prlA suppressors in Escherichia coli relieve the proton electrochemical gradient dependency of translocation of wild-type precursors

Dynamic coupling of fast channel gating with slow ATP-turnover underpins protein transport through the Sec translocon

The Sec translocon is a highly conserved membrane assembly for polypeptide transport across, or into, lipid bilayers. In bacteria, secretion through the core channel complex-SecYEG in the inner membrane-is powered by the cytosolic ATPase SecA. Here, we use single-molecule fluorescence to interrogate the conformational state of SecYEG throughout the ATP hydrolysis cycle of SecA. We show that the SecYEG channel fluctuations between open and closed states are much faster (~20-fold during translocation) than ATP turnover, and that the nucleotide status of SecA modulates the rates of opening and closure. The SecY variant PrlA4, which exhibits faster transport but unaffected ATPase rates, increases the dwell time in the open state, facilitating pre-protein diffusion through the pore and thereby enhancing translocation efficiency. Thus, rapid SecYEG channel dynamics are allosterically coupled to SecA via modulation of the energy landscape, and play an integral part in protein transport. Loose coupling of ATP-turnover by SecA to the dynamic properties of SecYEG is compatible with a Brownian-rachet mechanism of translocation, rather than strict nucleotide-dependent interconversion between different static states of a power stroke.

The Dynamic SecYEG Translocon

The spatial and temporal coordination of protein transport is an essential cornerstone of the bacterial adaptation to different environmental conditions. By adjusting the protein composition of extra-cytosolic compartments, like the inner and outer membranes or the periplasmic space, protein transport mechanisms help shaping protein homeostasis in response to various metabolic cues. The universally conserved SecYEG translocon acts at the center of bacterial protein transport and mediates the translocation of newly synthesized proteins into and across the cytoplasmic membrane. The ability of the SecYEG translocon to transport an enormous variety of different substrates is in part determined by its ability to interact with multiple targeting factors, chaperones and accessory proteins. These interactions are crucial for the assisted passage of newly synthesized proteins from the cytosol into the different bacterial compartments. In this review, we summarize the current knowledge about SecYEG-mediated protein transport, primarily in the model organism Escherichia coli, and describe the dynamic interaction of the SecYEG translocon with its multiple partner proteins. We furthermore highlight how protein transport is regulated and explore recent developments in using the SecYEG translocon as an antimicrobial target.

SecA-Mediated Protein Translocation through the SecYEG Channel

In bacteria, the Sec translocase mediates the translocation of proteins into and across the cytoplasmic membrane. It consists of a protein conducting channel SecYEG, the ATP-dependent motor SecA, and the accessory SecDF complex. Here we discuss the function and structure of the Sec translocase.

The Sec System: Protein Export in Escherichia coli

In Escherichia coli, proteins found in the periplasm or the outer membrane are exported from the cytoplasm by the general secretory, Sec, system before they acquire stably folded structure. This dynamic process involves intricate interactions among cytoplasmic and membrane proteins, both peripheral and integral, as well as lipids. In vivo, both ATP hydrolysis and proton motive force are required. Here, we review the Sec system from the inception of the field through early 2016, including biochemical, genetic, and structural data.

A comparative approach to recombinantly produce the plant enzyme horseradish peroxidase in Escherichia coli

Horseradish peroxidase (HRP) is used in various biotechnological and medical applications. Since its isolation from plant provides several disadvantages, the bacterium Escherichia coli was tested as recombinant expression host in former studies. However, neither production from refolded inclusion bodies nor active enzyme expression in the periplasm exceeded final titres of 10 mg per litre cultivation broth. Thus, the traditional way of production of HRP from plant still prevails. In this study, we revisited the recombinant production of HRP in E. coli and investigated and compared both strategies, (a) the production of HRP as inclusion bodies (IBs) and subsequent refolding and (b) the production of active HRP in the periplasm. In fact, we were able to produce HRP in E. coli either way. We obtained a refolding yield of 10% from IBs giving a final titre of 100 mg L⁻¹ cultivation broth, and were able to produce 48 mg active HRP per litre cultivation broth in the periplasm. In terms of biochemical properties, soluble HRP showed a highly reduced catalytic activity and stability which probably results from the fusion partner DsbA used in this study. Refolded HRP showed similar substrate affinity, an 11-fold reduced catalytic efficiency and 2-fold reduced thermal stability compared to plant HRP. In conclusion, we developed a toolbox for HRP engineering and production. We propose to engineer HRP by directed evolution or semi-rational protein design, express HRP in the periplasm of E. coli allowing straight forward screening for improved variants, and finally produce these variants as IB in high amounts, which are then refolded.

