Enhanced levels of lambda Red-mediated recombinants in mismatch repair mutants

Dysregulated DnaB unwinding induces replisome decoupling and daughter strand gaps that are countered by RecA polymerization

The replicative helicase, DnaB, is a central component of the replisome and unwinds duplex DNA coupled with immediate template-dependent DNA synthesis by the polymerase, Pol III. The rate of helicase unwinding is dynamically regulated through structural transitions in the DnaB hexamer between dilated and constricted states. Site-specific mutations in DnaB enforce a faster more constricted conformation that dysregulates unwinding dynamics, causing replisome decoupling that generates excess ssDNA and induces severe cellular stress. This surplus ssDNA can stimulate RecA recruitment to initiate recombinational repair, restart, or activation of the transcriptional SOS response. To better understand the consequences of dysregulated unwinding, we combined targeted genomic dnaB mutations with an inducible RecA filament inhibition strategy to examine the dependencies on RecA in mitigating replisome decoupling phenotypes. Without RecA filamentation, dnaB:mut strains had reduced growth rates, decreased mutagenesis, but a greater burden from endogenous damage. Interestingly, disruption of RecA filamentation in these dnaB:mut strains also reduced cellular filamentation but increased markers of double strand breaks and ssDNA gaps as detected by in situ fluorescence microscopy and FACS assays, TUNEL and PLUG, respectively. Overall, RecA plays a critical role in strain survival by protecting and processing ssDNA gaps caused by dysregulated helicase activity in vivo.

Mono- and Biallelic Replication-Coupled Gene Editing Discriminates Dominant-Negative and Loss-of-Function Variants of DNA Mismatch Repair Genes

Replication-coupled gene editing using locked nucleic acid-modified single-stranded DNA oligonucleotides (LMOs) can genetically engineer mammalian cells with high precision at single nucleotide resolution. Based on this method, oligonucleotide-directed mutation screening (ODMS) was developed to determine whether variants of uncertain clinical significance of DNA mismatch repair (MMR) genes can cause Lynch syndrome. In ODMS, the appearance of 6-thioguanine-resistant colonies upon introduction of the variant is indicative for defective MMR and hence pathogenicity. Whereas mouse embryonic stem cells (mESCs) hemizygous for MMR genes were used previously, we now show that ODMS can also be applied in wild-type mESCs carrying two functional alleles of each MMR gene. 6-Thioguanine resistance can result from two possible events: first, the mutation is present in only one allele, which is indicative for dominant-negative activity of the variant; and second, both alleles contain the planned modification, which is indicative for a regular loss-of-function variant. Thus, ODMS in wild-type mESCs can discriminate fully disruptive and dominant-negative MMR variants. The feasibility of biallelic targeting suggests that the efficiency of LMO-mediated gene targeting at a nonselectable locus may be enriched in cells that had undergone a simultaneous selectable LMO targeting event. This turned out to be the case and provided a protocol to improve recovery of LMO-mediated gene modification events.

Enhanced eMAGE applied to identify genetic factors of nuclear hormone receptor dysfunction via combinatorial gene editing

Technologies that generate precise combinatorial genome modifications are well suited to dissect the polygenic basis of complex phenotypes and engineer synthetic genomes. Genome modifications with engineered nucleases can lead to undesirable repair outcomes through imprecise homology-directed repair, requiring non-cleavable gene editing strategies. Eukaryotic multiplex genome engineering (eMAGE) generates precise combinatorial genome modifications in Saccharomyces cerevisiae without generating DNA breaks or using engineered nucleases. Here, we systematically optimize eMAGE to achieve 90% editing frequency, reduce workflow time, and extend editing distance to 20 kb. We further engineer an inducible dominant negative mismatch repair system, allowing for high-efficiency editing via eMAGE while suppressing the elevated background mutation rate 17-fold resulting from mismatch repair inactivation. We apply these advances to construct a library of cancer-associated mutations in the ligand-binding domains of human estrogen receptor alpha and progesterone receptor to understand their impact on ligand-independent autoactivation. We validate that this yeast model captures autoactivation mutations characterized in human breast cancer models and further leads to the discovery of several previously uncharacterized autoactivating mutations. This work demonstrates the development and optimization of a cleavage-free method of genome editing well suited for applications requiring efficient multiplex editing with minimal background mutations.

Increasing the efficiency of gene editing with CRISPR-Cas9 via concurrent expression of the Beta protein

Escherichia coli has emerged as an important host for the production of biopharmaceuticals or other industrially relevant molecules. An efficient gene editing tool is indispensable for ensuring high production levels and optimal release of target products. However, in Escherichia coli, the CRISPR-Cas9 system has been shown to achieve gene modifications with relatively low frequency. Large-scale PCR screening is required, hindering the identification of positive clones. The beta protein, which weakly binds to single-stranded DNA but tightly associates with complementary strand annealing products, offers a promising solution to this issue. In the present study, we describe a targeted and continuous gene editing strategy for the Escherichia coli genome. This strategy involves the coexpression of the beta protein alongside the CRISPR-Cas9 system, enabling a variety of genome modifications such as gene deletion and insertion with an efficiency exceeding 80 %. The integrity of beta proteins is essential for the CRISPR-Cas9/Beta-based gene editing system. In this work, the deletion of either the N- or C-terminal domain significantly impaired system efficiency. Overall, our findings established the CRISPR-Cas9/Beta system as a suitable gene editing tool for various applications in Escherichia coli.

The Influence of Homologous Arm Length on Homologous Recombination Gene Editing Efficiency Mediated by SSB/CRISPR-Cas9 in Escherichia coli

The precise editing of genes mediated by CRISPR-Cas9 necessitates the application of donor DNA with appropriate lengths of homologous arms and fragment sizes. Our previous development, SSB/CRISPR-Cas9, has demonstrated high efficiency in homologous recombination and non-homologous end joining gene editing within bacteria. In this study, we optimized the lengths and sizes of homologous arms of the donor DNA within this system. Two sets of donor DNA constructs were generated: one set comprised donors with only 10-100 bp homologous arms, while the other set included donors with homologous arms ranging from 10-100 bp, between which was a tetracycline resistance expression cassette (1439 bp). These donor constructs were transformed into Escherichia coli MG1655 cells alongside pCas-SSB/pTargetF-lacZ. Notably, when the homologous arms ranged from 10 to 70 bp, the transformation efficiency of non-selectable donors was significantly higher than that of selectable donors. However, within the range of 10-100 bp homologous arm lengths, the homologous recombination rate of selectable donors was significantly higher than that of non-selectable donors, with the gap narrowing as the homologous arm length increased. For selectable donor DNA with homologous arm lengths of 10-60 bp, the homologous recombination rate increased linearly, reaching a plateau when the homologous arm length was between 60-100 bp. Conversely, for non-selectable donor DNA, the homologous recombination rate increased linearly with homologous arm lengths of 10-90 bp, plateauing at 90-100 bp. Editing two loci simultaneously with 100 bp homologous arms, whether selectable or non-selectable, showed no difference in transformation or homologous recombination rates. Editing three loci simultaneously with 100 bp non-selectable homologous arms resulted in a 45% homologous recombination rate. These results suggest that efficient homologous recombination gene editing mediated by SSB/CRISPR-Cas9 can be achieved using donor DNA with 90-100 bp non-selectable homologous arms or 60-100 bp selectable homologous arms.

