 mK. The scheme can be implemented in a cascaded optomechanical setup, with potential applications in engineering continuous variable entanglement and quantum sensing.

Instabilities near Ultrastrong Coupling in a Microwave Optomechanical Cavity

With artificially engineered systems, it is now possible to realize the coherent interaction rate, which can become comparable to the mode frequencies, a regime known as ultrastrong coupling (USC). We experimentally realize a cavity-electromechanical device using a superconducting waveguide cavity and a mechanical resonator. In the presence of a strong pump, the mechanical-polaritons splitting can nearly reach 81% of the mechanical frequency, overwhelming all the dissipation rates. Approaching the USC limit, the steady-state response becomes unstable. We systematically measure the boundary of the unstable response while varying the pump parameters. The unstable dynamics display rich phases, such as self-induced oscillations, period-doubling bifurcation, and period-tripling oscillations, ultimately leading to the chaotic behavior. The experimental results and their theoretical modeling suggest the importance of residual nonlinear interaction terms in the weak-dissipative regime.

Cavity Quantum Optomechanical Nonlinearities and Position Measurement beyond the Breakdown of the Linearized Approximation

Several optomechanics experiments are now entering the highly sought nonlinear regime where optomechanical interactions are large even for low light levels. Within this regime, new quantum phenomena and improved performance may be achieved; however, a corresponding theoretical formalism of cavity quantum optomechanics that captures the nonlinearities of both the radiation-pressure interaction and the cavity response is needed to unlock these capabilities. Here, we develop such a nonlinear cavity quantum optomechanical framework, which we then utilize to propose how position measurement can be performed beyond the breakdown of the linearized approximation. Our proposal utilizes optical general-dyne detection, ranging from single to dual homodyne, to obtain mechanical position information imprinted onto both the optical amplitude and phase quadratures and enables both pulsed and continuous modes of operation. These cavity optomechanical nonlinearities are now being confronted in a growing number of experiments, and our framework will allow a range of advances to be made in, e.g., quantum metrology, explorations of the standard quantum limit, and quantum measurement and control.

Continuous Optical-to-Mechanical Quantum State Transfer in the Unresolved Sideband Regime

Optical-to-mechanical quantum state transfer is an important capability for future quantum networks, quantum communication, and distributed quantum sensing. However, existing continuous state transfer protocols operate in the resolved sideband regime, necessitating a high-quality optical cavity and a high mechanical resonance frequency. Here, we propose a continuous protocol that operates in the unresolved sideband regime. The protocol is based on feedback cooling, can be implemented with current technology, and is able to transfer non-Gaussian quantum states with high fidelity. Our protocol significantly expands the kinds of optomechanical devices for which continuous optical-to-mechanical state transfer is possible, paving the way toward quantum technological applications and the preparation of macroscopic superpositions to test the fundamentals of quantum science.

High-precision multiparameter estimation of mechanical force by quantum optomechanics

A nanomechanical oscillator can be used as a sensitive probe of a small linearized mechanical force. We propose a simple quantum optomechanical scheme using a coherent light mode in the cavity and weak short-pulsed light-matter interactions. Our main result is that if we transfer some displacement to the mechanical mode in an initialization phase, then a much weaker optomechanical interaction is enough to obtain a high-precision multiparameter estimation of the unknown force. This approach includes not only estimating the displacement caused by the force but also simultaneously observing the phase shift and squeezing of the mechanical mode. We show that the proposed scheme is robust against typical experimental imperfections and demonstrate the feasibility of our scheme using orders of magnitude weaker optomechanical interactions than in previous related works. Thus, we present a simple, robust estimation scheme requiring only very weak light-matter interactions, which could open the way to new nanomechanical sensors.

Mechanical Squeezing via Unstable Dynamics in a Microcavity

We theoretically show that strong mechanical quantum squeezing in a linear optomechanical system can be rapidly generated through the dynamical instability reached in the far red-detuned and ultrastrong coupling regime. We show that this mechanism, which harnesses unstable multimode quantum dynamics, is particularly suited to levitated optomechanics, and we argue for its feasibility for the case of a levitated nanoparticle coupled to a microcavity via coherent scattering. We predict that for submillimeter-sized cavities the particle motion, initially thermal and well above its ground state, becomes mechanically squeezed by tens of decibels on a microsecond timescale. Our results bring forth optical microcavities in the unresolved sideband regime as powerful mechanical squeezers for levitated nanoparticles, and hence as key tools for quantum-enhanced inertial and force sensing.