Novel translocation intermediate allows re-evaluation of roles of ATP, proton motive force and SecG at the late stage of preprotein translocation

Presecretory proteins such as pOmpA are translocated across the inner membrane of Escherichia coli by Sec translocase powered by ATP and proton motive force (PMF). Translocation activity has been determined by protease protection assaying in vitro. We identified a new translocation intermediate at a late stage, which was protected by proteinase K (PK), but became PK sensitive upon urea extraction. At a late stage of pOmpA translocation driven by PMF in the presence of a nonhydrolyzable ATP analogue, the PK-protected materials arose, but were pulled back upon urea extraction, indicating that completion of translocation requires ATP hydrolysis. When inverted membrane vesicles prepared from secG-null strain (ΔSecG IMV) were used in the absence of PMF, the translocation intermediate was accumulated. When the ATP concentration was low in the absence of PMF, the translocation intermediate was also accumulated. Imposition of PMF in the presence of a low ATP concentration caused recovery of pOmpA translocation and resistance to urea extraction for SecG⁺ IMV, but not for ΔSecG IMV. Thus, analysis of the late translocation intermediate showed that two of three constituents, physiological concentration of ATP, PMF and SecG, are required for the catalytic cycle of preprotein translocation, that is, completion and subsequent initiation of translocation.

Channel crossing: how are proteins shipped across the bacterial plasma membrane?

The structure of the first protein-conducting channel was determined more than a decade ago. Today, we are still puzzled by the outstanding problem of protein translocation—the dynamic mechanism underlying the consignment of proteins across and into membranes. This review is an attempt to summarize and understand the energy transducing capabilities of protein-translocating machines, with emphasis on bacterial systems: how polypeptides make headway against the lipid bilayer and how the process is coupled to the free energy associated with ATP hydrolysis and the transmembrane protein motive force. In order to explore how cargo is driven across the membrane, the known structures of the protein-translocation machines are set out against the background of the historic literature, and in the light of experiments conducted in their wake. The paper will focus on the bacterial general secretory (Sec) pathway (SecY-complex), and its eukaryotic counterpart (Sec61-complex), which ferry proteins across the membrane in an unfolded state, as well as the unrelated Tat system that assembles bespoke channels for the export of folded proteins.

SecA: a potential antimicrobial target

There is a consensus in the medical profession of the pressing need for novel antimicrobial agents due to issues related to drug resistance. In practice, solutions to this problem to a large degree lie with the identification of new and vital targets in bacteria and subsequently designing their inhibitors. We consider SecA a very promising antimicrobial target. In this review, we compile and analyze information available on SecA to show that inhibition of SecA has a multitude of consequences. Furthermore, we discuss issues critical to the design and evaluation of SecA inhibitors.

Unlocking the Bacterial SecY Translocon

The Sec translocon performs protein secretion and membrane protein insertion at the plasma membrane of bacteria and archaea (SecYEG/β), and the endoplasmic reticular membrane of eukaryotes (Sec61). Despite numerous structures of the complex, the mechanism underlying translocation of pre-proteins, driven by the ATPase SecA in bacteria, remains unresolved. Here we present a series of biochemical and computational analyses exploring the consequences of signal sequence binding to SecYEG. The data demonstrate that a signal sequence-induced movement of transmembrane helix 7 unlocks the translocon and that this conformational change is communicated to the cytoplasmic faces of SecY and SecE, involved in SecA binding. Our findings progress the current understanding of the dynamic action of the translocon during the translocation initiation process. The results suggest that the converging effects of the signal sequence and SecA at the cytoplasmic face of SecYEG are decisive for the intercalation and translocation of pre-protein through the SecY channel.

•

Validation of previously observed signal sequence-induced “unlocking” of SecYEG

•

Conformational changes upon SecYEG unlocking are relayed to SecA binding site

•

Unlocking the translocon perturbs the interaction between SecY and SecE

•

Conformational changes distinct between secretion and membrane protein insertion

Evolutionary evidence on suitability of SecD as a target for development of antibacterial agents against Staphylococcus aureus

Staphylococcus aureus causes many infections and its drug resistance is a worrying challenge for medical care. The SecD subunit of Sec secretion system in methicillin‐resistant S. aureus is an attractive target because SecD dysfunction leads to the death of bacteria and SecD as a target is more efficient than SecA and SecF. Evolution could have made SecD to become insensitive to antibacterial agents although the drugs directly against SecD have yet to develop. So far, no detailed information on SecD evolution has been available, thus 2686 SecD sequences with full taxonomic information from kingdom to species were analyzed. First, the variance of pairwise p‐distance was evaluated for each taxonomic group. Second, the variance was further partitioned into intergroup and intragroup variances for quantification of horizontal and vertical gene transfer. Third, phylogenetic tree was built to trace the evolutionary pathway. The results showed that overall evolution of SecDs appears to have undergone horizontal and vertical gene transfer. Only 0.5% horizontal transfers were found between any two SecDs in S. aureus, 6.8% and 8.8% horizontal transfers were found between any two Staphylococcus SecDs from different and the same species, and only one SecD from S. aureus was located far away from its sister cluster. Thus, statistic and evolutionary analyses demonstrate that the SecDs from staphylococcus species have a small chance of mutating, and provide taxonomic evidence to use the SecD as a potential target for new generation of antibacterial agents against S. aureus.