Genome editing outcomes reveal mycobacterial NucS participates in a short-patch repair of DNA mismatches

In the canonical DNA mismatch repair (MMR) mechanism in bacteria, if a nucleotide is incorrectly mis-paired with the template strand during replication, the resulting repair of this mis-pair can result in the degradation and re-synthesis of hundreds or thousands of nucleotides on the newly-replicated strand (long-patch repair). While mycobacteria, which include important pathogens such as Mycobacterium tuberculosis, lack the otherwise highly-conserved enzymes required for the canonical MMR reaction, it was found that disruption of a mycobacterial mismatch-sensitive endonuclease NucS results in a hyper-mutative phenotype, leading to the idea that NucS might be involved in a cryptic, independently-evolved DNA MMR mechanism, perhaps mediated by homologous recombination (HR) with a sister chromatid. Using oligonucleotide recombination, which allows us to introduce mismatches specifically into the genomes of a model for M. tuberculosis, Mycobacterium smegmatis, we find that NucS participates in a direct repair of DNA mismatches where the patch of excised nucleotides is largely confined to within ∼5-6 bp of the mis-paired nucleotides, which is inconsistent with mechanistic models of canonical mycobacterial HR or other double-strand break (DSB) repair reactions. The results presented provide evidence of a novel NucS-associated mycobacterial MMR mechanism occurring in vivo to regulate genetic mutations in mycobacteria.

Proteins à la carte: riboproteogenomic exploration of bacterial N-terminal proteoform expression

In recent years, it has become evident that the true complexity of bacterial proteomes remains underestimated. Gene annotation tools are known to propagate biases and overlook certain classes of truly expressed proteins, particularly proteoforms-protein isoforms arising from a single gene. Recent (re-)annotation efforts heavily rely on ribosome profiling by providing a direct readout of translation to fully describe bacterial proteomes. In this study, we employ a robust riboproteogenomic pipeline to conduct a systematic census of expressed N-terminal proteoform pairs, representing two isoforms encoded by a single gene raised by annotated and alternative translation initiation, in Salmonella. Intriguingly, conditional-dependent changes in relative utilization of annotated and alternative translation initiation sites (TIS) were observed in several cases. This suggests that TIS selection is subject to regulatory control, adding yet another layer of complexity to our understanding of bacterial proteomes.

IMPORTANCE

With the emerging theme of genes within genes comprising the existence of alternative open reading frames (ORFs) generated by translation initiation at in-frame start codons, mechanisms that control the relative utilization of annotated and alternative TIS need to be unraveled and our molecular understanding of resulting proteoforms broadened. Utilizing complementary ribosome profiling strategies to map ORF boundaries, we uncovered dual-encoding ORFs generated by in-frame TIS usage in Salmonella. Besides demonstrating that alternative TIS usage may generate proteoforms with different characteristics, such as differential localization and specialized function, quantitative aspects of conditional retapamulin-assisted ribosome profiling (Ribo-RET) translation initiation maps offer unprecedented insights into the relative utilization of annotated and alternative TIS, enabling the exploration of gene regulatory mechanisms that control TIS usage and, consequently, the translation of N-terminal proteoform pairs.

Employing synthetic biology to expand antibiotic discovery

Antimicrobial-resistant (AMR) bacterial pathogens are a continually growing threat as our methods for combating these infections continue to be overcome by the evolution of resistance mechanisms. Recent therapeutic methods have not staved off the concern of AMR infections, so continued research focuses on new ways of identifying small molecules to treat AMR pathogens. While chemical modification of existing antibiotics is possible, there has been rapid development of resistance by pathogens that were initially susceptible to these compounds. Synthetic biology is becoming a key strategy in trying to predict and induce novel, natural antibiotics. Advances in cloning and mutagenesis techniques applied through a synthetic biology lens can help characterize the native regulation of antibiotic biosynthetic gene clusters (BGCs) to identify potential modifications leading to more potent antibiotic activity. Additionally, many cryptic antibiotic BGCs are derived from non-ribosomal peptide synthase (NRPS) and polyketide synthase (PKS) biosynthetic pathways; complex, clustered genetic sequences that give rise to amino acid-derived natural products. Synthetic biology can be applied to modify and metabolically engineer these enzyme-based systems to promote rapid and sustainable production of natural products and their variants. This review will focus on recent advances related to synthetic biology as applied to genetic pathway characterization and identification of antibiotics from naturally occurring BGCs. Specifically, we will summarize recent efforts to characterize BGCs via general genomic mutagenesis, endogenous gene expression, and heterologous gene expression.

Glycogen plays a key role in survival of Salmonella Typhimurium on dry surfaces and in low-moisture foods

Salmonella enterica is known to survive in desiccate environments and is often associated with low-moisture foods (LMFs). In this work, S. Typhimurium ATCC 14028 was found to survive better by achieving the least reductions (3.17 ± 0.20 Log CFU reduction) compared to S. Tennessee ATCC 10722 (3.82 ± 0.13 Log CFU reduction) and S. Newport ATCC 6962 (6.03 ± 0.36 Log CFU reduction) after 30 days on surfaces with a relative humidity of 49% at ambient temperature. A metabolomic analysis revealed that S. Typhimurium was still active in energy metabolism after 24 h in the desiccate environment and glycogen, an energy reserve, was drastically reduced. We followed up on the glycogen levels over 30 days and found indeed a sharp decline on the first day. However, the glycogens detected on day 7 were significantly higher (P < 0.05) and thereafter remained stable above the original levels until day 30. The expression levels of both glycogen anabolism- and catabolism-related genes (csrA, glgA, glgC, glgX) were significantly up-regulated at all tested points (P < 0.05). The glgA and glgC insertion mutants displayed weaker survivability on both dry surfaces and in representative LMFs (flour and milk powder) compared to the wild-type strain. This work highlights the role of glycogen during different periods of desiccation, which may bring novel insight into mitigating Salmonella by disrupting glycogen metabolism.

Genome Editing Outcomes Reveal Mycobacterial NucS Participates in a Short-Patch Repair of DNA Mismatches

In the canonical DNA mismatch repair (MMR) mechanism in bacteria, if during replication a nucleotide is incorrectly mis-paired with the template strand, the resulting repair of this mis-pair can result in the degradation and re-synthesis of hundreds or thousands of nucleotides on the newly-replicated strand (long-patch repair). While mycobacteria, which include important pathogens such as Mycobacterium tuberculosis, lack the otherwise highly-conserved enzymes required for the canonical MMR reaction, it was found that disruption of a mycobacterial mismatch-sensitive endonuclease NucS results in a hyper-mutative phenotype, which has led to the idea that NucS might be involved in a cryptic, independently-evolved DNA MMR mechanism. It has been proposed that nuclease activity at a mismatch might result in correction by homologous recombination (HR) with a sister chromatid. Using oligonucleotide recombination, which allows us to introduce mismatches during replication specifically into the genomes of a model for M. tuberculosis, Mycobacterium smegmatis, we find that NucS participates in a direct repair of DNA mismatches where the patch of excised nucleotides is largely confined to within ~5 - 6 bp of the mis-paired nucleotides, which is inconsistent with mechanistic models of canonical mycobacterial HR or other double-strand break (DSB) repair reactions. The results presented provide evidence of a novel NucS-associated mycobacterial MMR mechanism occurring in vivo to regulate genetic mutations in mycobacteria.

DNA Recombineering Applications

The ability to manipulate the bacterial genome is an obligatory premise for the study of gene function and regulation in bacterial cells. The λ red recombineering technique allows modification of chromosomal sequences with base-pair precision without the need of intermediate molecular cloning steps. Initially conceived to construct insertion mutants, the technique lends itself to a wide variety of applications including the creation of point mutants, seamless deletions, reporter, and epitope tag fusions and chromosomal rearrangements. Here, we introduce some of the most common implementations of the method.

