Strand displacement amplification as an in vitro model for rolling-circle replication: deletion formation and evolution during serial transfer

LAMPrimers iQ: New primer design software for loop-mediated isothermal amplification (LAMP)

Nucleic acids amplification is a widely used technique utilized for different manipulations with DNA and RNA. Although, polymerase chain reaction (PCR) remains the most popular amplification method, isothermal approaches are gained more attention last decades. Among these, loop-mediated isothermal amplification (LAMP) became an excellent alternative to PCR. LAMP requires an increased number of primers and, therefore, is considered a highly specific amplification reaction compared to PCR. LAMP primers design is still a non-trivial task, and all niceties should be taken into account during their selection. Here, we report on a new program called LAMPrimers iQ destined for high-quality LAMP primers design. LAMPrimers iQ is based on an original algorithm considering rigorous criteria for primers selection. Unlike alternative programs, LAMPrimers iQ can process long DNA or RNA sequences, and completely avoid primers that can form homo- and heterodimers. The quality of the primers designed was checked using SARS-CoV-2 coronavirus RNA as a model target. It was shown that primers selected with LAMPrimers iQ provide higher specificity and reliable detection of viral RNA compared to those obtained by alternative programs. The program is available at https://github.com/Restily/LAMPrimers-iQ.

Graphene oxide assisted light-up aptamer selection against Thioflavin T for label-free detection of microRNA

We selected an aptamer against a fluorogenic dye called Thioflavin T (ThT). Aptamers are single-stranded DNA that can bind a specific target. We selected the ThT aptamer using graphene oxide assisted SELEX and a low-cost Open qPCR instrument. We optimized, minimized, and characterized the best aptamer candidate against ThT. The aptamer, ThT dye, and the enzymatic strand displacement amplification (SDA) were used in a label-free approach to detect the micro RNA miR-215 in saliva and serum. The aptamer confers higher specificity than intercalating dyes but without expensive covalently modified DNA probes. This isothermal, low-cost, simple method can detect both DNA and RNA. The target, miR-215, was detected with a limit of detection of 2.6 nM.

Flap endonuclease-initiated enzymatic repairing amplification for ultrasensitive detection of target nucleic acids

A new isothermal nucleic acid amplification method termed FERA (Flap endonuclease-initiated Enzymatic Repairing Amplification) is developed for the ultrasensitive detection of target nucleic acids. In the FERA method, flap endonuclease (FEN) catalyzes the hydrolytic cleavage at the junction of single- and double-stranded DNAs which is formed only in the presence of target nucleic acids, and releases short oligonucleotides to promote the cyclic enzymatic repairing amplification (ERA) combined with FEN-based amplification. As a result, a large amount of single- and double-stranded DNAs are generated under the isothermal conditions, leading to the high fluorescence intensity from the SYBR I green dye. Relying on the powerful amplification method, we successfully determined the target nucleic acids with a limit of detection as low as 15.16 aM, which corresponds to approximately 180 molecules in 20 μL reaction volume, and verified the practical applicability by detecting long target nucleic acids derived from Chlamydia trachomatis.

Automated in vitro evolution of a translation-coupled RNA replication system in a droplet flow reactor

Automation is a useful strategy to make laborious evolutionary experiments faster and easier. To date, several types of continuous flow reactors have been developed for the automated evolutionary experiments of viruses and bacteria. However, the development of a flow reactor applicable to compartmentalized in vitro self-replication systems is still a challenge. In this study, we demonstrate automated in vitro evolution of a translation-coupled RNA system in a droplet flow reactor for the first time. This reactor contains approximately 1010 micro-scale droplets (average diameter is approximately 0.8 μm), which continuously fuse and divide among each other at a controllable rate. In the droplets, an RNA (artificial genomic RNA) replicate through the translation of self-encoded RNA replicase with spontaneously appearing parasitic RNA. We performed two automated replication experiments for more than 400 hours with different mixing intensities. We found that several mutations displayed increased frequencies in the genomic RNA populations and the dominant RNA mutants acquired the ability to replicate faster or acquired resistance to the parasitic RNA, demonstrating that Darwinian evolution occurred during the long-term replication. The droplet flow reactor we developed can be a useful tool to perform in vitro evolutionary experiments of translation-coupled systems.