SecA-mediated targeting and translocation of secretory proteins

More than 30 years of research have revealed that the dynamic nanomotor SecA is a central player in bacterial protein secretion. SecA associates with the SecYEG channel and transports polypeptides post-translationally to the trans side of the cytoplasmic membrane. It comprises a helicase-like ATPase core coupled to two domains that provide specificity for preprotein translocation. Apart from SecYEG, SecA associates with multiple ligands like ribosomes, nucleotides, lipids, chaperones and preproteins. It exerts its essential contribution in two phases. First, SecA, alone or in concert with chaperones, helps mediate the targeting of the secretory proteins from the ribosome to the membrane. Next, at the membrane it converts chemical energy to mechanical work and translocates preproteins through the SecYEG channel. SecA is a highly dynamic enzyme, it exploits disorder-order kinetics, swiveling and dissociation of domains and dimer to monomer transformations that are tightly coupled with its catalytic function. Preprotein signal sequences and mature domains exploit these dynamics to manipulate the nanomotor and thus achieve their export at the expense of metabolic energy. This article is part of a Special Issue entitled: Protein trafficking and secretion in bacteria. Guest Editors: Anastassios Economou and Ross Dalbey.

Breaking on through to the other side: protein export through the bacterial Sec system

More than one-third of cellular proteomes traffic into and across membranes. Bacteria have invented several sophisticated secretion systems that guide various proteins to extracytoplasmic locations and in some cases inject them directly into hosts. Of these, the Sec system is ubiquitous, essential and by far the best understood. Secretory polypeptides are sorted from cytoplasmic ones initially due to characteristic signal peptides. Then they are targeted to the plasma membrane by chaperones/pilots. The translocase, a dynamic nanomachine, lies at the centre of this process and acts as a protein-conducting channel with a unique property; allowing both forward transfer of secretory proteins but also lateral release into the lipid bilayer with high fidelity and efficiency. This process, tightly orchestrated at the expense of energy, ensures fundamental cell processes such as membrane biogenesis, cell division, motility, nutrient uptake and environmental sensing. In the present review, we examine this fascinating process, summarizing current knowledge on the structure, function and mechanics of the Sec pathway.

The bacterial Sec-translocase: structure and mechanism

Most bacterial secretory proteins pass across the cytoplasmic membrane via the translocase, which consists of a protein-conducting channel SecYEG and an ATP-dependent motor protein SecA. The ancillary SecDF membrane protein complex promotes the final stages of translocation. Recent years have seen a major advance in our understanding of the structural and biochemical basis of protein translocation, and this has led to a detailed model of the translocation mechanism.

Position-dependent effects of polylysine on Sec protein transport

The bacterial Sec protein translocation system catalyzes the transport of unfolded precursor proteins across the cytoplasmic membrane. Using a recently developed real time fluorescence-based transport assay, the effects of the number and distribution of positive charges on the transport time and transport efficiency of proOmpA were examined. As expected, an increase in the number of lysine residues generally increased transport time and decreased transport efficiency. However, the observed effects were highly dependent on the polylysine position in the mature domain. In addition, a string of consecutive positive charges generally had a more significant effect on transport time and efficiency than separating the charges into two or more charged segments. Thirty positive charges distributed throughout the mature domain resulted in effects similar to 10 consecutive charges near the N terminus of the mature domain. These data support a model in which the local effects of positive charge on the translocation kinetics dominate over total thermodynamic constraints. The rapid translocation kinetics of some highly charged proOmpA mutants suggest that the charge is partially shielded from the electric field gradient during transport, possibly by the co-migration of counter ions. The transport times of precursors with multiple positively charged sequences, or "pause sites," were fairly well predicted by a local effect model. However, the kinetic profile predicted by this local effect model was not observed. Instead, the transport kinetics observed for precursors with multiple polylysine segments support a model in which translocation through the SecYEG pore is not the rate-limiting step of transport.

The mechanism of protein export enhancement by the SecDF membrane component

Protein transport across membranes is a fundamental and essential cellular activity in all organisms. In bacteria, protein export across the cytoplasmic membrane, driven by dynamic interplays between the protein-conducting SecYEG channel (Sec translocon) and the SecA ATPase, is enhanced by the proton motive force (PMF) and a membrane-integrated Sec component, SecDF. However, the structure and function of SecDF have remained unclear. We solved the first crystal structure of SecDF, consisting of a pseudo-symmetrical 12-helix transmembrane domain and two protruding periplasmic domains. Based on the structural features, we proposed that SecDF functions as a membrane-integrated chaperone, which drives protein movement without using the major energetic currency, ATP, but with remarkable cycles of conformational changes, powered by the proton gradient across the membrane. By a series of biochemical and biophysical approaches, several functionally important residues in the transmembrane region have been identified and our model of the SecDF function has been verified.

An energy transduction mechanism used in bacterial flagellar type III protein export

Flagellar proteins of bacteria are exported by a specific export apparatus. FliI ATPase forms a complex with FliH and FliJ and escorts export substrates from the cytoplasm to the export gate complex, which is made up of six membrane proteins. The export gate complex utilizes proton motive force across the cytoplasmic membrane for protein translocation, but the mechanism remains unknown. Here we show that the export gate complex by itself is a proton-protein antiporter that uses the two components of proton motive force, Δψ and ΔpH, for different steps of the protein export process. However, in the presence of FliH, FliI and FliJ, a specific binding of FliJ with an export gate membrane protein, FlhA, is brought about by the FliH-FliI complex, which turns the export gate into a highly efficient, Δψ-driven protein export apparatus.

