Requirements for and regulation of origin opening of plasmid P1

Rep protein accommodates together dsDNA and ssDNA which enables a loop-back mechanism to plasmid DNA replication initiation

For DNA replication initiation in Bacteria, replication initiation proteins bind to double-stranded DNA (dsDNA) and interact with single-stranded DNA (ssDNA) at the replication origin. The structural-functional relationship of the nucleoprotein complex involving initiator proteins is still elusive and different models are proposed. In this work, based on crosslinking combined with mass spectrometry (MS), the analysis of mutant proteins and crystal structures, we defined amino acid residues essential for the interaction between plasmid Rep proteins, TrfA and RepE, and ssDNA. This interaction and Rep binding to dsDNA could not be provided in trans, and both are important for dsDNA melting at DNA unwinding element (DUE). We solved two crystal structures of RepE: one in a complex with ssDNA DUE, and another with both ssDNA DUE and dsDNA containing RepE-specific binding sites (iterons). The amino acid residues involved in interaction with ssDNA are located in the WH1 domain in stand β1, helices α1 and α2 and in the WH2 domain in loops preceding strands β1' and β2' and in these strands. It is on the opposite side compared to RepE dsDNA-recognition interface. Our data provide evidence for a loop-back mechanism through which the plasmid replication initiator molecule accommodates together dsDNA and ssDNA.

Conjugative plasmid-encoded toxin-antitoxin system PrpT/PrpA directly controls plasmid copy number

Since conjugative plasmids are usually large and may carry genes encoding functions that are detrimental to the bacterial host, minimizing plasmid copy number is critical for reducing the host burden. Toxin–antitoxin (TA) systems are one of the conserved modules on conjugative plasmids. Here, we demonstrate the functional significance of a large group of antitoxins on conjugative plasmids: the antitoxin acts as an unexpected player in the negative control of plasmid replication. For the plasmid-encoded PrpT/PrpA TA system, the antitoxin can control toxin production by binding to PrpT and by reducing plasmid copy number. This work shows that the antitoxin can directly regulate plasmid replication, expanding our understanding of the physiological role of TA systems.

Toxin–antitoxin (TA) loci were initially identified on conjugative plasmids, and one function of plasmid-encoded TA systems is to stabilize plasmids or increase plasmid competition via postsegregational killing. Here, we discovered that the type II TA system, Pseudoalteromonas rubra plasmid toxin–antitoxin PrpT/PrpA, on a low-copy-number conjugative plasmid, directly controls plasmid replication. Toxin PrpT resembles ParE of plasmid RK2 while antitoxin PrpA (PF03693) shares no similarity with previously characterized antitoxins. Surprisingly, deleting this prpA-prpT operon from the plasmid does not result in plasmid segregational loss, but greatly increases plasmid copy number. Mechanistically, the antitoxin PrpA functions as a negative regulator of plasmid replication, by binding to the iterons in the plasmid origin that inhibits the binding of the replication initiator to the iterons. We also demonstrated that PrpA is produced at a higher level than PrpT to prevent the plasmid from overreplicating, while partial or complete degradation of labile PrpA derepresses plasmid replication. Importantly, the PrpT/PrpA TA system is conserved and is widespread on many conjugative plasmids. Altogether, we discovered a function of a plasmid-encoded TA system that provides new insights into the physiological significance of TA systems.

Interactions of replication initiator RctB with single- and double-stranded DNA in origin opening of Vibrio cholerae chromosome 2

Studies of bacterial chromosomes and plasmids indicate that their replication initiator proteins bind to origins of replication at many double-stranded sites and also at AT-rich regions where single-stranded DNA is exposed during origin opening. Single-strand binding apparently promotes origin opening by stabilizing an open structure, but how the initiator participates in this process and the contributions of the several binding sites remain unclear. Here, we show that the initiator protein of Vibrio cholerae specific to chromosome 2 (Chr2) also has single-strand binding activity in the AT-rich region of its origin. Binding is strand specific, depends on repeats of the sequence 5'ATCA and is greatly stabilized in vitro by specific double-stranded sites of the origin. The stability derives from the formation of ternary complexes of the initiator with the single- and double-stranded sites. An IHF site lies between these two kinds of sites in the Chr2 origin and an IHF-induced looping out of the intervening DNA mediates their interaction. Simultaneous binding to two kinds of sites in the origin appears to be a common mechanism by which bacterial replication initiators stabilize an open origin.

