Amino acid sequence homology among the major outer membrane proteins of Escherichia coli

High-level carbapenem resistance in a Klebsiella pneumoniae clinical isolate is due to the combination of bla(ACT-1) beta-lactamase production, porin OmpK35/36 insertional inactivation, and down-regulation of the phosphate transport porin phoe

Clinical isolates of Klebsiella pneumoniae resistant to carbapenems and essentially all other antibiotics (multidrug resistant) are being isolated from some hospitals in New York City with increasing frequency. A highly related pair of K. pneumoniae strains isolated on the same day from one patient in a hospital in New York City were studied for antibiotic resistance. One (KP-2) was resistant to imipenem, meropenem, and sulopenem (MICs of 16 to 32 microg/ml) while the other (KP-1) was susceptible (MIC of 0.5 microg/ml); both contained the bla(ACT-1), bla(SHV-1), and bla(TEM-1) beta-lactamases. bla(ACT-1) in both strains was encoded on a large approximately 150-kb plasmid. Both isolates contained an identical class 1 integron encoding resistance to aminoglycosides and chloramphenicol. They each had identical insertions in ompK35 and ompK36, resulting in disruption of these key porin genes. The carbapenem-resistant and -susceptible isolates were extensively studied for differences in the structural and regulatory genes for the operons acrRAB, marORAB, romA-ramA, soxRS, micF, micC, phoE, phoBR, rpoS, and hfq. No changes were detected between the isolates except for a significant down-regulation of ompK37, phoB, and phoE in KP-2 as deduced from reverse transcription-PCR analysis of mRNA and polyacrylamide gel electrophoresis separation of outer membrane proteins. Backcross analysis was conducted using the wild-type phoE gene cloned into the vector pGEM under regulation of its native promoter as well as the lacZ promoter following transformation into the resistant KP-2 isolate. The wild-type gene reversed carbapenem resistance only when under control of the heterologous lacZ promoter. In the background of ompK35-ompK36 gene disruption, the up-regulation of phoE in KP-1 apparently compensated for porin loss and conferred carbapenem susceptibility. Down-regulation of phoE in KP-2 may represent the normal state of this gene, or it may have been selected from KP-1 in vivo under antibiotic pressure, generating the carbapenem-resistant clone. This is the first study in the Enterobacteriaceae where expression of the phosphate-regulated PhoE porin has been associated with resistance to antimicrobials. Our results with this pair of Klebsiella clinical isolates highlight the complex and evolving nature of multiple drug resistance in this species.

Cloning and nucleotide sequence of the Pseudomonas aeruginosa glucose-selective OprB porin gene and distribution of OprB within the family Pseudomonadaceae

OprB is a glucose-selective porin known to be produced by Pseudomonas aeruginosa and Pseudomonas putida. We have cloned and sequenced the oprB gene of P. aeruginosa and obtained expression of OprB in Escherichia coli. The mature protein consists of 423 amino acid residues with a deduced molecular mass of 47597 Da. Several clusters of amino acid residues, potentially involved in the structure or function of the protein, were identified. An area of regional homology with E. coli LamB was also identified. Carbohydrate-inducible proteins, potentially homologous to OprB, were identified in several rRNA homology-group-I pseudomonads by sodium dodecyl sulfate/polyacrylamide gel electrophoresis analysis, Western immunoblotting and N-terminal amino acid sequencing. These species also contained DNA that hybridized to a P. aeruginosa oprB gene probe.

OmpF assembly mutants of Escherichia coli K-12: isolation, characterization, and suppressor analysis

This paper describes a novel genetic method used to isolate mutations that alter proper assembly of OmpF in the outer membrane. The thermolabile nature of assembly intermediates allowed selection of temperature-sensitive mutations within the ompF gene. A variant allele of ompF (ompF-Dex) was used because it provided a convenient selectable phenotype (Dex+). Assembly mutants were isolated in two steps. First, amber mutations were obtained that mapped in ompF-Dex. This resulted in a Dex- phenotype. Starting with these Dex- strains, Dex+ revertants were isolated. Mutants that displayed a temperature-sensitive Dex+ phenotype were further characterized. Three such mutants possessed a single substitution within ompF that reverted the nonsense codon to a sense codon which replaced W214 with either an E or Q and Y231 with a Q residue in the mature OmpF protein. All three mutant OmpF proteins showed an assembly defect. This defect led to a substantial reduction in the amount of stable OmpF trimers with the concomitant increase of a high-molecular-weight form of OmpF which migrated at the top of the gel. Suppressor mutations were sought that corrected the assembly defect of OmpF. These extragenic suppressor mutations were mapped at 45 min on the Escherichia coli chromosome. The suppressor mutations displayed no allele specificity and were recessive to the wild-type allele. In the presence of a suppressor, mutant stable trimers appeared in an almost normal manner. The appearance of stable trimers concurred with a substantial loss of the high-molecular-weight OmpF species. At this stage, it is not clear whether the high-molecular-weight species of OmpF is a normal assembly intermediate or a dead-end assembly product. The results presented in this study raise the intriguing possibility of a chaperone-like activity for the wild-type suppressor gene product.