Probing the SecYEG translocation pore size with preproteins conjugated with sizable rigid spherical molecules

Protein translocation in Escherichia coli is mediated by the translocase that in its minimal form consists of the protein-conducting channel SecYEG, and the motor protein, SecA. SecYEG forms a narrow pore in the membrane that allows passage of unfolded proteins only. Molecular dynamics simulations suggest that the maximal width of the central pore of SecYEG is limited to . To access the functional size of the SecYEG pore, the precursor of outer membrane protein A was modified with rigid spherical tetraarylmethane derivatives of different diameters at a unique cysteine residue. SecYEG allowed the unrestricted passage of the precursor of outer membrane protein A conjugates carrying tetraarylmethanes with diameters up to , whereas a sized molecule blocked the translocation pore. Translocation of the protein-organic molecule hybrids was strictly proton motive force-dependent and occurred at a single pore. With an average diameter of an unfolded polypeptide chain of , the pore accommodates structures of at least , which is vastly larger than the predicted maximal width of a single pore by molecular dynamics simulations.

SecA, a remarkable nanomachine

Biological cells harbor a variety of molecular machines that carry out mechanical work at the nanoscale. One of these nanomachines is the bacterial motor protein SecA which translocates secretory proteins through the protein-conducting membrane channel SecYEG. SecA converts chemically stored energy in the form of ATP into a mechanical force to drive polypeptide transport through SecYEG and across the cytoplasmic membrane. In order to accommodate a translocating polypeptide chain and to release transmembrane segments of membrane proteins into the lipid bilayer, SecYEG needs to open its central channel and the lateral gate. Recent crystal structures provide a detailed insight into the rearrangements required for channel opening. Here, we review our current understanding of the mode of operation of the SecA motor protein in concert with the dynamic SecYEG channel. We conclude with a new model for SecA-mediated protein translocation that unifies previous conflicting data.

The Sec translocase

The vast majority of proteins trafficking across or into the bacterial cytoplasmic membrane occur via the translocon. The translocon consists of the SecYEG complex that forms an evolutionarily conserved heterotrimeric protein-conducting membrane channel that functions in conjunction with a variety of ancillary proteins. For posttranslational protein translocation, the translocon interacts with the cytosolic motor protein SecA that drives the ATP-dependent stepwise translocation of unfolded polypeptides across the membrane. For the cotranslational integration of membrane proteins, the translocon interacts with ribosome-nascent chain complexes and membrane insertion is coupled to polypeptide chain elongation at the ribosome. These processes are assisted by the YidC and SecDF(yajC) complex that transiently interacts with the translocon. This review summarizes our current understanding of the structure-function relationship of the translocon and its interactions with ancillary components during protein translocation and membrane protein insertion. This article is part of a Special Issue entitled Protein translocation across or insertion into membranes.

Charged amino acids in a preprotein inhibit SecA-dependent protein translocation

Sec translocase catalyzes membrane protein insertion and translocation. We have introduced stretches of charged amino acid residues into the preprotein proOmpA and have analyzed their effect on in vitro protein translocation into Escherichia coli inner membrane vesicles. Both negatively and positively charged amino acid residues inhibit translocation of proOmpA, yielding a partially translocated polypeptide chain that blocks the translocation site and no longer activates preprotein-stimulated SecA ATPase activity. Stretches of positively charged residues are much stronger translocation inhibitors and suppressors of the preprotein-stimulated SecA ATPase activity than negatively charged residues. These results indicate that both clusters of positively and negatively charged amino acids are poor substrates for the Sec translocase and that this is reflected by their inability to stimulate the ATPase activity of SecA.

Sec- and Tat-mediated protein secretion across the bacterial cytoplasmic membrane--distinct translocases and mechanisms

In bacteria, two major pathways exist to secrete proteins across the cytoplasmic membrane. The general Secretion route, termed Sec-pathway, catalyzes the transmembrane translocation of proteins in their unfolded conformation, whereupon they fold into their native structure at the trans-side of the membrane. The Twin-arginine translocation pathway, termed Tat-pathway, catalyses the translocation of secretory proteins in their folded state. Although the targeting signals that direct secretory proteins to these pathways show a high degree of similarity, the translocation mechanisms and translocases involved are vastly different.

Interactions that drive Sec-dependent bacterial protein transport

Understanding the transport of hydrophilic proteins across biological membranes continues to be an important undertaking. The general secretory (Sec) pathway in Escherichia coli transports the majority of E. coli proteins from their point of synthesis in the cytoplasm to their sites of final localization, associating sequentially with a number of protein components of the transport machinery. The targeting signals for these substrates must be discriminated from those of proteins transported via other pathways. While targeting signals for each route have common overall characteristics, individual signal peptides vary greatly in their amino acid sequences. How do these diverse signals interact specifically with the proteins that comprise the appropriate transport machinery and, at the same time, avoid targeting to an alternate route? The recent publication of the crystal structures of components of the Sec transport machinery now allows a more thorough consideration of the interactions of signal sequences with these components.

