In vitro selection for altered divalent metal specificity in the RNase P RNA

A minimal RNA substrate with dual fluorescent probes enables rapid kinetics and provides insight into bacterial RNase P active site interactions

Bacterial ribonuclease P (RNase P) is a tRNA processing endonuclease that occurs primarily as a ribonucleoprotein with a catalytic RNA subunit (P RNA). As one of the first ribozymes discovered, P RNA is a well-studied model system for understanding RNA catalysis and substrate recognition. Extensive structural and biochemical studies have revealed the structure of RNase P bound to precursor tRNA (ptRNA) and product tRNA. These studies also helped to define active site residues and propose the molecular interactions that are involved in substrate binding and catalysis. However, a detailed quantitative model of the reaction cycle that includes the structures of intermediates and the process of positioning active site metal ions for catalysis is lacking. To further this goal, we used a chemically modified minimal RNA duplex substrate (MD1) to establish a kinetic framework for measuring the functional effects of P RNA active site mutations. Substitution of U69, a critical nucleotide involved in active site Mg2+ binding, was found to reduce catalysis >500-fold as expected, but had no measurable effect on ptRNA binding kinetics. In contrast, the same U69 mutations had little effect on catalysis in Ca2+ compared to reactions containing native Mg2+ ions. CryoEM structures and SHAPE mapping suggested increased flexibility of U69 and adjacent nucleotides in Ca2+ compared to Mg2+. These results support a model in which slow catalysis in Ca2+ is due to inability to engage U69. These studies establish a set of experimental tools to analyze RNase P kinetics and mechanism and can be expanded to gain new insights into the assembly of the active RNase P-ptRNA complex.

Extended magnesium and calcium force field parameters for accurate ion-nucleic acid interactions in biomolecular simulations

Magnesium and calcium play an essential role in the folding and function of nucleic acids. To correctly describe their interactions with DNA and RNA in biomolecular simulations, an accurate parameterization is crucial. In most cases, the ion parameters are optimized based on a set of experimental solution properties such as solvation free energies, radial distribution functions, water exchange rates, and activity coefficient derivatives. However, the transferability of such bulk-optimized ion parameters to quantitatively describe biomolecular systems is limited. Here, we extend the applicability of our previous bulk-optimized parameters by including experimental binding affinities toward the phosphate oxygen on nucleic acids. In particular, we systematically adjust the combination rules that are an integral part of the pairwise interaction potentials of classical force fields. This allows us to quantitatively describe specific ion binding to nucleic acids without changing the solution properties in the most simple and efficient way. We show the advancement of the optimized Lorentz combination rule for two representative nucleic acid systems. For double-stranded DNA, the optimized combination rule for Ca²⁺ significantly improves the agreement with experiments, while the standard combination rule leads to unrealistically distorted DNA structures. For the add A-riboswitch, the optimized combination rule for Mg²⁺ improves the structure of two specifically bound Mg²⁺ ions as judged by the experimental distance to the binding site. Including experimental binding affinities toward specific ion binding sites on biomolecules, therefore, provides a promising perspective to develop a more accurate description of metal cations for biomolecular simulations.

Inner-Sphere Coordination of Divalent Metal Ion with Nucleobase in Catalytic RNA

Identification of the function of metal ions and the RNA moieties, particularly nucleobases, that bind metal ions is important in RNA catalysis. Here we combine single-atom and abasic substitutions to probe functions of conserved nucleobases in ribonuclease P (RNase P). Structural and biophysical studies of bacterial RNase P propose direct coordination of metal ions by the nucleobases of conserved uridine and guanosine in helix P4 of the RNA subunit (P RNA). To biochemically probe the function of metal ion interactions, we substituted the universally conserved bulged uridine (U51) in the P4 helix of circularly permuted Bacillus subtilis P RNA with 4-thiouridine, 4-deoxyuridine, and abasic modifications and G378/379 with 2-aminopurine, N7-deazaguanosine, and 6-thioguanosine. The functional group modifications of U51 decrease RNase P-catalyzed phosphodiester bond cleavage 16- to 23-fold, as measured by the single-turnover cleavage rate constant. The activity of the 4-thiouridine RNase P is partially rescued by addition of Cd(II) or Mn(II) ions. This is the first time a metal-rescue experiment provides evidence for inner-sphere divalent metal ion coordination with a nucleobase. Modifications of G379 modestly decrease the cleavage activity of RNase P, suggesting outer-sphere coordination of O6 on G379 to a metal ion. These data provide biochemical evidence for catalytically important interactions of the P4 helix of P RNA with metal ions, demonstrating that the bulged uridine coordinates at least one catalytic metal ion through an inner-sphere interaction. The combination of single-atom and abasic nucleotide substitutions provides a powerful strategy to probe functions of conserved nucleobases in large RNAs.

A divalent cation-dependent variant of the glmS ribozyme with stringent Ca2+ selectivity co-opts a preexisting nonspecific metal ion-binding site

Ribozymes use divalent cations for structural stabilization, as catalytic cofactors, or both. Because of the prominent role of Ca²⁺ in intracellular signaling, engineered ribozymes with stringent Ca²⁺ selectivity would be important in biotechnology. The wild-type glmS ribozyme (glmS^WT) requires glucosamine-6-phosphate (GlcN6P) as a catalytic cofactor. Previously, a glmS ribozyme variant with three adenosine mutations (glmS^AAA) was identified, which dispenses with GlcN6P and instead uses, with little selectivity, divalent cations as cofactors for site-specific RNA cleavage. We now report a Ca²⁺-specific ribozyme (glmS^Ca) evolved from glmS^AAA that is >10,000 times more active in Ca²⁺ than Mg²⁺, is inactive in even 100 mM Mg²⁺, and is not responsive to GlcN6P. This stringent selectivity, reminiscent of the protein nuclease from Staphylococcus, allows rapid and selective ribozyme inactivation using a Ca²⁺ chelator such as EGTA. Because glmS^Ca functions in physiologically relevant Ca²⁺ concentrations, it can form the basis for intracellular sensors that couple Ca²⁺ levels to RNA cleavage. Biochemical analysis of glmS^Ca reveals that it has co-opted for selective Ca²⁺ binding a nonspecific cation-binding site responsible for structural stabilization in glmS^WT and glmS^AAA Fine-tuning of the selectivity of the cation site allows repurposing of this preexisting molecular feature.