Remote Generation of Magnon Schrödinger Cat State via Magnon-Photon Entanglement

The magnon cat state represents a macroscopic quantum superposition of collective magnetic excitations of large number spins that not only provides fundamental tests of macroscopic quantum effects but also finds applications in quantum metrology and quantum computation. In particular, remote generation and manipulation of Schrödinger cat states are particularly interesting for the development of long-distance and large-scale quantum information processing. Here, we propose an approach to remotely prepare magnon even or odd cat states by performing local non-Gaussian operations on the optical mode that is entangled with the magnon mode through pulsed optomagnonic interaction. By evaluating key properties of the resulting cat states, we show that for experimentally feasible parameters, they are generated with both high fidelity and nonclassicality, as well as with a size large enough to be useful for quantum technologies. Furthermore, the effects of experimental imperfections such as the error of projective measurements and dark count when performing single-photon operations have been discussed, where the lifetime of the created magnon cat states is expected to be t∼1  μs.

Quantum control of a nanoparticle optically levitated in cryogenic free space

Tests of quantum mechanics on a macroscopic scale require extreme control over mechanical motion and its decoherence^1-3. Quantum control of mechanical motion has been achieved by engineering the radiation-pressure coupling between a micromechanical oscillator and the electromagnetic field in a resonator^4-7. Furthermore, measurement-based feedback control relying on cavity-enhanced detection schemes has been used to cool micromechanical oscillators to their quantum ground states⁸. In contrast to mechanically tethered systems, optically levitated nanoparticles are particularly promising candidates for matter-wave experiments with massive objects^9,10, since their trapping potential is fully controllable. Here we optically levitate a femtogram (10^-15 grams) dielectric particle in cryogenic free space, which suppresses thermal effects sufficiently to make the measurement backaction the dominant decoherence mechanism. With an efficient quantum measurement, we exert quantum control over the dynamics of the particle. We cool its centre-of-mass motion by measurement-based feedback to an average occupancy of 0.65 motional quanta, corresponding to a state purity of 0.43. The absence of an optical resonator and its bandwidth limitations holds promise to transfer the full quantum control available for electromagnetic fields to a mechanical system. Together with the fact that the optical trapping potential is highly controllable, our experimental platform offers a route to investigating quantum mechanics at macroscopic scales¹¹.

Efficient Entanglement of Spin Qubits Mediated by a Hot Mechanical Oscillator

Localized electronic and nuclear spin qubits in the solid state constitute a promising platform for storage and manipulation of quantum information, even at room temperature. However, the development of scalable systems requires the ability to entangle distant spins, which remains a challenge today. We propose and analyze an efficient, heralded scheme that employs a parity measurement in a decoherence free subspace to enable fast and robust entanglement generation between distant spin qubits mediated by a hot mechanical oscillator. We find that high-fidelity entanglement at cryogenic and even ambient temperatures is feasible with realistic parameters and show that the entangled pair can be subsequently leveraged for deterministic controlled-NOT operations between nuclear spins. Our results open the door for novel quantum processing architectures for a wide variety of solid-state spin qubits.

Ground-State Cooling of Levitated Magnets in Low-Frequency Traps

We present a ground-state cooling scheme for the mechanical degrees of freedom of mesoscopic magnetic particles levitated in low-frequency traps. Our method makes use of a binary sensor and suitably shaped pulses to perform weak, adaptive measurements on the position of the magnet. This allows us to precisely determine the position and momentum of the particle, transforming the initial high-entropy thermal state into a pure coherent state. The energy is then extracted by shifting the trap center. By delegating the task of energy extraction to a coherent displacement operation, we overcome the limitations associated with cooling schemes that rely on the dissipation of a two-level system coupled to the oscillator. We numerically benchmark our protocol in realistic experimental conditions, including heating rates and imperfect readout fidelities, showing that it is well suited for magnetogravitational traps operating at cryogenic temperatures. Our results pave the way for ground-state cooling of micron-scale particles.