A DNA Circuit for IsomiR Detection

A synthetic DNA oligonucleotide has been programmed to function as a biological circuit to detect 5'-IsomiRs. The circuit consists of two integrated DNA switches. The first is "activated" when a DNA probe is enzymatically modified by a reverse transcriptase that incorporates nucleotides complementary to the 5'-region of a microRNA (miRNA). Addition of the correct number and sequence of nucleotides enables the probe to assemble into an asymmetric DNA hairpin. The reconfigured hairpin probe then primes an internal polymerisation reaction, resulting in the synthesis of a symmetrical DNA hairpin. This activates the second switch, which then initiates the amplification of reverse-transcribed miRNA through a continuous cycle of DNA nicking and polymerisation. The DNA circuit enables sensitive and rapid detection of femtomoles of a miRNA transcript under isothermal conditions.

Constructive Approaches for Understanding the Origin of Self-Replication and Evolution

The mystery of the origin of life can be divided into two parts. The first part is the origin of biomolecules: under what physicochemical conditions did biomolecules such as amino acids, nucleotides, and their polymers arise? The second part of the mystery is the origin of life-specific functions such as the replication of genetic information, the reproduction of cellular structures, metabolism, and evolution. These functions require the coordination of many different kinds of biological molecules. A direct strategy to approach the second part of the mystery is the constructive approach, in which life-specific functions are recreated in a test tube from specific biological molecules. Using this approach, we are able to employ design principles to reproduce life-specific functions, and the knowledge gained through the reproduction process provides clues as to their origins. In this mini-review, we introduce recent insights gained using this approach, and propose important future directions for advancing our understanding of the origins of life.

Kingdom-agnostic metagenomics and the importance of complete characterization of enteric microbial communities

Advanced sequencing techniques have shown that bacteria are not the only complex and important microbes in the human intestine. Nonbacterial organisms, particularly the virome and the mycobiome, are important regulators of intestinal immunity and inflammation. The virome is mucosal and systemic; it can alter the host response to bacteria and interact with host genes and bacteria to contribute to disease pathogenesis. The human mycobiome is also complex and can contribute to intestinal inflammation. We review what has recently been learned about the nonbacterial and nonarchaeal microbes in the gastrointestinal tract, discussing their potential effects on health and disease and analytical approaches for their study. Studies of associations between the microbiome and intestinal pathology should incorporate kingdom-agnostic approaches if we are to fully understand intestinal health and disease.

Real-time detection of isothermal amplification reactions with thermostable catalytic hairpin assembly

Catalytic hairpin assembly (CHA) is an enzyme-free amplification method that has previously proven useful in amplifying and transducing signals at the terminus of nucleic acid amplification reactions. Here, for the first time, we engineered CHA to be thermostable from 37 to 60 °C and in consequence have generalized its application to the real-time detection of isothermal amplification reactions. CHA circuits were designed and optimized for both high- and low-temperature rolling circle amplification (RCA) and strand displacement amplification (SDA). The resulting circuits not only increased the specificity of detection but also improved the sensitivity by as much as 25- to 10000-fold over comparable real-time detection methods. These methods have been condensed into a set of general rules for the design of thermostable CHA circuits with high signals and low noise.