DciA is an ancestral replicative helicase operator essential for bacterial replication initiation

Delivery of the replicative helicase onto DNA is an essential step in the initiation of replication. In bacteria, DnaC (in Escherichia coli) and DnaI (in Bacillus subtilis) are representative of the two known mechanisms that assist the replicative helicase at this stage. Here, we establish that these two strategies cannot be regarded as prototypical of the bacterial domain since dnaC and dnaI (dna[CI]) are present in only a few bacterial phyla. We show that dna[CI] was domesticated at least seven times through evolution in bacteria and at the expense of one gene, which we rename dciA (dna[CI] antecedent), suggesting that DciA and Dna[CI] share a common function. We validate this hypothesis by establishing in Pseudomonas aeruginosa that DciA possesses the attributes of the replicative helicase-operating proteins associated with replication initiation.

DNA replication requires the loading of the replicative helicase onto the DNA molecule; in bacteria this was believed to be solely accomplished by DnaC and DnaI. Here the authors identify DciA as an ancestral and still widely distributed replicative helicase loader.

Opening the Strands of Replication Origins-Still an Open Question

The local separation of duplex DNA strands (strand opening) is necessary for initiating basic transactions on DNA such as transcription, replication, and homologous recombination. Strand opening is commonly a stage at which these processes are regulated. Many different mechanisms are used to open the DNA duplex, the details of which are of great current interest. In this review, we focus on a few well-studied cases of DNA replication origin opening in bacteria. In particular, we discuss the opening of origins that support the theta (θ) mode of replication, which is used by all chromosomal origins and many extra-chromosomal elements such as plasmids and phages. Although the details of opening can vary among different origins, a common theme is binding of the initiator to multiple sites at the origin, causing stress that opens an adjacent and intrinsically unstable A+T rich region. The initiator stabilizes the opening by capturing one of the open strands. How the initiator binding energy is harnessed for strand opening remains to be understood.

Replisome Assembly at Bacterial Chromosomes and Iteron Plasmids

The proper initiation and occurrence of DNA synthesis depends on the formation and rearrangements of nucleoprotein complexes within the origin of DNA replication. In this review article, we present the current knowledge on the molecular mechanism of replication complex assembly at the origin of bacterial chromosome and plasmid replicon containing direct repeats (iterons) within the origin sequence. We describe recent findings on chromosomal and plasmid replication initiators, DnaA and Rep proteins, respectively, and their sequence-specific interactions with double- and single-stranded DNA. Also, we discuss the current understanding of the activities of DnaA and Rep proteins required for replisome assembly that is fundamental to the duplication and stability of genetic information in bacterial cells.

Proteolysis in plasmid DNA stable maintenance in bacterial cells

Plasmids, as extrachromosomal genetic elements, need to work out strategies that promote independent replication and stable maintenance in host bacterial cells. Their maintenance depends on constant formation and dissociation of nucleoprotein complexes formed on plasmid DNA. Plasmid replication initiation proteins (Rep) form specific complexes on direct repeats (iterons) localized within the plasmid replication origin. Formation of these complexes along with a strict control of Rep protein cellular concentration, quaternary structure, and activity, is essential for plasmid maintenance. Another important mechanism for maintenance of low-copy-number plasmids are the toxin-antitoxin (TA) post-segregational killing (psk) systems, which prevent plasmid loss from the bacterial cell population. In this mini review we discuss the importance of nucleoprotein complex processing by energy-dependent host proteases in plasmid DNA replication and plasmid type II toxin-antitoxin psk systems, and draw attention to the elusive role of DNA in this process.

Iteron Plasmids

Iteron-containing plasmids are model systems for studying the metabolism of extrachromosomal genetic elements in bacterial cells. Here we describe the current knowledge and understanding of the structure of iteron-containing replicons, the structure of the iteron plasmid encoded replication initiation proteins, and the molecular mechanisms for iteron plasmid DNA replication initiation. We also discuss the current understanding of control mechanisms affecting the plasmid copy number and how host chaperone proteins and proteases can affect plasmid maintenance in bacterial cells.