Mechanical Squeezing via Fast Continuous Measurement

We revisit quantum state preparation of an oscillator by continuous linear position measurement. Quite general analytical expressions are derived for the conditioned state of the oscillator. Remarkably, we predict that quantum squeezing is possible outside of both the backaction dominated and quantum coherent oscillation regimes, relaxing experimental requirements even compared to ground-state cooling. This provides a new way to generate nonclassical states of macroscopic mechanical oscillators, and opens the door to quantum sensing and tests of quantum macroscopicity at room temperature.

Enhanced Energy Transfer to an Optomechanical Piston from Indistinguishable Photons

Thought experiments involving gases and pistons, such as Maxwell's demon and Gibbs' mixing, are central to our understanding of thermodynamics. Here, we present a quantum thermodynamic thought experiment in which the energy transfer from two photonic gases to a piston membrane grows quadratically with the number of photons for indistinguishable gases, while it grows linearly for distinguishable gases. This signature of bosonic bunching may be observed in optomechanical experiments, highlighting the potential of these systems for the realization of thermodynamic thought experiments in the quantum realm.

Motional Sideband Asymmetry of a Nanoparticle Optically Levitated in Free Space

The hallmark of quantum physics is Planck's constant h, whose finite value entails the quantization that gave the theory its name. The finite value of h gives rise to inevitable zero-point fluctuations even at vanishing temperature. The zero-point fluctuation of mechanical motion becomes smaller with growing mass of an object, making it challenging to observe at macroscopic scales. Here, we transition a dielectric particle with a diameter of 136 nm from the classical realm to the regime where its zero-point motion emerges as a sizable contribution to its energy. To this end, we optically trap the particle at ambient temperature in ultrahigh vacuum and apply active feedback cooling to its center-of-mass motion. We measure an asymmetry between the Stokes and anti-Stokes sidebands of photons scattered by the levitated particle, which is a signature of the particle's quantum ground state of motion.

Ultrastrong Parametric Coupling between a Superconducting Cavity and a Mechanical Resonator

We present a new optomechanical device where the motion of a micromechanical membrane couples to a microwave resonance of a three-dimensional superconducting cavity. With this architecture, we realize ultrastrong parametric coupling, where the coupling not only exceeds the dissipation in the system but also rivals the mechanical frequency itself. In this regime, the optomechanical interaction induces a frequency splitting between the hybridized normal modes that reaches 88% of the bare mechanical frequency, limited by the fundamental parametric instability. The coupling also exceeds the mechanical thermal decoherence rate, enabling new applications in ultrafast quantum state transfer and entanglement generation.

State Preparation and Tomography of a Nanomechanical Resonator with Fast Light Pulses

Pulsed optomechanical measurements enable squeezing, nonclassical state creation, and backaction-free sensing. We demonstrate pulsed measurement of a cryogenic nanomechanical resonator with record precision close to the quantum regime. We use these to prepare thermally squeezed and purified conditional mechanical states, and to perform full state tomography. These demonstrations exploit large vacuum optomechanical coupling in a nanophotonic cavity to reach a single-pulse imprecision of 9 times the mechanical zero-point amplitude x_{zpf}. We study the effect of other mechanical modes that limit the conditional state width to 58x_{zpf}, and show how decoherence causes the state to grow in time.

Heat capacities of thermally manipulated mechanical oscillator at strong coupling

Coherent quantum oscillators are basic physical systems both in quantum statistical physics and quantum thermodynamics. Their realizations in lab often involve solid-state devices sensitive to changes in ambient temperature. We represent states of the solid-state optomechanical oscillator with temperature-dependent frequency by equivalent states of the mechanical oscillator with temperature-dependent energy levels. We interpret the temperature dependence as a consequence of strong coupling between the oscillator and the heat bath. We explore parameter regimes corresponding to anomalous behavior of mechanical and thermodynamic characteristics as a consequence of the strong coupling: (i) The localization and the purification induced by heating, and (ii) the negativity of two generalized heat capacities. The capacities can be used to witness non-linearity in the temperature dependency of the energy levels. Our phenomenological experimentally-oriented approach can stimulate development of new optomechanical and thermomechanical experiments exploring basic concepts of strong coupling thermodynamics.

