A fourth class of theta-replicating plasmids: the pAM beta 1 family from gram-positive bacteria

Easy-Curing and pH-Regulated CRISPR-Cas9 Plasmids for Gene Editing and Plasmid Curing in Lactococcus cremoris

In this work, we developed a plasmid-based CRISPR-Cas9 strategy for editing Lactococcus cremoris, which allows easy generation of plasmid-free strains with the desired modification. We constructed versatile shuttle vectors based on the theta-type pAMβ1 promiscuous replicon and p15A ori, expressing both the Cas9 nuclease gene (under pH-regulated promoters derived from P170) and a single-guide RNA for specific targeting (under a strong constitutive promoter). The vectors designed for plasmid targeting were very effective for low- and high-copy-number plasmid curing in L. cremoris, and their targeting efficiency was shown to be tunable by regulating cas9 expression. For chromosome editing, we implemented a host-independent method that enhances double-homologous recombination events using plasmids expressing the genes encoding λRed-phage Redβ recombinase and Escherichia coli single-stranded DNA binding protein (EcSSB). By coupling either the endogenous recombination machinery or the Redβ-EcSSB-assisted recombination system with our novel chromosome-targeting CRISPR-Cas9 plasmids, we efficiently generated and selected thousands of gene-edited cells. Examination of the impact of the constructed CRISPR-Cas9 vectors on host fitness revealed no Cas9-associated toxicity, and, remarkably, these vectors exhibited a very high loss rate when growing the bacterial host cells in the absence of selective pressure.

Resistance and genomic characterization of a plasmid pkh2101 harbouring erm(B) isolated from emerging fish pathogen Lactococcus garvieae serotype II in Japan

The emergence of antibiotic-resistant pathogenic strains of Lactococcus garvieae serotype II isolated from fish in Japan has become a growing concern in recent years. The data on drug susceptibility and its associated resistance mechanism are limited. Therefore, the present study was conducted to determine the minimum inhibitory concentrations (MICs) of chemotherapeutic agents against 98 pathogenic strains of emerging Lactococcus garvieae serotype II isolated from fish from six different prefectures in Japan from 2018 to 2021. The tested strains were resistant to erythromycin, lincomycin and tiamulin. PCR amplification revealed the presence of erm(B) in all erythromycin-resistant strains, while a conjugation experiment confirmed that these strains carried erm(B) that could be transferred to recipient Enterococcus faecalis OG1RF with frequencies from 10^-4 to 10^-6 per donor cells. Nucleotide sequencing of the representative isolated plasmid pkh2101 from an erythromycin-resistant strain showed that it was a 26,850 bp molecule with an average GC content of 33.49%, comprising 31 CDSs, 13 of which remained without any functional annotation. Comparative genomic analysis suggested that pkh2101 shared the highest similarity (97.57% identity) with the plasmid pAMbeta1, which was previously isolated clinically from Enterococcus faecalis DS-5. This study provides potential evidence that the plasmid harbouring erm(B) could be a source of antibiotic resistance transmission in emerging L. garvieae infection in aquaculture.

Molecular characterization of five novel plasmids from Enterococcus italicus SD1 isolated from fermented milk: An insight into understanding plasmid incompatibility

Enterococcal plasmids have attracted considerable interest because of their indispensable role in the pathogenesis and dissemination of multidrug-resistance. In this work, five novel plasmids pSRB2, pSRB3, pSRB4, pSRB5 and pSRB7 have been identified and characterised, coexisting in Eneterococcus italicus SD1 from fermented milk. The plasmids pSRB2, pSRB3 and pSRB5 were found to replicate via theta mode of replication while pSRB4 and pSRB7 were rolling-circle plasmids. Comparative analysis of SD1-plasmids dictated that the plasmids are mosaic with novel architecture. Plasmids pSRB2 and pSRB5 are comprised of a typical iteron-based class-A theta type origin of replication, whereas pSRB3 has a Class-D theta type replication origin like pAMβ1. The plasmids pSRB4 and pSRB7 shared similar ori as in pWV01. The SD1 class-A theta type plasmids shared significant homology between their replication proteins with differences in their DNA-binding domain and comprises of distinct iterons. The differences in their iterons and replication proteins restricts the "handcuff" formation for inhibition of plasmid replication, rendering to their compatibility to coexist. Similarly, for SD1 rolling circle plasmids the differences in the replication protein binding site in the origin and the replication protein supports their coexistence by inhibiting the crosstalk between the origins and replication proteins. The phylogenetic tree of their replication proteins revealed their distant kinship. The results indicate that the identified plasmids are unique to E. italicus SD1, providing further opportunities to study their utility in designing multiple gene expression systems for the simultaneous production of proteins in enterococci with the renewed concept of plasmid incompatibility.

Characterization of a novel theta-type replicon of indigenous plasmid pTE15 from Lactobacillus reuteri N16

BACKGROUND

pTE15 is a ~ 15-kb narrow-host-range indigenous plasmid from Lactobacillus reuteri N16 that does not replicate in selected Bacillus spp., Staphylococcus spp., and other Lactobacillus spp.

METHODS

Combined deletion analysis the minireplicon essential of pTE15 with replicon-probe vector pUE80 (-) to confirmed sufficient for replication and from the ssDNA intermediate detection, plasmid amplification tested by chloramphenicol treatment, and replication origin sequence analysis to delineated the novel theta-type replication of pTE15.

RESULTS

Single-stranded intermediate of pTE15 DNA was not detected in L. reuteri, indicating that this plasmid does not replicate via a rolling circle mechanism. The replicon of pTE15 did not display the structural organization typical of rolling-circle plasmids, nor were they similar to known rolling-circle plasmids. We further provided evidence that this plasmid applied a new mode of theta-type replication mechanism: (1) the size of this plasmid was > 10-kb; (2) the minireplicon consisted of AT-rich (directed repeat, iteron) and DnaA sequences; (3) the minireplicon did not contain double-strand origin (DSO) and essential rep genes, and it also showed no single-strand origin (SSO) structure; (4) the intermediate single-stranded DNA products were not observed for pTE15 replication; (5) the minireplicon did not contain a typical essential replication protein, Rep, (6) its copy number was decreased by chloramphenicol treatment, and (7) genes in pTE15 replication region encoded truncated RepA (TRepA), RepB and RepC, which were replication-associated proteins, but they were not essential for pTE15 replication.

CONCLUSIONS

Collectively, our results strongly suggested that the indigenous plasmid pTE15 of L. reuteri N16 belongs to a new class of theta replicons.

Plasmid-Based Gene Expression Systems for Lactic Acid Bacteria: A Review

Lactic acid bacteria (LAB) play a very vital role in food production, preservation, and as probiotic agents. Some of these species can colonize and survive longer in the gastrointestinal tract (GIT), where their presence is crucially helpful to promote human health. LAB has also been used as a safe and efficient incubator to produce proteins of interest. With the advent of genetic engineering, recombinant LAB have been effectively employed as vectors for delivering therapeutic molecules to mucosal tissues of the oral, nasal, and vaginal tracks and for shuttling therapeutics for diabetes, cancer, viral infections, and several gastrointestinal infections. The most important tool needed to develop genetically engineered LABs to produce proteins of interest is a plasmid-based gene expression system. To date, a handful of constitutive and inducible vectors for LAB have been developed, but their limited availability, host specificity, instability, and low carrying capacity have narrowed their spectrum of applications. The current review discusses the plasmid-based vectors that have been developed so far for LAB; their functionality, potency, and constraints; and further highlights the need for a new, more stable, and effective gene expression platform for LAB.