AT-rich region and repeated sequences - the essential elements of replication origins of bacterial replicons

Repeated sequences are commonly present in the sites for DNA replication initiation in bacterial, archaeal, and eukaryotic replicons. Those motifs are usually the binding places for replication initiation proteins or replication regulatory factors. In prokaryotic replication origins, the most abundant repeated sequences are DnaA boxes which are the binding sites for chromosomal replication initiation protein DnaA, iterons which bind plasmid or phage DNA replication initiators, defined motifs for site-specific DNA methylation, and 13-nucleotide-long motifs of a not too well-characterized function, which are present within a specific region of replication origin containing higher than average content of adenine and thymine residues. In this review, we specify methods allowing identification of a replication origin, basing on the localization of an AT-rich region and the arrangement of the origin's structural elements. We describe the regularity of the position and structure of the AT-rich regions in bacterial chromosomes and plasmids. The importance of 13-nucleotide-long repeats present at the AT-rich region, as well as other motifs overlapping them, was pointed out to be essential for DNA replication initiation including origin opening, helicase loading and replication complex assembly. We also summarize the role of AT-rich region repeated sequences for DNA replication regulation.

DnaC inactivation in Escherichia coli K-12 induces the SOS response and expression of nucleotide biosynthesis genes

BACKGROUND

Initiation of chromosome replication in E. coli requires the DnaA and DnaC proteins and conditionally-lethal dnaA and dnaC mutants are often used to synchronize cell populations.

METHODOLOGY/PRINCIPAL FINDINGS

DNA microarrays were used to measure mRNA steady-state levels in initiation-deficient dnaA46 and dnaC2 bacteria at permissive and non-permissive temperatures and their expression profiles were compared to MG1655 wildtype cells. For both mutants there was altered expression of genes involved in nucleotide biosynthesis at the non-permissive temperature. Transcription of the dnaA and dnaC genes was increased at the non-permissive temperature in the respective mutant strains indicating auto-regulation of both genes. Induction of the SOS regulon was observed in dnaC2 cells at 38 degrees C and 42 degrees C. Flow cytometric analysis revealed that dnaC2 mutant cells at non-permissive temperature had completed the early stages of chromosome replication initiation.

CONCLUSION/SIGNIFICANCE

We suggest that in dnaC2 cells the SOS response is triggered by persistent open-complex formation at oriC and/or by arrested forks that require DnaC for replication restart.

IHF-dependent activation of P1 plasmid origin by dnaA

In bacteria, many DNA-protein interactions that initiate transcription, replication and recombination require the mediation of DNA architectural proteins such as IHF and HU. For replication initiation, plasmid P1 requires three origin binding proteins: the architectural protein HU, a plasmid-specific initiator, RepA, and the Escherichia coli chromosomal initiator, DnaA. The two initiators bind in the origin of replication to multiple sites, called iterons and DnaA boxes respectively. We show here that all five known DnaA boxes can be deleted from the plasmid origin provided the origin is extended by about 120 bp. The additional DNA provides an IHF site and most likely a weak DnaA binding site, because replacing the putative site with an authentic DnaA box enhanced plasmid replication in an IHF-dependent manner. IHF most likely brings about interactions between distally bound DnaA and RepA by bending the intervening DNA. The role of IHF in activating P1 origin by allowing DnaA binding to a weak site is reminiscent of the role the protein plays in initiating the host chromosomal replication.

Transcriptional inactivation of a regulatory site for replication of Vibrio cholerae chromosome II

The bacterium Vibrio cholerae has two chromosomes. The origin of replication of chromosome I is similar to that of Escherichia coli. The origin-containing region of chromosome II (oriCII) resembles replicons of plasmids such as P1, except for the presence of an additional gene, rctA [Egan, E. S. & Waldor, M. K. (2003) Cell 114, 521-530]. The oriCII region that includes the initiator gene, rctB, can function as a plasmid in E. coli. Here we show that RctB suffices for the oriCII-based plasmid replication, and rctA in cis or trans reduces the plasmid copy number, thereby serving as a negative regulator. The inhibitory activity could be overcome by increasing the concentration of RctB, suggesting that rctA titrates the initiator. Purified RctB bound to a DNA fragment carrying rctA, confirming that the two can interact. Although rctA apparently works as a titrating site, it is nonetheless transcribed. We find that the transcription attenuates the inhibitory activity of the gene, presumably by interfering with RctB binding. RctB, in turn, repressed the rctA promoter and, thereby, could control its own titration by modulating the transcription of rctA. This control circuit appears to be a putative novel mechanism for homeostasis of initiator availability.