Quantum Hypercube States

We introduce quantum hypercube states, a class of continuous-variable quantum states that are generated as orthographic projections of hypercubes onto the quadrature phase space of a bosonic mode. In addition to their interesting geometry, hypercube states display phase-space features much smaller than Planck's constant, and a large volume of Wigner negativity. We theoretically show that these features make hypercube states sensitive to displacements at extremely small scales in a way that is surprisingly robust to initial thermal occupation and to small separation of the superposed state components. In a high-temperature proof-of-principle optomechanics experiment we observe, and match to theory, the signature outer-edge vertex structure of hypercube states.

Highly efficient cooling of mechanical resonator with square pulse drives

Ground state cooling of mechanical resonator is a way to generate macroscopic quantum states. Here we present a study of optomechanical cooling under the drive of square pulses without smooth profile. By illustrating the dynamical processes of cooling, we show how to choose the amplitudes and durations of square pulses, as well as the intervals between them, so that a mechanical resonator can be quickly cooled down to its ground state. Compared with the cooling under a continuous-wave drive field, the ground state cooling of a mechanical resonator can be performed more efficiently and flexibly by using square pulse drives. At certain times of such cooling process, the thermal phonon number under square pulse drives can become even lower than the theoretical limit for the cooling with a continuous-wave drive field of the same amplitude.

Exploring corrections to the Optomechanical Hamiltonian

We compare two approaches for deriving corrections to the “linear model” of cavity optomechanics, in order to describe effects that are beyond first order in the radiation pressure coupling. In the regime where the mechanical frequency is much lower than the cavity one, we compare: (I) a widely used phenomenological Hamiltonian conserving the photon number; (II) a two-mode truncation of C. K. Law’s microscopic model, which we take as the “true” system Hamiltonian. While these approaches agree at first order, the latter model does not conserve the photon number, resulting in challenging computations. We find that approach (I) allows for several analytical predictions, and significantly outperforms the linear model in our numerical examples. Yet, we also find that the phenomenological Hamiltonian cannot fully capture all high-order corrections arising from the C. K. Law model.

A new bound on polymer quantization via an opto-mechanical setup

The existence of a minimal measurable length as a characteristic length in the Planck scale is one of the main features of quantum gravity and has been widely explored in the context. Various different deformations of spacetime have been employed successfully for the purpose. However, polymer quantization approach is a relatively new and dynamic field towards the quantum gravity phenomenology, which emerges from the symmetric sector of the loop quantum gravity. In this article, we extend the standard ideas of polymer quantization to find a new and tighter bound on the polymer deformation parameter. Our protocol relies on an opto-mechanical experimental setup that was originally proposed to explore some interesting phenomena by embedding the minimal length into the standard canonical commutation relation. We extend this scheme to probe the polymer length deformed canonical commutation relation of the center of mass mode of a mechanical oscillator with a mass around the Planck scale. The method utilizes the novelty of exchanging the relevant mechanical information with a high intensity optical pulse inside an optical cavity. We also demonstrate that our proposal is within the reach of the current technologies and, thus, it could uncover a decent realization of quantum gravitational phenomena thorough a simple table-top experiment.

Enhanced sensing of millicharged particles using nonlinear effects in an optomechanical system

Particles with electric charge 10^-14 e in bulk mass are not excluded by present experiments. In the present letter we provide a feasible scheme to measure the millicharged particles via the optical cavity coupled to a levitated nanosphere. The results show that the optical probe spectrum of the nano-oscillator presents a tiny shift due to the existence of millicharged particles. Compare to the previous experiment the sensitivity can be improved by the using of a specific geometry to generate an electric field gradient and a pump-probe scheme to read the weak frequency shift. Owing to the very narrow linewidth(10^-6 Hz) of the optical Kerr peak on the spectrum, this shift will be more obvious, which makes the millicharges more easy to be detectable. The technique proposed here paves the way for new applications for probing dark matter and nonzero charged neutrino in the condensed matter.

Ground-state cooling of a mechanical oscillator in a hybrid optomechanical system including an atomic ensemble

We investigate dynamical properties and the ground-state cooling of a mechanical oscillator in an optomechanical system coupling with an atomic ensemble. In this hybrid optomechanical system, an atomic ensemble which consists of two-level atoms couples with the cavity field. Here we consider the case where the atomic ensemble is in higher excitation. Studies show that the atom-field coupling strength can obviously influence the cooling process, and we can achieve the ground-state cooling of the mechanical oscillator by choosing the appropriate physical parameters of the system. Our cooling mechanism has potential applications in quantum information processing and procession measurement.