Bacterial sec-translocase unfolds and translocates a class of folded protein domains

It is generally assumed that preprotein substrates must be presented in an unfolded state to the bacterial Sec-translocase in order to be translocated. Here, we have examined the ability of the Sec-translocase to translocate folded preproteins. Tightly folded human cardiac Ig-like domain I27 fused to the C terminus of proOmpA is translocated efficiently by the Sec-translocase and the translocation kinetics are determined by the extent of folding of the titin I27 domain. Accumulation of specific translocation intermediates around the fusion point that undergo translocation progress upon ATP binding suggests that the motor protein SecA plays an important and decisive role in promoting unfolding of the titin I27 domain. It is concluded that the bacterial Sec-translocase is capable of actively unfolding preproteins.

The bacterial twin-arginine translocation pathway

The twin-arginine translocation (Tat) pathway is responsible for the export of folded proteins across the cytoplasmic membrane of bacteria. Substrates for the Tat pathway include redox enzymes requiring cofactor insertion in the cytoplasm, multimeric proteins that have to assemble into a complex prior to export, certain membrane proteins, and proteins whose folding is incompatible with Sec export. These proteins are involved in a diverse range of cellular activities including anaerobic metabolism, cell envelope biogenesis, metal acquisition and detoxification, and virulence. The Escherichia coli translocase consists of the TatA, TatB, and TatC proteins, but little is known about the precise sequence of events that leads to protein translocation, the energetic requirements, or the mechanism that prevents the export of misfolded proteins. Owing to the unique characteristics of the pathway, it holds promise for biotechnological applications.

Deregulation of the SecYEG translocation channel upon removal of the plug domain

Previous studies have shown that the SecY plug is displaced from the center of the SecYEG channel during polypeptide translocation. The structural and functional consequences of the deletion of the plug are now examined. Both in vivo and in vitro observations indicate that the plug domain is not essential to the function of the translocon. In fact, deletion of the plug confers to the cell and to the membranes a Prl-like phenotype: reduced proton-motive force dependence of translocation, increased membrane insertion of SecA, diminished requirement for functional leader peptide, and weakened SecYEG subunit association. Although the plug domain does not seem essential, locking the plug in the center of the channel inactivates the translocon. Thus, the SecY plug is important to regulate the activity of the channel and to confer specificity to the translocation reaction. We propose that the plug contributes to the gating mechanism of the channel by maintaining the structure of the SecYEG complex in a compact closed state.

Investigating the SecY plug movement at the SecYEG translocation channel

Protein translocation occurs across the energy-conserving bacterial membrane at the SecYEG channel. The crystal structure of the channel has revealed a possible mechanism for gating and opening. This study evaluates the plug hypothesis using cysteine crosslink experiments in combination with various allelic forms of the Sec complex. The results demonstrate that the SecY plug domain moves away from the center of the channel toward SecE during polypeptide translocation, and further show that the translocation-enhancing prlA3 mutation and SecG subunit change the properties of channel gating. Locking the plug in the open state preactivates the Sec complex, and a super-active translocase can be created when combined with the prlA4 mutation located in the pore of the channel. Dimerization of the Sec complex, which is essential for translocase activity, relocates the plug toward the open position. We propose that oligomerization may result in SecYEG cooperative interactions important to prime the translocon function.

Recombinant protein folding and misfolding in Escherichia coli

The past 20 years have seen enormous progress in the understanding of the mechanisms used by the enteric bacterium Escherichia coli to promote protein folding, support protein translocation and handle protein misfolding. Insights from these studies have been exploited to tackle the problems of inclusion body formation, proteolytic degradation and disulfide bond generation that have long impeded the production of complex heterologous proteins in a properly folded and biologically active form. The application of this information to industrial processes, together with emerging strategies for creating designer folding modulators and performing glycosylation all but guarantee that E. coli will remain an important host for the production of both commodity and high value added proteins.

Structure and function of SecA, the preprotein translocase nanomotor

Most secretory proteins that are destined for the periplasm or the outer membrane are exported through the bacterial plasma membrane by the Sec translocase. Translocase is a complex nanomachine that moves processively along its aminoacyl polymeric substrates effectively pumping them to the periplasmic space. The salient features of this process are: (a) a membrane-embedded "clamp" formed by the trimeric SecYEG protein, (b) a "motor" provided by the dimeric SecA ATPase, (c) regulatory subunits that optimize catalysis and (d) both chemical and electrochemical metabolic energy. Significant recent strides have allowed structural, biochemical and biophysical dissection of the export reaction. A model incorporating stepwise strokes of the translocase nanomachine at work is discussed.