Real-time monitoring of strand-displacement DNA amplification by a contactless electrochemical microsystem using interdigitated electrodes

This paper reports the design and implementation of a contactless conductivity detection system which combines a thermal control cell, a data processing system and an electrochemical (EC) cell for label-free isothermal nucleic acid amplification and real-time monitoring. The EC cell consists of a microchamber and interdigitated electrodes as the contactless conductivity biosensor with a cover slip as insulation. In our work, contactless EC measurements, the effects of trehalose on amplification, and chip surface treatment are investigated. With the superior performance of the biosensor, the device can detect the amount of pure DNA at concentrations less than 0.1 pg μl(-1). The EC cell, integrated with a heater and a temperature sensor, has successfully implemented nicking-based strand-displacement amplification at an initial concentration of 2.5 μM and the yields are monitored directly (dismissing the use of probes or labels) on-line. This contactless detector carries important advantages: high anti-interference capability, long detector life, high reusability and low cost. In addition, the small size, low power consumption and portability of the detection cell give the system the potential to be highly integrated for use in field service and point of care applications.

Linear nicking endonuclease-mediated strand-displacement DNA amplification

We describe a method for linear isothermal DNA amplification using nicking endonuclease-mediated strand displacement by a DNA polymerase. The nicking of one strand of a DNA target by the endonuclease produces a primer for the polymerase to initiate synthesis. As the polymerization proceeds, the downstream strand is displaced into a single-stranded form while the nicking site is also regenerated. The combined continuous repetitive action of nicking by the endonuclease and strand-displacement synthesis by the polymerase results in linear amplification of one strand of the DNA molecule. We demonstrate that DNA templates up to 5000 nucleotides can be linearly amplified using a nicking endonuclease with 7-bp recognition sequence and Sequenase version 2.0 in the presence of single-stranded DNA binding proteins. We also show that a mixture of three templates of 500, 1000, and 5000 nucleotides in length is linearly amplified with the original molar ratios of the templates preserved. Moreover, we demonstrate that a complex library of hydrodynamically sheared genomic DNA from bacteriophage lambda can be amplified linearly.

Detection of proteins based on amino acid sequences by multiple aptamers against tripeptides

A number of different ligands have been tested in the course of the development of protein array technology. The most extensively studied example of protein ligands has been based on antibody-antigen interaction. Other examples include protein-protein, protein-nucleic acid, and protein-small molecule interactions. All these ligands can recognize and specifically bind to protein epitopes. In this study, we have developed a novel technology using DNA-based aptamers to detect proteins based on their amino acid sequences. Mouse cathepsin D was used for the proof of principle experiment. Four tripeptides, Leu-Ala-Ser, Asp-Gly-Ile, Gly-Glu-Leu, and Lys-Ala-Ile, were selected based on the published amino acid sequence of mouse cathepsin D. DNA aptamers against the tripeptides were isolated using the systematic evolution of ligands of exponential enrichment method. We have demonstrated that the aptamers specifically interacted with mouse cathepsin D using the structure-switch method. We further performed a proximity-dependent ligation assay to demonstrate that multiple aptamers could specifically detect the protein from cell extracts. In principle, one library containing 8000 aptamers should be enough to detect almost all proteins in the whole proteome in all organisms. This technology could be applied to generate a new generation of protein arrays.

Optimization and design of oligonucleotide setup for strand displacement amplification

Several advantages of strand displacement amplification (SDA) as an all-purpose DNA amplification reaction are due to it isothermal mechanism. The major problem of isothermal amplification mechanism is the accumulation of non-predictable byproduct especially for longer incubation time and low concentrations of initial template DNA. New theoretical strategies to tackle the difficulties regarding the specificity of the reaction are experimentally verified. Besides improving the reaction conditions, the stringency of primer hybridization can be distinctly improved by computer based sequence prediction algorithms based on the thermodynamic stability of DNA hybrid a described by the partition function of the hybridization reaction. An alternative SDA mechanism, with sequences developed by this means is also investigated.