Pulsed quantum continuous-variable optoelectromechanical transducer

We propose a setup allowing to entangle two directly non-interacting radiation modes applying four sequential pulsed quantum resonant interactions with a noisy vibrational mode of a mechanical oscillator which plays the role of the mediator. We analyze Gaussian entanglement of the radiation modes generated by the transducer and confirm that the noisy mechanical mode can mediate generation of entanglement. The entanglement, however, is limited if the interaction gains are not individually optimized. We prove the robustness of the transducer to optical losses and the influence of the mechanical bath and propose the ways to achieve maximal performance through the individual optimization.

Pulsed Entanglement of Two Optomechanical Oscillators and Furry's Hypothesis

A strategy for generating entanglement between two separated optomechanical oscillators is analyzed, using entangled radiation produced from down-conversion and stored in an initiating cavity. We show that the use of pulsed entanglement with optimally shaped temporal modes can efficiently transfer quantum entanglement into a mechanical mode, then remove it after a fixed waiting time for measurement. This protocol could provide new avenues for testing for bounds on decoherence in massive systems that are spatially separated, as originally suggested by Furry not long after the discussion by Einstein-Podolsky-Rosen and Schrödinger of entanglement.

Nonlinear cavity optomechanics with nanomechanical thermal fluctuations

Although the interaction between light and motion in cavity optomechanical systems is inherently nonlinear, experimental demonstrations to date have allowed a linearized description in all except highly driven cases. Here, we demonstrate a nanoscale optomechanical system in which the interaction between light and motion is so large (single-photon cooperativity C0≈103) that thermal motion induces optical frequency fluctuations larger than the intrinsic optical linewidth. The system thereby operates in a fully nonlinear regime, which pronouncedly impacts the optical response, displacement measurement and radiation pressure backaction. Specifically, we measure an apparent optical linewidth that is dominated by thermo-mechanically induced frequency fluctuations over a wide temperature range, and show that in this regime thermal displacement measurements cannot be described by conventional analytical models. We perform a proof-of-concept demonstration of exploiting the nonlinearity to conduct sensitive quadratic readout of nanomechanical displacement. Finally, we explore how backaction in this regime affects the mechanical fluctuation spectra.

Enhancing a slow and weak optomechanical nonlinearity with delayed quantum feedback

A central goal of quantum optics is to generate large interactions between single photons so that one photon can strongly modify the state of another one. In cavity optomechanics, photons interact with the motional degrees of freedom of an optical resonator, for example, by imparting radiation pressure forces on a movable mirror or sensing minute fluctuations in the position of the mirror. Here, we show that the optical nonlinearity arising from these effects, typically too small to operate on single photons, can be sufficiently enhanced with feedback to generate large interactions between single photons. We propose a protocol that allows photons propagating in a waveguide to interact with each other through multiple bounces off an optomechanical system. The protocol is analysed by evolving the full many-body quantum state of the waveguide-coupled system, illustrating that large photon-photon interactions mediated by mechanical motion may be within experimental reach.

Steady-state mechanical squeezing in a double-cavity optomechanical system

We study the physical properties of double-cavity optomechanical system in which the mechanical resonator interacts with one of the coupled cavities and another cavity is used as an auxiliary cavity. The model can be expected to achieve the strong optomechanical coupling strength and overcome the optomechanical cavity decay, simultaneously. Through the coherent auxiliary cavity interferences, the steady-state squeezing of mechanical resonator can be generated in highly unresolved sideband regime. The validity of the scheme is assessed by numerical simulation and theoretical analysis of the steady-state variance of the mechanical displacement quadrature. The scheme provides a platform for the mechanical squeezing beyond the resolved sideband limit and solves the restricted experimental bounds at present.

Measurement-Induced Macroscopic Superposition States in Cavity Optomechanics

A novel protocol for generating quantum superpositions of macroscopically distinct states of a bulk mechanical oscillator is proposed, compatible with existing optomechanical devices operating in the bad-cavity limit. By combining a pulsed optomechanical quantum nondemolition (QND) interaction with nonclassical optical resources and measurement-induced feedback, the need for strong single-photon coupling is avoided. We outline a three-pulse sequence of QND interactions encompassing squeezing-enhanced cooling by measurement, state preparation, and tomography.