The protein-conducting channel SecYEG

In bacteria, the translocase mediates the translocation of proteins into or across the cytosolic membrane. It consists of a membrane embedded protein-conducting channel and a peripherally associated motor domain, the ATPase SecA. The channel is formed by SecYEG, a multimeric protein complex that assembles into oligomeric forms. The structure and subunit composition of this protein-conducting channel is evolutionary conserved and a similar system is found in the endoplasmic reticulum of eukaryotes and the cytoplasmic membrane of archaea. The ribosome and other membrane proteins can associate with the protein-conducting channel complex and affect its activity or functionality.

SecYEG Proteoliposomes Catalyze the Δϕ-Dependent Membrane Insertion of FtsQ

In Escherichia coli, the insertion of most inner membrane proteins is mediated by the Sec translocase. Ribosome-bound nascent chains of Sec-dependent inner membrane proteins are targeted to the SecYEG complex via the signal recognition particle pathway. We now demonstrate that the signal recognition particle-dependent co-translational membrane targeting and membrane insertion of FtsQ can be reconstituted with proteoliposomes containing purified SecYEG. SecA and a transmembrane electrical potential are essential for the translocation of the large periplasmic domain of FtsQ, whereas co-reconstituted YidC has an inhibitory effect. These data demonstrate that membrane protein insertion can be reconstituted with a minimal set of purified Sec components.

Ring-like pore structures of SecA: implication for bacterial protein-conducting channels

SecA, an essential component of the general protein secretion pathway of bacteria, is present in Escherichia coli as soluble and membrane-integral forms. Here we show by electron microscopy that SecA assumes two characteristic forms in the presence of phospholipid monolayers: dumbbell-shaped elongated structures and ring-like pore structures. The ring-like pore structures with diameters of 8 nm and holes of 2 nm are found only in the presence of anionic phospholipids. These ring-like pore structures with larger 3- to 6-nm holes (without staining) were also observed by atomic force microscopic examination. They do not form in solution or in the presence of uncharged phosphatidylcholine. These ring-like phospholipid-induced pore-structures may form the core of bacterial protein-conducting channels through bacterial membranes.

Interfering mutations provide in vivo evidence that Escherichia coli SecE functions in multimeric states

SecY, SecE and SecG form a heterotrimer, which functions as a protein translocation channel in Escherichia coli. The cytosolic loop of SecE contains a segment that is conserved among different organisms. Here we show that mutational alterations in this segment not only inactivate the SecE function but confer dominant interfering properties on the altered SecE molecule. Such effects were especially evident in mutant cells in which the requirement for SecE function was increased. Overproduction of SecE, but not of SecY, alleviated the dominant negative effects. These results suggest that the inactive SecE molecule sequesters wild-type SecE. It was also found that an amino acid substitution, D112P, in the C-terminal periplasmic region intragenically suppressed the dominant interference. These results are consistent with a notion that there is significant SecE-SecE interaction in vivo, in which the C-terminal region has an important role. The data hence suggest that dimeric SecE participates in the formation of the functional translocation channel.

Protein translocons: multifunctional mediators of protein translocation across membranes

Protein translocation systems consist of complex molecular machines whose activities are not limited to unidirectional protein targeting. Protein translocons and their associated receptor systems can be viewed as dynamic modular units whose interactions, and therefore functions, are regulated in response to specific signals. This flexibility allows translocons to interact with multiple signal receptor systems to manage the targeting of topologically distinct classes of proteins, to mediate targeting to different suborganellar compartments, and to respond to stress and developmental cues. Furthermore, the activities of translocons are tightly coordinated with downstream events, thereby providing a direct link between targeting and protein maturation.

A SecE mutation that modulates SecY-SecE translocase assembly, identified as a specific suppressor of SecY defects

The SecY39(Cs) (cold-sensitive) alteration of Arg357 results in a defect of translocation initiation. As a means to dissect the Sec translocation machinery, we isolated mutations that act as suppressors of the secY39 defect. A specific secE mutation, designated secE105, was thus isolated. This mutation proved to be identical with the prlG2 mutation and to suppress a number of cold-sensitive secY mutations. However, other prlG mutations did not effectively suppress the secY defects. Evidence indicates that the Ser105-to-Pro alteration in the C-terminal transmembrane segment of SecE weakens SecY-SecE association. In vitro analyses showed that the SecE(S105P) alteration preferentially stimulates the initial phase of translocation. It is suggested that the S105P alteration affects the SecYEG channel such that it is more prone to open and to accept the translocation initiation domain of a preprotein molecule.

Biochemical characterization of a mutationally altered protein translocase: proton motive force stimulation of the initiation phase of translocation

Protein translocation across the Escherichia coli plasma membrane is facilitated by concerted actions of the SecYEG integral membrane complex and the SecA ATPase. A secY mutation (secY39) affects Arg357, an evolutionarily conserved and functionally important residue, and impairs the translocation function in vivo and in vitro. In this study, we used the "superactive" mutant forms of SecA, which suppress the SecY39 deficiency, to characterize the mutationally altered SecY39EG translocase. It was found that SecY39-mediated preprotein translocation exhibited absolute dependence on the proton motive force. The proton motive force-dependent step proved to lie before signal peptide cleavage. We suggest that the proton motive force assists in the initiation phase of protein translocation.