Combinatorial mutagenesis of the lamB gene: residues 41 through 43, which are conserved in Escherichia coli outer membrane proteins, are informationally important in maltoporin structure and function

A new strategy for combinatorial mutagenesis was developed and applied to residues 40 through 60 of LamB protein (maltoporin), with the aim of identifying amino acids important for LamB structure and function. The strategy involved a template containing a stop codon in the target sequence and a pool of random degenerate oligonucleotides covering the region. In vitro mutagenesis followed by selection for function (Dex+, ability to utilize dextrins) corrected the nonsense mutation and simultaneously forced incorporation of a random mutation(s) within the region. The relative importance of each residue within the target was indicated by the frequency and nature of neutral and deleterious mutations recovered at each position. Residues 41 through 43 in LamB accepted few neutral substitutions, whereas residues 55 through 57 were highly flexible in this regard. Consistent with this finding was that the majority of defective mutants were altered at residues 41 to 43. Characterization of these mutants indicated that the nature of residues 41 to 43 influenced the amount of stable protein in the outer membrane. These results, as well as the conserved nature of this stretch of residues among outer membrane proteins, suggest that residues 41 to 43 of LamB play an important role in the process of outer membrane localization.

Expert system for predicting protein localization sites in gram-negative bacteria

We have developed an expert system that makes use of various kinds of knowledge organized as "if-then" rules for predicting protein localization sites in Gram-negative bacteria, given the amino acid sequence information alone. We considered four localization sites: the cytoplasm, the inner (cytoplasmic) membrane, the periplasm, and the outer membrane. Most rules were derived from experimental observations. For example, the rule to recognize an inner membrane protein is the presence of either a hydrophobic stretch in the predicted mature protein or an uncleavable N-terminal signal sequence. Lipoproteins are first recognized by a consensus pattern and then assumed present at either the inner or outer membrane. These two possibilities are further discriminated by examining an acidic residue in the mature N-terminal portion. Furthermore, we found an empirical rule that periplasmic and outer membrane proteins were successfully discriminated by their different amino acid composition. Overall, our system could predict 83% of the localization sites of proteins in our database.

Nucleotide and derived amino acid sequences of the major porin of Comamonas acidovorans and comparison of porin primary structures

The DNA sequence of the gene which codes for the major outer membrane porin (Omp32) of Comamonas acidovorans has been determined. The structural gene encodes a precursor consisting of 351 amino acid residues with a signal peptide of 19 amino acid residues. Comparisons with amino acid sequences of outer membrane proteins and porins from several other members of the class Proteobacteria and of the Chlamydia trachomatis porin and the Neurospora crassa mitochondrial porin revealed a motif of eight regions of local homology. The results of this analysis are discussed with regard to common structural features of porins.

Glycine-144 is required for efficient folding of outer membrane protein PhoE of Escherichia coli K12

Short stretches of similar sequences have been detected in unrelated bacterial outer membrane proteins (Nikaido and Wu (1984) Proc. Natl. Acad. Sci. USA 81, 1048-1052). In the most pronounced similarity region, only a glycine residue is absolutely conserved. To investigate whether this glycine residue is essential for outer membrane incorporation, oligonucleotide-directed mutagenesis was applied to replace this residue, i.e. Gly-144, as well as two other Gly-residues in pore protein PhoE. Substitution of Gly-52 and Gly-258 by Ala and Val, respectively, did not influence outer membrane incorporation. However, the substitution of Gly-144 by Leu affected the efficiency of outer membrane incorporation. After in vitro synthesis this mutant protein was less efficiently precipitated with monoclonal antibodies that recognize conformational epitopes than wild-type PhoE, showing that the mutation interferes with correct folding of the protein.

