Site-directed mutagenesis of conserved aspartates, glutamates and arginines in the active site region of Escherichia coli DNA topoisomerase I

Mechanism of Type IA Topoisomerases

Topoisomerases in the type IA subfamily can catalyze change in topology for both DNA and RNA substrates. A type IA topoisomerase may have been present in a last universal common ancestor (LUCA) with an RNA genome. Type IA topoisomerases have since evolved to catalyze the resolution of topological barriers encountered by genomes that require the passing of nucleic acid strand(s) through a break on a single DNA or RNA strand. Here, based on available structural and biochemical data, we discuss how a type IA topoisomerase may recognize and bind single-stranded DNA or RNA to initiate its required catalytic function. Active site residues assist in the nucleophilic attack of a phosphodiester bond between two nucleotides to form a covalent intermediate with a 5'-phosphotyrosine linkage to the cleaved nucleic acid. A divalent ion interaction helps to position the 3'-hydroxyl group at the precise location required for the cleaved phosphodiester bond to be rejoined following the passage of another nucleic acid strand through the break. In addition to type IA topoisomerase structures observed by X-ray crystallography, we now have evidence from biophysical studies for the dynamic conformations that are required for type IA topoisomerases to catalyze the change in the topology of the nucleic acid substrates.

Investigating mycobacterial topoisomerase I mechanism from the analysis of metal and DNA substrate interactions at the active site

We have obtained new crystal structures of Mycobacterium tuberculosis topoisomerase I, including structures with ssDNA substrate bound to the active site, with and without Mg²⁺ ion present. Significant enzyme conformational changes upon DNA binding place the catalytic tyrosine in a pre-transition state position for cleavage of a specific phosphodiester linkage. Meanwhile, the enzyme/DNA complex with bound Mg²⁺ ion may represent the post-transition state for religation in the enzyme's multiple-step DNA relaxation catalytic cycle. The first observation of Mg²⁺ ion coordinated with the TOPRIM residues and DNA phosphate in a type IA topoisomerase active site allows assignment of likely catalytic role for the metal and draws a comparison to the proposed mechanism for type IIA topoisomerases. The critical function of a strictly conserved glutamic acid in the DNA cleavage step was assessed through site-directed mutagenesis. The functions assigned to the observed Mg²⁺ ion can account for the metal requirement for DNA rejoining but not DNA cleavage by type IA topoisomerases. This work provides new structural insights into a more stringent requirement for DNA rejoining versus cleavage in the catalytic cycle of this essential enzyme, and further establishes the potential for selective interference of DNA rejoining by this validated TB drug target.

PPEF: A bisbenzimdazole potent antimicrobial agent interacts at acidic triad of catalytic domain of E. coli topoisomerase IA

BACKGROUND

Topoisomerase is a well known target to develop effective antibacterial agents. In pursuance of searching novel antibacterial agents, we have established a novel bisbenzimidazole (PPEF) as potent E. coli topoisomerase IA poison inhibitor.

METHODS

In order to gain insights into the mechanism of action of PPEF and understanding protein-ligand interactions, we have produced wild type EcTopo 67 N-terminal domain (catalytic domain) and its six mutant proteins at acidic triad (D111, D113, E115). The DDE motif is replaced by alanine (A) to create three single mutants: D111A, D113A, E115A and three double mutants: D111A-D113A, D113A-E115A and D111A-E115A.

RESULTS

Calorimetric study of PPEF with single mutants showed 10 fold lower affinity than that of wild type EcTopo 67 (7.32 × 10⁶ M^-1for wild type, 0.89 × 10⁶ M^-1for D111A) and 100 fold lower binding with double mutant D113A-E115A (0.02 × 10⁶ M^-1) was observed. The mutated proteins showed different CD signature as compared to wild type protein. CD and fluorescence titrations were done to study the interaction between EcTopo 67 and ligands. Molecular docking study validated that PPEF has decreased binding affinity towards mutated enzymes as compared to wild type.

CONCLUSION

The overall study reveals that PPEF binds to D113 and E115 of acidic triad of EcTopo 67. Point mutations decrease binding affinity of PPEF towards DDE motif of topoisomerase.

GENERAL SIGNIFICANCE

This study concludes PPEF as poison inhibitor of E. coli Topoisomerase IA, which binds to acidic triad of topoisomerase IA, responsible for its function. PPEF can be considered as therapeutic agent against bacteria.

Biochemical characterization of the topoisomerase domain of Methanopyrus kandleri topoisomerase V

Topoisomerases are ubiquitous enzymes that modify the topological state of DNA inside the cell and are essential for several cellular processes. Topoisomerase V is the sole member of the type IC topoisomerase subtype. The topoisomerase domain has a unique fold among topoisomerases, and the putative active site residues show a distinct arrangement. The present study was aimed at identifying the roles of the putative active site residues in the DNA cleavage/religation process. Residues Arg-131, Arg-144, His-200, Glu-215, Lys-218, and Tyr-226 were mutated individually to a series of conservative and non-conservative amino acids, and the DNA relaxation activity at different pH values, times, and enzyme concentrations was compared with wild-type activity. The results suggest that Arg-144 is essential for protein stability because any substitution at this position was deleterious and that Arg-131 and His-200 are involved in transition state stabilization. Glu-215 reduces the DNA binding ability of topoisomerase V, especially in shorter fragments with fewer helix-hairpin-helix DNA binding motifs. Finally, Lys-218 appears to play a direct role in catalysis but not in charge stabilization of the protein-DNA intermediate complex. The results suggest that although catalytically important residues are oriented in different fashions in the active sites of type IB and type IC topoisomerases, similar amino acids play equivalent roles in both of these subtypes of enzymes, showing convergent evolution of the catalytic mechanism.