Mechanistic Studies Reveal Similar Catalytic Strategies for Phosphodiester Bond Hydrolysis by Protein-only and RNA-dependent Ribonuclease P

Ribonuclease P (RNase P) is an endonuclease that catalyzes the essential removal of the 5' end of tRNA precursors. Until recently, all identified RNase P enzymes were a ribonucleoprotein with a conserved catalytic RNA component. However, the discovery of protein-only RNase P (PRORP) shifted this paradigm, affording a unique opportunity to compare mechanistic strategies used by naturally evolved protein and RNA-based enzymes that catalyze the same reaction. Here we investigate the enzymatic mechanism of pre-tRNA hydrolysis catalyzed by the NYN (Nedd4-BP1, YacP nuclease) metallonuclease of Arabidopsis thaliana, PRORP1. Multiple and single turnover kinetic data support a mechanism where a step at or before chemistry is rate-limiting and provide a kinetic framework to interpret the results of metal alteration, mutations, and pH dependence. Catalytic activity has a cooperative dependence on the magnesium concentration (nH = 2) under kcat/Km conditions, suggesting that PRORP1 catalysis is optimal with at least two active site metal ions, consistent with the crystal structure. Metal rescue of Asp-to-Ala mutations identified two aspartates important for enhancing metal ion affinity. The single turnover pH dependence of pre-tRNA cleavage revealed a single ionization (pKa ∼ 8.7) important for catalysis, consistent with deprotonation of a metal-bound water nucleophile. The pH and metal dependence mirrors that observed for the RNA-based RNase P, suggesting similar catalytic mechanisms. Thus, despite different macromolecular composition, the RNA and protein-based RNase P act as dynamic scaffolds for the binding and positioning of magnesium ions to catalyze phosphodiester bond hydrolysis.

Building the repertoire of dispensable chromosome regions in Bacillus subtilis entails major refinement of cognate large-scale metabolic model

The nonessential regions in bacterial chromosomes are ill-defined due to incomplete functional information. Here, we establish a comprehensive repertoire of the genome regions that are dispensable for growth of Bacillus subtilis in a variety of media conditions. In complex medium, we attempted deletion of 157 individual regions ranging in size from 2 to 159 kb. A total of 146 deletions were successful in complex medium, whereas the remaining regions were subdivided to identify new essential genes (4) and coessential gene sets (7). Overall, our repertoire covers ∼76% of the genome. We screened for viability of mutant strains in rich defined medium and glucose minimal media. Experimental observations were compared with predictions by the iBsu1103 model, revealing discrepancies that led to numerous model changes, including the large-scale application of model reconciliation techniques. We ultimately produced the iBsu1103V2 model and generated predictions of metabolites that could restore the growth of unviable strains. These predictions were experimentally tested and demonstrated to be correct for 27 strains, validating the refinements made to the model. The iBsu1103V2 model has improved considerably at predicting loss of viability, and many insights gained from the model revisions have been integrated into the Model SEED to improve reconstruction of other microbial models.

Cocaine detection by structure-switch aptamer-based capillary zone electrophoresis

Aptamers, which are nucleic acid oligonucleotides that can bind targets with high affinity and specificity, have been widely applied as affinity probes in capillary electrophoresis (CE). Due to relative weak interaction between aptamers and small molecules, the application of aptamer-based CE is still limited in certain compounds. A new strategy that is based on the aptamer structure-switch concept was designed for small molecule detection by a novel CE method. A carboxyfluorescein (fluorescein amidite, FAM) label DNA aptamer was first incubated with partial complementary strand (CS), and then the free aptamer and the aptamer-CS duplex were well separated and determined by metal cation mediated CE/laser-induced fluorescence. When the target was introduced into the incubated sample, the hybridized form was destabilized, resulting in the changes of the fluorescence intensities of the free aptamer and the aptamer-CS duplex. The length of CS was investigated and 12 mer CS showed the best sensitivity for the detection of cocaine. The presented CE-LIF method, which combines the separation power of CE with the specificity of interactions occurring between target, aptamer, and CS, could be a universal detection strategy for other aptamer-specified small molecules.

Characterization of metal ion-nucleic acid interactions in solution

Metal ions are inextricably involved with nucleic acids due to their polyanionic nature. In order to understand the structure and function of RNAs and DNAs, one needs to have detailed pictures on the structural, thermodynamic, and kinetic properties of metal ion interactions with these biomacromolecules. In this review we first compile the physicochemical properties of metal ions found and used in combination with nucleic acids in solution. The main part then describes the various methods developed over the past decades to investigate metal ion binding by nucleic acids in solution. This includes for example hydrolytic and radical cleavage experiments, mutational approaches, as well as kinetic isotope effects. In addition, spectroscopic techniques like EPR, lanthanide(III) luminescence, IR and Raman as well as various NMR methods are summarized. Aside from gaining knowledge about the thermodynamic properties on the metal ion-nucleic acid interactions, especially NMR can be used to extract information on the kinetics of ligand exchange rates of the metal ions applied. The final section deals with the influence of anions, buffers, and the solvent permittivity on the binding equilibria between metal ions and nucleic acids. Little is known on some of these aspects, but it is clear that these three factors have a large influence on the interaction between metal ions and nucleic acids.

Chemiluminescently labeled aptamers as the affinity probe for interaction analysis by capillary electrophoresis

Aptamers are nucleic acid oligonucleotides, which can recognize targets with high affinity and specificity. Fluorescently labeled aptamers have been used as affinity probes in CE for interaction analysis. In this study, a method of labeling aptamers chemiluminescently with isoluminol isothiocyanate (ILITC) through covalent bonds was proposed and realized. The ILITC-labeled aptamers were characterized by HPLC-MS and purified by HPLC. After desalination, the ILITC-labeled aptamers were employed as the affinity probe for interaction analysis in CE coupled with chemiluminescence detection (CE-CL) by interface of end column reaction mode, the apparatus of which was home-designed and setup. CE-CL experiment conditions, including buffer pH, concentrations of horseradish peroxidase and H(2)O(2), were optimized first. The system of thrombin and its 29-mer aptamer was chosen as the model. Binding parameters, namely the dissociation constant (K(d)) and the binding site number (n), were calculated. The K(d) obtained was 124.0+/-6.9 nM in agreement with the reported values. Thus, interaction analysis method based on chemiluminescently labeled aptamers as the affinity probe in CE-CL has been established. This method can be widely applied due to the ease and universality of the labeling method, simplicity of CE-CL apparatus and combination with aptamers for a wide range of targets.

A divalent cation stabilizes the active conformation of the B. subtilis RNase P x pre-tRNA complex: a role for an inner-sphere metal ion in RNase P

Metal ions interact with RNA to enhance folding, stabilize structure, and, in some cases, facilitate catalysis. Assigning functional roles to specifically bound metal ions presents a major challenge in analyzing the catalytic mechanisms of ribozymes. Bacillus subtilis ribonuclease P (RNase P), composed of a catalytically active RNA subunit (PRNA) and a small protein subunit (P protein), catalyzes the 5'-end maturation of precursor tRNAs (pre-tRNAs). Inner-sphere coordination of divalent metal ions to PRNA is essential for catalytic activity but not for the formation of the RNase P x pre-tRNA (enzyme-substrate, ES) complex. Previous studies have demonstrated that this ES complex undergoes an essential conformational change (to the ES* conformer) before the cleavage step. Here, we show that the ES* conformer is stabilized by a high-affinity divalent cation capable of inner-sphere coordination, such as Ca(II) or Mg(II). Additionally, a second, lower-affinity Mg(II) activates cleavage catalyzed by RNase P. Structural changes that occur upon binding Ca(II) to the ES complex were determined by time-resolved Förster resonance energy transfer measurements of the distances between donor-acceptor fluorophores introduced at specific locations on the P protein and pre-tRNA 5' leader. These data demonstrate that the 5' leader of pre-tRNA moves 4 to 6 A closer to the PRNA x P protein interface during the ES-to-ES* transition and suggest that the metal-dependent conformational change reorganizes the bound substrate in the active site to form a catalytically competent ES* complex.