Bacterial synthetic biology: tools for novel drug discovery

INTRODUCTION

Bacterial synthetic biology has provided powerful tools to revolutionize the drug discovery process. These tools can be harnessed to generate bacterial novel pharmaceutical compounds with enhanced bioactivity and selectivity or to create genetically modified microorganisms as living drugs.

AREAS COVERED

This review provides a current overview of the state-of-the-art in bacterial synthetic biology tools for novel drug discovery. The authors discuss the application of these tools including bioinformatic tools, CRISPR tools, engineered bacterial transcriptional regulators, and synthetic biosensors for novel drug discovery. Additionally, the authors present the recent progress on reprogramming bacteriophages as living drugs to fight against antibiotic-resistant pathogens.

EXPERT OPINION

The field of using bacterial synthetic biology tools for drug discovery is rapidly advancing. However, challenges remain in developing reliable and robust methods to engineer bacteria. Further advancements in synthetic biology hold promise to speed up drug discovery, facilitating the development of novel therapeutics against various diseases.

Site-directed mutagenesis of Mycobacterium tuberculosis and functional validation to investigate potential bedaquiline resistance-causing mutations

Molecular detection of bedaquiline resistant tuberculosis is challenging as only a small proportion of mutations in candidate bedaquiline resistance genes have been statistically associated with phenotypic resistance. We introduced two mutations, atpE Ile66Val and Rv0678 Thr33Ala, in the Mycobacterium tuberculosis H37Rv reference strain using homologous recombineering or recombination to investigate the phenotypic effect of these mutations. The genotype of the resulting strains was confirmed by Sanger- and whole genome sequencing, and bedaquiline susceptibility was assessed by minimal inhibitory concentration (MIC) assays. The impact of the mutations on protein stability and interactions was predicted using mutation Cutoff Scanning Matrix (mCSM) tools. The atpE Ile66Val mutation did not elevate the MIC above the critical concentration (MIC 0.25-0.5 µg/ml), while the MIC of the Rv0678 Thr33Ala mutant strains (> 1.0 µg/ml) classifies the strain as resistant, confirming clinical findings. In silico analyses confirmed that the atpE Ile66Val mutation minimally disrupts the bedaquiline-ATP synthase interaction, while the Rv0678 Thr33Ala mutation substantially affects the DNA binding affinity of the MmpR transcriptional repressor. Based on a combination of wet-lab and computational methods, our results suggest that the Rv0678 Thr33Ala mutation confers resistance to BDQ, while the atpE Ile66Val mutation does not, but definite proof can only be provided by complementation studies given the presence of secondary mutations.

Recombineering: Genetic Engineering in Escherichia coli Using Homologous Recombination

The bacterial chromosome and bacterial plasmids can be engineered in vivo by homologous recombination using either PCR products or synthetic double-stranded DNA (dsDNA) or single-stranded DNA as substrates. Multiple linear dsDNA molecules can be assembled into an intact plasmid. The technology of recombineering is possible because bacteriophage-encoded recombination proteins efficiently recombine sequences with homologies as short as 35 to 50 bases. Recombineering allows DNA sequences to be inserted or deleted without regard to the location of restriction sites and can also be used in combination with CRISPR/Cas targeting systems. © 2023 Wiley Periodicals LLC. This article has been contributed to by U.S. Government employees and their work is in the public domain in the USA. Basic Protocol: Making electrocompetent cells and transforming with linear DNA Support Protocol 1: Selection/counter-selections for genome engineering Support Protocol 2: Creating and screening for oligo recombinants by PCR Support Protocol 3: Other methods of screening for unselected recombinants Support Protocol 4: Curing recombineering plasmids containing a temperature-sensitive replication function Support Protocol 5: Removal of the prophage by recombineering Alternate Protocol 1: Using CRISPR/Cas9 as a counter-selection following recombineering Alternate Protocol 2: Assembly of linear dsDNA fragments into functional plasmids Alternate Protocol 3: Retrieval of alleles onto a plasmid by gap repair Alternate Protocol 4: Modifying multicopy plasmids with recombineering Support Protocol 6: Screening for unselected plasmid recombinants Alternate Protocol 5: Recombineering with an intact λ prophage Alternate Protocol 6: Targeting an infecting λ phage with the defective prophage strains.

Cre/lox-Mediated CRISPRi Library Reveals Core Genome of a Type I Methanotroph Methylotuvimicrobium buryatense 5GB1C

Methanotrophs play key roles in global methane cycling and are promising platforms for methane bioconversion. However, major gaps existing in fundamental knowledge undermines understanding of these methane-consuming microorganisms. To associate genes with a phenotype at the genome-wide level, we developed a Cre/lox-mediated method for constructing a large-scale CRISPRi library in a model methanotroph Methylotuvimicrobium buryatense 5GB1C. The efficiency of this Cre mediated integration method was up to a level of 10⁵ CFU/μg DNA. Targeting 4,100 predicted protein-coding genes, our CRISPRi pooled screening uncovered 788 core genes for the growth of strain 5GB1C using methane. The core genes are highly consistent with the gene knockout results, indicating the reliability of the CRISPRi screen. Insights from the core genes include that annotated isozymes generally exist in metabolic pathways and many core genes are hypothetical genes. This work not only provides functional genomic data for both fundamental research and metabolic engineering of methanotrophs, but also offers a method for CRISPRi library construction. IMPORTANCE Due to their key role in methane cycling and their industrial potential, methanotrophs have drawn increasing attention. Genome-wide experimental approaches for gene-phenotype mapping accelerate our understanding and engineering of a bacterium. However, these approaches are still unavailable in methanotrophs. This work has two significant implications. First, the core genes identified here provide functional genetic basics for complete reconstruction of the metabolic network and afford more clues for knowledge gaps. Second, the Cre-mediated knock-in method developed in this work enables large-scale DNA library construction in methanotrophs; the CRISPRi library can be used to screen the genes associated with special culture conditions.

An efficient, scarless, selection-free technology for phage engineering

Most recently developed phage engineering technologies are based on the CRISPR-Cas system. Here, we present a non-CRISPR-based method for genetically engineering the Escherichia coli phages T5, T7, P1, and λ by adapting the pORTMAGE technology, which was developed for engineering bacterial genomes. The technology comprises E. coli harbouring a plasmid encoding a potent recombinase and a gene transiently silencing a repair system. Oligonucleotides with the desired phage mutation are electroporated into E. coli followed by infection of the target bacteriophage. The high efficiency of this technology, which yields 1-14% of desired recombinants, allows low-throughput screening for the desired mutant. We have demonstrated the use of this technology for single-base substitutions, for deletions of 50-201 bases, for insertions of 20 bases, and for four different phages. The technology may also be readily modified for use across many additional bacterial and phage strains.[Figure: see text].