Carboxyl terminal domain basic amino acids of mycobacterial topoisomerase I bind DNA to promote strand passage

Bacterial DNA topoisomerase I (topoI) carries out relaxation of negatively supercoiled DNA through a series of orchestrated steps, DNA binding, cleavage, strand passage and religation. The N-terminal domain (NTD) of the type IA topoisomerases harbor DNA cleavage and religation activities, but the carboxyl terminal domain (CTD) is highly diverse. Most of these enzymes contain a varied number of Zn(2+) finger motifs in the CTD. The Zn(2+) finger motifs were found to be essential in Escherichia coli topoI but dispensable in the Thermotoga maritima enzyme. Although, the CTD of mycobacterial topoI lacks Zn(2+) fingers, it is indispensable for the DNA relaxation activity of the enzyme. The divergent CTD harbors three stretches of basic amino acids needed for the strand passage step of the reaction as demonstrated by a new assay. We also show that the basic amino acids constitute an independent DNA-binding site apart from the NTD and assist the simultaneous binding of two molecules of DNA to the enzyme, as required during the catalytic step. Although the NTD binds to DNA in a site-specific fashion to carry out DNA cleavage and religation, the basic residues in CTD bind to non-scissile DNA in a sequence-independent manner to promote the crucial strand passage step during DNA relaxation. The loss of Zn(2+) fingers from the mycobacterial topoI could be associated with Zn(2+) export and homeostasis.

New mechanistic and functional insights into DNA topoisomerases

DNA topoisomerases are nature's tools for resolving the unique problems of DNA entanglement that occur owing to unwinding and rewinding of the DNA helix during replication, transcription, recombination, repair, and chromatin remodeling. These enzymes perform topological transformations by providing a transient DNA break, formed by a covalent adduct with the enzyme, through which strand passage can occur. The active site tyrosine is responsible for initiating two transesterifications to cleave and then religate the DNA backbone. The cleavage reaction intermediate is exploited by cytotoxic agents, which have important applications as antibiotics and anticancer drugs. The reactions mediated by these enzymes can also be regulated by their binding partners; one example is a DNA helicase capable of modulating the directionality of strand passage, enabling important functions like reannealing denatured DNA and resolving recombination intermediates. In this review, we cover recent advances in mechanistic insights into topoisomerases and their various cellular functions.

Methanosarcina acetivorans C2A topoisomerase IIIα, an archaeal enzyme with promiscuity in divalent cation dependence

Topoisomerases play a fundamental role in genome stability, DNA replication and repair. As a result, topoisomerases have served as therapeutic targets of interest in Eukarya and Bacteria, two of the three domains of life. Since members of Archaea, the third domain of life, have not been implicated in any diseased state to-date, there is a paucity of data on archaeal topoisomerases. Here we report Methanosarcina acetivorans TopoIIIα (MacTopoIIIα) as the first biochemically characterized mesophilic archaeal topoisomerase. Maximal activity for MacTopoIIIα was elicited at 30-35°C and 100 mM NaCl. As little as 10 fmol of the enzyme initiated DNA relaxation, and NaCl concentrations above 250 mM inhibited this activity. The present study also provides the first evidence that a type IA Topoisomerase has activity in the presence of all divalent cations tested (Mg(2+), Ca(2+), Sr(2+), Ba(2+), Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+) and Cd(2+)). Activity profiles were, however, specific to each metal. Known type I (ssDNA and camptothecin) and type II (etoposide, novobiocin and nalidixic acid) inhibitors with different mechanisms of action were used to demonstrate that MacTopoIIIα is a type IA topoisomerase. Alignment of MacTopoIIIα with characterized topoisomerases identified Y317 as the putative catalytic residue, and a Y317F mutation ablated DNA relaxation activity, demonstrating that Y317 is essential for catalysis. As the role of Domain V (C-terminal domain) is unclear, MacTopoIIIα was aligned with the canonical E. coli TopoI 67 kDa fragment in order to construct an N-terminal (1-586) and a C-terminal (587-752) fragment for analysis. Activity could neither be elicited from the fragments individually nor reconstituted from a mixture of the fragments, suggesting that native folding is impaired when the two fragments are expressed separately. Evidence that each of the split domains plays a role in Zn(2+) binding of the enzyme is also provided.

Crystal structure of a covalent intermediate in DNA cleavage and rejoining by Escherichia coli DNA topoisomerase I

DNA topoisomerases control DNA topology by breaking and rejoining DNA strands via covalent complexes with cleaved DNA substrate as catalytic intermediates. Here we report the structure of Escherichia coli topoisomerase I catalytic domain (residues 2-695) in covalent complex with a cleaved single-stranded oligonucleotide substrate, refined to 2.3-Å resolution. The enzyme-substrate intermediate formed after strand cleavage was captured due to the presence of the D111N mutation. This structure of the covalent topoisomerase-DNA intermediate, previously elusive for type IA topoisomerases, shows distinct conformational changes from the structure of the enzyme without bound DNA and provides detailed understanding of the covalent catalysis required for strand cleavage to take place. The portion of cleaved DNA 5' to the site of cleavage is anchored tightly with extensive noncovalent protein-DNA interactions as predicted by the "enzyme-bridged" model. Distortion of the scissile strand at the -4 position 5' to the cleavage site allows specific selectivity of a cytosine base in the binding pocket. Many antibacterial and anticancer drugs initiate cell killing by trapping the covalent complexes formed by topoisomerases. We have demonstrated in previous mutagenesis studies that accumulation of the covalent complex of bacterial topoisomerase I is bactericidal. This structure of the covalent intermediate provides the basis for the design of novel antibiotics that can trap the enzyme after formation of the covalent complex.