Kinetic analysis of the translocation of fluorescent precursor proteins into Escherichia coli membrane vesicles

Protein secretion in Escherichia coli is mediated by translocase, a multi-subunit membrane protein complex with SecA as ATP-driven motor protein and the SecYEG complex as translocation pore. A fluorescent assay was developed to facilitate kinetic studies of protein translocation. Single cysteine mutants of proOmpA were site-specific labeled with fluorescent dyes, and the SecA and ATP-dependent translocation into inner membrane vesicles and SecYEG proteoliposomes was monitored by means of protease accessibility and in gel fluorescent imaging. The translocation of fluorescently labeled proOmpA was largely independent on the position and the size of the fluorescent label (up to a size of 13-16 A). A fluorophore at the +4 position blocked translocation, but inhibition was completely relieved in the PrlA4 mutant. The kinetics of translocation of the fluorescently labeled proOmpA could be directly monitored by means of fluorescence quenching. Inner membrane vesicles containing wild-type SecYEG were found to translocate proOmpA with a turnover of 4.5 molecules proOmpA/SecYEG complex/min and an apparent K(m) of 180 nm, whereas the PrlA4 mutant showed an almost 10-fold increase in turnover rate and a 3-fold increase of the apparent K(m) for proOmpA translocation.

Defective translocation of a signal sequence mutant in a prlA4 suppressor strain of Escherichia coli

In the accompanying paper [Adams, H., Scotti, P.A., de Cock, H., Luirink, J. & Tommassen, J. (2002) Eur. J. Biochem.269, 5564-5571], we showed that the precursor of outer-membrane protein PhoE of Escherichia coli with a Gly to Leu substitution at position -10 in the signal sequence (G-10L) is targeted to the SecYEG translocon via the signal-recognition particle (SRP) route, instead of via the SecB pathway. Here, we studied the fate of the mutant precursor in a prlA4 mutant strain. prlA mutations, located in the secY gene, have been isolated as suppressors that restore the export of precursors with defective signal sequences. Remarkably, the G-10L mutant precursor, which is normally exported in a wild-type strain, accumulated strongly in a prlA4 mutant strain. In vitro cross-linking experiments revealed that the precursor is correctly targeted to the prlA4 mutant translocon. However, translocation across the cytoplasmic membrane was defective, as appeared from proteinase K-accessibility experiments in pulse-labeled cells. Furthermore, the mutant precursor was found to accumulate when expressed in a secY40 mutant, which is defective in the insertion of integral-membrane proteins but not in protein translocation. Together, these data suggest that SecB and SRP substrates are differently processed at the SecYEG translocon.

A novel class of secA alleles that exert a signal-sequence-dependent effect on protein export in Escherichia coli

The murine plasminogen activator inhibitor 2 (PAI2) signal sequence inefficiently promotes the export of E. coli alkaline phosphatase (AP). High-level expression of PAI2::AP chimeric proteins from the arabinose P(BAD) promoter is toxic and confers an Ara(S) phenotype. Most Ara(R) suppressors map to secA, as determined by sequencing 21 independent alleles. Mutations occur throughout the gene, including both nucleotide binding domains (NBDI and NBDII) and the putative signal sequence binding domain (SSBD). Using malE and phoA signal sequence mutants, we showed that the vast majority of these secA suppressors exhibit weak Sec phenotypes. Eight of these secA mutations were further characterized in detail. Phenotypically, these eight suppressors can be divided into three groups, each localized to one domain of SecA. Most mutations allow near-normal levels of wild-type preprotein export, but they enhance the secretion defect conferred by signal sequence mutations. Interestingly, one group exerts a selective effect on the export of PAI2::AP when compared to that of AP. In conclusion, this novel class of secA mutations, selected as suppressors of a toxic signal sequence, differs from the classical secA (prlD) mutations, selected as suppressors of defective signal sequences, although both types of mutations affect signal sequence recognition.

Pal lipoprotein of Escherichia coli plays a major role in outer membrane integrity

The Tol-Pal system of gram-negative bacteria is composed of five proteins. TolA, TolQ, and TolR are inner membrane proteins, TolB is a periplasmic protein, and Pal, the peptidoglycan-associated lipoprotein, is anchored to the outer membrane. In this study, the roles of Pal and major lipoprotein Lpp were compared in Escherichia coli. lpp and tol-pal mutations have previously been found to perturb the outer membrane permeability barrier and to cause the release of periplasmic proteins and the formation of outer membrane vesicles. In this study, we showed that the overproduction of Pal is able to restore the outer membrane integrity of an lpp strain but that overproduced Lpp has no effect in a pal strain. Together with the previously reported observation that overproduced TolA complements an lpp but not a pal strain, these results indicate that the cell envelope integrity is efficiently stabilized by an epistatic Tol-Pal system linking inner and outer membranes. The density of Pal was measured and found to be lower than that of Lpp. However, Pal was present in larger amounts compared to TolA and TolR proteins. The oligomeric state of Pal was determined and a new interaction between Pal and Lpp was demonstrated.