NMR and XAS reveal an inner-sphere metal binding site in the P4 helix of the metallo-ribozyme ribonuclease P

Functionally critical metals interact with RNA through complex coordination schemes that are currently difficult to visualize at the atomic level under solution conditions. Here, we report a new approach that combines NMR and XAS to resolve and characterize metal binding in the most highly conserved P4 helix of ribonuclease P (RNase P), the ribonucleoprotein that catalyzes the divalent metal ion-dependent maturation of the 5' end of precursor tRNA. Extended X-ray absorption fine structure (EXAFS) spectroscopy reveals that the Zn(2+) bound to a P4 helix mimic is six-coordinate, with an average Zn-O/N bond distance of 2.08 A. The EXAFS data also show intense outer-shell scattering indicating that the zinc ion has inner-shell interactions with one or more RNA ligands. NMR Mn(2+) paramagnetic line broadening experiments reveal strong metal localization at residues corresponding to G378 and G379 in B. subtilis RNase P. A new "metal cocktail" chemical shift perturbation strategy involving titrations with , Zn(2+), and confirm an inner-sphere metal interaction with residues G378 and G379. These studies present a unique picture of how metals coordinate to the putative RNase P active site in solution, and shed light on the environment of an essential metal ion in RNase P. Our experimental approach presents a general method for identifying and characterizing inner-sphere metal ion binding sites in RNA in solution.

Accommodation of Ca(II) ions for catalytic activity by a group I ribozyme

The wildtype Tetrahymena ribozyme cannot catalyze detectable levels of phosphotransfer activity in vitro on an exogenous RNA substrate oligonucleotide when calcium(II) is supplied as the only available divalent ion. Nevertheless, low-error mutants of this ribozyme have been acquired through directed evolution that do have activity in 10mM CaCl(2). The mechanisms for such Ca(II) accommodation are not known. Here, we assayed the entire molecule in an effort to identify the roles of the mutations in allowing catalytic activity in Ca(II). We used four biochemical probing techniques - native-gel electrophoresis, hydroxyl radical footprinting, terbium(III) cleavage footprinting, and phosphorothioate interference mapping - to compare the solution structure of the wildtype ribozyme with that of a Ca(II)-active five-site mutant. We compared the gross folding patterns and specific metal-binding sites in both MgCl(2) and CaCl(2) solutions. We detected no large-scale folding differences between the two RNAs in either metal. However, we did discover a limited number of local folding differences, involving regions of the RNA affected by positions 42, 188, and 270. These data support the notion that Ca(II) is accommodated by the Tetrahymena ribozyme by a slight breathing at the active site, but that alterations at, near to, and distal from the active site can all contribute to Ca(II)-based activity.

Selection of fluorescent aptamer beacons that light up in the presence of zinc

In order to generate nucleic acid biosensors that could undergo a reversible conformation change in the presence of the metal zinc, a random sequence pool of single-stranded DNA was immobilized on an oligonucleotide affinity column. In the presence of zinc, those species that underwent a conformational change were released from the column, collected, and amplified. A series of negative and positive selections refined the metal specificity of the selected aptamer beacons. Since the aptamer beacons contained a fluorophore, while the bound oligonucleotide contained a quencher, zinc binding also resulted in an increase in fluorescence. One of the selected beacons, Zn-6m2, bound zinc in the low micromolar range, gave a dose-dependent fluorescence signal, and showed an approximately sixfold increase in fluorescence on zinc binding. While some cross-reactivity with cadmium was observed, it should nonetheless prove possible to use the novel selection method to generate and tune the specificity of a variety of reversible metal biosensors. Such biosensors could potentially be used for continuous monitoring of metals in environmental samples.

Evidence that binding of C5 protein to P RNA enhances ribozyme catalysis by influencing active site metal ion affinity

The RNA subunit (P RNA) of the bacterial RNase P ribonucleoprotein is a ribozyme that catalyzes the Mg-dependent hydrolysis of pre-tRNA, but it requires an essential protein cofactor (P protein) in vivo that enhances substrate binding affinities and catalytic rates in a substrate dependent manner. Previous studies of Bacillus subtilis RNase P, containing a Type B RNA subunit, showed that its cognate protein subunit increases the affinity of metal ions important for catalysis, but the functional role of these ions is unknown. Here, we demonstrate that the Mg2+ dependence of the catalytic step for Escherichia coli RNase P, which contains a more common Type A RNA subunit, is also modulated by its cognate protein subunit (C5), indicating that this property is fundamental to P protein. To monitor specifically the binding of active site metal ions, we analyzed quantitatively the rescue by Cd2+ of an inhibitory Rp phosphorothioate modification at the pre-tRNA cleavage site. The results show that binding of C5 protein increases the apparent affinity of the rescuing Cd2+, providing evidence that C5 protein enhances metal ion affinity in the active site, and thus is likely to contribute significantly to rate enhancement at physiological metal ion concentrations.

Deciphering RNA structural diversity and systematic phylogeny from microbial metagenomes

Metagenomics has been employed to systematically sequence, classify, analyze and manipulate the entire genetic material isolated from environmental samples. Finding genes within metagenomic sequences remains a formidable challenge, and noncoding RNA genes other than those encoding rRNA and tRNA are not well annotated in metagenomic projects. In this work, we identify, validate and analyze the genes coding for RNase P RNA (P RNA) from all published metagenomic projects. P RNA is the RNA subunit of a ubiquitous endoribonuclease RNase P that consists of one RNA subunit and one or more protein subunits. The bacterial P RNAs are classified into two types, Type A and Type B, based on the constituents of the structure involved in precursor tRNA binding. Archaeal P RNAs are classified into Type A and Type M, whereas the Type A is ancestral and close to Type A bacterial P RNA. Bacterial and some archaeal P RNAs are catalytically active without protein subunits, capable of cleaving precursor tRNA transcripts to produce their mature 5′-termini. We have found 328 distinctive P RNAs (320 bacterial and 8 archaeal) from all published metagenomics sequences, which led us to expand by 60% the total number of this catalytic RNA from prokaryotes. Surprisingly, all newly identified P RNAs from metagenomics sequences are Type A, i.e. neither Type B bacterial nor Type M archaeal P RNAs are found. We experimentally validate the authenticity of an archaeal P RNA from Sargasso Sea. One of the distinctive features of some new P RNAs is that the P2 stem has kinked nucleotides in its 5′ strand. We find that the single nucleotide J2/3 joint region linking the P2 and P3 stem that was used to distinguish a bacterial P RNA from an archaeal one is no longer applicable, i.e. some archaeal P RNAs have only one nucleotide in the J2/3 joint. We also discuss the phylogenetic analysis based on covariance model of P RNA that offers a few advantages over the one based on 16S rRNA.