Interaction of initiator proteins with the origin of replication of an IncL/M plasmid

The origin of replication of the IncL/M plasmid pMU604 was analyzed to identify sequences important for binding of initiator proteins and origin activity. A thrice repeated sequence motif 5'-NANCYGCAA-3' was identified as the binding site (RepA box) of the initiator protein, RepA. All three copies of the RepA box were required for in vivo activity and binding of RepA to these boxes appeared to be cooperative. A DnaA R box (box 1), located immediately upstream of the RepA boxes, was not required for recruitment of DnaA during initiation of replication by RepA of pMU604 unless a DnaA R box located at the distal end of the origin (box 3) had been inactivated. However, DnaA R box 1 was important for recruitment of DnaA to the origin of replication of pMU604 when the initiator RepA was that from a distantly related plasmid, pMU720. A mutation which scrambled DnaA R boxes 1 and 3 and one which scrambled DnaA R boxes 1, 3 and 4 had much more deleterious effects on initiation by RepA of pMU720 than on initiation by RepA of pMU604. Neither Rep protein could initiate replication from the origin of pMU604 in the absence of DnaA, suggesting that the difference between them might lie in the mechanism of recruitment of DnaA to this origin. DnaA protein enhanced the binding and origin unwinding activities of RepA of pMU604, but appeared unable to bind to a linear DNA fragment bearing the origin of replication of pMU604 in the absence of other proteins.

Oligomeric initiator protein-mediated DNA looping negatively regulates plasmid replication in vitro by preventing origin melting

Although DNA looping between the initiator binding sites (iterons) of the replication origin (ori) of a plasmid and the iterons located in a cis-acting control sequence called inc has been postulated to promote negative control of plasmid DNA replication, not only was definitive evidence for such looping lacking, but also the detailed molecular mechanism of this control had not been elucidated. Here, we present direct evidence showing that both the monomeric and the dimeric forms of the RepE initiator protein of F factor together promote pairing of incC-oriF sites by DNA looping. By using a reconstituted replication system consisting of 26 purified proteins, we show further that the DNA loop formation negatively regulates plasmid replication by inhibiting the formation of an open complex at the replication origin, thus elucidating a key step of replication control.

Positioning and the specific sequence of each 13-mer motif are critical for activity of the plasmid RK2 replication origin

The minimal replication origin of the broad-host-range plasmid RK2, oriV, contains five iterons which are binding sites for the plasmid-encoded replication initiation protein TrfA, four DnaA boxes, which bind the host DnaA protein, and an AT-rich region containing four 13-mer sequences. In this study, 26 mutants with altered sequence and/or spacing of 13-mer motifs have been constructed and analysed for replication activity in vivo and in vitro. The data show that the replacement of oriV 13-mers by similar but not identical 13-mer sequences from Escherichia coli oriC inactivates the origin. In addition, interchanging the positions of the oriV 13-mers results in greatly reduced activity. Mutants with T/A substitutions are also inactive. Furthermore, introduction of single-nucleotide substitutions demonstrates very restricted sequence requirements depending on the 13-mer position. Only two of the mutants are host specific, functional in Pseudomonas aeruginosa but not in E. coli. Our experiments demonstrate considerable complexity in the plasmid AT-rich region architecture required for functionality. It is evident that low internal stability of this region is not the only feature contributing to origin activity. Our studies suggest a requirement for sequence-specific protein interactions within the 13-mers during assembly of replication complexes at the plasmid origin.