Recombineering in Non-Model Bacteria

The technology of recombineering, in vivo genetic engineering, was initially developed in Escherichia coli and uses bacteriophage-encoded homologous recombination proteins to efficiently recombine DNA at short homologies (35 to 50 nt). Because the technology is homology driven, genomic DNA can be modified precisely and independently of restriction site location. Recombineering uses linear DNA substrates that are introduced into the cell by electroporation; these can be PCR products, synthetic double-strand DNA (dsDNA), or single-strand DNA (ssDNA). Here we describe the applications, challenges, and factors affecting ssDNA and dsDNA recombineering in a variety of non-model bacteria, both Gram-negative and -positive, and recent breakthroughs in the field. We list different microbes in which the widely used phage λ Red and Rac RecET recombination systems have been used for in vivo genetic engineering. New homologous ssDNA and dsDNA recombineering systems isolated from non-model bacteria are also described. The Basic Protocol outlines a method for ssDNA recombineering in the non-model species of Shewanella. The Alternate Protocol describes the use of CRISPR/Cas as a counter-selection system in conjunction with recombineering to enhance recovery of recombinants. We provide additional background information, pertinent considerations for experimental design, and parameters critical for success. The design of ssDNA oligonucleotides (oligos) and various internet-based tools for oligo selection from genome sequences are also described, as is the use of oligo-mediated recombination. This simple form of genome editing uses only ssDNA oligo(s) and does not require an exogenous recombination system. The information presented here should help researchers identify a recombineering system suitable for their microbe(s) of interest. If no system has been characterized for a specific microbe, researchers can find guidance in developing a recombineering system from scratch. We provide a flowchart of decision-making paths for strategically applying annealase-dependent or oligo-mediated recombination in non-model and undomesticated bacteria. © 2022 Wiley Periodicals LLC. This article has been contributed to by U.S. Government employees and their work is in the public domain in the USA. Basic Protocol: ssDNA recombineering in Shewanella species Alternate Protocol: ssDNA recombineering coupled to CRISPR/Cas9 in Shewanella species.

Control of λ Lysogenic Escherichia coli Cells by Synthetic λ Phage Carrying cIantisense

Enterobacterial phage λ is a temperate phage that infects Escherichia coli and has a lytic-lysogenic life cycle. CI, a λ repressor, regulates the expression of lytic transcripts and acts as a major genetic switch that determines the lysogenic state. To manipulate the genome of phage λ, the CRISPR-Cas9 genome editing system was constructed in lysogenic E. coli MG1655 cells. For instance, we successfully changed cI857 to cIWT in the phage genome through Cas9-mediated single-nucleotide editing. A lytic phage was prepared by introducing an amber mutation in the middle of the cI gene, but it could not lyse lysogenic MG1655 cells. We prepared a phage expressing cI antisense mRNA by reverse substitution of the cI gene. Lysis of λ cI857 lysogenic cells occurred by the infection of the λ cIantisense. These results suggest an effective lysogenic cell control method by a synthetic phage expressing antisense mRNA of the genetic switch gene. It is expected to be applied as a tool to control harmful lysogenic microorganisms.

Past, Present, and Future of Genome Modification in Escherichia coli

Escherichia coli K-12 is one of the most well-studied species of bacteria. This species, however, is much more difficult to modify by homologous recombination (HR) than other model microorganisms. Research on HR in E. coli has led to a better understanding of the molecular mechanisms of HR, resulting in technical improvements and rapid progress in genome research, and allowing whole-genome mutagenesis and large-scale genome modifications. Developments using λ Red (exo, bet, and gam) and CRISPR-Cas have made E. coli as amenable to genome modification as other model microorganisms, such as Saccharomyces cerevisiae and Bacillus subtilis. This review describes the history of recombination research in E. coli, as well as improvements in techniques for genome modification by HR. This review also describes the results of large-scale genome modification of E. coli using these technologies, including DNA synthesis and assembly. In addition, this article reviews recent advances in genome modification, considers future directions, and describes problems associated with the creation of cells by design.

Efficient Single-Nucleotide Microbial Genome Editing Achieved Using CRISPR/Cpf1 with Maximally 3'-End-Truncated crRNAs

Mismatch tolerance, a cause of the off-target effect, impedes accurate genome editing with the CRISPR/Cas system. Herein, we observed that oligonucleotide-directed single-base substitutions could be rarely introduced in the microbial genome using CRISPR/Cpf1-mediated negative selection. Because crRNAs have the ability to recognize and discriminate among specific target DNA sequences, we systematically compared the effects of modified crRNAs with 3′-end nucleotide truncations and a single mismatch on the genomic cleavage activity of FnCpf1 inEscherichia coli. Five nucleotides could be maximally truncated at the crRNA 3′-end for the efficient cleavage of the DNA targets of galK and xylB in the cells. However, target cleavage in the genome was inefficient when a single mismatch was simultaneously introduced in the maximally 3′-end-truncated crRNA. Based on these results, we assumed that the maximally truncated crRNA-Cpf1 complex can distinguish between single-base-edited and unedited targets in vivo. Compared to other crRNAs with shorter truncations, maximally 3′-end-truncated crRNAs showed highly efficient single-base substitutions (>80%) in the DNA targets of galK and xylB. Furthermore, the editing efficiency for the 24 bases in both galK and xylB showed success rates of 79 and 50%, respectively. We successfully introduced single-nucleotide indels in galK and xylB with editing efficiencies of 79 and 62%, respectively. Collectively, the maximally truncated crRNA-Cpf1 complex could perform efficient base and nucleotide editing regardless of the target base location or mutation type; this system is a simple and efficient tool for microbial genome editing, including indel correction, at the single-nucleotide resolution.

Oligo targeting for profiling drug resistance mutations in the parasitic trypanosomatids

Trypanosomatids cause the neglected tropical diseases, sleeping sickness, Chagas disease and the leishmaniases. Studies on these lethal parasites would be further facilitated by new and improved genetic technologies. Scalable precision editing methods, for example, could be used to improve our understanding of potential mutations associated with drug resistance, a current priority given that several new anti-trypanosomal drugs, with known targets, are currently in clinical development. We report the development of a simple oligo targeting method for rapid and precise editing of priority drug targets in otherwise wild type trypanosomatids. In Trypanosoma brucei, approx. 50-b single-stranded oligodeoxynucleotides were optimal, multiple base edits could be incorporated, and editing efficiency was substantially increased when mismatch repair was suppressed. Resistance-associated edits were introduced in T. brucei cyclin dependent kinase 12 (CRK12, L482F) or cleavage and polyadenylation specificity factor 3 (N232H), in the Trypanosoma cruzi proteasome β5 subunit (G208S), or in Leishmania donovani CRK12 (G572D). We further implemented oligo targeting for site saturation mutagenesis, targeting codon G492 in T. brucei CRK12. This approach, combined with amplicon sequencing for codon variant scoring, revealed fourteen resistance conferring G492 edits encoding six distinct amino acids. The outputs confirm on-target drug activity, reveal a variety of resistance-associated mutations, and facilitate rapid assessment of potential impacts on drug efficacy.

Efficient and Iterative Retron-Mediated in vivo Recombineering in E. coli

Recombineering is an important tool in gene editing, enabling fast, precise and highly specific in vivo modification of microbial genomes. Oligonucleotide-mediated recombineering via the in vivo production of single-stranded DNA can overcome the limitations of traditional recombineering methods that rely on the exogenous delivery of editing templates. By modifying a previously reported plasmid-based system for fully in vivo single-stranded DNA recombineering, we demonstrate iterative editing of independent loci by utilizing a temperature-sensitive origin of replication for easy curing of the editing plasmid from recombinant cells. Optimization of the promoters driving the expression of the system’s functional components, combined with targeted counterselection against unedited cells with Cas9 nuclease, enabled editing efficiencies of 90–100%. The addition of a dominant-negative mutL allele to the system allowed single-nucleotide edits that were otherwise unachievable due to mismatch repair. Finally, we tested alternative recombinases and found that efficiency significantly increased for some targets. Requiring only a single cloning step for retargeting, our system provides an easy-to-use method for rapid, efficient construction of desired mutants.