Structural plasticity and Mg2+ binding properties of RNase P P4 from combined analysis of NMR residual dipolar couplings and motionally decoupled spin relaxation

The P4 helix is an essential element of ribonuclease P (RNase P) that is believed to bind catalytically important metals. Here, we applied a combination of NMR residual dipolar couplings (RDCs) and a recently introduced domain-elongation strategy for measuring "motionally decoupled" relaxation data to characterize the structural dynamics of the P4 helix from Bacillus subtilis RNase P. In the absence of divalent ions, the two P4 helical domains undergo small amplitude (approximately 13 degrees) collective motions about an average interhelical angle of 10 degrees. The highly conserved U7 bulge and helical residue C8, which are proposed to be important for substrate recognition and metal binding, are locally mobile at pico- to nanosecond timescales and together form the pivot point for the collective domain motions. Chemical shift mapping reveals significant association of Mg2+ ions at the P4 major groove near the flexible pivot point at residues (A5, G22, G23) previously identified to bind catalytically important metals. The Mg2+ ions do not, however, significantly alter the structure or dynamics of P4. Analysis of results in the context of available X-ray structures of the RNA component of RNase P and structural models that include the pre-tRNA substrate suggest that the internal motions observed in P4 likely facilitate adaptive changes in conformation that take place during folding and substrate recognition, possibly aided by interactions with Mg2+ ions. Our results add to a growing view supporting the existence of functionally important internal motions in RNA occurring at nanosecond timescales.

Bacterial RNase P: a new view of an ancient enzyme

Ribonuclease P (RNase P) is a ubiquitous endonuclease that catalyses the maturation of the 5' end of transfer RNA (tRNA). Although it carries out a biochemically simple reaction, RNase P is a complex ribonucleoprotein particle composed of a single large RNA and at least one protein component. In bacteria and some archaea, the RNA component of RNase P can catalyse tRNA maturation in vitro in the absence of proteins. The discovery of the catalytic activity of the bacterial RNase P RNA triggered numerous mechanistic and biochemical studies of the reactions catalysed by the RNA alone and by the holoenzyme and, in recent years, structures of individual components of the RNase P holoenzyme have been determined. The goal of the present review is to summarize what is known about the bacterial RNase P, and to bring together the recent structural results with extensive earlier biochemical and phylogenetic findings.

Evolution of High-Branching Deoxyribozymes from a Catalytic DNA with a Three-Way Junction

Here, we report the evolution of two star-shaped (five-way junction) deoxyribozymes from a catalytic DNA containing a three-way junction scaffold. The transition was shown to be a switch rather than a gradual progression. The star-shaped motifs, surprisingly, only took five selection cycles to be detected, and another four to dominate the evolving population. Chemical probing experiments indicated that the two deoxyribozymes belong to the same family despite noticeable variations in both the primary sequence and the secondary structure. Our findings not only describe the evolution of high-branching nucleic acid structures from a low-branching catalytic module, but they also illustrate the idea of deriving a rare structural motif by sampling the sequence variants of a given functional nucleic acid.

The P4 metal binding site in RNase P RNA affects active site metal affinity through substrate positioning

Although helix P4 in the catalytic domain of the RNase P ribozyme is known to coordinate magnesium ions important for activity, distinguishing between direct and indirect roles in catalysis has been difficult. Here, we provide evidence for an indirect role in catalysis by showing that while the universally conserved bulge of helix P4 is positioned 5 nt downstream of the cleavage site, changes in its structure can still purturb active site metal binding. Because changes in helix P4 also appear to alter its position relative to the pre-tRNA cleavage site, these data suggest that P4 contributes to catalytic metal ion binding through substrate positioning.

Structure of ribonuclease P--a universal ribozyme

Ribonuclease P (RNase P) is one of only two known universal ribozymes and was one of the first ribozymes to be discovered. It is involved in RNA processing, in particular the 5' maturation of tRNA. Unlike most other natural ribozymes, it recognizes and cleaves its substrate in trans. RNase P is a ribonucleoprotein complex containing one RNA subunit and as few as one protein subunit. It has been shown that, in bacteria and in some archaea, the RNA subunit alone can support catalysis. The structure and function of bacterial RNase P RNA have been studied extensively, but the detailed catalytic mechanism is not yet fully understood. Recently, structures of one of the structural domains and of the entire RNA component of RNase P from two different bacteria have been described. These structures provide the first atomic-level information on the structural assembly of the RNA component, and the regions involved in substrate recognition and catalysis. Comparison of these structures reveals a highly conserved core that comprises two universally conserved structural modules. Interestingly, the same structural core can be found in the context of different scaffolds.

Antigenomic delta ribozyme variants with mutations in the catalytic core obtained by the in vitro selection method

We have used the in vitro selection method to search for catalytically active variants of the antigenomic delta ribozyme with mutations in the regions that constitute the ribozyme active site: L3, J1/4 and J4/2. In the initial combinatorial library 16 nt positions were randomized and the library contained a full representation of all possible sequences. Following ten cycles of selection-amplification several catalytically active ribozyme variants were identified. It turned out that one-third of the variants contained only single mutation G80U and their activity was similar to that of the wild-type ribozyme. Unexpectedly, in the next one-third of the variants the C76 residue, which was proposed to play a crucial role in the ribozyme cleavage mechanism, was mutated. In these variants, however, a cytosine residue was present in a neighboring position to the polynucleotide chain. It shows that the ribozyme catalytic core possesses substantial 'structural plasticity' and the capacity of functional adaptation. Four selected ribozyme variants were subjected to more detailed analysis. It turned out that the variants differed in their relative preferences towards Mg2+, Ca2+ and Mn2+ ions. Thus, the functional properties of the variants were dependent on both the structure of their catalytic sites and divalent metal ions performing catalysis.

Structural perspective on the activation of RNase P RNA by protein

Ribonucleoprotein particles are central to numerous cellular pathways, but their study in vitro is often complicated by heterogeneity and aggregation. We describe a new technique to characterize these complexes trapped as homogeneous species in a nondenaturing gel. Using this technique, in conjunction with phosphorothioate footprinting analysis, we identify the protein-binding site and RNA folding states of ribonuclease P (RNase P), an RNA-based enzyme that, in vivo, requires a protein cofactor to catalyze the 5' maturation of precursor transfer RNA (pre-tRNA). Our results show that the protein binds to a patch of conserved RNA structure adjacent to the active site and influences the conformation of the RNA near the tRNA-binding site. The data are consistent with a role of the protein in substrate recognition and support a new model of the holoenzyme that is based on a recently solved crystal structure of RNase P RNA.