Identification and characterization of a novel allele of Escherichia coli dnaB helicase that compromises the stability of plasmid P1

Bacteriophage P1 lysogenizes Escherichia coli cells as a plasmid with approximately the same copy number as the copy number of the host chromosome. Faithful inheritance of the plasmids relies upon proper DNA replication, as well as a partition system that actively segregates plasmids to new daughter cells. We genetically screened for E. coli chromosomal mutations that influenced P1 stability and identified a novel temperature-sensitive allele of the dnaB helicase gene (dnaB277) that replaces serine 277 with a leucine residue (DnaB S277L). This allele conferred a severe temperature-sensitive phenotype to the host; dnaB277 cells were not viable at temperatures above 34 degrees C. Shifting dnaB277 cells to 42 degrees C resulted in an immediate reduction in the rate of DNA synthesis and extensive cell filamentation. The dnaB277 allele destabilized P1 plasmids but had no significant influence on the stability of the F low-copy-number plasmid. This observation suggests that there is a specific requirement for DnaB in P1 plasmid maintenance in addition to the general requirement for DnaB as the replicative helicase during elongation.

Multiple homeostatic mechanisms in the control of P1 plasmid replication

Many organisms control initiation of DNA replication by limiting supply or activity of initiator proteins. In plasmids, such as P1, initiators are limited primarily by transcription and dimerization. However, the relevance of initiator limitation to plasmid copy number control has appeared doubtful, because initiator oversupply increases the copy number only marginally. Copy number control instead has been attributed to initiator-mediated plasmid pairing ("handcuffing"), because initiator mutations to handcuffing deficiency elevates the copy number significantly. Here, we present genetic evidence of a role for initiator limitation in plasmid copy number control by showing that autorepression-defective initiator mutants also can elevate the plasmid copy number. We further show, by quantitative modeling, that initiator dimerization is a homeostatic mechanism that dampens active monomer increase when the protein is oversupplied. This finding implies that oversupplied initiator proteins are largely dimeric, partly accounting for their limited ability to increase copy number. A combination of autorepression, dimerization, and handcuffing appears to account fully for control of P1 plasmid copy number.

Nucleotide sequence and evolution of the five-plasmid complement of the phytopathogen Pseudomonas syringae pv. maculicola ES4326

Plasmids are transmissible, extrachromosomal genetic elements that are often responsible for environmental or host-specific adaptations. In order to identify the forces driving the evolution of these important molecules, we determined the complete nucleotide sequence of the five-plasmid complement of the radish and Arabidopsis pathogen Pseudomonas syringae pv. maculicola ES4326 and conducted an intraspecific comparative genomic analysis. To date, this is the most complex fully sequenced plasmid complement of any gram-negative bacterium. The plasmid complement comprises two pPT23A-like replicons, pPMA4326A (46,697 bp) and pPMA4326B (40,110 bp); a pPS10-like replicon, pPMA4326C (8,244 bp); and two atypical, replicase-deficient replicons, pPMA4326D (4,833 bp) and pPMA4326E (4,217 bp). A complete type IV secretion system is found on pPMA4326A, while the type III secreted effector hopPmaA is present on pPMA4326B. The region around hopPmaA includes a shorter hopPmaA homolog, insertion sequence (IS) elements, and a three-element cassette composed of a resolvase, an integrase, and an exeA gene that is also present in several human pathogens. We have also identified a novel genetic element (E622) that is present on all but the smallest plasmid (pPMA4326E) that has features of an IS element but lacks an identifiable transposase. This element is associated with virulence-related genes found in a wide range of P. syringae strains. Comparative genomic analyses of these and other P. syringae plasmids suggest a role for recombination and integrative elements in driving plasmid evolution.

Role of RepA and DnaA proteins in the opening of the origin of DNA replication of an IncB plasmid

The replication initiator protein RepA of the IncB plasmid pMU720 was shown to induce localized unwinding of its cognate origin of replication in vitro. DnaA, the initiator protein of Escherichia coli, was unable to induce localized unwinding of this origin of replication on its own but enhanced the opening generated by RepA. The opened region lies immediately downstream of the last of the three binding sites for RepA (RepA boxes) and covers one turn of DNA helix. A 6-mer sequence, 5'-TCTTAA-3', which lies within the opened region, was essential for the localized unwinding of the origin in vitro and origin activity in vivo. In addition, efficient unwinding of the origin of replication of pMU720 in vitro required the native positioning of the binding sites for the initiator proteins. Interestingly, binding of RepA to RepA box 1, which is essential for origin activity, was not required for the localized opening of the origin in vitro.

pi protein- and ATP-dependent transitions from 'closed' to 'open' complexes at the gamma ori of plasmid R6K