The strictly conserved Arg-321 residue in the active site of Escherichia coli topoisomerase I plays a critical role in DNA rejoining

The strictly conserved arginine residue proximal to the active site tyrosine of type IA topoisomerases is required for the relaxation of supercoiled DNA and was hypothesized to be required for positioning of the scissile phosphate for DNA cleavage to take place. Mutants of recombinant Yersinia pestis topoisomerase I with hydrophobic substitutions at this position were found in genetic screening to exhibit a dominant lethal phenotype, resulting in drastic loss in Escherichia coli viability when overexpressed. In depth biochemical analysis of E. coli topoisomerase I with the corresponding Arg-321 mutation showed that DNA cleavage can still take place in the absence of this arginine function if Mg(2+) is present to enhance the interaction of the enzyme with the scissile phosphate. However, DNA rejoining is inhibited in the absence of this conserved arginine, resulting in accumulation of the cleaved covalent intermediate and loss of relaxation activity. These new experimental results demonstrate that catalysis of DNA rejoining by type IA topoisomerases has a more stringent requirement than DNA cleavage. In addition to the divalent metal ions, the side chain of this arginine residue is required for the precise positioning of the phosphotyrosine linkage for nucleophilic attack by the 3'-OH end to result in DNA rejoining. Small molecules that can interfere or distort the enzyme-DNA interactions required for DNA rejoining by bacterial type IA topoisomerases could be developed into novel antibacterial drugs.

The DNA relaxation activity and covalent complex accumulation of Mycobacterium tuberculosis topoisomerase I can be assayed in Escherichia coli: application for identification of potential FRET-dye labeling sites

Background

Mycobacterium tuberculosis topoisomerase I (MtTOP1) and Escherichia coli topoisomerase I have highly homologous transesterification domains, but the two enzymes have distinctly different C-terminal domains. To investigate the structure-function of MtTOP1 and to target its activity for development of new TB therapy, it is desirable to have a rapid genetic assay for its catalytic activity, and potential bactericidal consequence from accumulation of its covalent complex.

Results

We show that plasmid-encoded recombinant MtTOP1 can complement the temperature sensitive topA function of E. coli strain AS17. Moreover, expression of MtTOP1-G116 S enzyme with the TOPRIM mutation that inhibits DNA religation results in SOS induction and loss of viability in E. coli. The absence of cysteine residues in the MtTOP1 enzyme makes it an attractive system for introduction of potentially informative chemical or spectroscopic probes at specific positions via cysteine mutagenesis. Such probes could be useful for development of high throughput screening (HTS) assays. We employed the AS17 complementation system to screen for sites in MtTOP1 that can tolerate cysteine substitution without loss of complementation function. These cysteine substitution mutants were confirmed to have retained the relaxation activity. One such mutant of MtTOP1 was utilized for fluorescence probe incorporation and fluorescence resonance energy transfer measurement with fluorophore-labeled oligonucleotide substrate.

Conclusions

The DNA relaxation and cleavage complex accumulation of M. tuberculosis topoisomerase I can be measured with genetic assays in E. coli, facilitating rapid analysis of its activities, and discovery of new TB therapy targeting this essential enzyme.

Deciphering the distinct role for the metal coordination motif in the catalytic activity of Mycobacterium smegmatis topoisomerase I

Mycobacterium smegmatis topoisomerase I (MstopoI) is distinct from typical type IA topoisomerases. The enzyme binds to both single- and double-stranded DNA with high affinity, making specific contacts. The enzyme comprises conserved regions similar to type IA topoisomerases from Escherichia coli and other eubacteria but lacks the typically found zinc fingers in the carboxy-terminal domain. The enzyme can perform DNA cleavage in the absence of Mg(2+), but religation needs exogenously added Mg(2+). One molecule of Mg(2+) tightly bound to the enzyme has no role in DNA cleavage but is needed only for the religation reaction. The toprim (topoisomerase-primase) domain in MstopoI comprising the Mg(2+) binding pocket, conserved in both type IA and type II topoisomerases, was subjected to mutagenesis to understand the role of Mg(2+) in different steps of the reaction. The residues D108, D110, and E112 of the enzyme, which form the acidic triad in the DXDXE motif, were changed to alanines. D108A mutation resulted in an enzyme that is Mg(2+) dependent for DNA cleavage unlike MstopoI and exhibited enhanced DNA cleavage property and reduced religation activity. The mutant was toxic for cell growth, most likely due to the imbalance in cleavage-religation equilibrium. In contrast, the E112A mutant behaved like wild-type enzyme, cleaving DNA in a Mg(2)(+)-independent fashion, albeit to a reduced extent. Intra- and intermolecular religation assays indicated specific roles for D108 and E112 residues during the reaction. Together, these results indicate that the D108 residue has a major role during cleavage and religation, while E112 is important for enhancing the efficiency of cleavage. Thus, although architecturally and mechanistically similar to topoisomerase I from E. coli, the metal coordination pattern of the mycobacterial enzyme is distinct, opening up avenues to exploit the enzyme to develop inhibitors.