Change of RNase P RNA function by single base mutation correlates with perturbation of metal ion binding in P4 as determined by NMR spectroscopy

The solution structures of two 27 nt RNA hairpins and their complexes with cobalt(III)-hexammine [Co(NH(3))(6)(3+)] were determined by NMR spectroscopy. The RNA hairpins are variants of the P4 region from Escherichia coli RNase P RNA: a U-to-A mutant changing the identity of the bulged nucleotide, and a U-to-C, C-to-U double mutant changing only the bulge position. Structures calculated from NMR constraints show that the RNA hairpins adopt different conformations. In the U-to-C, C-to-U double mutant, the conserved bulged uridine in the P4 wild-type stem is found to be shifted in the 3'-direction by one nucleotide when compared with the wild-type structure. Co(NH(3))(6)(3+) is used as a spectroscopic probe for Mg(H(2)O)(6)(2+) binding sites because both complexes have octahedral symmetry and have similar radii. Intermolecular NOE crosspeaks between Co(NH(3))(6)(3+) and RNA protons were used to locate the site of Co(NH(3))(6)(3+) binding to both RNA hairpins. The metal ion binds in the major groove near a bulge loop in both mutants, but is shifted 3' by about one base pair in the double mutant. The change of the metal ion binding site is compared with results obtained on corresponding mutant RNase P RNA molecules as reported by Harris and co-workers (RNA, 1, 210-218).

In search of RNase P RNA from microbial genomes

A simple procedure has been developed to quickly retrieve and validate the DNA sequence encoding the RNA subunit of ribonuclease P (RNase P RNA) from microbial genomes. RNase P RNA sequences were identified from 94% of bacterial and archaeal complete genomes where previously no RNase P RNA was annotated. A sequence was found in camelpox virus, highly conserved in all orthopoxviruses (including smallpox virus), which could fold into a putative RNase P RNA in terms of conserved primary features and secondary structure. New structure features of RNase P RNA that enable one to distinguish bacteria from archaea and eukarya were found. This RNA is yet another RNA that can be a molecular criterion to divide the living world into three domains (bacteria, archaea, and eukarya). The catalytic center of this RNA, and its detection from some environmental whole genome shotgun sequences, is also discussed.

Expanded divalent metal-ion tolerance of evolved ligase ribozymes

Class I ligases are artificial ribozymes that catalyze the joining of two single-stranded RNAs. These ribozymes are between 120 and 160 nucleotides in length, making them intermediate in size for catalytic RNAs. Previous characterization of the b1-207 ribozyme suggests that it behaves similar to larger ribozymes in terms of divalent metal-ion dependence. This molecule displays a strong preference for magnesium for catalysis, and is inactive in any other metal except manganese, which actually inhibits its operation in magnesium. Here, we sought to examine the metal-ion usages of two ligases that were obtained through continuous evolution in vitro from the b1-207 sequence framework. We found an expanded catalytic range for the E(100)(#3) and B(16)(#19) ribozymes, as they are both catalytically active in calcium and strontium, and less inhibited by manganese. Though not selected for activity in these salts, the evolved ribozymes exhibit several adaptations to in vitro catalysis, and their ability to accommodate metals other than magnesium can be viewed as an example of a molecular exaptation.

Assemblage of signaling DNA enzymes with intriguing metal-ion specificities and pH dependences

We report a group of new DNA enzymes that possess a synchronized RNA-cleavage/fluorescence-signaling ability and exhibit wide-ranging metal-ion and pH dependences. These DNA catalysts were derived from a random-sequence DNA pool in a two-stage process: (1) establishment of a catalytic DNA population through repetitive rounds of in vitro selection at pH 4.0, and (2) sequence-diversification and catalytic-activity optimization through five parallel paths of in vitro evolution conducted at pH 3.0, 4.0, 5.0, 6.0, and 7.0, respectively. The deoxyribozymes were evolved to cleave the phosphodiester bond of a single ribonucleotide embedded in DNA and flanked immediately by two deoxyribonucleotides modified with a fluorophore and a quencher, respectively--a setting that synchronizes catalysis with fluorescence signaling. The most dominant catalyst from each pool was examined for metal-ion specificity, catalytic efficiency, pH dependence, and fluorescence-signaling capability. Individual catalysts have different metal-ion requirements and can generate as much as a 12-fold fluorescence enhancement upon RNA cleavage. Most of the DNA enzymes have a pH optimum coinciding with the selection pH and exhibit a rate constant approximating 1 min(-)(1) under optimal reaction conditions. The demonstration of DNA enzymes that are functional under extremely high acidity (such as pH 3 and 4) indicates that DNA has the ability to perform efficient catalysis even under harsh reaction conditions. The isolation of many new signaling DNA enzymes with broad pH optima and metal-ion specificities should facilitate the development of diverse deoxyribozyme-based biosensors.

New highly sensitive and selective catalytic DNA biosensors for metal ions

While remarkable progress has been made in developing sensors for metal ions such as Ca(II) and Zn(II), designing and synthesizing sensitive and selective metal ion sensors remains a significant challenge. Perhaps the biggest challenge is the design and synthesis of a sensor capable of specific and strong metal binding. Since our knowledge about the construction of metal-binding sites in general is limited, searching for sensors in a combinatorial way is of significant value. Therefore, we have been able to use a combinatorial method called in vitro selection to obtain catalytic DNA that can bind a metal ion of choice strongly and specifically. The metal ion selectivity of the catalytic DNA was further improved using a 'negative selection' strategy where catalytic DNA that are selective for competing metal ions are discarded in the in vitro selection processes. By labeling the resulting catalytic DNA with a fluorophore/quencher pair, we have made a new class of metal ion fluorescent sensors that are the first examples of catalytic DNA biosensors for metal ions. The sensors combine the high selectivity of catalytic DNA with the high sensitivity of fluorescent detection, and can be applied to the quantitative detection of metal ions over a wide concentration range and with high selectivity. The use of DNA sensors in detection and quantification of lead ions in environmental samples such as water from Lake Michigan has been demonstrated. DNA is stable, cost-effective, environmentally benign, and easily adaptable to optical fiber and microarray technology for device manufacture. Thus, the DNA sensors explained here hold great promise for on-site and real-time monitoring of metal ions in the fields of environmental monitoring, developmental biology, clinical toxicology, wastewater treatment, and industrial process monitoring.