Cross-kingdom expression of synthetic genetic elements promotes discovery of metabolites in the human microbiome

Small molecules encoded by biosynthetic pathways mediate cross-species interactions and harbor untapped potential, which has provided valuable compounds for medicine and biotechnology. Since studying biosynthetic gene clusters in their native context is often difficult, alternative efforts rely on heterologous expression, which is limited by host-specific metabolic capacity and regulation. Here, we describe a computational-experimental technology to redesign genes and their regulatory regions with hybrid elements for cross-species expression in Gram-negative and -positive bacteria and eukaryotes, decoupling biosynthetic capacity from host-range constraints to activate silenced pathways. These synthetic genetic elements enabled the discovery of a class of microbiome-derived nucleotide metabolites-tyrocitabines-from Lactobacillus iners. Tyrocitabines feature a remarkable orthoester-phosphate, inhibit translational activity, and invoke unexpected biosynthetic machinery, including a class of "Amadori synthases" and "abortive" tRNA synthetases. Our approach establishes a general strategy for the redesign, expression, mobilization, and characterization of genetic elements in diverse organisms and communities.

Plasmidome of Listeria spp.-The repA-Family Business

Bacteria of the genus Listeria (phylum Firmicutes) include both human and animal pathogens, as well as saprophytic strains. A common component of Listeria spp. genomes are plasmids, i.e., extrachromosomal replicons that contribute to gene flux in bacteria. This study provides an in-depth insight into the structure, diversity and evolution of plasmids occurring in Listeria strains inhabiting various environments under different anthropogenic pressures. Apart from the components of the conserved plasmid backbone (providing replication, stable maintenance and conjugational transfer functions), these replicons contain numerous adaptive genes possibly involved in: (i) resistance to antibiotics, heavy metals, metalloids and sanitizers, and (ii) responses to heat, oxidative, acid and high salinity stressors. Their genomes are also enriched by numerous transposable elements, which have influenced the plasmid architecture. The plasmidome of Listeria is dominated by a group of related replicons encoding the RepA replication initiation protein. Detailed comparative analyses provide valuable data on the level of conservation of these replicons and their role in shaping the structure of the Listeria pangenome, as well as their relationship to plasmids of other genera of Firmicutes, which demonstrates the range and direction of flow of genetic information in this important group of bacteria.

Plasmid Replicons for the Production of Pharmaceutical-Grade pDNA, Proteins and Antigens by Lactococcus lactis Cell Factories

The Lactococcus lactis bacterium found in different natural environments is traditionally associated with the fermented food industry. But recently, its applications have been spreading to the pharmaceutical industry, which has exploited its probiotic characteristics and is moving towards its use as cell factories for the production of added-value recombinant proteins and plasmid DNA (pDNA) for DNA vaccination, as a safer and industrially profitable alternative to the traditional Escherichia coli host. Additionally, due to its food-grade and generally recognized safe status, there have been an increasing number of studies about its use in live mucosal vaccination. In this review, we critically systematize the plasmid replicons available for the production of pharmaceutical-grade pDNA and recombinant proteins by L. lactis. A plasmid vector is an easily customized component when the goal is to engineer bacteria in order to produce a heterologous compound in industrially significant amounts, as an alternative to genomic DNA modifications. The additional burden to the cell depends on plasmid copy number and on the expression level, targeting location and type of protein expressed. For live mucosal vaccination applications, besides the presence of the necessary regulatory sequences, it is imperative that cells produce the antigen of interest in sufficient yields. The cell wall anchored antigens had shown more promising results in live mucosal vaccination studies, when compared with intracellular or secreted antigens. On the other side, engineering L. lactis to express membrane proteins, especially if they have a eukaryotic background, increases the overall cellular burden. The different alternative replicons for live mucosal vaccination, using L. lactis as the DNA vaccine carrier or the antigen producer, are critically reviewed, as a starting platform to choose or engineer the best vector for each application.

Characterization of a novel theta-type plasmid pSM409 of Enterococcus faecium RME isolated from raw milk

Enterococcal plasmids have generated renewed interest for their indispensable role in pathogenesis and dissemination of multidrug-resistance. Recently, a novel plasmid pSM409 (4303-bp, GC% = 33.6%), devoid of antibiotic-resistance and virulence genes, has been identified in Enterococcus faecium RME, isolated from raw milk by us. pSM409 contains six open reading frames encoding a replication initiator protein (RepB) and five accessory proteins: antitoxin epsilon, bacteriocin immunity protein, HsdS, and two hypothetical proteins. Comparative sequence analysis of pSM409 reveals a mosaic pattern of similarity with different loci obtained from different theta plasmids, which dictates the plasmid to be heterogeneous or mosaic, possibly due to recombination. The pSM409 comprised of a typical theta-type origin of replication with four and a half direct repeats (iterons) of 22 nucleotides. The pSM409-RepB shared 76-82% homology with the RepB of reported theta plasmids from different genera, with dissimilarities mostly in its DNA-binding and C-terminal domain. The RepB sequence-based phylogenetic tree revealed its distinct position relative to the reported ones. The RepB grouped in the same clade has identical DNA-binding domains and their cognate iterons, possibly due to their sequence-specific interaction to initiate plasmid replication. Comparative analysis of the pSM409-iteron reveals that the repeats markedly differed from their closest homologues. This clade-specific relationship provides a new concept of classifying theta plasmids. The theta-type replicon identified in pSM409 has been found to be unique to E. faecium RME, prompting us to further investigate its utility as a vector for genetic manipulation of enterococci for health and industry.

Mechanisms of Theta Plasmid Replication in Enterobacteria and Implications for Adaptation to Its Host

Plasmids are autonomously replicating sequences that help cells adapt to diverse stresses. Theta plasmids are the most frequent plasmid class in enterobacteria. They co-opt two host replication mechanisms: replication at oriC, a DnaA-dependent pathway leading to replisome assembly (theta class A), and replication fork restart, a PriA-dependent pathway leading to primosome assembly through primer extension and D-loop formation (theta classes B, C, and D). To ensure autonomy from the host's replication and to facilitate copy number regulation, theta plasmids have unique mechanisms of replication initiation at the plasmid origin of replication (ori). Tight plasmid copy number regulation is essential because of the major and direct impact plasmid gene dosage has on gene expression. The timing of plasmid replication and segregation are also critical for optimizing plasmid gene expression. Therefore, we propose that plasmid replication needs to be understood in its biological context, where complex origins of replication (redundant origins, mosaic and cointegrated replicons), plasmid segregation, and toxin-antitoxin systems are often present. Highlighting their tight functional integration with ori function, we show that both partition and toxin-antitoxin systems tend to be encoded in close physical proximity to the ori in a large collection of Escherichia coli plasmids. We also propose that adaptation of plasmids to their host optimizes their contribution to the host's fitness while restricting access to broad genetic diversity, and we argue that this trade-off between adaptation to host and access to genetic diversity is likely a determinant factor shaping the distribution of replicons in populations of enterobacteria.