Structural studies of type I topoisomerases

Topoisomerases are ubiquitous proteins found in all three domains of life. They change the topology of DNA via transient breaks on either one or two of the DNA strands to allow passage of another single or double DNA strand through the break. Topoisomerases are classified into two types: type I enzymes cleave one DNA strand and pass either one or two DNA strands through the break before resealing it, while type II molecules cleave both DNA strands in concert and pass another double strand through the break followed by religation of the double strand break. Here we review recent work on the structure of type I enzymes. These structural studies are providing atomic details that, together with the existing wealth of biochemical and biophysical data, are bringing our understanding of the mechanism of action of these enzymes to the atomic level.

DNA topoisomerases: harnessing and constraining energy to govern chromosome topology

DNA topoisomerases are a diverse set of essential enzymes responsible for maintaining chromosomes in an appropriate topological state. Although they vary considerably in structure and mechanism, the partnership between topoisomerases and DNA has engendered commonalities in how these enzymes engage nucleic acid substrates and control DNA strand manipulations. All topoisomerases can harness the free energy stored in supercoiled DNA to drive their reactions; some further use the energy of ATP to alter the topology of DNA away from an enzyme-free equilibrium ground state. In the cell, topoisomerases regulate DNA supercoiling and unlink tangled nucleic acid strands to actively maintain chromosomes in a topological state commensurate with particular replicative and transcriptional needs. To carry out these reactions, topoisomerases rely on dynamic macromolecular contacts that alternate between associated and dissociated states throughout the catalytic cycle. In this review, we describe how structural and biochemical studies have furthered our understanding of DNA topoisomerases, with an emphasis on how these complex molecular machines use interfacial interactions to harness and constrain the energy required to manage DNA topology.

Crystal structure and putative function of small Toprim domain-containing protein from Bacillus stearothermophilus

The crystal structure of the Midwest Center for Structural Genomics target APC35832, a 14.7-kDa cytosolic protein from Bacillus stearothermophilus, has been determined at 1.3 A resolution by the single anomalous diffraction method from a mercury soaked crystal. The APC35832 protein is a representative of large group of bacterial and archeal proteins entirely consisting of the Toprim (topoisomerase-primase) domain. This domain is found in the catalytic centers of many enzymes catalyzing phosphodiester bond formation or cleavage, but the function of small Toprim domain proteins remains unknown. Consistent with the sequence analysis, the APC35832 structure shows a conserved Toprim fold, with a central 4-stranded parallel beta-sheet surrounded by four alpha-helixes. Comparison of the APC35832 structure with its closest structural homolog, the catalytic core of bacteriophage T7 primase, revealed structural conservation of a metal binding site and isothermal titration calorimetry indicates that APC35832 binds Mg2+ with a sub-millimolar dissociation constant (K(d)). The APC35832-Mg2+ complex structure was determined at 1.65 A and reveals the role of conserved acidic residues in Mg2+ ion coordination. The structural similarities to other Toprim domain containing proteins and potential function and substrates of APC35832 are discussed in this article.

Indispensable, Functionally Complementing N and C-terminal Domains Constitute Site-specific Topoisomerase I

Mycobacterium smegmatis topoisomerase I differs from the typical type IA topoisomerase in many properties. The enzyme recognizes both single and double-stranded DNA with high affinity and makes sequence-specific contacts during DNA relaxation reaction. The enzyme has a conserved N-terminal domain and a highly varied C-terminal domain, which lacks the characteristic zinc binding motifs found in most of the type I eubacterial enzymes. The roles of the individual domains of the enzyme in the topoisomerase I catalyzed reactions were examined by comparing the properties of full-length topoisomerase I with those of truncated polypeptides lacking the conserved N-terminal or the divergent C-terminal region. The N-terminal larger fragment retained the site-specific binding, DNA cleavage and religation properties, hallmark characteristics of the full-length M.smegmatis topoisomerase I. In contrast, the non-conserved C-terminal fragment lacking the typical DNA binding motif, exhibited non-specific DNA binding behaviour. The two polypeptide fragments, on their own do not catalyze DNA relaxation reaction. The relaxation activity is restored when both the fragments are mixed in vitro reconstituting the enzyme function. These results along with the DNA interaction pattern of the proteins implicate an essential role for the C-terminal region in single-strand DNA passage between the two transesterification reactions catalyzed by the N-terminal domain.

Experimental and computational investigations of Ser10 and Lys13 in the binding and cleavage of DNA substrates by Escherichia coli DNA topoisomerase I

Ser10 and Lys13 found near the active site tyrosine of Escherichia coli DNA topoisomerase I are conserved among the type IA topoisomerases. Site-directed mutagenesis of these two residues to Ala reduced the relaxation and DNA cleavage activity, with a more severe effect from the Lys13 mutation. Changing Ser10 to Thr or Lys13 to Arg also resulted in loss of DNA cleavage and relaxation activity of the enzyme. In simulations of the open form of the topoisomerase-DNA complex, Lys13 interacts directly with Glu9 (proposed to be important in the catalytic mechanism). This interaction is removed in the K13A mutant, suggesting the importance of lysine as either a proton donor or a stabilizing cation during strand cleavage, while the Lys to Arg mutation significantly distorts catalytic residues. Ser10 forms a direct hydrogen bond with a phosphate group near the active site and is involved in direct binding of the DNA substrate; this interaction is disturbed in the S10A and S10T mutants. This combination of a lysine and a serine residue conserved in the active site of type IA topoisomerases may be required for correct positioning of the scissile phosphate and coordination of catalytic residues relative to each other so that DNA cleavage and subsequent strand passage can take place.