Graphical Abstract

Targeted editing and evolution of engineered ribosomes in vivo by filtered editing

Genome editing technologies introduce targeted chromosomal modifications in organisms yet are constrained by the inability to selectively modify repetitive genetic elements. Here we describe filtered editing, a genome editing method that embeds group 1 self-splicing introns into repetitive genetic elements to construct unique genetic addresses that can be selectively modified. We introduce intron-containing ribosomes into the E. coli genome and perform targeted modifications of these ribosomes using CRISPR/Cas9 and multiplex automated genome engineering. Self-splicing of introns post-transcription yields scarless RNA molecules, generating a complex library of targeted combinatorial variants. We use filtered editing to co-evolve the 16S rRNA to tune the ribosome's translational efficiency and the 23S rRNA to isolate antibiotic-resistant ribosome variants without interfering with native translation. This work sets the stage to engineer mutant ribosomes that polymerize abiological monomers with diverse chemistries and expands the scope of genome engineering for precise editing and evolution of repetitive DNA sequences.

Generating Single Nucleotide Point Mutations in E. coli with the No-SCAR System

Genetic manipulation of microbial genomes is highly relevant for studying biological systems and the development of biotechnologies. In E. coli, λ-Red recombineering is one of the most widely used gene-editing methods, enabling site-specific insertions, deletions, and point mutations of any genomic locus. The no-SCAR system combines λ-Red recombineering with CRISPR/Cas9 for programmable selection of recombinant cells. Recombineering results in the transient production of heteroduplex DNA, as only one strand of DNA is initially altered, leaving the mismatched bases susceptible to repair by the host methyl-directed mismatch repair (MMR) system and reduces the efficiency of generating single nucleotide point mutations. Here we describe a method, where expression of cas9 and the MMR-inhibiting mutL_E32K variant are independently controlled by anhydrotetracycline- and cumate-inducible promoters from the pCas9CyMutL plasmid. Thus, MMR is selectively inhibited until recombinant cells have undergone replication and the desired mutation is permanently incorporated. By transiently inhibiting MMR, the accumulation of off-target mutations typically associated with MMR-deficient cell types is minimized. Methods for designing the editing template and sgRNA, cloning of the sgRNA, induction of λ-Red and MutL_E32K, the transformation of editing oligo, and induction of Cas9 for mutant selection are detailed within.

Plant Gene Modification by BAC Recombineering

Recombineering approaches exploiting the bacteriophage λ Red recombination functions are widely used for versatile modification of eukaryotic genes carried by bacterial artificial chromosomes (BACs) in E. coli. Whereas BAC transformation provides a simple means for integration of modified genes into the genomes of animal cells to generate knock-in and knockout lines, successful application of this strategy is hampered by low frequency of homologous recombination in higher plants. However, plant cells can be transformed at a high frequency using the transferred DNA (T-DNA) of Agrobacterium, which is stably and randomly integrated into the plant genome. The function of plant genes that are modified by recombineering and transferred by Agrobacterium T-DNA vectors into plant cells can thus be suitably studied using genetic complementation of knockout mutations induced by either T-DNA insertions or genome editing with T-DNA-based Crisp/Cas9 constructs. Here we describe two recombineering protocols for modification and transfer of plant genes from BACs into Agrobacterium T-DNA plant transformation vectors. The first protocol uses a conditional suicide ccdB gene cassette to assist the genetic complementation assays by generation of point mutations, deletions, and insertions at any gene position. The second "turbo"-recombineering protocol exploits various I-SceI insertion cassettes for fusing of fluorescent protein tags to the plant gene products to facilitate the characterization of their in vivo interacting partners by affinity purification, mass spectrometry, and cellular localization studies.

Targeted chromosomal Escherichia coli:dnaB exterior surface residues regulate DNA helicase behavior to maintain genomic stability and organismal fitness

Helicase regulation involves modulation of unwinding speed to maintain coordination of DNA replication fork activities and is vital for replisome progression. Currently, mechanisms for helicase regulation that involve interactions with both DNA strands through a steric exclusion and wrapping (SEW) model and conformational shifts between dilated and constricted states have been examined in vitro. To better understand the mechanism and cellular impact of helicase regulation, we used CRISPR-Cas9 genome editing to study four previously identified SEW-deficient mutants of the bacterial replicative helicase DnaB. We discovered that these four SEW mutations stabilize constricted states, with more fully constricted mutants having a generally greater impact on genomic stress, suggesting a dynamic model for helicase regulation that involves both excluded strand interactions and conformational states. These dnaB mutations result in increased chromosome complexities, less stable genomes, and ultimately less viable and fit strains. Specifically, dnaB:mut strains present with increased mutational frequencies without significantly inducing SOS, consistent with leaving single-strand gaps in the genome during replication that are subsequently filled with lower fidelity. This work explores the genomic impacts of helicase dysregulation in vivo, supporting a combined dynamic regulatory mechanism involving a spectrum of DnaB conformational changes and relates current mechanistic understanding to functional helicase behavior at the replication fork.

DNA replication is a vital biological process, and the proteins involved are structurally and functionally conserved across all domains of life. As our fundamental knowledge of genes and genetics grows, so does our awareness of links between acquired genetic mutations and disease. Understanding how genetic material is replicated accurately and efficiently and with high fidelity is the foundation to identifying and solving genome-based diseases. E. coli are model organisms, containing core replisome proteins, but lack the complexity of the human replication system, making them ideal for investigating conserved replisome behaviors. The helicase enzyme acts at the forefront of the replication fork to unwind the DNA helix and has also been shown to help coordinate other replisome functions. In this study, we examined specific mutations in the helicase that have been shown to regulate its conformation and speed of unwinding. We investigate how these mutations impact the growth, fitness, and cellular morphology of bacteria with the goal of understanding how helicase regulation mechanisms affect an organism’s ability to survive and maintain a stable genome.

Discovery and characterisation of an amidine-containing ribosomally-synthesised peptide that is widely distributed in nature

Ribosomally synthesised and post-translationally modified peptides (RiPPs) are a structurally diverse class of natural product with a wide range of bioactivities. Genome mining for RiPP biosynthetic gene clusters (BGCs) is often hampered by poor annotation of the short precursor peptides that are ultimately modified into the final molecule. Here, we utilise a previously described genome mining tool, RiPPER, to identify novel RiPP precursor peptides near YcaO-domain proteins, enzymes that catalyse various RiPP post-translational modifications including heterocyclisation and thioamidation. Using this dataset, we identified a novel and diverse family of RiPP BGCs spanning over 230 species of Actinobacteria and Firmicutes. A representative BGC from Streptomyces albidoflavus J1074 (formerly known as Streptomyces albus) was characterised, leading to the discovery of streptamidine, a novel amidine-containing RiPP. This new BGC family highlights the breadth of unexplored natural products with structurally rare features, even in model organisms.

A versatile genetic engineering toolkit for E. coli based on CRISPR-prime editing

CRISPR base editing is a powerful method to engineer bacterial genomes. However, it restricts editing to single-nucleotide substitutions. Here, to address this challenge, we adapt a CRISPR-Prime Editing-based, DSB-free, versatile, and single-nucleotide resolution genetic manipulation toolkit for prokaryotes. It can introduce substitutions, deletions, insertions, and the combination thereof, both in plasmids and the chromosome of E. coli with high fidelity. Notably, under optimal conditions, the efficiency of 1-bp deletions reach up to 40%. Moreover, deletions of up to 97 bp and insertions up to 33 bp were successful with the toolkit in E. coli, however, efficiencies dropped sharply with increased fragment sizes. With a second guide RNA, our toolkit can achieve multiplexed editing albeit with low efficiency. Here we report not only a useful addition to the genome engineering arsenal for E. coli, but also a potential basis for the development of similar toolkits for other bacteria.