Nucleotide sequence and analysis of pRC12 and pRC18, two theta-replicating plasmids harbored by Lactobacillus curvatus CRL 705

The nucleotide sequences of plasmids pRC12 (12,342 bp; GC 43.99%) and pRC18 (18,664 bp; GC 34.33%), harbored by the bacteriocin-producer Lactobacillus curvatus CRL 705, were determined and analyzed. Plasmids pRC12 and pRC18 share a region with high DNA identity (> 83% identity between RepA, a Type II toxin-antitoxin system and a tyrosine integrase genes) and are stably maintained in their natural host L. curvatus CRL 705. Both plasmids are low copy number and belong to the theta-type replicating group. While pRC12 is a pUCL287-like plasmid that possesses iterons and the repA and repB genes for replication, pRC18 harbors a 168 amino acid replication protein affiliated to RepB, which was named RepB'. Plasmid pRC18 also possesses a pUCL287-like repA gene but it was disrupted by an 11 kb insertion element that contains RepB', several transposases/IS elements, and the lactocin Lac705 operon. An Escherichia coli / Lactobacillus shuttle vector, named plasmid p3B1, carrying the pRC18 replicon (i.e. repB' and replication origin), a chloramphenicol resistance gene and a pBluescript backbone, was constructed and used to define the host range of RepB'. Chloramphenicol-resistant transformants were obtained after electroporation of Lactobacillus plantarum CRL 691, Lactobacillus sakei 23K and a plasmid-cured derivative of L. curvatus CRL 705, but not of L. curvatus DSM 20019 or Lactococcus lactis NZ9000. Depending on the host, transformation efficiency ranged from 102 to 107 per μg of DNA; in the new hosts, the plasmid was relatively stable as 29-53% of recombinants kept it after cell growth for 100 generations in the absence of selective pressure. Plasmid p3B1 could therefore be used for cloning and functional studies in several Lactobacillus species.

Detection and characterization of a theta-replicating plasmid pLP60 from Lactobacillus plantarum PC518 by inverse PCR

Plasmid DNA of Lactobacillus plantarum PC518 was isolated by an improved method which contained a washing step for removing lysozyme. Three plasmid DNA libraries were constructed. A pair of outward primers was designed at both ends of the novel plasmid fragment obtained from plasmid DNA libraries, and the remainder of the circle plasmid was amplified by inverse PCR (iPCR). The whole sequence of plasmid was analyzed by the basic local alignment search tool, Tandem Repeats Finder, DNAMAN V6.0, DNASTAR and MEGA X software. The copy number was measured using quantitative real-time PCR. Plasmid extract showed 7 bands on agarose gel, indicating that L. plantarum PC518 contains multiple plasmids. The complete sequence of plasmid pLP60 was obtained by plasmid DNA libraries and iPCR. pLP60 is 6006 bp in length with a G + C content of 41.19 %, which encodes 8 open reading frames (ORFs). The ori site like theta-type could be located upstream of repB, which contains a short tandem repeats (sTR) and a long tandem repeats (lTR). RepB of pLP60 only had low similarity with Rep protein of known theta-type plasmids, but phylogenetic tree analysis showed that plasmids whose Rep proteins are similar to pLP60 have lTR at ori, and the conservativeness of lTR is consistent with similarity of Rep proteins, suggesting that RepB of pLP60 is a theta-replicating protein. So pLP60 was classified as class A of theta replication. The copy number of pLP60 was measured as 5 copies per cell by qPCR.

Plasmid Copy Number of pTRKH3 in Lactococcus lactis is Increased by Modification of the repDE Ribosome-Binding Site

Plasmids for DNA vaccination are exclusively produced in the Gram-negative Escherichia coli. One important drawback of this system is the presence of lipopolysaccharides. The generally recognized as safe Lactococcus lactis (L. lactis) would constitute a safer alternative for plasmid production. A key requirement for the establishment of a cost-effective L. lactis-based plasmid manufacturing is the availability of high-copy number plasmids. Unfortunately, the highest copy number reported in Gram-positive bacteria for the pAMβ1 replicon is around 100 copies. The purpose of this work is to engineer the repDE ribosome-binding site (RBS) of the pTRKH3 plasmid by site-directed mutagenesis in order to increase the plasmid copy number in L. lactis LMG19460 cells. The pTRKH3-b mutant is the most promising candidate, achieving 215 copies of plasmid per chromosome, a 3.5-fold increase when compared to the nonmodified pTRKH3, probably due to a stronger RBS sequence, a messenger RNA secondary structure that promotes the RepDE expression, an ideal intermediate amount of transcriptional repressors and the presence of a duplicated region that added an additional RBS sequence and one new in-frame start codon. pTRKH3-b is a promising high-copy number shuttle plasmid that will contribute to turn lactic acid bacteria into a safer and economically viable alternative as DNA vaccines producers.

A Dual-Replicon Shuttle Vector System for Heterologous Gene Expression in a Broad Range of Gram-Positive and Gram-Negative Bacteria

Origin of replication (ori in theta-replicating plasmids or dso in rolling circle replicating plasmids) initiates plasmid replication in a broad range of bacteria. These two kinds of plasmids were both identified in Streptococcus, a genus composed of both human commensal bacteria and pathogens with the ability to cause severe community-acquired infections, including meningitides, septicemia, and respiratory tract diseases. Given the important roles of Streptococcus in the exchange of genetic elements with other symbiotic microbes, the genotypes and phenotypes of both Streptococcus spp. and other symbiotic species could be changed during colonization of the host. Therefore, an improved plasmid system is required to study the functional, complicated, and changeable genomes of Streptococcus. In this study, a dual-replicon shuttle vector system named pDRE was constructed to achieve heterologous gene expression. The vector system contained theta replicon for Escherichia coli. The origin of rolling circle replicon was synthesized according to pMV158 in Gram-positive bacteria. By measuring the products of inserted genes at multiple cloning sites, the ability of this vector system in the replication and expression of heterologous genes was assessed in four Streptococcus and three other Gram-positive bacteria: Bacillus subtilis, Lactococcus lactis, and Staphylococcus aureus. The results showed that the newly constructed vector could simultaneously replicate and express heterologous genes in a broad range of Gram-positive and Gram-negative bacteria, thus providing a potentially powerful genetic tool for further functional analysis.

Replication of Staphylococcal Resistance Plasmids

The currently widespread and increasing prevalence of resistant bacterial pathogens is a significant medical problem. In clinical strains of staphylococci, the genetic determinants that confer resistance to antimicrobial agents are often located on mobile elements, such as plasmids. Many of these resistance plasmids are capable of horizontal transmission to other bacteria in their surroundings, allowing extraordinarily rapid adaptation of bacterial populations. Once the resistance plasmids have been spread, they are often perpetually maintained in the new host, even in the absence of selective pressure. Plasmid persistence is accomplished by plasmid-encoded genetic systems that ensure efficient replication and segregational stability during cell division. Staphylococcal plasmids utilize proteins of evolutionarily diverse families to initiate replication from the plasmid origin of replication. Several distinctive plasmid copy number control mechanisms have been studied in detail and these appear conserved within plasmid classes. The initiators utilize various strategies and serve a multifunctional role in (i) recognition and processing of the cognate replication origin to an initiation active form and (ii) recruitment of host-encoded replication proteins that facilitate replisome assembly. Understanding the detailed molecular mechanisms that underpin plasmid replication may lead to novel approaches that could be used to reverse or slow the development of resistance.