Conservation of helical structure contributes to functional metal ion interactions in the catalytic domain of ribonuclease P RNA

Like protein enzymes, catalytic RNAs contain conserved structure motifs important for function. A universal feature of the catalytic domain of ribonuclease P RNA is a bulged-helix motif within the P1-P4 helix junction. Here, we show that changes in bulged nucleotide identity and position within helix P4 affect both catalysis and substrate binding, while a subset of the mutations resulted only in catalytic defects. We find that the proximity of the bulge to sites of metal ion coordination in P4 is important for catalysis; moving the bulge distal to these sites and deleting it had similarly large effects, while moving it proximal to these sites had only a moderate effect on catalysis. To test whether the effects of the mutations are linked to metal ion interactions, we used terbium-dependent cleavage of the phosphate backbone to probe metal ion-binding sites in the wild-type and mutant ribozymes. We detect cleavages at specific sites within the catalytic domain, including helix P4 and J3/4, which have previously been shown to participate directly in metal ion interactions. Mutations introduced into P4 cause local changes in the terbium cleavage pattern due to alternate metal ion-binding configurations with the helix. In addition, a bulge deletion mutation results in a 100-fold decrease in the single turnover cleavage rate constant at saturating magnesium levels, and a reduced affinity for magnesium ions important for catalysis. In light of the alternate terbium cleavage pattern in P4 caused by bulge deletion, this decreased ability to utilize magnesium ions for catalysis appears to be due to localized structural changes in the ribozyme's catalytic core that weaken metal ion interactions in P4 and J3/4. The information reported here, therefore, provides evidence that the universal conservation of the P4 structure is based in part on optimization of metal ion interactions important for catalysis.

Specific phosphorothioate substitutions probe the active site of Bacillus subtilis ribonuclease P

Ribonuclease P (RNase P) is a ribonucleoprotein that requires magnesium ions to catalyze the 5' maturation of transfer RNA. To identify interactions essential for catalysis, the properties of RNase P containing single sulfur substitutions for nonbridging phosphodiester oxygens in helix P4 of Bacillus subtilis RNase P were analyzed using transient kinetic experiments. Sulfur substitution at the nonbridging oxygens of the phosphodiester bond of nucleotide U51 only modestly affects catalysis. However, phosphorothioate substitutions at A49 and G50 decrease the cleavage rate constant enormously (300-4,000-fold for P RNA and 500-15,000-fold for RNase P holoenzyme) in magnesium without affecting the affinity of pre-tRNA(Asp), highlighting the importance of this region for catalysis. Furthermore, addition of manganese enhances pre-tRNA cleavage catalyzed by B. subtilis RNase P RNA containing an Sp phosphorothioate modification at A49, as observed for Escherichia coli P RNA [Christian et al., RNA, 2000, 6:511-519], suggesting that an essential metal ion may be coordinated at this site. In contrast, no manganese rescue is observed for the A49 Sp phosphorothioate modification in RNase P holoenzyme. These differential manganese rescue effects, along with affinity cleavage, suggest that the protein component may interact with a metal ion bound near A49 in helix P4 of P RNA.

Evidence for a polynuclear metal ion binding site in the catalytic domain of ribonuclease P RNA

Interactions with divalent metal ions are essential for the folding and function of the catalytic RNA component of the tRNA processing enzyme ribonuclease P (RNase P RNA). However, the number and location of specific metal ion interactions in this large, highly structured RNA are poorly understood. Using atomic mutagenesis and quantitative analysis of thiophilic metal ion rescue we provide evidence for metal ion interactions at the pro-R(P) and pro-S(P) non-bridging phosphate oxygens at nucleotide A67 in the universally conserved helix P4. Moreover, second-site modifications within helix P4 and the adjacent single stranded region (J3/4) provide the first evidence for metal ion interactions with nucleotide base functional groups in RNase P RNA and reveal the presence of an additional metal ion important for catalytic function. Together, these data are consistent with a cluster of metal ion interactions in the P1-P4 multi-helix junction that defines the catalytic core of the RNase P ribozyme.

Selection for catalytic function with nucleic acids

For in vitro selection of catalytic polynucleotides, each new protocol must be designed to harness the desired catalytic activity to help propel the selection process itself. This unit gives guidelines for design of in vitro selection experiments for catalytic function. It outlines several representative protocols as examples of successful selection experiments, providing a conceptual basis for the design and implementation of new selective-amplification protocols for nucleic acids.

Phylogenetic-comparative analysis of the eukaryal ribonuclease P RNA

Ribonuclease P (RNase P) is the ribonucleoprotein enzyme that cleaves 5'-leader sequences from precursor-tRNAs. Bacterial and eukaryal RNase P RNAs differ fundamentally in that the former, but not the latter, are capable of catalyzing pre-tRNA maturation in vitro in the absence of proteins. An explanation of these functional differences will be assisted by a detailed comparison of bacterial and eukaryal RNase P RNA structures. However, the structures of eukaryal RNase P RNAs remain poorly characterized, compared to their bacterial and archaeal homologs. Hence, we have taken a phylogenetic-comparative approach to refine the secondary structures of eukaryal RNase P RNAs. To this end, 20 new RNase P RNA sequences have been determined from species of ascomycetous fungi representative of the genera Arxiozyma, Clavispora, Kluyveromyces, Pichia, Saccharomyces, Saccharomycopsis, Torulaspora, Wickerhamia, and Zygosaccharomyces. Phylogenetic-comparative analysis of these and other sequences refines previous eukaryal RNase P RNA secondary structure models. Patterns of sequence conservation and length variation refine the minimum-consensus model of the core eukaryal RNA structure. In comparison to bacterial RNase P RNAs, the eukaryal homologs lack RNA structural elements thought to be critical for both substrate binding and catalysis. Nonetheless, the eukaryal RNA retains the main features of the catalytic core of the bacterial RNase P. This indicates that the eukaryal RNA remains intrinsically a ribozyme.

Solution structure and metal-ion binding of the P4 element from bacterial RNase P RNA

We determined the solution structure of two 27-nt RNA hairpins and their complexes with cobalt(III)-hexammine (Co(NH3)3+(6)) by NMR spectroscopy. The RNA hairpins used in this study are the P4 region from Escherichia coli RNase P RNA and a C-to-U mutant that confers altered divalent metal-ion specificity (Ca2+ replaces Mg2+) for catalytic activity of this ribozyme. Co(NH3)3+(6) is a useful spectroscopic probe for Mg(H2O)2+(6)-binding sites because both complexes have octahedral symmetry and have similar radii. The thermodynamics of binding to both RNA hairpins was studied using chemical shift changes upon titration with Mg2+, Ca2+, and Co(NH3)3+(6). We found that the equilibrium binding constants for each of the metal ions was essentially unchanged when the P4 model RNA hairpin was mutated, although the NMR structures show that the RNA hairpins adopt different conformations. In the C-to-U mutant a C.G base pair is replaced by U.G, and the conserved bulged uridine in the P4 wild-type stem shifts in the 3' direction by 1 nt. Intermolecular NOE cross-peaks between Co(NH3)3+(6) and RNA protons were used to locate the site of Co(NH3)3+(6) binding to both RNA hairpins. The metal ion binds in the major groove near a bulge loop, but is shifted 5' by more than 1 bp in the mutant. The change of the metal-ion binding site provides a possible explanation for changes in catalytic activity of the mutant RNase P in the presence of Ca2+.