Oligo-Mediated Recombineering and its Use for Making SNPs, Knockouts, Insertions, and Fusions in Mycobacterium tuberculosis

Phage recombination systems have been instrumental in the development of gene modification technologies for bacterial pathogens. In particular, the Che9 phage RecET system has been used successfully for over 10 years for making gene knockouts and fusions in Mycobacterium tuberculosis. This "recombineering" technology typically uses linear dsDNA substrates that contain a drug-resistance marker flanked by (up to) 500 base pairs of DNA homologous to the target site. Less often employed in mycobacterial recombineering is the use of oligonucleotides, which require only the action of the RecT annealase to align oligos to ssDNA regions of the replication fork, for subsequent incorporation into the chromosome. Despite the higher frequency of such events relative to dsDNA-promoted recombineering, oligo-mediated changes generally suffer from the disadvantage of not being selectable, thus making them harder to isolate. This chapter discusses steps and methodologies that increase the frequencies of finding oligo-mediated events, including the transfer of single nucleotide polymorphisms (SNPs) to mycobacterial chromosomes, and the use of oligos in conjunction with the mycobacterial phage Bxb1 site-specific recombination system for the easy generation of knockouts, insertion, and fusions, in a protocol known as ORBIT.

Efficient retroelement-mediated DNA writing in bacteria

The ability to efficiently and dynamically change information stored in genomes would enable powerful strategies for studying cell biology and controlling cellular phenotypes. Current recombineering-mediated DNA writing platforms in bacteria are limited to specific laboratory conditions, often suffer from suboptimal editing efficiencies, and are not suitable for in situ applications. To overcome these limitations, we engineered a retroelement-mediated DNA writing system that enables efficient and precise editing of bacterial genomes without the requirement for target-specific elements or selection. We demonstrate that this DNA writing platform enables a broad range of applications, including efficient, scarless, and cis-element-independent editing of targeted microbial genomes within complex communities, the high-throughput mapping of spatial information and cellular interactions into DNA memory, and the continuous evolution of cellular traits.

Directed Evolution: Methodologies and Applications

Directed evolution aims to expedite the natural evolution process of biological molecules and systems in a test tube through iterative rounds of gene diversifications and library screening/selection. It has become one of the most powerful and widespread tools for engineering improved or novel functions in proteins, metabolic pathways, and even whole genomes. This review describes the commonly used gene diversification strategies, screening/selection methods, and recently developed continuous evolution strategies for directed evolution. Moreover, we highlight some representative applications of directed evolution in engineering nucleic acids, proteins, pathways, genetic circuits, viruses, and whole cells. Finally, we discuss the challenges and future perspectives in directed evolution.

High-throughput functional variant screens via in vivo production of single-stranded DNA

Creating and characterizing individual genetic variants remains limited in scale, compared to the tremendous variation both existing in nature and envisioned by genome engineers. Here we introduce retron library recombineering (RLR), a methodology for high-throughput functional screens that surpasses the scale and specificity of CRISPR-Cas methods. We use the targeted reverse-transcription activity of retrons to produce single-stranded DNA (ssDNA) in vivo, incorporating edits at >90% efficiency and enabling multiplexed applications. RLR simultaneously introduces many genomic variants, producing pooled and barcoded variant libraries addressable by targeted deep sequencing. We use RLR for pooled phenotyping of synthesized antibiotic resistance alleles, demonstrating quantitative measurement of relative growth rates. We also perform RLR using the sheared genomic DNA of an evolved bacterium, experimentally querying millions of sequences for causal variants, demonstrating that RLR is uniquely suited to utilize large pools of natural variation. Using ssDNA produced in vivo for pooled experiments presents avenues for exploring variation across the genome.

Characterizing the portability of phage-encoded homologous recombination proteins

Efficient genome editing methods are essential for biotechnology and fundamental research. Homologous recombination (HR) is the most versatile method of genome editing, but techniques that rely on host RecA-mediated pathways are inefficient and laborious. Phage-encoded single-stranded DNA annealing proteins (SSAPs) improve HR 1,000-fold above endogenous levels. However, they are not broadly functional. Using Escherichia coli, Lactococcus lactis, Mycobacterium smegmatis, Lactobacillus rhamnosus and Caulobacter crescentus, we investigated the limited portability of SSAPs. We find that these proteins specifically recognize the C-terminal tail of the host's single-stranded DNA-binding protein (SSB) and are portable between species only if compatibility with this host domain is maintained. Furthermore, we find that co-expressing SSAPs with SSBs can significantly improve genome editing efficiency, in some species enabling SSAP functionality even without host compatibility. Finally, we find that high-efficiency HR far surpasses the mutational capacity of commonly used random mutagenesis methods, generating exceptional phenotypes that are inaccessible through sequential nucleotide conversions.

Recombineering and MAGE

Recombination-mediated genetic engineering, also known as recombineering, is the genomic incorporation of homologous single-stranded or double-stranded DNA into bacterial genomes. Recombineering and its derivative methods have radically improved genome engineering capabilities, perhaps none more so than multiplex automated genome engineering (MAGE). MAGE is representative of a set of highly multiplexed single-stranded DNA-mediated technologies. First described in Escherichia coli, both MAGE and recombineering are being rapidly translated into diverse prokaryotes and even into eukaryotic cells. Together, this modern set of tools offers the promise of radically improving the scope and throughput of experimental biology by providing powerful new methods to ease the genetic manipulation of model and non-model organisms. In this Primer, we describe recombineering and MAGE, their optimal use, their diverse applications and methods for pairing them with other genetic editing tools. We then look forward to the future of genetic engineering.

Genome Mining and Metabolomics Uncover a Rare d-Capreomycidine Containing Natural Product and Its Biosynthetic Gene Cluster

We report the metabolomics-driven genome mining of a new cyclic-guanidino incorporating non-ribosomal peptide synthetase (NRPS) gene cluster and full structure elucidation of its associated hexapeptide product, faulknamycin. Structural studies unveiled that this natural product contained the previously unknown (R,S)-stereoisomer of capreomycidine, d-capreomycidine. Furthermore, heterologous expression of the identified gene cluster successfully reproduces faulknamycin production without an observed homologue of VioD, the pyridoxal phosphate (PLP)-dependent enzyme found in all previous l-capreomycidine biosynthesis. An alternative NRPS-dependent pathway for d-capreomycidine biosynthesis is proposed.

Meta-Tyrosine Induces Cytotoxic Misregulation of Metabolism in Escherichia coli

The non-protein amino acid meta-Tyrosine (m-Tyr) is produced in cells under conditions of oxidative stress, and m-Tyr has been shown to be toxic to a broad range of biological systems. However, the mechanism by which m-Tyr damages cells is unclear. In E. coli, the quality control (QC) function of phenyalanyl-tRNA synthetase (PheRS) is required for resistantce to m-Tyr. To determine the mechanism of m-Tyr toxicity, we utilitized a strain of E. coli that expresses a QC-defective PheRS. The global responses of E. coli cells to m-Tyr were assessed by RNA-seq, and >500 genes were differentially expressed after the addition of m-Tyr. The most strongly up-regulated genes are involved in unfolded-protein stress response, and cells exposed to m-Tyr contained large, electron-dense protein aggregates, indicating that m-Tyr destabilized a large fraction of the proteome. Additionally, we observed that amino acid biosynthesis and transport regulons, controlled by ArgR, TrpR, and TyrR, and the stringent-response regulon, controlled by DksA/ppGpp, were differentially expressed. m-Tyr resistant mutants were isolated and found to have altered a promoter to increase expression of the enzymes for Phe production or to have altered transporters, which likely result in less uptake or increased efflux of m-Tyr. These findings indicate that when m-Tyr has passed the QC checkpoint by the PheRS, this toxicity of m-Tyr may result from interfering with amino acid metabolism, destabalizing a large number of proteins, and the formation of protein aggregates.