Method for manufacturing whole-genome microarrays by rolling circle amplification

Comparative genomic hybridization (CGH) to metaphase chromosomes is a method for genome-wide detection of chromosomal aberrations in DNA samples. Recent advances in microarray technology have improved CGH by replacing metaphase chromosomes with a collection of mapped genomic clones placed on glass slides. However, it is quite expensive and labor-intensive to prepare DNA from the genomic clones for use in constructing genomic microarrays. Here we used strand-displacement rolling circle amplification (RCA) to manufacture whole-genome microarrays by using a collection of about 4,500 mapped RPCI-11 BAC clones that cover the human genome at approximately a 1-Mb resolution. These genomic microarrays detected all major chromosomal aberrations in cancer cells lines and in cell lines with aneuploidy. In this article, we discuss the advantages of using RCA for the manufacturing of large genomic microarrays.

Large-scale SNP scoring from unamplified genomic DNA

Discoveries from the Human Genome Project (HGP) continue to spur changes in medical technology that will lead to new diagnostic procedures in the clinical lab. As more single nucleotide polymorphisms (SNPs) are discovered and correlated to human diseases, demands for genetic tests will increase. The enormity of the number of SNPs makes developing inexpensive and reliable high-throughput methods for SNP scoring imperative. High-throughput screening (HTS) means, at a minimum, a production rate of thousands of assays per day. Ideally, the technology will be easy, inexpensive and amenable to automation. The Invader assay offers a simple diagnostic platform to detect single nucleotide changes with high specificity and sensitivity from unamplified, genomic DNA. The Invader assay uses a structure-specific 5' nuclease (or flap endonuclease) to cleave sequence-specific structures in each of two cascading reactions. The cleavage structure forms when two synthetic oligonucleotide probes hybridise in tandem to a target. One of the probes cycles on and off the target and is cut by the nuclease only when the appropriate structure forms. These cleaved probes then participate in a second Invader reaction involving a dye-labelled fluorescence resonance energy transfer (FRET) probe. Cleavage of this FRET probe generates a signal, which can be readily analysed by fluorescence microtitre plate readers. The two cascading reactions amplify the signal significantly; each original target molecule can lead to more than 10(6) cleaved signal probes in one hour. This signal amplification permits identification of single base changes directly from genomic DNA without prior target amplification. The sequences of the oligonucleotide components of the secondary reaction are independent of the target of interest and permit the development of universal secondary reaction components useful to identify any target.

Modified oligonucleotides: synthesis and strategy for users

Synthetic oligonucleotide analogs have greatly aided our understanding of several biochemical processes. Efficient solid-phase and enzyme-assisted synthetic methods and the availability of modified base analogs have added to the utility of such oligonucleotides. In this review, we discuss the applications of synthetic oligonucleotides that contain backbone, base, and sugar modifications to investigate the mechanism and stereochemical aspects of biochemical reactions. We also discuss interference mapping of nucleic acid-protein interactions; spectroscopic analysis of biochemical reactions and nucleic acid structures; and nucleic acid cross-linking studies. The automation of oligonucleotide synthesis, the development of versatile phosphoramidite reagents, and efficient scale-up have expanded the application of modified oligonucleotides to diverse areas of fundamental and applied biological research. Numerous reports have covered oligonucleotides for which modifications have been made of the phosphodiester backbone, of the purine and pyrimidine heterocyclic bases, and of the sugar moiety; these modifications serve as structural and mechanistic probes. In this chapter, we review the range, scope, and practical utility of such chemically modified oligonucleotides. Because of space limitations, we discuss only those oligonucleotides that contain phosphate and phosphate analogs as internucleotidic linkages.

