Inherent stochasticity during insulator-metal transition in VO2

Engineering of Active and Passive Loss in High-Quality-Factor Vanadium Dioxide-Based BIC Metasurfaces

Active functionalities of metasurfaces are of growing interest in nanophotonics. The main strategy employed to date is spectral resonance tuning affecting predominantly the far-field response. However, this barely influences other essential resonance properties like near-field enhancement, signal modulation, quality factor, and absorbance, which are all vital for numerous applications. Here we introduce an active metasurface approach that combines temperature-tunable losses in vanadium dioxide with far-field coupling tunable symmetry-protected bound states in the continuum. This method enables exceptional precision in independently controlling both radiative and nonradiative losses. Consequently, it allows for the adjustment of both the far-field response and, notably, the near-field characteristics like local field enhancement and absorbance. We experimentally demonstrate continuous tuning from under- through critical- to overcoupling, achieving quality factors of 200 and a relative switching contrast of 78%. Our research marks a significant step toward highly tunable metasurfaces, controlling both near- and far-field properties.

Origin of discrete resistive switching in chemically heterogeneous vanadium oxide crystals

Phase changes in oxide materials such as VO2 offer a foundational platform for designing novel solid-state devices. Tuning the V : O stoichiometry offers a vast electronic phase space with non-trivial collective properties. Here, we report the observation of discrete threshold switching voltages (Vth) with constant ΔVth between cycles in vanadium oxide crystals. The observed threshold fields over 10 000 cycles are ∼100× lower than that noted for stoichiometric VO2 and show unique discrete behaviour with constant ΔVth. We correlate the observed discrete memristor behaviour with the valence change mechanism and fluctuations in the chemical composition of spatially distributed VO2-VnO2n-1 complex oxide phases that can synergistically co-operate with the insulator-metal transition resulting in sharp current jumps. The design of chemical heterogeneity in oxide crystals, therefore, offers an intriguing path to realizing low-energy neuromorphic devices.

Local strain inhomogeneities during electrical triggering of a metal-insulator transition revealed by X-ray microscopy

Electrical triggering of a metal-insulator transition (MIT) often results in the formation of characteristic spatial patterns such as a metallic filament percolating through an insulating matrix or an insulating barrier splitting a conducting matrix. When MIT triggering is driven by electrothermal effects, the temperature of the filament or barrier can be substantially higher than the rest of the material. Using X-ray microdiffraction and dark-field X-ray microscopy, we show that electrothermal MIT triggering leads to the development of an inhomogeneous strain profile across the switching device, even when the material does not undergo a pronounced, discontinuous structural transition coinciding with the MIT. Diffraction measurements further reveal evidence of unique features associated with MIT triggering including lattice distortions, tilting, and twinning, which indicate structural nonuniformity of both low- and high-resistance regions inside the switching device. Such lattice deformations do not occur under equilibrium, zero-voltage conditions, highlighting the qualitative difference between states achieved through increasing temperature and applying voltage in nonlinear electrothermal materials. Electrically induced strain, lattice distortions, and twinning could have important contributions in the MIT triggering process and drive the material into nonequilibrium states, providing an unconventional pathway to explore the phase space in strongly correlated electronic systems.

Biorealistic Neuronal Temperature-Sensitive Dynamics within Threshold Switching Memristors: Toward Neuromorphic Thermosensation

Neuromorphic nanoelectronic devices that can emulate the temperature-sensitive dynamics of biological neurons are of great interest for bioinspired robotics and advanced applications such as in silico neuroscience. In this work, we demonstrate the biomimetic thermosensitive properties of two-terminal V3O5 memristive devices and showcase their similarity to the firing characteristics of thermosensitive biological neurons. The temperature-dependent electrical characteristics of V3O5-based memristors are used to understand the spiking response of a simple relaxation oscillator. The temperature-dependent dynamics of these oscillators are then compared with those of biological neurons through numerical simulations of a conductance-based neuron model, the Morris-Lecar neuron model. Finally, we demonstrate a robust neuromorphic thermosensation system inspired by biological thermoreceptors for bioinspired thermal perception and representation. These results not only demonstrate the biorealistic emulative potential of threshold-switching memristors but also establish V3O5 as a functional material for realizing solid-state neurons for neuromorphic computing and sensing applications.

In-Operando Spatiotemporal Imaging of Coupled Film-Substrate Elastodynamics During an Insulator-to-Metal Transition

The drive toward non-von Neumann device architectures has led to an intense focus on insulator-to-metal (IMT) and the converse metal-to-insulator (MIT) transitions. Studies of electric field-driven IMT in the prototypical VO2 thin-film channel devices are largely focused on the electrical and elastic responses of the films, but the response of the corresponding TiO2 substrate is often overlooked, since it is nominally expected to be electrically passive and elastically rigid. Here, in-operando spatiotemporal imaging of the coupled elastodynamics using X-ray diffraction microscopy of a VO2 film channel device on TiO2 substrate reveals two new surprises. First, the film channel bulges during the IMT, the opposite of the expected shrinking in the film undergoing IMT. Second, a microns thick proximal layer in the substrate also coherently bulges accompanying the IMT in the film, which is completely unexpected. Phase-field simulations of coupled IMT, oxygen vacancy electronic dynamics, and electronic carrier diffusion incorporating thermal and strain effects suggest that the observed elastodynamics can be explained by the known naturally occurring oxygen vacancies that rapidly ionize (and deionize) in concert with the IMT (MIT). Fast electrical-triggering of the IMT via ionizing defects and an active "IMT-like" substrate layer are critical aspects to consider in device applications.