Biophysics of the structure and function of porins

Gram-negative bacteria such asEscherichia coli(E. coli) andSalmonella typhimurium(S. typhimurium) have two layers of membranes in the cellular envelope – the cytoplasmic membrane and the outer membrane (Fig. I). Between these membranes is a periplasmic space in which there is a peptidoglycan layer that provides the cells with mechanical rigidity. In this periplasmic space, there are also a variety of hydrolases and binding proteins. The composition of the outer membrane is somewhat unusual. This membrane bilayer is asymmetric, having an inner (periplasmic) leaflet composed of phospholipids and an outer (extracellular) leaflet formed by lipopolysaccharide (LPS). Unlike phospholipids having two acyl chains, LPS has six or seven saturated fatty acid chains (see reviews, Lugtenberg & Van Alphen, 1983; Nikaido & Vaara, 1985; Nakae, 1986). The head groups of LPS have a strong affinity for divalent cations such as Ca2+, and given a sufficient concentration of these ions the outer membrane can form quite a formidable permeability barrier through this head group/salt bridge network (Nikaido & Vaara, 1985). The function of the outer membrane is to serve as a protective envelope against hostile environments such as those in the intestinal tract of animals where harmful and toxic substances - for example, bile salts and various enzymes - are often found. The outer membrane itself would be impermeable to most hydrophilic solutes were it not for the presence of membrane channels. The presence of a large number of pore-forming proteins provides both specific and nonspecific diffusion pathways across the outer membrane for solutes such as nutrients and waste products to diffuse into or out of the cell.

Involvement of OmpF during reception and translocation steps of colicin N entry

[125I]-colicin N binds to OmpF receptor sites (70,000 per cell) with an average Kassoc of 3.2 x 10(6) M-1 at 23 degrees C. Monoclonal antibody directed against a cell-surface-exposed epitope of OmpF is able to complete with the binding of the colicin in vitro and also to protect against colicin N in vivo. OmpF is an absolute requirement for colicin N uptake. OmpC cannot serve as a substitute for OmpF during translocation across the outer membrane under receptor bypass conditions, which is in contrast to colicin A. Colicin N does not cross-react with various monoclonal antibodies directed against colicin A.

The TraT lipoprotein as a vehicle for the transport of foreign antigenic determinants to the cell surface of Escherichia coli K12: structure-function relationships in the TraT protein

The TraT protein is a surface-exposed lipoprotein, specified by plasmids of the IncF group, that mediates serum resistance and surface exclusion. The structure and function of the TraT protein determined by plasmid R6-5 was probed by genetic insertion of a foreign antigenic determinant, the C3 epitope of polio virus, at residues 61, 125, 180, 200 or 216 of the protein. The chimaeric proteins were transported to the outer membrane and, in three cases, immunoassays with an anti-C3 monoclonal antibody indicated that the C3 epitope was exposed on the cell surface. Three of the hybrids, with insertions at residues 125, 180 and 200, assembled into the trypsin-resistant oligomeric form characteristic of the wild-type protein, which suggested that these regions are not involved in TraT subunit:subunit interactions. Additionally, the hybrid protein carrying the C3 epitope at position 180 functioned in a genetic suppression assay and retained partial surface-exclusion activity. Thus, its localization, folding and organization does not appear to be grossly altered from that of the wild-type protein. Applications of the protein for the transport of foreign antigenic determinants to the cell surface are discussed.

Characterization of ompF domains involved in Escherichia coli K-12 sensitivity to colicins A and N

Various ompF-ompC, ompC-ompF, and ompF-ompC-ompF chimeric genes were used to locate the domains of the OmpF protein involved in cellular sensitivity to colicins. Various parts of the porin participate in the entry of colicins. Colicin N receptor activity was found to require three regions: RN1, located between residues 1 and 63; RN2, located between residues 115 and 262; and RN3, located between residues 279 and 297. The central domain from residues 143 to 262 is involved during the translocation step after the binding step. A large region, including residues 1 to 262, is necessary during colicin A entry. The locations and interactions between these domains specifically required for the uptake of colicins to occur are described and discussed with regard to the homology and topology of the OmpC, OmpF, and PhoE porins.