Extensive trimming of short single-stranded DNA oligonucleotides during replication-coupled gene editing in mammalian cells

Through transfection of short single-stranded oligodeoxyribonucleotides (ssODNs) small genomic alterations can be introduced into mammalian cells with high precision. ssODNs integrate into the genome during DNA replication, but the resulting heteroduplex is prone to detection by DNA mismatch repair (MMR), which prevents effective gene modification. We have previously demonstrated that the suppressive action of MMR can be avoided when the mismatching nucleotide in the ssODN is a locked nucleic acid (LNA). Here, we reveal that LNA-modified ssODNs (LMOs) are not integrated as intact entities in mammalian cells, but are severely truncated before and after target hybridization. We found that single additional (non-LNA-modified) mutations in the 5’-arm of LMOs influenced targeting efficiencies negatively and activated the MMR pathway. In contrast, additional mutations in the 3’-arm did not affect targeting efficiencies and were not subject to MMR. Even more strikingly, homology in the 3’-arm was largely dispensable for effective targeting, suggestive for extensive 3’-end trimming. We propose a refined model for LMO-directed gene modification in mammalian cells that includes LMO degradation.

The first step of many gene editing approaches in mammalian cells is to generate a targeted DNA lesion. By administering a repair template as second step, endogenous DNA repair mechanisms can be misled to introduce specific gene variants. However, subtle gene modification can also be achieved with high precision through a one-action protocol in the absence of DNA breaks. We have shown before that short single-stranded DNA molecules (LMOs) are very useful to introduce and study genetic variants that may predispose patients to cancer. While LMOs are known to integrate into the genome during DNA replication, the precise mechanism is poorly understood. We targeted mouse embryonic stem cells with differently designed LMOs to examine their effectiveness and editing outcomes. Based on these results we conclude that the two LMO termini are processed at different moments during the gene editing process. While the 3’-arm is degraded prior to LMO binding to the target site, the 5’-arm is degraded afterwards. Counterintuitively we also observe that partial degradation of the 3’-arm increases targeting efficiencies. Taken together our data provides novel mechanistic insight into our understanding of replication-coupled gene editing and may guide future LMO design strategies.

CRISPR-Cas-mediated gene editing in lactic acid bacteria

The high efficiency, convenience and diversity of clustered regular interspaced short palindromic repeats (CRISPR)/CRISPR-associated (Cas) systems are driving a technological revolution in the gene editing of lactic acid bacteria (LAB). Cas-RNA cassettes have been adopted as tools to perform gene deletion, insertion and point mutation in several species of LAB. In this article, we describe the basic mechanisms of the CRISPR-Cas system, and the current gene editing methods available, focusing on the CRISPR-Cas models developed for LAB. We also compare the different types of CRISPR-Cas-based genomic manipulations classified according to the different Cas proteins and the type of recombineering, and discuss the rapidly evolving landscape of CRISPR-Cas application in LAB.

Bacterial Genetic Engineering by Means of Recombineering for Reverse Genetics

Serving a robust platform for reverse genetics enabling the in vivo study of gene functions primarily in enterobacteriaceae, recombineering -or recombination-mediated genetic engineering-represents a powerful and relative straightforward genetic engineering tool. Catalyzed by components of bacteriophage-encoded homologous recombination systems and only requiring short ∼40–50 base homologies, the targeted and precise introduction of modifications (e.g., deletions, knockouts, insertions and point mutations) into the chromosome and other episomal replicons is empowered. Furthermore, by its ability to make use of both double- and single-stranded linear DNA editing substrates (e.g., PCR products or oligonucleotides, respectively), lengthy subcloning of specific DNA sequences is circumvented. Further, the more recent implementation of CRISPR-associated endonucleases has allowed for more efficient screening of successful recombinants by the selective purging of non-edited cells, as well as the creation of markerless and scarless mutants. In this review we discuss various recombineering strategies to promote different types of gene modifications, how they are best applied, and their possible pitfalls.

Site-Directed Mutagenesis of Large Biosynthetic Gene Clusters via Oligonucleotide Recombineering and CRISPR/Cas9 Targeting

Genetic engineering of natural product biosynthetic gene clusters represents an attractive approach to access new and complex bioactive small molecules. However, due to the large number and size of some genes involved in specialized metabolism, notably those encoding modular polyketide synthase and nonribosomal peptide synthetase megaproteins, it remains difficult to introduce precise genetic mutations to probe domain activity or alter chemical product formation. Here, we report the development and validation of a robust method combining oligonucleotide recombineering and CRISPR/Cas9 targeting for rapid site-directed mutagenesis of cloned pathways, which can be directly transferred to a heterologous host for expression. We rapidly generated 12 point mutations and identified several important determinants of successful mutagenesis, including the protospacer/PAM sequence and presence of regions of local homology. Our approach may be broadly applicable for researchers interested in probing natural product biosynthesis or performing pathway engineering.

Improved bacterial recombineering by parallelized protein discovery

Exploiting bacteriophage-derived homologous recombination processes has enabled precise, multiplex editing of microbial genomes and the construction of billions of customized genetic variants in a single day. The techniques that enable this, multiplex automated genome engineering (MAGE) and directed evolution with random genomic mutations (DIvERGE), are however, currently limited to a handful of microorganisms for which single-stranded DNA-annealing proteins (SSAPs) that promote efficient recombineering have been identified. Thus, to enable genome-scale engineering in new hosts, efficient SSAPs must first be found. Here we introduce a high-throughput method for SSAP discovery that we call "serial enrichment for efficient recombineering" (SEER). By performing SEER in Escherichia coli to screen hundreds of putative SSAPs, we identify highly active variants PapRecT and CspRecT. CspRecT increases the efficiency of single-locus editing to as high as 50% and improves multiplex editing by 5- to 10-fold in E. coli, while PapRecT enables efficient recombineering in Pseudomonas aeruginosa, a concerning human pathogen. CspRecT and PapRecT are also active in other, clinically and biotechnologically relevant enterobacteria. We envision that the deployment of SEER in new species will pave the way toward pooled interrogation of genotype-to-phenotype relationships in previously intractable bacteria.

Determinants for Efficient Editing with Cas9-Mediated Recombineering in Escherichia coli

In E. coli, editing efficiency with Cas9-mediated recombineering varies across targets due to differences in the level of Cas9:gRNA-mediated DNA double-strand break (DSB)-induced cell death. We found that editing efficiency with the same gRNA and repair template can also change with target position, cas9 promoter strength, and growth conditions. Incomplete editing, off-target activity, nontargeted mutations, and failure to cleave target DNA even if Cas9 is bound also compromise editing efficiency. These effects on editing efficiency were gRNA-specific. We propose that differences in the efficiency of Cas9:gRNA-mediated DNA DSBs, as well as possible differences in binding of Cas9:gRNA complexes to their target sites, account for the observed variations in editing efficiency between gRNAs. We show that editing behavior using the same gRNA can be modified by mutating the gRNA spacer, which changes the DNA DSB activity. Finally, we discuss how variable editing with different gRNAs could limit high-throughput applications and provide strategies to overcome these limitations.