Bacillus subtilis DNA polymerases, PolC and DnaE, are required for both leading and lagging strand synthesis in SPP1 origin-dependent DNA replication

Firmicutes have two distinct replicative DNA polymerases, the PolC leading strand polymerase, and PolC and DnaE synthesizing the lagging strand. We have reconstituted in vitro Bacillus subtilis bacteriophage SPP1 θ-type DNA replication, which initiates unidirectionally at oriL. With this system we show that DnaE is not only restricted to lagging strand synthesis as previously suggested. DnaG primase and DnaE polymerase are required for initiation of DNA replication on both strands. DnaE and DnaG synthesize in concert a hybrid RNA/DNA ‘initiation primer’ on both leading and lagging strands at the SPP1 oriL region, as it does the eukaryotic Pol α complex. DnaE, as a RNA-primed DNA polymerase, extends this initial primer in a reaction modulated by DnaG and one single-strand binding protein (SSB, SsbA or G36P), and hands off the initiation primer to PolC, a DNA-primed DNA polymerase. Then, PolC, stimulated by DnaG and the SSBs, performs the bulk of DNA chain elongation at both leading and lagging strands. Overall, these modulations by the SSBs and DnaG may contribute to the mechanism of polymerase switch at Firmicutes replisomes.

Plasmid Replicons from Pseudomonas Are Natural Chimeras of Functional, Exchangeable Modules

Plasmids are a main factor for the evolution of bacteria through horizontal gene exchange, including the dissemination of pathogenicity genes, resistance to antibiotics and degradation of pollutants. Their capacity to duplicate is dependent on their replication determinants (replicon), which also define their bacterial host range and the inability to coexist with related replicons. We characterize a second replicon from the virulence plasmid pPsv48C, from Pseudomonas syringae pv. savastanoi, which appears to be a natural chimera between the gene encoding a newly described replication protein and a putative replication control region present in the widespread family of PFP virulence plasmids. We present extensive evidence of this type of chimerism in structurally similar replicons from species of Pseudomonas, including environmental bacteria as well as plant, animal and human pathogens. We establish that these replicons consist of two functional modules corresponding to putative control (REx-C module) and replication (REx-R module) regions. These modules are functionally separable, do not show specificity for each other, and are dynamically exchanged among replicons of four distinct plasmid families. Only the REx-C module displays strong incompatibility, which is overcome by a few nucleotide changes clustered in a stem-and-loop structure of a putative antisense RNA. Additionally, a REx-C module from pPsv48C conferred replication ability to a non-replicative chromosomal DNA region containing features associated to replicons. Thus, the organization of plasmid replicons as independent and exchangeable functional modules is likely facilitating rapid replicon evolution, fostering their diversification and survival, besides allowing the potential co-option of appropriate genes into novel replicons and the artificial construction of new replicon specificities.

Complete Sequence and Organization of pFR260, the INTA Fr7-4 Plasmid Harboring Insecticidal Genes

We report the complete sequence and analysis of pFR260, a novel megaplasmid of 260,595 bp from the <i>Bacillus thuringiensis</i> strain INTA Fr7-4 isolated in Argentina. It carries 7 insecticidal genes: 3 <i>cry8</i> copies previously reported, 2 <i>vip1,</i> and 2 <i>vip2</i>. Also, it carries a gene encoding a putative atypical Cry protein. These genes are arranged in a region of approximately 105 kbp in size with characteristics of a pathogenicity island with a potential coleopteran-specific insecticide profile. DNA strand composition asymmetry, as determined by GC skew analysis, and the presence of a Rep protein involved in the initiation of replication suggest a bidirectional <i>theta</i> mechanism of replication. In addition, many genes involved in conjugation and a CRISPR-Cas system were detected. The pFR260 sequence was deposited in GenBank under accession number KX258624.

Role of the ganSPQAB Operon in Degradation of Galactan by Bacillus subtilis

Bacillus subtilis possesses different enzymes for the utilization of plant cell wall polysaccharides. This includes a gene cluster containing galactan degradation genes (ganA and ganB), two transporter component genes (ganQ and ganP), and the sugar-binding lipoprotein-encoding gene ganS (previously known as cycB). These genes form an operon that is regulated by GanR. The degradation of galactan by B. subtilis begins with the activity of extracellular GanB. GanB is an endo-β-1,4-galactanase and is a member of glycoside hydrolase (GH) family 53. This enzyme was active on high-molecular-weight arabinose-free galactan and mainly produced galactotetraose as well as galactotriose and galactobiose. These galacto-oligosaccharides may enter the cell via the GanQP transmembrane proteins of the galactan ABC transporter. The specificity of the galactan ABC transporter depends on the sugar-binding lipoprotein, GanS. Purified GanS was shown to bind galactotetraose and galactotriose using thermal shift assay. The energy for this transport is provided by MsmX, an ATP-binding protein. The transported galacto-oligosaccharides are further degraded by GanA. GanA is a β-galactosidase that belongs to GH family 42. The GanA enzyme was able to hydrolyze short-chain β-1,4-galacto-oligosaccharides as well as synthetic β-galactopyranosides into galactose. Thermal shift assay as well as electrophoretic mobility shift assay demonstrated that galactobiose is the inducer of the galactan operon regulated by GanR. DNase I footprinting revealed that the GanR protein binds to an operator overlapping the -35 box of the σ(A)-type promoter of Pgan, which is located upstream of ganS IMPORTANCE: Bacillus subtilis is a Gram-positive soil bacterium that utilizes different types of carbohydrates, such as pectin, as carbon sources. So far, most of the pectin degradation systems and enzymes have been thoroughly studied in B. subtilis Nevertheless, the B. subtilis utilization system of galactan, which is found as the side chain of the rhamnogalacturonan type I complex in pectin, has remained partially studied. Here, we investigated the galactan utilization system consisting of the ganSPQAB operon and its regulator ganR This study improves our knowledge of the carbohydrate degradation systems of B. subtilis, especially the pectin degradation systems. Moreover, the galactan-degrading enzymes may be exploited for the production of galacto-oligosaccharides, which are used as prebiotic substances in the food industry.