Signal peptide mutants of Escherichia coli

Numerous secretory proteins of the Gram-negative bacteria E. coli are synthesized as precursor proteins which require an amino terminal extension known as the signal peptide for translocation across the cytoplasmic membrane. Following translocation, the signal peptide is proteolytically cleaved from the precursor to produce the mature exported protein. Signal peptides do not exhibit sequence homology, but invariably share common structural features: (1) The basic amino acid residues positioned at the amino terminus of the signal peptide are probably involved in precursor protein binding to the cytoplasmic membrane surface. (2) A stretch of 10 to 15 nonpolar amino acid residues form a hydrophobic core in the signal peptide which can insert into the lipid bilayer. (3) Small residues capable of beta-turn formation are located at the cleavage site in the carboxyl terminus of the signal peptide. (4) Charge characteristics of the amino terminal region of the mature protein can also influence precursor protein export. A variety of mutations in each of the structurally distinct regions of the signal peptide have been constructed via site-directed mutagenesis or isolated through genetic selection. These mutants have shed considerable light on the structure and function of the signal peptide and are reviewed here.

Evolutionary relationship between the TonB-dependent outer membrane transport proteins: nucleotide and amino acid sequences of the Escherichia coli colicin I receptor gene

The nucleotide sequence of the Escherichia coli colicin I receptor gene (cir) has been determined. The predicted mature protein consists of 599 amino acids and has a molecular weight of 67,169. Several previously noted characteristics of other E. coli outer membrane protein sequences were also identified in the sequence of Cir. These include an overall acidic nature, the absence of long hydrophobic stretches of amino acids, and a lack of predicted alpha-helical secondary structure. Because two classes of outer membrane proteins (the TonB-dependent transport proteins and the porins) share some structural features, protein sequences from both of these groups were aligned pairwise and scored for sequence similarity. Statistical evidence suggested that the porins were not related to the proteins in the TonB-dependent group; however, there was a significant relationship between the proteins in the TonB-dependent group. On the basis of the multiple progressive sequence alignment and the similarity scores derived from it, a tree representing evolutionary distance between five TonB-dependent outer membrane transport proteins was generated.

Effect of lipopolysaccharide structure on reactivity of antiporin monoclonal antibodies with the bacterial cell surface

We studied the reactivity of 66 anti-Escherichia coli B/r porin monoclonal antibodies (MAbs) with several E. coli and Salmonella typhimurium strains. Western immunoblots showed complete immunological cross-reactivity between E. coli B/r and K-12; among 34 MAbs which recognized porin in immunoblots of denatured outer membranes of E. coli B/r, all reacted with OmpF in denatured outer membranes of E. coli K-12. Extensive reactivity, although less than that for strain B/r (31 of 34 MAbs), occurred for porin from a wild-type isolate, E. coli O8:K27. Only one of the MAbs reacted with porin in denatured outer membranes of S. typhimurium. Even with immunochemical amplification of the Western immunoblot technique, only six MAbs recognized S. typhimurium porin (OmpD), demonstrating that there is significant immunological divergence between the porins of these species. Antibody binding to the bacterial surface, which was analyzed by cytofluorimetry, was strongly influenced by lipopolysaccharide (LPS) structure. An intact O antigen, as in E. coli O8:K27, blocked adsorption of all 20 MAbs in the test panel. rfa+ E. coli K-12, without an O antigen but with an intact LPS core, bound seven MAbs. When assayed against a series of rfa E. coli K-12 mutants, the number of MAbs that recognized porin surface epitopes increased sequentially as the LPS core became shorter. A total of 17 MAbs bound porin in a deep rough rfaD strain. Similar results were obtained with S. typhimurium. None of the anti-E. coli B/r porin MAbs adsorbed to a smooth strain, but three antibodies recognized porin on deep rough (rfaF, rfaE) mutants. These data define six distinct porin surface epitopes that are shielded by LPS from reaction with antibodies.

The first 28 amino acids of mature LamB are required for rapid and efficient export from the cytoplasm

Our laboratory has been utilizing the Escherichia coli outer membrane protein LamB to study the mechanism of protein localization. Various lines of evidence suggest that, in addition to a signal sequence, regions within the mature protein are required for efficient localization. In particular, studies using LamB-LacZ hybrid proteins have identified regions between amino acids 27 and 49 of mature LamB, which may play an important role in localization. To elucidate further the function of these regions, a series of in-frame deletions that remove varying lengths of early lamB sequences was constructed. The effects of these deletions on export of a large LamB-LacZ hybrid protein, 42-1, and on export of an otherwise wild-type LamB protein were determined. We find a strong correlation between the sequences deleted and the export phenotypes these deletions impart to both LamB and the LamB-LacZ42-1 hybrid protein. On the basis of these findings, the deletions can be divided into several distinct classes that define a region within mature LamB that participates in localization. This region extends amino terminally from amino acid 28 of the mature protein and functions in the rapid and efficient localization of LamB from the cytoplasm.