In vitro selection of functional nucleic acids

In vitro selection allows rare functional RNA or DNA molecules to be isolated from pools of over 10(15) different sequences. This approach has been used to identify RNA and DNA ligands for numerous small molecules, and recent three-dimensional structure solutions have revealed the basis for ligand recognition in several cases. By selecting high-affinity and -specificity nucleic acid ligands for proteins, promising new therapeutic and diagnostic reagents have been identified. Selection experiments have also been carried out to identify ribozymes that catalyze a variety of chemical transformations, including RNA cleavage, ligation, and synthesis, as well as alkylation and acyl-transfer reactions and N-glycosidic and peptide bond formation. The existence of such RNA enzymes supports the notion that ribozymes could have directed a primitive metabolism before the evolution of protein synthesis. New in vitro protein selection techniques should allow for a direct comparison of the frequency of ligand binding and catalytic structures in pools of random sequence polynucleotides versus polypeptides.

RNase P ribozymes selected in vitro to cleave a viral mRNA effectively inhibit its expression in cell culture

An in vitro selection procedure was used to select RNase P ribozyme variants that efficiently cleaved the sequence of the mRNA encoding thymidine kinase of herpes simplex virus 1. Of the 45 selected variants sequenced, 25 ribozymes carried a common mutation at nucleotides 224 and 225 of RNase P catalytic RNA from Escherichia coli (G(224)G(225) --> AA). These selected ribozymes exhibited at least 10 times higher cleavage efficiency (k(cat)/K(m)) than that derived from the wild type ribozyme. Our results suggest that the mutated A(224)A(225) are in close proximity to the substrate and enhance substrate binding of the ribozyme. When these ribozyme variants were expressed in herpes simplex virus 1-infected cells, the levels of thymidine kinase mRNA and protein were reduced by 95-99%. Our study provides the first direct evidence that RNase P ribozyme variants isolated by the selection procedure can be used for the construction of gene-targeting ribozymes that are highly effective in tissue culture. These results demonstrate the potential for using RNase P ribozymes as gene-targeting agents against any mRNA sequences, and using the selection procedure as a general approach for the engineering of RNase P ribozymes.

Helix P4 is a divalent metal ion binding site in the conserved core of the ribonuclease P ribozyme

The ribonuclease P ribozyme (RNase P RNA), like other large ribozymes, requires magnesium ions for folding and catalytic function; however, specific sites of metal ion coordination in RNase P RNA are not well defined. To identify and characterize individual nucleotide functional groups in the RNase P ribozyme that participate in catalytic function, we employed self-cleaving ribozyme-substrate conjugates that facilitate measurement of the effects of individual functional group modifications. The self-cleavage rates and pH dependence of two different ribozyme-substrate conjugates were determined and found to be similar to the single turnover kinetics of the native ribozyme. Using site-specific phosphorothioate substitutions, we provide evidence for metal ion coordination at the pro-Rp phosphate oxygen of A67, in the highly conserved helix P4, that was previously suggested by modification-interference experiments. In addition, we detect a new metal ion coordination site at the pro-Sp phosphate oxygen of A67. These findings, in combination with the proximity of A67 to the pre-tRNA cleavage site, support the conclusion that an important role of helix P4 in the RNase P ribozyme is to position divalent metal ions that are required for catalysis.

In vitro selection and characterization of a highly efficient Zn(II)-dependent RNA-cleaving deoxyribozyme

A group of highly efficient Zn(II)-dependent RNA-cleaving deoxyribozymes has been obtained through in vitro selection. They share a common motif with the '8-17' deoxyribozyme isolated under different conditions, including different design of the random pool and metal ion cofactor. We found that this commonly selected motif can efficiently cleave both RNA and DNA/RNA chimeric substrates. It can cleave any substrate containing rNG (where rN is any ribo-nucleotide base and G can be either ribo- or deoxy-ribo-G). The pH profile and reaction products of this deoxyribozyme are similar to those reported for hammerhead ribozyme. This deoxyribozyme has higher activity in the presence of transition metal ions compared to alkaline earth metal ions. At saturating concentrations of Zn(2+), the cleavage rate is 1.35 min(-1)at pH 6.0; based on pH profile this rate is estimated to be at least approximately 30 times faster at pH 7.5, where most assays of Mg(2+)-dependent DNA and RNA enzymes are carried out. This work represents a comprehensive characterization of a nucleic acid-based endonuclease that prefers transition metal ions to alkaline earth metal ions. The results demonstrate that nucleic acid enzymes are capable of binding transition metal ions such as Zn(2+)with high affinity, and the resulting enzymes are more efficient at RNA cleavage than most Mg(2+)-dependent nucleic acid enzymes under similar conditions.

Design and isolation of ribozyme-substrate pairs using RNase P-based ribozymes containing altered substrate binding sites

Substrate recognition and cleavage by the bacterial RNase P RNA requires two domains, a specificity domain, or S-domain, and a catalytic domain, or C-domain. The S-domain binds the T stem-loop region in a pre-tRNA substrate to confer specificity for tRNA substrates. In this work, the entire S-domain of the Bacillus subtilis RNase P RNA is replaced with an artificial substrate binding module. New RNA substrates are isolated by in vitro selection using two libraries containing random regions of 60 nt. At the end of the selection, the cleavage rates of the substrate library are approximately 0.7 min(-1)in 10 mM MgCl(2)at 37 degrees C, approximately 4-fold better than the cleavage of a pre-tRNA substrate by the wild-type RNase P RNA under the same conditions. The contribution of the S-domain replacement to the catalytic efficiency is from 6- to 22 000-fold. Chemical and nuclease mapping of two ribozyme-product complexes shows that this contribution correlates with direct interactions between the S-domain replacement and the selected substrate. These results demonstrate the feasibility of design and isolation of RNase P-based, matching ribozyme-substrate pairs without prior knowledge of the sequence or structure of the interactive modules in the ribozyme or substrate.

Acquisition of novel catalytic activity by the M1 RNA ribozyme: the cost of molecular adaptation

The ribonucleoprotein RNase P is a critical component of metabolism in all known organisms. In Escherichia coli, RNase P processes a vast array of substrates, including precursor-tRNAs and precursor 4. 5S RNA. In order to understand how such catalytic versatility is achieved and how novel catalytic activity can be acquired, we evolve the M1 RNA ribozyme (the catalytic component of E. coli RNase P) in vitro for cleavage of a DNA substrate. In so doing, we probe the consequences of enhancing catalytic activity on a novel substrate and investigate the cost this versatile enzyme pays for molecular adaptation. A total of 25 generations of in vitro evolution yield a population showing more than a 1000-fold increase in DNA substrate cleavage efficiency (kcat/KM) relative to wild-type M1 RNA. This enhancement is accompanied by a significant reduction in the ability of evolved ribozymes to process the ptRNA class of substrates but also a contrasting increase in activity on the p4.5S RNA class of substrates. This change in the catalytic versatility of the evolved ribozymes suggests that the acquired activity comes at the cost of substrate versatility, and indicates that E. coli RNase P catalytic flexibility is maintained in vivo by selection for the processing of multiple substrates. M1 RNA derivatives enhance cleavage of the DNA substrate by accelerating the catalytic step (kcat) of DNA cleavage, although overall processing efficiency is offset by reduced substrate binding. The enhanced ability to cleave a DNA substrate cannot be readily traced to any of the predominant mutations found in the evolved population, and must instead be due to multiple sequence changes dispersed throughout the molecule. This conclusion underscores the difficulty of correlating observed mutations with changes in catalytic behavior, even in simple biological catalysts for which three-dimensional models are available.