Tuning the Intrinsic Stochasticity of Resistive Switching in VO2 Microresistors

Vanadium dioxide (VO2) microresistors exhibit resistive switching above a certain threshold voltage, allowing them to emulate neurons in neuromorphic systems. However, such devices present intrinsic cycle-to-cycle variations in their resistances and threshold voltages, which can be detrimental or beneficial, depending on their use. Here, we study this stochasticity in VO2 microresistors with various grain sizes and dimensions, through high-resolution electrical and optical measurements across numerous cycles. Our results highlight that the cycle-to-cycle variations in threshold voltage increase as the grain size becomes comparable to the device dimensions. We also present observations of multimodal threshold voltage distributions in the smaller-length resistors. To understand the underlying phenomenon, we investigate the relationship between the device insulating resistance and threshold voltage distributions, showing that these modes could correspond to distinct percolation paths and filaments. Our findings provide the first experimentally verified guidelines for designing VO2 devices with minimized/maximized stochasticity, depending on the targeted application.

Piezo strain-controlled phase transition in single-crystalline Mott switches for threshold-manipulated leaky integrate-and-fire neurons

Electrical manipulation of the metal-insulator transition (MIT) in quantum materials has attracted considerable attention toward the development of ultracompact neuromorphic devices because of their stimuli-triggered transformations. VO2 is expected to undergo abrupt electronic phase transition by piezo strain near room temperature; however, the unrestricted integration of defect-free VO2 films on piezoelectric substrates is required to fully exploit this emerging phenomenon in oxide heterostructures. Here, we demonstrate the integration of single-crystalline VO2 films on highly lattice-mismatched PMN-PT piezoelectric substrates using a single-crystal TiO2-nanomembrane (NM) template. Using our strategy on heterogeneous integration, single-crystal-like steep transition was observed in the defect-free VO2 films on TiO2-NM-PMN-PT. Unprecedented TMI modulation (5.2 kelvin) and isothermal resistance of VO2 [ΔR/R (Eg) ≈ 18,000% at 315 kelvin] were achieved by the efficient strain transfer-induced MIT, which cannot be achieved using directly grown VO2/PMN-PT substrates. Our results provide a fundamental strategy to realize a single-crystalline artificial heterojunction for promoting the application of artificial neurons using emergent materials.

One-step rolling fabrication of VO2 tubular bolometers with polarization-sensitive and omnidirectional detection

Uncooled infrared detection based on vanadium dioxide (VO2) radiometer is highly demanded in temperature monitoring and security protection. The key to its breakthrough is to fabricate bolometer arrays with great absorbance and excellent thermal insulation using a straightforward procedure. Here, we show a tubular bolometer by one-step rolling VO2 nanomembranes with enhanced infrared detection. The tubular geometry enhances the thermal insulation, light absorption, and temperature sensitivity of freestanding VO2 nanomembranes. This tubular VO2 bolometer exhibits a detectivity of ~2 × 108 cm Hz1/2 W-1 in the ultrabroad infrared spectrum, a response time of ~2.0 ms, and a calculated noise-equivalent temperature difference of 64.5 mK. Furthermore, our device presents a workable structural paradigm for polarization-sensitive and omnidirectional light coupling bolometers. The demonstrated overall characteristics suggest that tubular bolometers have the potential to narrow performance and cost gap between photon detectors and thermal detectors with low cost and broad applications.

Complex Oxides for Brain-Inspired Computing: A Review

The fields of brain-inspired computing, robotics, and, more broadly, artificial intelligence (AI) seek to implement knowledge gleaned from the natural world into human-designed electronics and machines. In this review, the opportunities presented by complex oxides, a class of electronic ceramic materials whose properties can be elegantly tuned by doping, electron interactions, and a variety of external stimuli near room temperature, are discussed. The review begins with a discussion of natural intelligence at the elementary level in the nervous system, followed by collective intelligence and learning at the animal colony level mediated by social interactions. An important aspect highlighted is the vast spatial and temporal scales involved in learning and memory. The focus then turns to collective phenomena, such as metal-to-insulator transitions (MITs), ferroelectricity, and related examples, to highlight recent demonstrations of artificial neurons, synapses, and circuits and their learning. First-principles theoretical treatments of the electronic structure, and in situ synchrotron spectroscopy of operating devices are then discussed. The implementation of the experimental characteristics into neural networks and algorithm design is then revewed. Finally, outstanding materials challenges that require a microscopic understanding of the physical mechanisms, which will be essential for advancing the frontiers of neuromorphic computing, are highlighted.