Translational control of exported proteins in Escherichia coli

We recently described the suppression of export of a class of periplasmic proteins of Escherichia coli caused by overproduction of a C-terminal truncated periplasmic enzyme (GlpQ'). This truncated protein was not released into the periplasm but remained attached to the inner membrane and was accessible from the periplasm. The presence of GlpQ' in the membrane strongly reduced the appearance in the periplasm of some periplasmic proteins, including the maltose-binding protein (MBP), but did not affect outer membrane proteins, including the lambda receptor (LamB) (R. Hengge and W. Boos, J. Bacteriol., 162:972-978, 1985). To investigate this phenomenon further we examined the fate of MBP in comparison with the outer membrane protein LamB. We found that not only localization but also synthesis of MBP was impaired, indicating a coupling of translation and export. Synthesis and secretion of LamB were not affected. The possibility that this influence was exerted via the level of cyclic AMP could be excluded. Synthesis of MBP with altered signal sequences was also reduced, demonstrating that export-defective MBP which ultimately remains in the cytoplasm abortively enters the export pathway. When GlpQ' was expressed in a secA51(Ts) strain, the inhibition of MBP synthesis caused by GlpQ' was dominant over the precursor accumulation usually caused by secA51(Ts) at 41 degrees C. Therefore, GlpQ' acts before or at the level of recognition by SecA. For LamB the usual secA51(Ts) phenotype was observed. We propose a mechanism by which GlpQ' blocks an yet unknown membrane protein, the function of which is to couple translation and export of a subclass of periplasmic proteins.

Outer-membrane permeability of bacteria

Gram-negative bacteria evolved to survive under the conditions in which a number of hazardous compounds are abundant. The outer membrane which protects the cell interior acts as a barrier against such hazardous agents, yet the cells must incorporate the chemicals that are essential for the cellular activity. The devices that Gram-negative bacteria developed to incorporate such essence are the transmembrane pores. These pores could be subdivided into three categories: (1) pore made of porins has a weak solute selectivity; (2) pore made of lamB protein and tsx proteins hold intermediate solute specificity. and (3) pores for the diffusion of vitamin B12 and ferric ion-chelator complexes have a tight solute specificity. Porins are identified from a number of Gram-negatives and from the outer membrane of mitochondria of various sources. Studies on the diffusion properties of these outer-membrane proteins provided essential information to understand membrane transports.

Protein translocation across and integration into membranes

This review concentrates mainly on the translocation of proteins across the endoplasmic reticulum membrane and cytoplasmic membrane in bacteria. It will start with a short historical review and will pinpoint the crucial questions in the field. Special emphasis will be given to the present knowledge on the molecular details of the first steps, i.e., on the function of the signal recognition particle and its receptor. The knowledge on the signal peptidase and the ribosome receptor(s) will also be summarized. The various models for the translocation of proteins across and the integration of proteins into membranes will be critically discussed. In particular, the function of signal, stop-transfer, and insertion sequences will be dealt with and molecular differences discussed. The cotranslational mode of membrane transfer will be compared with the post-translational transport found for mitochondria and chloroplasts. This review will conclude with open questions and an outlook.

Locating a nucleotide-binding site in the thymidine kinase of vaccinia virus and of herpes simplex virus by scoring triply aligned protein sequences

Computer techniques were used to locate related segments of amino acid sequences in the thymidine kinases of vaccinia virus and of herpes simplex virus type 1 and in porcine adenylate kinase. As determined by a procedure that evaluates triply aligned sequences, the probability that the similarities among the segments described here arose by chance was no greater than 0.001. Because the sequence in porcine adenylate kinase is a nucleotide phosphate-binding site it is concluded that the segments in the vaccinia virus and herpes simplex virus thymidine kinases perform similar functions. The segments are residues 16-23 in porcine adenylate kinase, 11-19 in vaccinia virus thymidine kinase, and 56-64 in herpes simplex virus thymidine kinase.