CRISPR-Cas9-mediated pinpoint microbial genome editing aided by target-mismatched sgRNAs

Genome editing has been revolutionized by the CRISPR-Cas9 system. CRISPR-Cas9 is composed of single-molecular guide RNA (sgRNA) and a proteinaceous Cas9 nuclease, which recognizes a specific target sequence and a protospacer adjacent motif (PAM) sequence and, subsequently, cleaves the targeted DNA sequence. This CRISPR-Cas9 system has been used as an efficient negative-selection tool to cleave unedited or unchanged target DNAs during site-specific mutagenesis and, consequently, obtain microbial cells with desired mutations. This study aimed to investigate the genome editing efficiency of the CRISPR-Cas9 system for in vivo oligonucleotide-directed mutagenesis in bacteria. This system successfully introduced two- to four-base mutations in galK in Escherichia coli with high editing efficiencies (81%−86%). However, single-point mutations (T504A or C578A) were rarely introduced with very low editing efficiencies (<3%), probably owing to mismatch tolerance. To resolve this issue, we designed one- or two-base mismatches in the sgRNA sequence to recognize target sequences in galK in E. coli. A single-point nucleotide mutation (T504A or C578A in the galK gene) was successfully introduced in 36%−95% of negatively selected E. coli cells using single-base mismatched sgRNAs. Sixteen targets were randomly selected through genome-wide single-base editing experiments using mismatched sgRNAs. Consequently, out of 48 desired single-base mutations, 25 single bases were successfully edited, using mismatched sgRNAs. Finally, applicable design rules for target-mismatched sgRNAs were provided for single-nucleotide editing in microbial genomes.

High-Efficiency Multi-site Genomic Editing of Pseudomonas putida through Thermoinducible ssDNA Recombineering

Application of single-stranded DNA recombineering for genome editing of species other than enterobacteria is limited by the efficiency of the recombinase and the action of endogenous mismatch repair (MMR) systems. In this work we have set up a genetic system for entering multiple changes in the chromosome of the biotechnologically relevant strain EM42 of Pseudomononas putida. To this end high-level heat-inducible co-transcription of the rec2 recombinase and P. putida's allele mutLE36KPP was designed under the control of the PL/cI857 system. Cycles of short thermal shifts followed by transformation with a suite of mutagenic oligos delivered different types of genomic changes at frequencies up to 10% per single modification. The same approach was instrumental to super-diversify short chromosomal portions for creating libraries of functional genomic segments-e.g., ribosomal-binding sites. These results enabled multiplexing of genome engineering of P. putida, as required for metabolic reprogramming of this important synthetic biology chassis.

CRISPRi System as an Efficient, Simple Platform for Rapid Identification of Genes Involved in Pollutant Transformation by Aeromonas hydrophila

Aeromonas species are indigenous in diverse aquatic environments and play important roles in environmental remediation. However, the pollutant transformation mechanisms of these bacteria remain elusive, and their potential in pollution control is largely unexploited so far. In this work, we report an efficient and simple genome regulation tool to edit Aeromonas hydrophila and identify its biomolecular pathways for pollutant transformation. The genome regulation system, which is based on the type II clustered regularly interspaced short palindromic repeat interference (CRISPRi) system from Streptococcus pyogenes, can serve as a reversible and multiplexible platform for gene knockdown in A. hydrophila. A single-plasmid CRISPRi system harboring both dCas9 and the sgRNA was constructed in A. hydrophila and used to silence diverse genes with varied sizes and expression levels. With this system, up to 467-fold repression of gfp expression was achieved, and the function of the essential gene-ftsZ was identified quickly and accurately. Furthermore, simultaneous transcriptional repression of multiple targeted genes was realized. We discovered that the ars operon played an essential role in arsenic detoxification, and the extracellular electron transfer (EET) pathway was involved in methyl orange reduction, but not in vanadium reduction by A. hydrophila. Our method allows better insights and effective genetic manipulation of the pollutant transformation processes in Aeromonas, which might facilitate more efficient utilization of the Aeromonas species and other microbial species for environmental remediation applications.

DNA gap repair in Escherichia coli for multiplex site-directed mutagenesis

Site-directed mutagenesis allows the generation of novel DNA sequences that can be used for a variety of important applications such as the functional analysis of genetic variants. To overcome the limitations of existing site-directed mutagenesis approaches, we explored in vivo DNA gap repair. We found that site-specific mutations in plasmid DNA can be generated in Escherichia coli using mutant single-stranded oligonucleotides to target PCR-derived linear double-stranded plasmid DNA. We called this method DeGeRing, and we characterized its advantages, including non-biased multiplex mutagenesis, over existing site-directed mutagenesis methods such as recombineering (recombination-mediated genetic engineering), single DNA break repair (SDBR, introduced by W. Mandecki), and QuikChange (Agilent Technologies, La Jolla, CA). We determined the efficiency of DeGeRing to induce site-directed mutations with and without a phenotype in three K-12 E coli strains using multiple single-stranded oligonucleotides containing homological and heterological parts of various sizes. Virtual lack of background made the isolation of mutants with frequencies up to 10^-6 unnecessary. Our data show that endogenous DNA gap repair in E coli supports efficient multiplex site-directed mutagenesis. DeGeRing might facilitate the generation of mutant DNA sequences for protein engineering and the functional analysis of genetic variants in reverse genetics.

CRISPR/Cas9 recombineering-mediated deep mutational scanning of essential genes in Escherichia coli

Deep mutational scanning can provide significant insights into the function of essential genes in bacteria. Here, we developed a high-throughput method for mutating essential genes of Escherichia coli in their native genetic context. We used Cas9-mediated recombineering to introduce a library of mutations, created by error-prone PCR, within a gene fragment on the genome using a single gRNA pre-validated for high efficiency. Tracking mutation frequency through deep sequencing revealed biases in the position and the number of the introduced mutations. We overcame these biases by increasing the homology arm length and blocking mismatch repair to achieve a mutation efficiency of 85% for non-essential genes and 55% for essential genes. These experiments also improved our understanding of poorly characterized recombineering process using dsDNA donors with single nucleotide changes. Finally, we applied our technology to target rpoB, the beta subunit of RNA polymerase, to study resistance against rifampicin. In a single experiment, we validate multiple biochemical and clinical observations made in the previous decades and provide insights into resistance compensation with the study of double mutants.

Dynamic Genome Editing Using In Vivo Synthesized Donor ssDNA in Escherichia coli

As a key element of genome editing, donor DNA introduces the desired exogenous sequence while working with other crucial machinery such as CRISPR-Cas or recombinases. However, current methods for the delivery of donor DNA into cells are both inefficient and complicated. Here, we developed a new methodology that utilizes rolling circle replication and Cas9 mediated (RC-Cas-mediated) in vivo single strand DNA (ssDNA) synthesis. A single-gene rolling circle DNA replication system from Gram-negative bacteria was engineered to produce circular ssDNA from a Gram-positive parent plasmid at a designed sequence in Escherichia coli. Furthermore, it was demonstrated that the desired linear ssDNA fragment could be cut out using CRISPR-associated protein 9 (CRISPR-Cas9) nuclease and combined with lambda Red recombinase as donor for precise genome engineering. Various donor ssDNA fragments from hundreds to thousands of nucleotides in length were synthesized in E. coli cells, allowing successive genome editing in growing cells. We hope that this RC-Cas-mediated in vivo ssDNA on-site synthesis system will be widely adopted as a useful new tool for dynamic genome editing.