DNA-Binding Proteins Regulating pIP501 Transfer and Replication

pIP501 is a Gram-positive broad-host-range model plasmid intensively used for studying plasmid replication and conjugative transfer. It is a multiple antibiotic resistance plasmid frequently detected in clinical Enterococcus faecalis and Enterococcus faecium strains. Replication of pIP501 proceeds unidirectionally by a theta mechanism. The minimal replicon of pIP501 is composed of the repR gene encoding the essential rate-limiting replication initiator protein RepR and the origin of replication, oriR, located downstream of repR. RepR is similar to RepE of related streptococcal plasmid pAMβ1, which has been shown to possess RNase activity cleaving free RNA molecules in close proximity of the initiation site of DNA synthesis. Replication of pIP501 is controlled by the concerted action of a small protein, CopR, and an antisense RNA, RNAIII. CopR has a dual function: It acts as transcriptional repressor at the repR promoter and, in addition, prevents convergent transcription of RNAIII and repR mRNA (RNAII), which indirectly increases RNAIII synthesis. CopR binds asymmetrically as a dimer at two consecutive binding sites upstream of and overlapping with the repR promoter. RNAIII induces transcriptional attenuation within the leader region of the repR mRNA (RNAII). Deletion of either control component causes a 10- to 20-fold increase of plasmid copy number, while simultaneous deletions have no additional effect. Conjugative transfer of pIP501 depends on a type IV secretion system (T4SS) encoded in a single operon. Its transfer host-range is considerably broad, as it has been transferred to virtually all Gram-positive bacteria including Streptomyces and even the Gram-negative Escherichia coli. Expression of the 15 genes encoding the T4SS is tightly controlled by binding of the relaxase TraA, the transfer initiator protein, to the operon promoter overlapping with the origin of transfer (oriT). The T4SS operon encodes the DNA-binding proteins TraJ (VirD4-like coupling protein) and the VirB4-like ATPase, TraE. Both proteins are actively involved in conjugative DNA transport. Moreover, the operon encodes TraN, a small cytoplasmic protein, whose specific binding to a sequence upstream of the oriT nic-site was demonstrated. TraN seems to be an effective repressor of pIP501 transfer, as conjugative transfer rates were significantly increased in an E. faecalis pIP501ΔtraN mutant.

Plasmid Replication Control by Antisense RNAs

Plasmids are selfish genetic elements that normally constitute a burden for the bacterial host cell. This burden is expected to favor plasmid loss. Therefore, plasmids have evolved mechanisms to control their replication and ensure their stable maintenance. Replication control can be either mediated by iterons or by antisense RNAs. Antisense RNAs work through a negative control circuit. They are constitutively synthesized and metabolically unstable. They act both as a measuring device and a regulator, and regulation occurs by inhibition. Increased plasmid copy numbers lead to increasing antisense-RNA concentrations, which, in turn, result in the inhibition of a function essential for replication. On the other hand, decreased plasmid copy numbers entail decreasing concentrations of the inhibiting antisense RNA, thereby increasing the replication frequency. Inhibition is achieved by a variety of mechanisms, which are discussed in detail. The most trivial case is the inhibition of translation of an essential replication initiator protein (Rep) by blockage of the rep-ribosome binding site. Alternatively, ribosome binding to a leader peptide mRNA whose translation is required for efficient Rep translation can be prevented by antisense-RNA binding. In 2004, translational attenuation was discovered. Antisense-RNA-mediated transcriptional attenuation is another mechanism that has, so far, only been detected in plasmids of Gram-positive bacteria. ColE1, a plasmid that does not need a plasmid-encoded replication initiator protein, uses the inhibition of primer formation. In other cases, antisense RNAs inhibit the formation of an activator pseudoknot that is required for efficient Rep translation.

The Interplay between Different Stability Systems Contributes to Faithful Segregation: Streptococcus pyogenes pSM19035 as a Model

The Streptococcus pyogenes pSM19035 low-copy-number θ-replicating plasmid encodes five segregation (seg) loci that contribute to plasmid maintenance. These loci map outside of the minimal replicon. The segA locus comprises β2 recombinase and two six sites, and segC includes segA and also the γ topoisomerase and two ssiA sites. Recombinase β2 plays a role both in maximizing random segregation by resolving plasmid dimers (segA) and in catalyzing inversion between two inversely oriented six sites. segA, in concert with segC, facilitates replication fork pausing at ssiA sites and overcomes the accumulation of "toxic" replication intermediates. The segB1 locus encodes ω, ε, and ζ genes. The short-lived ε2 antitoxin and the long-lived ζ toxin form an inactive ζε2ζ complex. Free ζ toxin halts cell proliferation upon decay of the ε2 antitoxin and enhances survival. If ε2 expression is not recovered, by loss of the plasmid, the toxin raises lethality. The segB2 locus comprises δ and ω genes and six parS sites. Proteins δ2 and ω2, by forming complexes with parS and chromosomal DNA, pair the plasmid copies at the nucleoid, leading to the formation of a dynamic δ2 gradient that separates the plasmids to ensure roughly equal distribution to daughter cells at cell division. The segD locus, which comprises ω2 (or ω2 plus ω22) and parS sites, coordinates expression of genes that control copy number, better-than-random segregation, faithful partition, and antibiotic resistance. The interplay of the seg loci and with the rep locus facilitates almost absolute plasmid stability.

Plasmids from Food Lactic Acid Bacteria: Diversity, Similarity, and New Developments

Plasmids are widely distributed in different sources of lactic acid bacteria (LAB) as self-replicating extrachromosomal genetic materials, and have received considerable attention due to their close relationship with many important functions as well as some industrially relevant characteristics of the LAB species. They are interesting with regard to the development of food-grade cloning vectors. This review summarizes new developments in the area of lactic acid bacteria plasmids and aims to provide up to date information that can be used in related future research.

Antisense-RNA mediated control of plasmid replication - pIP501 revisited

Over the past decade, a wealth of small noncoding RNAs (sRNAs) have been discovered in the genomes of almost all bacterial species, where they constitute the most abundant class of posttranscriptional regulators. These sRNAs are key-players in prokaryotic metabolism, stress response and virulence. However, the first bona-fide antisense RNAs had been found already in 1981 in plasmids, where they regulate replication or maintenance. Antisense RNAs involved in plasmid replication control - meanwhile investigated in depth for almost 35 years - employ a variety of mechanisms of action: They regulate primer maturation, inhibit translation of essential replication initiator proteins (Rep proteins) as well as leader peptides or the formation of activator pseudoknots required for efficient rep translation. Alternatively they attenuate transcription or translation of rep mRNAs. Some antisense RNAs collaborate with transcriptional repressors to ensure proper copy-number control. Here, I summarize our knowledge on replication control of the broad-host range plasmid pIP501 that was originally isolated from Streptococcus agalactiae. Plasmid pIP501 uses two copy number-control elements, RNAIII, a cis-encoded antisense RNA, and transcriptional repressor CopR. RNA III mediates transcription attenuation, a rather widespread concept that found its culmination in the recent discovery of riboswitches. A peculiarity of pIP501 is the unusual stability of RNA III, which requires a second function of CopR: CopR does not only repress transcription from the essential repR promoter, but also prevents convergent transcription between rep mRNA and RNAIII, thereby indirectly increasing the amount of RNAIII. The concerted action of these two control elements is necessary to prevent plasmid loss at dangerously low copy numbers.