Dissipative Optomechanical Preparation of Macroscopic Quantum Superposition States

The transition from quantum to classical physics remains an intensely debated question even though it has been investigated for more than a century. Further clarifications could be obtained by preparing macroscopic objects in spatial quantum superpositions and proposals for generating such states for nanomechanical devices either in a transient or a probabilistic fashion have been put forward. Here, we introduce a method to deterministically obtain spatial superpositions of arbitrary lifetime via dissipative state preparation. In our approach, we engineer a double-well potential for the motion of the mechanical element and drive it towards the ground state, which shows the desired spatial superposition, via optomechanical sideband cooling. We propose a specific implementation based on a superconducting circuit coupled to the mechanical motion of a lithium-decorated monolayer graphene sheet, introduce a method to verify the mechanical state by coupling it to a superconducting qubit, and discuss its prospects for testing collapse models for the quantum to classical transition.

Nonlinear optomechanical measurement of mechanical motion

Precision measurement of nonlinear observables is an important goal in all facets of quantum optics. This allows measurement-based non-classical state preparation, which has been applied to great success in various physical systems, and provides a route for quantum information processing with otherwise linear interactions. In cavity optomechanics much progress has been made using linear interactions and measurement, but observation of nonlinear mechanical degrees-of-freedom remains outstanding. Here we report the observation of displacement-squared thermal motion of a micro-mechanical resonator by exploiting the intrinsic nonlinearity of the radiation-pressure interaction. Using this measurement we generate bimodal mechanical states of motion with separations and feature sizes well below 100 pm. Future improvements to this approach will allow the preparation of quantum superposition states, which can be used to experimentally explore collapse models of the wavefunction and the potential for mechanical-resonator-based quantum information and metrology applications.

The measurement of non-linear mechanical degrees-of-freedom provides a pathway to explore quantum behaviour at macroscopic scales. Here, Brawley et al. report the observation of displacement-squared thermal motion of a micro-mechanical resonator by exploiting the intrinsic non-linearity of the radiation-pressure interaction.

Conditional cooling limit for a quantum channel going through an incoherent environment

We propose and experimentally verify a cooling limit for a quantum channel going through an incoherent environment. The environment consists of a large number of independent non-interacting and non-interfering elementary quantum systems – qubits. The qubits travelling through the channel can only be randomly replaced by environmental qubits. We investigate a conditional cooling limit that exploits an additional probing output. The limit specifies when the single-qubit channel is quantum, i.e. it preserves entanglement. It is a fundamental condition for entanglement-based quantum technology.

Strong optomechanical interactions in a sliced photonic crystal nanobeam

Coupling between mechanical and optical degrees of freedom is strongly enhanced by using subwavelength optical mode profiles. We realize an optomechanical system based on a sliced photonic crystal nanobeam, which combines such highly confined optical fields with a low-mass mechanical mode. Analyzing the transduction of motion and effects of radiation pressure we find the system exhibits a photon-phonon coupling rate g0 /2π ≈ 11.5 MHz, exceeding previously reported values by an order of magnitude. We show that the large optomechanical interaction enables detecting thermal motion with detection noise below that at the standard quantum limit, even in broad bandwidth devices, important for both sensor applications as well as measurement-based quantum control.

Qubit-Programmable Operations on Quantum Light Fields

Engineering quantum operations is a crucial capability needed for developing quantum technologies and designing new fundamental physics tests. Here we propose a scheme for realising a controlled operation acting on a travelling continuous-variable quantum field, whose functioning is determined by a discrete input qubit. This opens a new avenue for exploiting advantages of both information encoding approaches. Furthermore, this approach allows for the program itself to be in a superposition of operations, and as a result it can be used within a quantum processor, where coherences must be maintained. Our study can find interest not only in general quantum state engineering and information protocols, but also details an interface between different physical platforms. Potential applications can be found in linking optical qubits to optical systems for which coupling is best described in terms of their continuous variables, such as optomechanical devices.

Optomechanical entanglement under pulse drive

We report a study of optomechanical entanglement under the drive of one or a series of laser pulses with arbitrary detuning and different pulse shapes. Because of the non-existence of system steady state under pulsed driving field, we adopt a different approach from the standard treatment to optomechanical entanglement. The situation of the entanglement evolution in high temperature is also discussed.