The 5S rRNA maturase, ribonuclease M5, is a Toprim domain family member

The maturation of 5S ribosomal RNA in low G+C Gram-positive bacteria is catalyzed by a highly conserved, ∼190 residue, enzyme, called ribonuclease M5 (RNase M5). Sequence alignment had predicted that the N-terminal half of RNase M5 would consist of a Toprim domain, a protein fold found in type IA and type II topoisomerases, DnaG-like primases, OLD family nucleases and RecR proteins [L. Aravind, D. D. Leipe and E. V. Koonin (1998) Nucleic Acids Res., 26, 4205–4213]. Here, we present structural modelling data and a mutational analysis of RNase M5 that confirms this hypothesis. The N-terminal half of RNase M5 can be fitted to the Toprim domain of the DnaG catalytic core. Mutation of amino acid residues highly conserved among RNase M5 enzymes and members of the Toprim domain family showed that alteration of residues critical for topoisomerase and primase activity also had a dramatic effect on the cleavage of 5S rRNA precursor by RNase M5 both in vivo and in vitro. This suggests that the mechanisms of double-stranded RNA cleavage by RNase M5 and double-stranded DNA cleavage by members of the topoisomerase family are related.

Site-directed mutagenesis of residues involved in G Strand DNA binding by Escherichia coli DNA topoisomerase I

Crystal structures of complexes between type IA DNA topoisomerases and single-stranded DNA suggest that the residues Ser-192, Arg-195, and Gln-197 in a conserved region of Escherichia coli topoisomerase I may be important for direct interactions with phosphates on the G strand of DNA, which is the substrate for DNA cleavage and religation (Changela A., DiGate, R. J., and Mondragón, A. (2001) Nature 411, 1077-1081; Perry, K., and Mondragón, A. (2003) Structure 11, 1349-1358). Site-directed mutagenesis experiments altering these residues to alanines and other amino acids were carried out to probe the relevance of these interactions in the catalytic activities of the enzyme. The results show that the side chains of Arg-195 and Gln-197 are required for DNA cleavage by the enzyme and are likely to be important for positioning of the G strand of DNA at the active site prior to DNA cleavage. Mutation of Ser-192 did not affect DNA binding and cleavage but nevertheless decreased the overall rate of relaxation of supercoiled DNA probably because of its participation in a later step of the reaction pathway.

Flexibility at Gly-194 is required for DNA cleavage and relaxation activity of Escherichia coli DNA topoisomerase I

The proposed mechanism of type IA DNA topoisomerase I includes conformational changes by the single enzyme polypeptide to allow binding of the G strand of the DNA substrate at the active site, and the opening or closing of the "gate" created on the G strand of DNA to the passing single or double DNA strand(s) through the cleaved G strand DNA. The shifting of an alpha helix upon G strand DNA binding has been observed from the comparison of the type IA DNA topoisomerase crystal structures. Site-directed mutagenesis of the strictly conserved Gly-194 at the N terminus of this alpha helix in Escherichia coli DNA topoisomerase I showed that flexibility around this glycine residue is required for DNA cleavage and relaxation activity and supports a functional role for this hinge region in the enzyme conformational change.

DNA manipulators: caught in the act

DNA is a dynamic molecule that undergoes constant changes in the cell through interactions with numerous proteins. Several classes of enzyme are specialized in promoting DNA rearrangements, including site-specific recombinases, DNA helicases, transposases and DNA topoisomerases. Recent structures of protein-DNA reaction intermediates trapped in various states of DNA remodeling, complemented by biochemical and biophysical functional studies, have enhanced our understanding of their respective mechanistic pathways.

Similar structural basis for membrane localization and protein priming by an RNA-dependent RNA polymerase

Protein primers are used to initiate genomic synthesis of several RNA and DNA viruses, although the structural details of the primer-polymerase interactions are not yet known. Poliovirus polymerase binds with high affinity to the membrane-bound viral protein 3AB but uridylylates only the smaller peptide 3B in vitro. Mutational analysis of the polymerase identified four surface residues on the three-dimensional structure of poliovirus polymerase whose wild-type identity is required for 3AB binding. These mutants also decreased 3B uridylylation, arguing that the binding sites for the membrane tether and the protein primer overlap. Mutation of flanking residues between the 3AB binding site and the polymerase active site specifically decreased 3B uridylylation, likely affecting steps subsequent to binding. The physical overlap of sites for protein priming and membrane association should facilitate replication initiation in the membrane-associated complex.