R6K-encoded pi protein can bind to the seven, 22 bp tandem iterons of the gamma origin. In this work, we use a variant of pi, His-pi.F107S, that is hyperactive in replication. In vitro, His-pi.F107S-dependent local DNA melting (open complex formation) occurs in the absence of host proteins (IHF/HU or DnaA) and it is positioned in the A + T-rich region adjacent to iterons. Experiments described here examine the effects of ATP, Mg2+ and temperature on the opening reaction. We show that the opening of the gamma origin can occur in the presence of ATP as well as AMP-PCP (a non-hydrolyzable ATP analog). This suggests that, for gamma origin, ATP hydrolysis may be unnecessary for open complex formation facilitated by His-pi.F107S. In the absence of ATP or Mg2+, His-pi.F107S yielded data suggestive of distortions in the iteron attributable to DNA bending rather than DNA melting. Our findings also demonstrate that ATP and pi stimulate open complex formation over a wide range of temperatures, but not at 0 degrees C. These and other results indicate that ATP and/or Mg2+ are not needed for His-pi.F107S binding to iterons and that ATP effects an allosteric change in the protein bound to gamma origin.

A multifunctional plasmid-encoded replication initiation protein both recruits and positions an active helicase at the replication origin

The DnaA replication initiation protein has been shown to be essential for DNA strand opening at the AT-rich region of the replication origin of the Escherichia coli chromosome as well as serving to recruit and position the DnaB replicative helicase at this open region. Homologues of the dnaA gene of E. coli have been found in most bacterial species, and the DnaA protein has been shown to be required for the initiation of replication of both chromosomal and plasmid DNA. For several plasmid elements it has been found that a plasmid-encoded initiation protein is required along with the DnaA protein to bring about opening of the AT-rich region at the replication origin. The broad host range plasmid RK2 encodes two forms of its replication initiation protein (TrfA-33 and TrfA-44) that differ by an additional 98 aa at the N terminus of the larger (TrfA-44) form. Both forms initiate replication of RK2 in E. coli in vitro by a DnaA-dependent mechanism. However, as shown in this study, TrfA-44 specifically interacts with the DnaB replicative helicase of Pseudomonas putida and Pseudomonas aeruginosa and initiates the formation of a prepriming open complex in the absence of DnaA protein. Thus, the TrfA-44 initiation protein has the multifunctional properties of recruiting and positioning an active form of the DnaB helicase at the RK2 replication origin by a DnaA-independent process. This unique property for a replication initiation protein undoubtedly plays an important role in extending the host range of the RK2 antibiotic resistance plasmid.

Structural changes in RepA, a plasmid replication initiator, upon binding to origin DNA

RepA protein is the DNA replication initiator of the Pseudomonas plasmid pPS10. RepA dimers bind to an inversely repeated operator sequence in repA promoter, thus repressing its own synthesis, whereas monomers bind to four directly repeated sequences (iterons) to initiate DNA replication. We had proposed previously that RepA is composed of two winged-helix (WH) domains, a structural unit also present in eukaryotic and archaeal initiators. To bind to the whole iteron sequence through both domains, RepA should couple monomerization to a conformational change in the N-terminal WH, which includes a leucine zipper-like sequence motif. We show for the first time that, by itself, binding to iteron DNA in vitro dissociates RepA dimers into monomers and alters RepA conformation, suggesting an allosteric effect. Furthermore, we also show that similar changes in RepA are promoted by mutations that substitute two Leu residues of the putative leucine zipper by Ala, destabilizing the hydrophobic core of the first WH. We propose that this mutant (RepA-2L2A) resembles a transient folding intermediate in the pathway leading to active monomers. These findings, together with the known activation of other Rep-type proteins by chaperones, are relevant to understand the molecular basis of plasmid DNA replication initiation.

Common domains in the initiators of DNA replication in Bacteria, Archaea and Eukarya: combined structural, functional and phylogenetic perspectives

Although DNA replication is the universal process for the transmission of genetic information in all living organisms, until very recently evidence was lacking for a related structure and function in the proteins (initiators) that trigger replication in the three 'Life Domains' (Bacteria, Archaea and Eukarya). In this article new data concerning the presence of common features in the initiators of chromosomal replication in bacteria, archaea and eukaryotes are reviewed. Initiators are discussed in the light of: (i) The structure and function of their conserved ATPases Associated with various cellular Activities (AAA+) and winged-helix domains. (ii) The nature of the macromolecular assemblies that they constitute at the replication origins. (iii) Their possible phylogenetic relationship, attempting to sketch the essentials of a hypothetical DNA replication initiator in the micro-organism proposed to be the ancestor of all living cells.