Defective secretion of maltose- and ribose-binding proteins caused by a truncated periplasmic protein in Escherichia coli

The secretion in Escherichia coli of a C-terminally truncated periplasmic enzyme from Salmonella typhimurium, the glpQ-encoded glycerolphosphate phosphodiesterase, was studied. Plasmid pRH100, carrying the truncated glpQ gene, directs the synthesis of a 30,000-molecular-weight (30 K) protein that is processed to a mature 27.5 K protein. (The mature wild-type protein is a 38 K protein.) The truncated protein is not released into the periplasm but remains membrane associated, although it becomes protease sensitive after conversion of cells to spheroplasts. The presence of pRH100 strongly reduces the amount of some other proteins in the periplasm, including the maltose- and ribose-binding proteins. The reduction does not occur at the level of transcription or early translation, as shown by lacZ fusions to the gene coding for the structural gene of the maltose-binding protein. Outer membrane proteins are not affected. A hydroxylamine-induced mutation in the sequence of glpQ corresponding to the mature polypeptide overcomes the inhibitory effect of pRH100. The mutated gene no longer directs the synthesis of the 30/27.5 K protein but directs that of a new 19 K protein which is not membrane bound. We propose that sorting signals in the mature GIpQ protein are necessary for effective translocation to the periplasm and that the C-terminal third of the protein is essential for release into the periplasm.

Nucleotide sequence of the gene for the vitamin B12 receptor protein in the outer membrane of Escherichia coli

The nucleotide sequence of a 2220-base-pair fragment containing the btuB gene of Escherichia coli was determined. There was a single open reading frame which was translated into a 614-amino-acid polypeptide, the first 20 amino acids of which comprised a typical leader sequence. The putative mature or processed form had a molecular weight (66,400) and a composition in close agreement with that determined for the purified receptor. The distribution of amino acids in the receptor protein was similar to that of other outer membrane proteins, showing a fairly even distribution of charged residues and the absence of extensive hydrophobic stretches. The btuB451 mutation appears to alter the receptor to eliminate its ability to function in vitamin B12 uptake without affecting its ligand binding properties. The sequence of the DNA from this mutant was determined and revealed a leucine-to-proline (C-to-T transition) change in the eighth amino acid of the mature form.

Porin from bacterial and mitochondrial outer membranes

The outer membrane of gram-negative bacteria acts as a molecular filter with defined exclusion limit for hydrophilic substances. The exclusion limit is dependent on the type of bacteria and has for enteric bacteria like Escherichia coli and Salmonella typhimurium a value between 600 and 800 Daltons, whereas molecules with molecular weights up to 6000 can penetrate the outer membrane of Pseudomonas aeruginosa. The molecular sieving properties result from the presence of a class of major proteins called porins which form trimers of identical subunits in the outer membrane. The porin trimers most likely contain only one large but well-defined pore with a diameter between 1.2 and 2 nm. Mitochondria are presumably descendents of gram-negative bacteria. The outer membrane of mitochondria contains in agreement with this hypothesis large pores which are permeable for hydrophilic substances with molecular weights up to 6000. The mitochondrial porins are processed by the cell and have molecular weights around 30,000 Daltons. There exists some evidence that the pore is controlled by electric fields and metabolic processes.

Intragenic regions required for LamB export

Escherichia coli strains containing a series of lamB-lacZ fusions have been isolated and characterized. Each of these fusions specifies a hybrid protein with LamB sequences at the NH2 terminus and a large functional COOH-terminal fragment of beta-galactosidase. The amount of LamB present in the various hybrid proteins ranges from as few as 4 amino acids to a complete signal sequence (25 amino acids) plus 49 amino acids of the mature protein. With respect to hybrid protein export these fusions fall into three classes. Hybrid proteins with an incomplete LamB signal sequence or those that have a complete signal sequence plus 27 or fewer amino acids of the mature LamB protein are not exported and remain in the cytoplasm. In contrast, fusion strains attempt to export hybrid proteins that contain a complete signal sequence plus 39 or 43 amino acids of mature LamB. However, these proteins are not localized to the outer membrane. Finally, a hybrid protein that is slightly larger, containing 49 amino acids of mature LamB, is found in the outer membrane in appreciable amounts. These fusions, together with previously described lamB-lacZ fusions, have enabled us to define more precisely the minimal amount of lamB required to initiate the process of protein export. Moreover, they genetically locate a signal that appears to guide LamB to the outer membrane. This signal is within a region of amino acid homology shared by other major outer membrane proteins [ Nikaido , H. & Wu, H. C. P. (1984) Proc. Natl. Acad. Sci. USA 81, 1048-1052].