The role of GyrB in the DNA cleavage-religation reaction of DNA gyrase: a proposed two metal-ion mechanism

We have examined the role of the DNA gyrase B protein in cleavage and religation of DNA using site-directed mutagenesis. Three aspartate residues and a glutamate residue: E424, D498, D500 and D502, thought to co-ordinate a magnesium ion, were mutated to alanine; in addition, the glutamate residue and one aspartate residue were mutated to glutamine and asparagine, respectively. We have shown that these residues are important for the cleavage-religation reaction and are likely to be involved in magnesium ion co-ordination. On separate mutation of two of these aspartate residues to cysteine or histidine, the metal ion preference for the DNA relaxation activity of gyrase changed from magnesium to manganese (II). We present evidence to support the idea that cleavage of each DNA strand involves two or more metal ions, and suggest a scheme for the DNA cleavage chemistry of DNA gyrase involving two metal ions.

Biochemical characterization of an invariant histidine involved in Escherichia coli DNA topoisomerase I catalysis

An invariant histidine residue, His-365 in Escherichia coli DNA topoisomerase I, is located at the active site of type IA DNA topoisomerases and near the active site tyrosine. Its ability to participate in the multistep catalytic process of DNA relaxation was investigated. His-365 was mutated to alanine, arginine, asparagine, aspartate, glutamate, and glutamine to study its ability to participate in general acid/base catalysis and bind DNA. The mutants were examined for pH-dependent DNA relaxation and cleavage, salt-dependent DNA relaxation, and salt-dependent DNA binding affinity. The mutants relax DNA in a pH-dependent manner and at low salt concentrations. The pH dependence of all mutants is different from the wild type, suggesting that His-365 is responsible for the pH dependence of the enzyme. Additionally, whereas the wild type enzyme shows pH-dependent oligonucleotide cleavage, cleavage by both H365Q and H365A is pH-independent. H365Q cleaves DNA with rates similar to the wild type enzyme, whereas H365A has a slower rate of DNA cleavage than the wild type but can cleave more substrate overall. H365A also has a lower DNA binding affinity than the wild type enzyme. The binding affinity was determined at different salt concentrations, showing that the alanine mutant displaces half a charge less upon binding DNA than an inactive form of topoisomerase I. These observations indicate that His-365 participates in DNA binding and is responsible for optimal catalysis at physiological pH.

Identification of residues in yeast Spo11p critical for meiotic DNA double-strand break formation

Saccharomyces cerevisiae Spo11 protein (Spo11p) is thought to generate the DNA double-strand breaks (DSBs) that initiate homologous recombination during meiosis. Spo11p is related to a subunit of archaebacterial topoisomerase VI and appears to cleave DNA through a topoisomerase-like transesterase mechanism. In this work, we used the crystal structure of a fragment of topoisomerase VI to model the Spo11p structure and to identify amino acid residues in yeast Spo11p potentially involved in DSB catalysis and/or DNA binding. These residues were mutated to determine which are critical for Spo11p function in vivo. Mutation of Glu-233 or Asp-288, which lie in a conserved structural motif called the Toprim domain, abolished meiotic recombination. These Toprim domain residues have been implicated in binding a metal ion cofactor in topoisomerases and bacterial primases, supporting the idea that DNA cleavage by Spo11p is Mg(2+) dependent. Mutations at an invariant arginine (Arg-131) within a second conserved structural motif known as the 5Y-CAP domain, as well as three other mutations (E235A, F260R, and D290A), caused marked changes in the DSB pattern at a recombination hotspot, suggesting that Spo11p contributes directly to the choice of DNA cleavage site. Finally, certain DSB-defective mutant alleles generated in this study conferred a semidominant negative phenotype but only when Spo11p activity was partially compromised by the presence of an epitope tag. These results are consistent with a multimeric structure for Spo11p in vivo but may also indicate that the amount of Spo11 protein is not a limiting factor for DSB formation in normal cells.

On the molecular basis of the thermal sensitivity of an Escherichia coli topA mutant

Studies of two temperature-sensitive Escherichia coli topA strains AS17 and BR83, both of which were supposed to carry a topA amber mutation and a temperature-sensitive supD43,74 amber-suppressor, led to conflicting results regarding the essentiality of DNA topoisomerase I in cells grown in media of low osmolarity. We have therefore reexamined the molecular basis of the temperature sensitivity of strain AS17. We find that the supD allele in this strain had lost its temperature sensitivity. The temperature sensitivity of the strain, in media of all osmolarity, results from the synthesis of a mutant DNA topoisomerase I that is itself temperature-sensitive. Nucleotide sequencing of the AS17 topA allele and studies of its expected cellular product show that the mutant enzyme is not as active as its wild-type parent even at 30 degrees C, a permissive temperature for the strain, and its activity relative to the wild-type enzyme is further reduced at 42 degrees C, a nonpermissive temperature. Our results thus implicate an indispensable role of DNA topoisomerase I in E. coli cells grown in media of any osmolarity.