Strategies for helicase recruitment and loading in bacteria

DNA replication initiation in prokaryotes and eukaryotes requires the recruitment and loading of a helicase at the replication origin. To subsequently unwind the double-stranded DNA, the helicase must be properly positioned on the separated DNA strands. Several studies have revealed similarities and differences in the mechanisms used by different autonomously replicating DNA elements (replicons) for recruitment and activation of the appropriate helicase. Of particular interest are plasmid replicons that are adapted for replication in diverse bacterial hosts and are therefore intriguingly able to exploit the helicases of distantly related bacterial species. The different molecular mechanisms by which replicons recruit and load helicases are only just beginning to be understood.

The bacterial replication initiator DnaA. DnaA and oriC, the bacterial mode to initiate DNA replication

The initiation of replication is the central event in the bacterial cell cycle. Cells control the rate of DNA synthesis by modulating the frequency with which new chains are initiated, like all macromolecular synthesis. The end of the replication cycle provides a checkpoint that must be executed for cell division to occur. This review summarizes recent insight into the biochemistry, genetics and control of the initiation of replication in bacteria, and the central role of the initiator protein DnaA.

Origin pairing ('handcuffing') as a mode of negative control of P1 plasmid copy number

In one family of bacterial plasmids, multiple initiator binding sites, called iterons, are used for initiation of plasmid replication as well as for the control of plasmid copy number. Iterons can also pair in vitro via the bound initiators. This pairing, called handcuffing, has been suggested to cause steric hindrance to initiation and thereby control the copy number. To test this hypothesis, we have compared copy numbers of isogenic miniP1 plasmid monomer and dimer. The dimer copy number was only one-quarter that of the monomer, suggesting that the higher local concentration of origins in the dimer facilitated their pairing. Physical evidence consistent with iteron-mediated pairing of origins preferentially in the dimer was obtained in vivo. Thus, origin handcuffing can be a mechanism to control P1 plasmid replication.

DnaA boxes in the P1 plasmid origin: the effect of their position on the directionality of replication and plasmid copy number

The DnaA protein is essential for initiation of DNA replication in a wide variety of bacterial and plasmid replicons. The replication origin in these replicons invariably contains specific binding sites for the protein, called DnaA boxes. Plasmid P1 contains a set of DnaA boxes at each end of its origin but can function with either one of the sets. Here we report that the location of origin-opening, initiation site of replication forks and directionality of replication do not change whether the boxes are present at both or at one of the ends of the origin. Replication was bidirectional in all cases. These results imply that DnaA functions similarly from the two ends of the origin. However, origins with DnaA boxes proximal to the origin-opening location opened more efficiently and maintained plasmids at higher copy numbers. Origins with the distal set were inactive unless the adjacent P1 DNA sequences beyond the boxes were included. At either end, phasing of the boxes with respect to the remainder of the origin influenced the copy number. Thus, although the boxes can be at either end, their precise context is critical for efficient origin function.

Control of plasmid DNA replication by iterons: no longer paradoxical

Replication origins of a family of bacterial plasmids have multiple sites, called iterons, for binding a plasmid-specific replication initiator protein. The iteron-initiator interactions are essential for plasmid replication as well as for inhibition of plasmid over-replication. The inhibition increases with plasmid copy number and eventually shuts plasmid replication off completely. The mechanism of inhibition appears to be handcuffing, the coupling of origins via iteron-bound initiators that block origin function. The probability of a trans-reaction such as handcuffing is expected to increase with plasmid copy number and diminish with increases in cell volume, explaining how the copy number can be maintained in a growing cell. Control is also exerted at the level of initiator synthesis and activation by chaperones. We propose that increases in active initiators promote initiation by overcoming handcuffing, but handcuffing dominates when the copy number reaches a threshold. Handcuffing should be ultrasensitive to copy number, as the negative control by iterons can be stringent (switch-like).