Identification of a replication initiation protein of the pVV8 plasmid from Thermus thermophilus HB8

Recently, the extremely thermophilic bacterium Thermus thermophilus HB8 has been demonstrated to harbor a circular plasmid designated by pVV8 in addition to two well-known plasmids, pTT8 and pTT27, and its entire sequence has been determined. The absence of any obvious replication initiation gene in the 81.2 kb plasmid prompted us to isolate its minimum replicon. By in vivo replication assays with fragments deleted in a stepwise manner, a minimum replicon containing a single ORF, TTHV001, was identified. A protein encoded by TTHV001 showed no amino acid sequence similarity to other function-known proteins. As the results of in vivo and in vitro experiments strongly suggested that the TTHV001 protein was involved in the replication initiation of pVV8, the protein and the gene were referred to as RepV and repV, respectively. The RepV protein binds to an inverted repeat sequence within its own repV gene and then triggers the unwinding of the DNA duplex in an A + T-rich region located just downstream from the inverted repeat. The in vivo replication assays with minimum replicon mutants in the RepV binding site or the unwinding region demonstrated that the unwinding in the region by the RepV binding was essential for pVV8 replication initiation.

Construction of Escherichia coli-Arthrobacter-Rhodococcus shuttle vectors based on a cryptic plasmid from Arthrobacter rhombi and investigation of their application for functional screening

A cryptic plasmid from Arthrobacter rhombi PRH1, designated as pPRH, was sequenced and characterized. It was 5000 bp in length with a G+C content of 66 mol%. The plasmid pPRH was predicted to encode six putative open reading frames (ORFs), in which ORF2 and ORF3 formed the minimal replicon of plasmid pPRH and shared 55-61% and 60-69% homology, respectively, with the RepA and RepB proteins of reported rhodococcal plasmids. Sequence analysis revealed a typical ColE2-type ori located 45 bp upstream of the gene repA. Sequence and phylogenetic analysis led to the conclusion that pPRH is a representative of a novel group of pAL5000 subfamily of ColE2 family plasmids. Three shuttle vectors pRMU824, pRMU824Km and pRMU824Tc, encoding chloramphenicol resistance, were constructed. The latter two harboured additional antibiotic resistance genes kan and tet, respectively. All vectors successfully replicated in Escherichia coli, Arthrobacter and Rhodococcus spp. The vector pRMU824Km was employed for functional screening of 2-hydroxypyridine catabolism encoding genes from Arthrobacter sp. PY22. Sequence analysis of the cloned 6-kb DNA fragment revealed eight putative ORFs, among which hpyB gene encoded a putative monooxygenase.

Moonlighting role of a poly-gamma-glutamate synthetase component from Bacillus subtilis: insight into novel extrachromosomal DNA maintenance

The Bacillus subtilis structural gene pgsE was investigated as a tool for extrachromosomal DNA maintenance (EDM). It ameliorated the stability of high-copy-number vectors, regardless of whether they were derived from rolling-cycle or theta-mode replicons, without any selective pressure. This unique EDM phenomenon may occur via a trans-acting mechanism.

Plasmid pSM19035, a model to study stable maintenance in Firmicutes

pSM19035 is a low-copy-number theta-replicating plasmid, which belongs to the Inc18 family. Plasmids of this family, which show a modular organization, are functional in evolutionarily diverse bacterial species of the Firmicutes Phylum. This review summarizes our understanding, accumulated during the last 20 years, on the genetics, biochemistry, cytology and physiology of the five pSM19035 segregation (seg) loci, which map outside of the minimal replicon. The segA locus plays a role both in maximizing plasmid random segregation, and in avoiding replication fork collapses in those plasmids with long inverted repeated regions. The segB1 locus, which acts as the ultimate determinant of plasmid maintenance, encodes a short-lived epsilon(2) antitoxin protein and a long-lived zeta toxin protein, which form a complex that neutralizes zeta toxicity. The cells that do not receive a copy of the plasmid halt their proliferation upon decay of the epsilon(2) antitoxin. The segB2 locus, which encodes two trans-acting, ParA- and ParB-like proteins and six cis-acting parS centromeres, actively ensures equal or roughly equal distribution of plasmid copies to daughter cells. The segC locus includes functions that promote the shift from the use of DNA polymerase I to the replicase (PolC-PolE DNA polymerases). The segD locus, which encodes a trans-acting transcriptional repressor, omega(2), and six cis-acting cognate sites, coordinates the expression of genes that control copy number, better-than-random segregation and partition, and assures the proper balance of these different functions. Working in concert the five different loci achieve almost absolute plasmid maintenance with a minimal growth penalty.

Vectors for Lactobacilli and other Gram-positive bacteria based on the minimal replicon of pRV500 from Lactobacillus sakei

The low-copy-number plasmid pRV500, belonging to the pUCL287 group of theta-type plasmids, was previously isolated from Lactobacillus sakei and characterized. We show here that the replicon of this plasmid enables replication also in Enterococcus faecalis and Bacillus subtilis but not in Lactococcus lactis. A 1.25 kb region encompassing the iterons and the repA gene was sufficient for replication, copy-number control and relative stable maintenance in L. sakei. Functional implications of host or plasmid-borne factors in the maintenance of pUCL287-type plasmids are discussed. The minimal replicon from pRV500 was fused to pBluescript for constructing the shuttle E. coli/lactobacilli cloning vector pRV610. pRV610 enables the white/blue lacZ alpha-complementation in E. coli. The cassettes for selection (erythromycin resistance) and replication (iterons and repA gene) are each bordered by unique restriction sites for easy replacement if needed. Derivatives in which chloramphenicol or tetracycline resistance replaced erythromycin resistance were constructed. In order to allow inducible gene expression, a copper-inducible promoter was placed on the pRV613 derivative. Expression of the downstream reporter gene lacZ was shown to be induced by 30 microM CuSO(4).

Molecular analysis of the replication region of the pCIZ2 plasmid from the multiple bacteriocin producer strain Enterococcus faecium L50

The sequence analysis of the 7383 bp plasmid pCIZ2 from Enterococcus faecium L50 enabled the identification of a DNA region involved in its replication. The structural organization of the pCIZ2 replication region is highly similar to those of well-known theta-replicating plasmids. It contains an untranslated region, the putative replication origin (ori), constituted by two sets of direct repeats of 12 and 22 bp (iterons), and followed by three open-reading frames (orf8 to orf10). orf8 encodes the replication initiation protein (RepE). The transcriptional start site of the replication locus was identified 13 nucleotides upstream of the repE start codon. A two-dimensional agarose gel electrophoresis analysis revealed pCIZ2 intermediates profile typical of the theta-type replication mechanism. Subcloning of different DNA fragments of the pCIZ2 replication region in Escherichia coli and, subsequently, in the plasmidless E. faecium L50/14-2 allowed the determination of the minimal replicon on a 1.2kb DNA fragment containing only the overall ori and repE which also act in trans. The involvement of orf9 in the plasmid copy number and in the plasmid stability was investigated. The pCIZ2 recombinant plasmids constitute narrow-host range shuttle cloning vectors (E. coli-E. faecium) that could be very useful for enterococcal genes studies, allowing an easy identification due to their histochemical recognition.

pEOC01: A plasmid from Pediococcus acidilactici which encodes an identical streptomycin resistance (aadE) gene to that found in Campylobacter jejuni