Efficient Scheme for Perfect Collective Einstein-Podolsky-Rosen Steering

A practical scheme for the demonstration of perfect one-sided device-independent quantum secret sharing is proposed. The scheme involves a three-mode optomechanical system in which a pair of independent cavity modes is driven by short laser pulses and interact with a movable mirror. We demonstrate that by tuning the laser frequency to the blue (anti-Stokes) sideband of the average frequency of the cavity modes, the modes become mutually coherent and then may collectively steer the mirror mode to a perfect Einstein-Podolsky-Rosen state. The scheme is shown to be experimentally feasible, it is robust against the frequency difference between the modes, mechanical thermal noise and damping, and coupling strengths of the cavity modes to the mirror.

Cavity ring-up spectroscopy for ultrafast sensing with optical microresonators

Spectroscopy of whispering-gallery mode microresonators has become a powerful scientific tool, enabling the detection of single viruses, nanoparticles and even single molecules. Yet the demonstrated timescale of these schemes has been limited so far to milliseconds or more. Here we introduce a scheme that is orders of magnitude faster, capable of capturing complete spectral snapshots at nanosecond timescales—cavity ring-up spectroscopy. Based on sharply rising detuned probe pulses, cavity ring-up spectroscopy combines the sensitivity of heterodyne measurements with the highest-possible, transform-limited acquisition rate. As a demonstration, we capture spectra of microtoroid resonators at time intervals as short as 16 ns, directly monitoring submicrosecond dynamics of their optomechanical vibrations, thermorefractive response and Kerr nonlinearity. Cavity ring-up spectroscopy holds promise for the study of fast biological processes such as enzyme kinetics, protein folding and light harvesting, with applications in other fields such as cavity quantum electrodynamics and pulsed optomechanics.

Whispering-gallery mode microresonators are powerful sensing tools, but spectrum acquisition has taken milliseconds or longer. Here, Rosenblum et al. introduce cavity ring-up spectroscopy, in which sharply rising detuned probe pulses capture spectra of microresonators on nanosecond timescales.

Testing spontaneous wave-function collapse models on classical mechanical oscillators

We show that the heating effect of spontaneous wave-function collapse models implies an experimentally significant increment ΔT(sp) of equilibrium temperature in a mechanical oscillator. The obtained new form ΔT(sp) is linear in the oscillator's relaxation time τ and independent of the mass. The oscillator can be in a classical thermal state, also the effect ΔT(sp) is classical for a wide range of frequencies and quality factors. We note that the test of ΔT(sp) does not necessitate quantum state monitoring just tomography. In both the gravity-related and the continuous spontaneous localization models the strong-effect edge of their parameter range can be challenged in existing experiments on classical oscillators. For the continuous spontaneous localization theory, the conjectured highest collapse rate parameter values become immediately constrained by evidences from current experiments on extreme slow-ring-down oscillators.

Work extraction from heat-powered quantized optomechanical setups

We analyze work extraction from an autonomous (self-contained) heat-powered optomechanical setup. The initial state of the quantized mechanical oscillator plays a key role. As the initial mean amplitude of the oscillator decreases, the resulting efficiency increases. In contrast to laser-powered self-induced oscillations, work extraction from a broadband heat bath does not require coherence or phase-locking: an initial phase-averaged coherent state of the oscillator still yields work, as opposed to an initial Fock-state.

Harnessing vacuum forces for quantum sensing of graphene motion

Position measurements at the quantum level are vital for many applications but also challenging. Typically, methods based on optical phase shifts are used, but these methods are often weak and difficult to apply to many materials. An important example is graphene, which is an excellent mechanical resonator due to its small mass and an outstanding platform for nanotechnologies, but it is largely transparent. Here, we present a novel detection scheme based upon the strong, dispersive vacuum interactions between a graphene sheet and a quantum emitter. In particular, the mechanical displacement causes strong changes in the vacuum-induced shifts of the transition frequency of the emitter, which can be read out via optical fields. We show that this enables strong quantum squeezing of the graphene position on time scales that are short compared to the mechanical period.