Replication-induced transcription of an autorepressed gene: the replication initiator gene of plasmid P1

The replication origin of plasmid P1 contains an array of five repeats (iterons) that bind the plasmid-encoded initiator RepA. Within the array lies the repA promoter, which becomes largely repressed on RepA binding (autorepression). One might expect that extra iterons produced on plasmid replication would titrate RepA and release the repression. The promoter, however, is induced poorly by extra iterons. The P1 copy number is reduced by extra iterons in the presence of the autorepressed repA gene but not when additional RepA is provided from constitutive sources. It has been proposed that the iteron-bound RepA couples with the promoter-bound RepA and thereby maintains repression. Although not the product of replication, we find that the act of replication itself can renew RepA synthesis. Replication apparently cleans the promoter of bound RepA and provides a window of opportunity for repA transcription. We propose that replication-induced transcription is required to ensure initiator availability in a system that is induced poorly when challenged with additional initiator binding sites.

Premature structural changes at replication origins in a yeast minichromosome maintenance (MCM) mutant

The Cdc7p protein kinase in the budding yeast Saccharomyces cerevisiae is thought to help trigger DNA replication by modifying one or more of the factors that assemble at replication origins (ARSs). To investigate events catalyzed by Cdc7p, we compared the structure of replication origins in cells containing conditional mutations in Cdc7p and Cdc8p, a thymidylate kinase that is required for DNA synthesis. High resolution genomic footprinting indicated that the presumptive lagging strand template in ARS1 became highly sensitive to KMnO(4) modification after the CDC7 execution point. These results suggested that Cdc7p triggers DNA unwinding. The transition from late G(1) phase to the CDC7 execution point and from the CDC7 to the CDC8 execution points was accompanied by small but ARS-dependent changes in DNA topology. These results suggested that DNA unwinding before the CDC8 execution point either is highly localized or that the torsional stress associated with initial DNA unwinding is minimized by compensatory protein-DNA structural changes. The ARS DNA structural attributes evident in cells blocked at the CDC8 execution point were also evident in alpha-factor-blocked, G(1) phase cells containing the CDC7 bypass mutant mcm5/cdc46-bob1. This result strongly suggests that the structural changes during the transition from the CDC7 to CDC8 execution points depend on the Cdc7p protein kinase and involve alteration of the minichromosome maintenance protein complex.

Role of bacterial chaperones in DNA replication

Studies on the involvement of chaperone proteins in DNA replication have been limited to a few replication systems, belonging primarily to the prokaryotic world. The insights gained from these studies have substantially contributed to our understanding of the eukaryotic DNA replication process as well. The finding that molecular chaperones can activate some initiation proteins before DNA synthesis has led to the more general suggestion that molecular chaperones can influence the DNA-binding activity of many proteins, including transcriptional factors involved in cell regulatory systems. The DnaK/DnaJ/GrpE molecular chaperone system became a paradigm of our understanding of fundamental processes, such as protein folding, translocation, selective proteolysis and autoregulation of the heat-shock response. Studies on the Clp ATPase family of molecular chaperones will help to define the nature of signals involved in chaperone-dependent proteins' refolding and the degradation of misfolded proteins.

The interaction of bacteriophage P2 B protein with Escherichia coli DnaB helicase

Bacteriophage P2 requires several host proteins for lytic replication, including helicase DnaB but not the helicase loader, DnaC. Some genetic studies have suggested that the loading is done by a phage-encoded protein, P2 B. However, a P2 minichromosome containing only the P2 initiator gene A and a marker gene can be established as a plasmid without requiring the P2 B gene. Here we demonstrate that P2 B associates with DnaB. This was done by using the yeast two-hybrid system in vivo and was confirmed in vitro, where (35)S-labeled P2 B bound specifically to DnaB adsorbed to Q Sepharose beads and monoclonal antibodies directed against the His-tagged P2 B protein were shown to coprecipitate the DnaB protein. Finally, P2 B was shown to stabilize the opening of a reporter origin, a reaction that is facilitated by the inactivation of DnaB. In this respect, P2 B was comparable to lambda P protein, which is known to be capable of binding and inactivating the helicase while acting as a helicase loader. Even though P2 B has little similarity to other known or predicted helicase loaders, we suggest that P2 B is required for efficient loading of DnaB and that this role, although dispensable for P2 plasmid replication, becomes essential for P2 lytic replication.