30 years later--a new approach to Sol Spiegelman's and Leslie Orgel's in vitro evolutionary studies. Dedicated to Leslie Orgel on the occasion of his 70th birthday

The conditions necessary for evolution are amplification, mutagenesis and selection. Here we describe the evolutionary response of an in vitro replicating system to the selection pressure for fast growth and show what happens to the amplified molecules within this replication system. Our emphasis is on methodology, on the monitoring and the automation of experiments in molecular evolution. In order to perform in vitro studies on the evolution of RNA molecules, a modified self-sustained sequence replication (3SR) method was used. In the first step of the 3SR reaction, the RNA template is reversely transcribed by HIV-1 reverse transcriptase, followed by a second strand synthesis and the transcription of the resulting dsDNA by T7 RNA polymerase. The selection pressure (fast growth) was achieved by applying the principle of serial transfer pioneered in the laboratories of Sol Spiegelman and Leslie Orgel. At the end of the exponential growth phase of the 3SR reaction, an aliquot of the reaction mixture is transferred into a new sample containing only buffer, nucleotides and enzymes while RNA template molecules are provided by the transfer. The conditions in the exponential growth phase allow the RNA molecules to be amplified in a constant environment; all enzymes (HIV-1 reverse transcriptase and T7 RNA polymerase) and nucleotides are present in large excess. Therefore, transferring reproducibly within the exponential growth phase is equivalent to selecting for fast growth; those molecules which can replicate faster will displace others after several transfers. The experiments were performed using a serial transfer apparatus (STA) which allows the nucleic acid concentration to be monitored on-line by measuring the laser-induced fluorescence caused by intercalation of thiazole orange monomers into the RNA/DNA amplification products. The serial transfer experiments were carried out with an RNA template (220b RNA) that represents a 220-base segment of the HIV-1 genome and comprises the in vivo primer binding site (PBS) for the HIV-1 reverse transcriptase. It could be shown that after only two serial transfers two RNA species (EP1 and EP2) emerged that were much shorter. EP1 (48b) and EP2 (54b) were formed by deletion mutations within the original 220b RNA template in the very beginning of the serial transfer experiment; due to their higher replication rate (calculated from the growth curves derived on-line) these two deletion mutants displaced the original 220b RNA template in the course of the following thirty transfers. We assume that these two RNA species evolved independently of each other. Their formation was probably induced by a strand-transfer reaction of HIV-1 reverse transcriptase. Sequence analyses of these two evolution products seem to confirm such a presented pathway. 30 years after Spiegelman's experiment, the study described here is another answer to the question he posed: 'How do molecules evolve if the only demand is the biblical injunction: multiply?'. The answer, derived from a modified 3SR amplification system (mimicking a part of the HIV-1 replication cycle in vitro), is the same as thirty years ago: The RNA molecules adapt to the new conditions by throwing away any ballast not needed for fast replication. Clearly, this is only one aspect of molecular evolution; however, it shows that we should be careful in designating unidentified genetic material as 'junk DNA'.

Monitoring the amplification of CATCH, a 3SR based cooperatively coupled isothermal amplification system, by fluorimetric methods

Three different types of fluorescence detection methods were employed to monitor amplification of a previously established isothermal cooperatively coupled amplification system as it can serve as a tool for the investigation of fundamental issues in evolutionary optimization. By using 5'IRD-41 fluorescent labeled primers, the intercalating dye TOPRO-1 and a 5'fluorescin/3'DABCYL 4-(4-dimethylamino-phenylazo)benzoic acid labeled ss 24 nt DNA, evolving molecular cooperation is accessible, sequence specifically as well as non-sequence-specifically without using radioactivity.

In vitro evolution of terminal protein-containing genomes

A new self-sustained terminal protein-primed DNA amplification system has been used to describe in vitro evolutionary changes affecting maintenance of the genome size of bacteriophage phi29. These changes involve generation and efficient amplification of short palindromic molecules containing an inverted duplication of one of the original DNA ends. A template-switching mechanism is proposed to account for the appearance of these molecules. After their formation, they would replicate by means of hairpin intermediates. Relevant kinetic information about this DNA replication system has been obtained from the competition between the input full-length phi29 DNA and its derived truncated versions. The physiological relevance of these molecules and the mechanisms to control their formation are discussed.