Optomechanical interface for probing matter-wave coherence

We combine matter-wave interferometry and cavity optomechanics to propose a coherent matter–light interface based on mechanical motion at the quantum level. We demonstrate a mechanism that is able to transfer non-classical features imprinted on the state of a matter-wave system to an optomechanical device, transducing them into distinctive interference fringes. This provides a reliable tool for the inference of quantum coherence in the particle beam. Moreover, we discuss how our system allows for intriguing perspectives, paving the way to the construction of a device for the encoding of quantum information in matter-wave systems. Our proposal, which highlights previously unforeseen possibilities for the synergistic exploitation of these two experimental platforms, is explicitly based on existing technology, available and widely used in current cutting-edge experiments.

Matter-wave interferometry of a levitated thermal nano-oscillator induced and probed by a spin

We show how the interference between spatially separated states of the center of mass (c.m.) of a mesoscopic harmonic oscillator can be evidenced by coupling it to a spin and performing solely spin manipulations and measurements (Ramsey interferometry). We propose to use an optically levitated diamond bead containing a nitrogen-vacancy center spin. The nanoscale size of the bead makes the motional decoherence due to levitation negligible. The form of the spin-motion coupling ensures that the scheme works for thermal states so that moderate feedback cooling suffices. No separate control or observation of the c.m. state is required and thereby one dispenses with cavities, spatially resolved detection, and low-mass-dispersion ensembles. The controllable relative phase in the Ramsey interferometry stems from a gravitational potential difference so that it uniquely evidences coherence between states which involve the whole nanocrystal being in spatially distinct locations.

Robust photon entanglement via quantum interference in optomechanical interfaces

Entanglement is a key element in quantum information processing. Here, we present schemes to generate robust photon entanglement via optomechanical quantum interfaces in the strong coupling regime. The schemes explore the excitation of the Bogoliubov dark mode and the destructive quantum interference between the bright modes of the interface, similar to electromagnetically induced transparency, to eliminate leading-order effects of the mechanical noise. Both continuous-variable and discrete-state entanglements that are robust against the mechanical noise can be achieved. The schemes can be used to generate entanglement in hybrid quantum systems between, e.g., microwave photon and optical photon.

Strong thermomechanical squeezing via weak measurement

We experimentally surpass the 3 dB limit to steady-state parametric squeezing of a mechanical oscillator. The localization of an atomic force microscope cantilever, achieved by optimal estimation, is enhanced by up to 6.2 dB in one position quadrature when a detuned parametric drive is used. This squeezing is, in principle, limited only by the oscillator Q factor. Used on low temperature, high frequency oscillators, this technique provides a pathway to achieve robust quantum squeezing below the zero-point motion. Broadly, our results demonstrate that control systems engineering can overcome well established limits in applications of nonlinear processes. Conversely, by localizing the mechanical position to better than the measurement precision of our apparatus, they demonstrate the usefulness of mechanical nonlinearities in control applications.

Dynamic dissipative cooling of a mechanical resonator in strong coupling optomechanics

Cooling of mesoscopic mechanical resonators represents a primary concern in cavity optomechanics. In this Letter, in the strong optomechanical coupling regime, we propose to dynamically control the cavity dissipation, which is able to significantly accelerate the cooling process while strongly suppressing the heating noise. Furthermore, the dynamic control is capable of overcoming quantum backaction and reducing the cooling limit by several orders of magnitude. The dynamic dissipation control provides new insights for tailoring the optomechanical interaction and offers the prospect of exploring mesoscopic quantum physics.

Optomechanical superpositions via nested interferometry

We present a scheme for achieving macroscopic quantum superpositions in optomechanical systems by using single photon postselection and detecting them with nested interferometers. This method relieves many of the challenges associated with previous optical schemes for measuring macroscopic superpositions and only requires the devices to be in the weak coupling regime. It requires only small improvements on currently achievable device parameters and allows the observation of decoherence on a time scale unconstrained by the system's optical decay time. Prospects for observing novel decoherence mechanisms are discussed.

Macroscopic tunneling of a membrane in an optomechanical double-well potential

The macroscopic tunneling of an optomechanical membrane is considered. A cavity mode which couples quadratically to the membranes position can create highly tunable adiabatic double-well potentials, which together with the high Q factors of such membranes render the observation of macroscopic tunneling possible. A suitable, pulsed measurement scheme using a linearly coupled mode of the cavity for the verification of the effect is studied.