The complete nucleotide sequence of pEOC01, a plasmid (11,661 bp) from Pediococcus acidilactici NCIMB 6990 encoding resistance to clindamycin, erythromycin, and streptomycin was determined. The plasmid, which also replicates in Lactococcus and Lactobacillus species contains 16 putative open reading frames (ORFs), including regions annotated to encode replication, plasmid maintenance and multidrug resistance functions. Based on an analysis the plasmid replicates via a theta replicating mechanism closely related to those of many larger Streptococcus and Enterococcus plasmids. Interestingly, genes homologous to a toxin/antitoxin plasmid maintenance system are present and are highly similar to the omega-epsilon-zeta operon of Streptococcus plasmids. The plasmid contains two putative antibiotic resistance homologs, an ermB gene encoding erythromycin and clindamycin resistance, and a streptomycin resistance gene, aadE. Of particular note is the aadE gene which holds 100% identity to an aadE gene found in Campylobacter jejuni plasmid but which probably originated from a Gram-positive source. This observation is significant in that it provides evidence for recent horizontal transfer of streptomycin resistance from a lactic acid bacterium to a Gram-negative intestinal pathogen and as such infers a role for such plasmids for dissemination of antibiotic resistance genes possibly in the human gut.

A Bacillus anthracis-based in vitro system supports replication of plasmid pXO2 as well as rolling-circle-replicating plasmids

Capsule-encoding virulence plasmid pXO2 of Bacillus anthracis is predicted to replicate by a unidirectional theta-type mechanism. To gain a better understanding of the mechanism of replication of pXO2 and other plasmids in B. anthracis and related organisms, we have developed a cell-free system based on B. anthracis that can faithfully replicate plasmid DNA in vitro. The newly developed system was shown to support the in vitro replication of plasmid pT181, which replicates by the rolling-circle mechanism. We also demonstrate that this system supports the replication of plasmid pXO2 of B. anthracis. Replication of pXO2 required directional transcription through the plasmid origin of replication, and increased transcription through the origin resulted in an increase in plasmid replication.

Molecular characterization of a DNA fragment harboring the replicon of pBMB165 from Bacillus thuringiensis subsp. tenebrionis

BACKGROUND

Bacillus thuringiensis belongs to the Bacillus cereus sensu lato group of Gram-positive and spore-forming bacteria. Most isolates of B. thuringiensis can bear many endogenous plasmids, and the number and size of these plasmids can vary widely among strains or subspecies. As far as we know, the replicon of the plasmid pBMB165 is the first instance of a plasmid replicon being isolated from subsp. tenebrionis and characterized.

RESULTS

A 20 kb DNA fragment containing a plasmid replicon was isolated from B. thuringiensis subsp. tenebrionis YBT-1765 and characterized. By Southern blot analysis, this replicon region was determined to be located on pBMB165, the largest detected plasmid (about 82 kb) of strain YBT-1765. Deletion analysis revealed that a replication initiation protein (Rep165), an origin of replication (ori165) and an iteron region were required for replication. In addition, two overlapping ORFs (orf6 and orf10) were found to be involved in stability control of plasmid. Sequence comparison showed that the replicon of pBMB165 was homologous to the pAMbeta1 family replicons, indicating that the pBMB165 replicon belongs to this family. The presence of five transposable elements or remnants thereof in close proximity to and within the replicon control region led us to speculate that genetic exchange and recombination are potentially responsible for the divergence among the replicons of this plasmid family.

CONCLUSION

The replication and stability features of the pBMB165 from B. thuringiensis subsp. tenebrionis YBT-1765 were identified. Of particular interest is the homology and divergence shared between the pBMB165 replicon and other pAMbeta1 family replicons.

Minireplicon from pBtoxis of Bacillus thuringiensis subsp. israelensis

A 2.2-kb fragment containing a replicon from pBtoxis, the large plasmid that encodes the insecticidal endotoxins of Bacillus thuringiensis subsp. israelensis, was identified, cloned, and sequenced. This fragment contains cis elements, including iterons, found in replication origins of other large plasmids and suggests that pBtoxis replicates by a type A theta mechanism. Two genes, pBt156 and pBt157, encoding proteins of 54.4 kDa and 11.8 kDa, respectively, were present in an operon within this minireplicon, and each was shown by deletion analysis to be essential for replication. The deduced amino acid sequences of the 54.4-kDa and 11.8-kDa proteins showed no substantial homology with known replication (Rep) proteins. However, the 54.4-kDa protein contained a conserved FtsZ domain, and the 11.8 kDa protein contained a helix-turn-helix motif. As FtsZ proteins have known functions in bacterial cell division and the helix-turn-helix motif is present in Rep proteins, it is likely that these proteins function in plasmid replication and partitioning. The minireplicon had a copy number of two or three per chromosome equivalent in B. thuringiensis subsp. israelensis but did not replicate in B. cereus, B. megaterium, or B. subtilis. A plasmid constructed to synthesize large quantities of the Cry11A and Cyt1A endotoxins demonstrated that this minireplicon can be used to engineer vectors for cry and cyt gene expression.

Characterization of the theta-type plasmid pCD3.4 from Carnobacterium divergens, and modulation of its host range by RepA mutation

The complete nucleotide sequence of the 3475 bp plasmid pCD3.4 from Carnobacterium divergens LV13, which encodes the bacteriocin divergicin A, was determined. Nucleotide sequence, deletion and complementation analyses revealed the presence of a trans-acting replication protein, RepA, and DNA sequences involved in plasmid replication and copy-number control. The DNA region preceding the repA gene probably contains the origin of replication. This sequence includes four and a half direct repeats (iterons) of 22 bp, to which RepA is thought to bind, and an AT-rich region containing a 12 bp repeat, at which initiation of DNA might occur. Further upstream of this sequence resides a fifth iteron required for optimal plasmid replication. The RepA protein shows homology to replication proteins of the pUCL287 subfamily of theta-type replicons. Two ORFs were found downstream of the repA gene that could be deleted without affecting replication and stability of the plasmid. pCD3.4 has a narrow host range, and could only be maintained in Carnobacterium spp.; however, a mutant of the plasmid was obtained that enabled the pCD3.4 replicon to replicate in Enterococcus faecium, but not in Carnobacterium spp. The mutation was located in the C-terminal region of the RepA protein, changing a proline into a serine. This is believed to be the first example of such plasmid-host-range modulation in Gram-positive bacteria.

Creating new genes by plasmid recombination in Escherichia coli and Bacillus subtilis

Gene shuffling is a way of creating proteins with interesting new characteristics, starting from diverged sequences. We tested an alternative to gene shuffling based on plasmid recombination and found that Bacillus subtilis efficiently recombines sequences with 4% divergence, and Escherichia coli mutS is more appropriate for sequences with 22% divergence.