Components required for membrane assembly of newly synthesized K+ channel KcsA

An Escherichia coli in vitro transcription-translation system was used to study the components involved in the biogenesis of the homotetrameric potassium channel KcsA. We show that a functional signal recognition particle pathway is essential for tetramer formation, probably to direct correct monomer insertion in the membrane. In the absence of YidC or at reduced SecYEG levels, KcsA assembly occurs with lower efficiency. Strikingly, the highest efficiency of tetramerization was observed when transcription-translation was carried out in the presence of pure lipid vesicles, demonstrating that a phospholipid bilayer is the minimal membrane requirement to form the KcsA tetramer. It is concluded that SecYEG and YidC are not required for the formation of tetrameric KcsA in vitro.

The F286Y mutation of PrlA4 tempers the signal sequence suppressor phenotype by reducing the SecA binding affinity

SecYEG forms the protein-conducting channel of the Escherichia coli translocase. It binds the peripheral ATPase SecA that drives the preprotein translocation reaction. PrlA4 is a double mutant of SecY that enables the translocation of preproteins with a defective or even missing signal sequence. The effect of the individual mutations, F286Y and I408N, was studied with SecYEG proteoliposomes. SecY(I408N) is responsible for the increased translocation of preproteins with a defective and normal signal sequence, and exhibits a stronger prl phenotype than PrlA4. This activity correlates with an elevated SecA-translocation ATPase and SecA binding affinity. SecY(F286Y) supports only a low SecA binding affinity, preprotein translocation and SecA translocation ATPase activity. These results suggest that the second site F286Y mutation reduces the strength of the I408N mutation of PrlA4 by lowering the SecA binding affinity.

Efficient membrane assembly of the KcsA potassium channel in Escherichia coli requires the protonmotive force

Very little is known about the biogenesis and assembly of oligomeric membrane proteins. In this study, the biogenesis of KcsA, a prokaryotic homotetrameric potassium channel, is investigated. Using in vivo pulse-chase experiments, both the monomeric and tetrameric form could be identified. The conversion of monomers into a tetramer is found to be a highly efficient process that occurs in the Escherichia coli inner membrane. KcsA does not require ATP hydrolysis by SecA for insertion or tetramerization. The presence of the proton-motive force (pmf) is not necessary for transmembrane insertion of KcsA; however, the pmf proved to be essential for the efficiency of oligomerization. From in vivo and in vitro experiments it is concluded that the electrical component, deltapsi, is the main determinant for this effect. These results demonstrate a new role of the pmf in membrane protein biogenesis.

Escherichia coli translocase: the unravelling of a molecular machine

Protein translocation across the bacterial cytoplasmic membrane has been studied extensively in Escherichia coli. The identification of the components involved and subsequent reconstitution of the purified translocation reaction have defined the minimal constituents that allowed extensive biochemical characterization of the so-called translocase. This functional enzyme complex consists of the SecYEG integral membrane protein complex and a peripherally bound ATPase, SecA. Under translocation conditions, four SecYEG heterotrimers assemble into one large protein complex, forming a putative protein-conducting channel. This tetrameric arrangement of SecYEG complexes and the highly dynamic SecA dimer together form a proton-motive force- and ATP-driven molecular machine that drives the stepwise translocation of targeted polypeptides across the cytoplasmic membrane. Recent findings concerning the translocase structure and mechanism of protein translocation are discussed and shine new light on controversies in the field.

Bacterial protein translocase: a unique molecular machine with an army of substrates

Secretion of most polypeptides across the bacterial plasma membrane is catalyzed by the Sec protein translocase. This complex molecular machine comprises a flexible transmembrane conduit coupled to a motor-like component and displays four activities: (a) it is a specific receptor at its cytoplasmic side for all secretory polypeptides, (b) it converts metabolic energy from ATP and proton gradients into mechanical motion, (c) it prevents substrates from folding in statu translocanti and (d) it binds and releases short segments of the polymeric substrate sequentially. Combination of these activities allows translocase to move processively along the length of the substrate. Substrates are thus gradually expelled from the membrane and are released for subsequent extracytoplasmic folding.

A mutation in secY that causes enhanced SecA insertion and impaired late functions in protein translocation

A cold-sensitive secY mutant (secY125) with an amino acid substitution in the first periplasmic domain causes in vivo retardation of protein export. Inverted membrane vesicles prepared from this mutant were as active as the wild-type membrane vesicles in translocation of a minute amount of radioactive preprotein. The mutant membrane also allowed enhanced insertion of SecA, and this SecA insertion was dependent on the SecD and SecF functions. These and other observations suggested that the early events in translocation, such as SecA-dependent insertion of the signal sequence region, is actually enhanced by the SecY125 alteration. In contrast, since the mutant membrane vesicles had decreased capacity to translocate chemical quantity of pro-OmpA and since they were readily inactivated by pretreatment of the vesicles under the conditions in which a pro-OmpA translocation intermediate once accumulated, the late translocation functions appear to be impaired. We conclude that this periplasmic secY mutation causes unbalanced early and late functions in translocation, compromising the translocase's ability to catalyze multiple rounds of reactions.