Hyperthermophilic topoisomerase I from Thermotoga maritima. A very efficient enzyme that functions independently of zinc binding

Topoisomerases, by controlling DNA supercoiling state, are key enzymes for adaptation to high temperatures in thermophilic organisms. We focus here on the topoisomerase I from the hyperthermophilic bacterium Thermotoga maritima (optimal growth temperature, 80 degrees C). To determine the properties of the enzyme compared with those of its mesophilic homologs, we overexpressed T. maritima topoisomerase I in Escherichia coli and purified it to near homogeneity. We show that T. maritima topoisomerase I exhibits a very high DNA relaxing activity. Mapping of the cleavage sites on a variety of single-stranded oligonucleotides indicates a strong preference for a cytosine at position -4 of the cleavage, a property shared by E. coli topoisomerase I and archaeal reverse gyrases. As expected, the mutation of the putative active site Tyr 288 to Phe led to a totally inactive protein. To investigate the role of the unique zinc motif (Cys-X-Cys-X(16)-Cys-X-Cys) present in T. maritima topoisomerase I, experiments have been performed with the protein mutated on the tetracysteine motif. Strikingly, the results show that zinc binding is not required for DNA relaxation activity, contrary to the E. coli enzyme. Furthermore, neither thermostability nor cleavage specificity is altered in this mutant. This finding opens the question of the role of the zinc-binding motif in T. maritima topoisomerase I and suggests that this hyperthermophilic topoisomerase possesses a different mechanism from its mesophilic homolog.

Effect of phosphorothioate substitutions on DNA cleavage by Escherichia coli DNA topoisomerase I

To evaluate the structural influence of the DNA phosphate backbone on the activity of Escherichia coli DNA topoisomerase I, modified forms of oligonucleotide dA(7) were synthesized with a chiral phosphorothioate replacing the non-bridging oxygens at each position along the backbone. A deoxy-iodo-uracil replaced the 5'-base to crosslink the oligonucleotides by ultraviolet (UV) and assess binding affinity. At the scissile phosphate there was little effect on the cleavage rate. At the +1 phosphate, the rectus phosphorus (Rp)-thio-substitution reduced the rate of cleavage by a factor of 10. At the +3 and -2 positions from the scissile bond, the Rp-isomer was cleaved at a faster rate than the sinister phosphorus (Sp)-isomer. The results demonstrate the importance of backbone contacts between DNA substrate and E. coli topoisomerase I.

Crystal structure of a complex of a type IA DNA topoisomerase with a single-stranded DNA molecule

A variety of cellular processes, including DNA replication, transcription, and chromosome condensation, require enzymes that can regulate the ensuing topological changes occurring in DNA. Such enzymes-DNA topoisomerases-alter DNA topology by catalysing the cleavage of single-stranded DNA (ssDNA) or double-stranded DNA (dsDNA), the passage of DNA through the resulting break, and the rejoining of the broken phosphodiester backbone. DNA topoisomerase III from Escherichia coli belongs to the type IA family of DNA topoisomerases, which transiently cleave ssDNA via formation of a covalent 5' phosphotyrosine intermediate. Here we report the crystal structure, at 2.05 A resolution, of an inactive mutant of E. coli DNA topoisomerase III in a non-covalent complex with an 8-base ssDNA molecule. The enzyme undergoes a conformational change that allows the oligonucleotide to bind within a groove leading to the active site. We note that the ssDNA molecule adopts a conformation like that of B-DNA while bound to the enzyme. The position of the DNA within the realigned active site provides insight into the role of several highly conserved residues during catalysis. These findings confirm various aspects of the type IA topoisomerase mechanism while suggesting functional implications for other topoisomerases and proteins that perform DNA rearrangements.

The two active-site tyrosine residues of the a protein play non-equivalent roles during initiation of rolling circle replication of bacteriophage p2

The A protein of bacteriophage P2 initiates rolling circle DNA replication by a single-stranded cut at the origin. Two well-conserved tyrosine residues, interspaced by three amino acid residues, are required for the cleavage-joining activity of the protein. The functional relationship between these tyrosine residues was investigated by site-directed mutagenesis. We found that the two tyrosine residues located in the presumed catalytic site of P2 A play non-equivalent functional roles. Tyrosine residue 454 is superior in nicking single-stranded DNA compared to tyrosine residue 450, while both could promote joining at equal efficiency. Specific peptide-oligonucleotide adducts after cleavage reaction and protease digestion could be observed for both tyrosine residues. We propose that tyrosine 454 initiates replication and that tyrosine 450 is able to cleave the DNA only when tyrosine 454 is covalently joined to DNA, thereby reinitiating replication. Also, the involvement of divalent cations in the catalytic activity of P2 A was investigated. While the cleavage reaction was strongly discriminating between different divalent cations, primarily prefering magnesium, the joining reaction showed the same efficiency independently of what divalent cation was provided. This phenomenon could reflect conformational changes of the protein upon binding to DNA. Finally, we found that a large part of the C terminus but not the N terminus is dispensable for initiation of replication both in vivo and in vitro.

A TOPRIM domain in the crystal structure of the catalytic core of Escherichia coli primase confirms a structural link to DNA topoisomerases

Primases synthesize short RNA strands on single-stranded DNA templates, thereby generating the hybrid duplexes required for the initiation of synthesis by DNA polymerases. We present the crystal structure of the catalytic unit of a primase enzyme, that of a approximately 320 residue fragment of Escherichia coli primase, determined at 2.9 A resolution. Central to the catalytic unit is a TOPRIM domain that is strikingly similar in its structure to that of corresponding domains in DNA topoisomerases, but is unrelated to the catalytic centers of other DNA or RNA polymerases. The catalytic domain of primase is crescent-shaped, and the concave face of the crescent is predicted to accommodate about 10 base-pairs of RNA-DNA duplex in a loose interaction, thereby limiting processivity.