DNA polymerase I acts in translesion synthesis mediated by the Y-polymerases in Bacillus subtilis

Translesion synthesis (TLS) across damaged DNA bases is most often carried out by the ubiquitous error-prone DNA polymerases of the Y-family. Bacillus subtilis encodes two Y-polymerases, Pol Y1 and Pol Y2, that mediate TLS resulting in spontaneous and ultraviolet light (UV)-induced mutagenesis respectively. Here we show that TLS is a bipartite dual polymerase process in B. subtilis, involving not only the Y-polymerases but also the A-family polymerase, DNA polymerase I (Pol I). Both the spontaneous and the UV-induced mutagenesis are abolished in Pol I mutants affected solely in the polymerase catalytic site. Physical interactions between Pol I and either of the Pol Y polymerases, as well as formation of a ternary complex between Pol Y1, Pol I and the beta-clamp, were detected by yeast two- and three-hybrid assays, supporting the model of a functional coupling between the A- and Y-family polymerases in TLS. We suggest that the Pol Y carries the synthesis across the lesion, and Pol I takes over to extend the synthesis until the functional replisome resumes replication. This key role of Pol I in TLS uncovers a new function of the A-family DNA polymerases.

Conserved target for group II intron insertion in relaxase genes of conjugative elements of gram-positive bacteria

The lactococcal group II intron Ll.ltrB interrupts the ltrB relaxase gene within a region that encodes a conserved functional domain. Nucleotides essential for the homing of Ll.ltrB into an intronless version of ltrB are found exclusively at positions required to encode amino acids broadly conserved in a family of relaxase proteins of gram-positive bacteria. Two of these relaxase genes, pcfG from the enterococcal plasmid pCF10 and the ORF4 gene in the streptococcal conjugative transposon Tn5252, were shown to support Ll.ltrB insertion into the conserved motif at precisely the site predicted by sequence homology with ltrB. Insertion occurred through a mechanism indistinguishable from retrohoming. Splicing and retention of conjugative function was demonstrated for pCF10 derivatives containing intron insertions. Ll.ltrB targeting of a conserved motif of a conjugative element suggests a mechanism for group II intron dispersal among bacteria. Additional support for this mechanism comes from sequence analysis of the insertion sites of the E.c.I4 family of bacterial group II introns.

Isolation of a minireplicon of the virulence plasmid pXO2 of Bacillus anthracis and characterization of the plasmid-encoded RepS replication protein

A minireplicon of plasmid pXO2 of Bacillus anthracis was isolated by molecular cloning in Escherichia coli and shown to replicate in B. anthracis, Bacillus cereus, and Bacillus subtilis. The pXO2 replicon included (i) an open reading frame encoding the putative RepS replication initiation protein and (ii) the putative origin of replication. The RepS protein was expressed as a fusion with the maltose binding protein (MBP) at its amino-terminal end and purified by affinity chromatography. Electrophoretic mobility shift assays showed that the purified MBP-RepS protein bound specifically to a 60-bp region corresponding to the putative origin of replication of pXO2 located immediately downstream of the RepS open reading frame. Competition DNA binding experiments showed that the 5' and central regions of the putative origin were important for RepS binding. MBP-RepS also bound nonspecifically to single-stranded DNA with a lower affinity.

pB264, a small, mobilizable, temperature sensitive plasmid from Rhodococcus

BACKGROUND

Gram-positive bacteria of the genus Rhodococcus have shown an extraordinary capacity for metabolizing recalcitrant organic compounds. One hindrance to the full exploitation of Rhodococcus is the dearth of genetic tools available for strain manipulation. To address this issue, we sought to develop a plasmid-based system for genetic manipulation of a variety of Rhodococcus strains.

RESULTS

We isolated and sequenced pB264, a 4,970 bp cryptic plasmid from Rhodococcus sp. B264-1 with features of a theta-type replication mechanism. pB264 was nearly identical to pKA22, a previously sequenced but uncharacterized cryptic plasmid. Derivatives of pB264 replicate in a diverse range of Rhodococcus species, showing that this plasmid does not bear the same host range restrictions that have been exhibited by other theta replicating plasmids. Replication or maintenance of pB264 is inhibited at 37 degrees C, making pB264 useful as a suicide vector for genetic manipulation of Rhodococcus. A series of deletions revealed that ca. 1.3 kb from pB264 was sufficient to support replication and stable inheritance of the plasmid. This region includes two open reading frames that encode functions (RepAB) that can support replication of pB264 derivatives in trans. Rhodococcus sp. B264-1 will mobilize pB264 into other Rhodococcus species via conjugation, making it possible to genetically modify bacterial strains that are otherwise difficult to transform. The cis-acting element (oriT) required for conjugal transfer of pB264 resides within a ca. 0.7 kb region that is distinct from the regions responsible for replication.

CONCLUSION

Shuttle vectors derived from pB264 will be useful for genetic studies and strain improvement in Rhodococcus, and will also be useful for studying the processes of theta replication and conjugal transfer among actinomycetes.

A bacterial group II intron favors retrotransposition into plasmid targets

Group II introns, widely believed to be the ancestors of nuclear pre-mRNA introns, are catalytic RNAs found in bacteria, archaea, and eukaryotes. They are mobile genetic elements that move via an RNA intermediate. They retrohome to intronless alleles and retrotranspose to ectopic sites, aided by an intron-encoded protein with reverse transcriptase, maturase, and endonuclease activities. Many group II introns identified in bacteria reside on plasmid genomes rather than bacterial chromosomes, implying that plasmids are havens for these retroelements. This study demonstrates that almost one-fourth of retrotransposition events of the Ll.LtrB intron in Lactococcus lactis are into the plasmid donor. This level is more than twice that predicted based on target size and plasmid copy number relative to the chromosome. In particular, the fraction of such plasmid targeting events was elevated to more than one-third of retrotransposition events by mutation of the intron-encoded endonuclease, a situation that may resemble most bacterial group II introns, which lack the endonuclease. Target-site sequences on the plasmid are more relaxed than those on the chromosome, likely accounting for preferred integration into plasmid replicons. Furthermore, the direction of integration relative to promoters and origins of replication is consistent with group II intron retrotransposition into single-stranded DNA at replication forks. This work provides mechanistic rationales for the prevalence of group II introns in natural plasmid populations and underscores that targeting to plasmids, which are themselves mobile elements, could promote intron spread.

Characterization of a theta-type plasmid from Lactobacillus sakei: a potential basis for low-copy-number vectors in lactobacilli

The complete nucleotide sequence of the 13-kb plasmid pRV500, isolated from Lactobacillus sakei RV332, was determined. Sequence analysis enabled the identification of genes coding for a putative type I restriction-modification system, two genes coding for putative recombinases of the integrase family, and a region likely involved in replication. The structural features of this region, comprising a putative ori segment containing 11- and 22-bp repeats and a repA gene coding for a putative initiator protein, indicated that pRV500 belongs to the pUCL287 subfamily of theta-type replicons. A 3.7-kb fragment encompassing this region was fused to an Escherichia coli replicon to produce the shuttle vector pRV566 and was observed to be functional in L. sakei for plasmid replication. The L. sakei replicon alone could not support replication in E. coli. Plasmid pRV500 and its derivative pRV566 were determined to be at very low copy numbers in L. sakei. pRV566 was maintained at a reasonable rate over 20 generations in several lactobacilli, such as Lactobacillus curvatus, Lactobacillus casei, and Lactobacillus plantarum, in addition to L. sakei, making it an interesting basis for developing vectors. Sequence relationships with other plasmids are described and discussed.