Guanosine 2-NH2 groups of Escherichia coli RNase P RNA involved in intramolecular tertiary contacts and direct interactions with tRNA

We have identified by nucleotide analog interference mapping (NAIM) exocyclic NH2 groups of guanosines in RNase P RNA from Escherichia coli that are important for tRNA binding. The majority of affected guanosines represent phylogenetically conserved nucleotides. Several sites of interference could be assigned to direct contacts with the tRNA moiety, whereas others were interpreted as reflecting indirect effects on tRNA binding due to the disruption of tertiary contacts within the catalytic RNA. Our results support the involvement of the 2-NH2 groups of G292/G293 in pairing with C74 and C75 of tRNA CCA-termini, as well as formation of two consecutive base triples involving C75 and A76 of CCA-ends interacting with G292/A258 and G291/G259, respectively. Moreover, we present first biochemical evidence for two tertiary contacts (L18/P8 and L8/P4) within the catalytic RNA, whose formation has been postulated previously on the basis of phylogenetic comparative analyses. The tRNA binding interference data obtained in this and our previous studies are consistent with the formation of a consecutive nucleotide triple and quadruple between the tetraloop L18 and helix P8. Formation of the nucleotide triple (G316 and A94:U104 in wild-type E. coli RNase P RNA) is also supported by mutational analysis. For the mutant RNase P RNA carrying a G94:C104 double mutation, an additional G316-to-A mutation resulted in a restoration of binding affinity for mature and precursor tRNA.

In vitro selection of the Naegleria GIR1 ribozyme identifies three base changes that dramatically improve activity

NanGIR1 is a member of a new class of group I ribozymes whose putative biological function is site-specific hydrolysis at an internal processing site (IPS). We have previously shown that NanGIR1 requires 1 M KCl for maximal activity, which is nevertheless slow (0.03 min(-1)). We used in vitro selection and an RNA pool with approximately nine mutations per molecule to select for faster hydrolysis at the IPS in 100 mM KCl. After eight rounds of selection, GIR1 variants were isolated that catalyzed hydrolysis at 300-fold greater rates than NanGIR1 RNA. Although not required by the selection, many of the resultant RNAs had increased thermal stability relative to the parent RNA, and had a more compact structure as evidenced by their faster migration in native gels. Although a wide spectrum of mutations was found in generation 8 clones, only two mutations, U149C and U153C, were common to greater than 95% of the molecules. These and one other mutation, G32A, are sufficient to increase activity 50-fold. All three mutations lie within or proximal to the P15 pseudoknot, a structural signature of GIR1 RNAs that was previously shown to be important for catalytic activity. Overall, our findings show that variants of the Naegleria GIR1 ribozyme with dramatically improved activity lie very close to the natural GIR1 in sequence space. Furthermore, the selection for higher activity appeared to select for increased structural stability.

Order, dynamics and metal-binding in the lead-dependent ribozyme

The in vitro selected lead-dependent ribozyme is among the smallest and simplest of the known catalytic RNA motifs and has a unique metal ion specificity for divalent lead. The conformation and dynamics of this ribozyme are analyzed here by NMR and chemical probing experiments. Complete assignments of the 1H, 13C, and 15N resonances have been made, and the NMR chemical shift changes in the presence of Pb2+, Mg2+ or high concentrations of Na+ show that there is no significant structural change upon addition of either activating (Pb2+) or inhibitory (Mg2+) divalent ions. The 13C NMR relaxation data indicate substantial dynamic fluctuations on various time-scales for active-site residues in this ribozyme. The combination of chemical probing and NMR experiments reveals a picture of the active site for the lead-dependent ribozyme that has both ordered and dynamic features.

Ribonuclease P: unity and diversity in a tRNA processing ribozyme

Ribonuclease P (RNase P) is the endoribonuclease that generates the mature 5'-ends of tRNA by removal of the 5'-leader elements of precursor-tRNAs. This enzyme has been characterized from representatives of all three domains of life (Archaea, Bacteria, and Eucarya) (1) as well as from mitochondria and chloroplasts. The cellular and mitochondrial RNase Ps are ribonucleoproteins, whereas the most extensively studied chloroplast RNase P (from spinach) is composed solely of protein. Remarkably, the RNA subunit of bacterial RNase P is catalytically active in vitro in the absence of the protein subunit (2). Although RNA-only activity has not been demonstrated for the archael, eucaryal, or mitochondrial RNAs, comparative sequence analysis has established that these RNAs are homologous (of common ancestry) to bacterial RNA. RNase P holoenzymes vary greatly in organizational complexity across the phylogenetic domains, primarily because of differences in the RNase P protein subunits: Mitochondrial, archaeal, and eucaryal holoenzymes contain larger, and perhaps more numerous, protein subunits than do the bacterial holoenzymes. However, that the nonbacterial RNase P RNAs retain significant structural similarity to their catalytically active bacterial counterparts indicates that the RNA remains the catalytic center of the enzyme.

Identification by modification-interference of purine N-7 and ribose 2'-OH groups critical for catalysis by bacterial ribonuclease P

The RNA subunit of bacterial ribonuclease P is a catalytic RNA that cleaves precursor tRNAs to generate mature tRNA 5' ends. A self-cleaving RNase P RNA-substrate conjugate was used in modification-interference analysis to identify purine N-7 and ribose 2'-hydroxyl functional groups that are critical to catalysis. We identify six adenine N-7 groups and only one 2'-hydroxyl that, when substituted with 7-deazaadenine or 2'-deoxy analogues, respectively, reduce the RNase P catalytic rate approximately 10-fold at pH 8 and limiting concentration of magnesium. Two sites of low-level interference by phosphorothioate modification were detected in addition to the four sites of strong interference documented previously. These modification-interference results, the absolute phylogenetic conservation of these functional groups in bacterial RNase P RNA, their proximity to the substrate-phosphate in the tertiary structure of the ribozyme-substrate complex, and the importance of some of the sites for binding of catalytic magnesium all implicate these functional groups as components of the RNase P active site. Five of the 7-deazaadenine interferences are suppressed at pH 6, where the hydrolytic step is rate-limiting, or at saturating concentrations of magnesium. We propose, therefore, that these base functional groups are specifically engaged in the catalytic center of RNase P RNA, possibly by involvement in magnesium-dependent folding. One 7-deazaadenine interference and one 2'-deoxy-interference, although partially suppressed at pH 6, are not suppressed at saturating magnesium concentrations. This implicates these groups in magnesium-independent folding of the catalytic substructure of the ribozyme.