The acidic triad conserved in type IA DNA topoisomerases is required for binding of Mg(II) and subsequent conformational change

The acidic residues Asp-111, Asp-113, and Glu-115 of Escherichia coli DNA topoisomerase I are located near the active site Tyr-319 and are conserved in type IA topoisomerase sequences with counterparts in type IIA DNA topoisomerases. Their exact functional roles in catalysis have not been clearly defined. Mutant enzymes with two or more of these residues converted to alanines were found to have >90% loss of activity in the relaxation assay with 6 mM Mg(II) present. Mg(II) concentrations (15-20 mM) inhibitory for the wild type enzyme are needed by these double mutants for maximal relaxation activity. The triple mutant D111A/D113A/E115A had no detectable relaxation activity. Mg(II) binding to wild type enzyme resulted in an altered conformation detectable by Glu-C proteolytic digestion. This conformational change was not observed for the triple mutant or for the double mutant D111A/D113A. Direct measurement of Mg(II) bound showed the loss of 1-2 Mg(II) ions for each enzyme molecule due to the mutations. These results demonstrate a functional role for these acidic residues in the binding of Mg(II) to induce the conformational change required for the relaxation of supercoiled DNA by the enzyme.

The structure of Escherichia coli DNA topoisomerase III

BACKGROUND

DNA topoisomerases are enzymes that change the topology of DNA. Type IA topoisomerases transiently cleave one DNA strand in order to pass another strand or strands through the break. In this manner, they can relax negatively supercoiled DNA and catenate and decatenate DNA molecules. Structural information on Escherichia coli DNA topoisomerase III is important for understanding the mechanism of this type of enzyme and for studying the mechanistic differences among different members of the same subfamily.

RESULTS

The structure of the intact and fully active E. coli DNA topoisomerase III has been solved to 3.0 A resolution. The structure shows the characteristic fold of the type IA topoisomerases that is formed by four domains, creating a toroidal protein. There is remarkable structural similarity to the 67 kDa N-terminal fragment of E. coli DNA topoisomerase I, although the relative arrangement of the four domains is significantly different. A major difference is the presence of a 17 amino acid insertion in topoisomerase III that protrudes from the side of the central hole and could be involved in the catenation and decatenation reactions. The active site is formed by highly conserved amino acids, but the structural information and existing biochemical and mutagenesis data are still insufficient to assign specific roles to most of them. The presence of a groove in one side of the protein is suggestive of a single-stranded DNA (ssDNA)-binding region.

CONCLUSIONS

The structure of E. coli DNA topoisomerase III resembles the structure of E. coli DNA topoisomerase I except for the presence of a positively charged loop that may be involved in catenation and decatenation. A groove on the side of the protein leads to the active site and is likely to be involved in DNA binding. The structure helps to establish the overall mechanism for the type IA subfamily of topoisomerases with greater confidence and expands the structural basis for understanding these proteins.

Similarity in the catalysis of DNA breakage and rejoining by type IA and IIA DNA topoisomerases

Studies of yeast DNA topoisomerase II with various alanine-substitution mutations provide strong biochemical support of a recent hypothesis that the type IA and IIA DNA topoisomerases act similarly in their cleavage and rejoining of DNA. DNA breakage and rejoining by either a type IA or a type IIA enzyme are shown to involve cooperation between a DNA-binding domain containing the active-site tyrosine and a Rossmann fold containing several highly conserved acidic residues. For a homodimeric type IIA enzyme, cooperation occurs in trans: the active-site tyrosine in the DNA-binding domain of one protomer cooperates with several residues in the Rossmann fold as well as other regions of the other protomer.

Bacterial and archeal type I topoisomerases

Bacterial and archeal type I topoisomerases, including topoisomerase I, topoisomerase III and reverse gyrase, have different potential roles in the control of DNA topology including regulation of supercoiling and maintenance of genetic stability. Analysis of their coding sequences in different organisms shows that they belong to the type IA family of DNA topoisomerases, but there is variability in organization of various enzymatic domains necessary for topoisomerase activity. The torus-like structure of the conserved transesterification domain with the active site tyrosine for DNA cleavage/rejoining suggests steps of enzyme conformational change driven by DNA substrate and Mg(II) cofactor binding, that are required for catalysis of change in DNA linking number.

Toprim--a conserved catalytic domain in type IA and II topoisomerases, DnaG-type primases, OLD family nucleases and RecR proteins

Iterative profile searches and structural modeling show that bacterial DnaG-type primases, small primase-like proteins from bacteria and archaea, type IA and type II topoisomerases, bacterial and archaeal nucleases of the OLD family and bacterial DNA repair proteins of the RecR/M family contain a common domain, designated Toprim (topoisomerase-primase) domain. The domain consists of approximately 100 amino acids and has two conserved motifs, one of which centers at a conserved glutamate and the other one at two conserved aspartates (DxD). Examination of the structure of Topo IA and Topo II and modeling of the Toprim domains of the primases reveal a compact beta/alpha fold, with the conserved negatively charged residues juxtaposed, and inserts seen in Topo IA and Topo II. The conserved glutamate may act as a general base in nucleotide polymerization by primases and in strand rejoining by topoisomerases and as a general acid in strand cleavage by topoisomerases and nucleases. The role of this glutamate in catalysis is supported by site-directed mutagenesis data on primases and Topo IA. The DxD motif may coordinate Mg2+that is required for the activity of all Toprim-containing enzymes. The common ancestor of all life forms could encode a prototype Toprim enzyme that might have had both nucleotidyl transferase and polynucleotide cleaving activity.