ATP-induced opposite changes in the local environments around Cys(697) (SH2) and Cys(707) (SH1) of the myosin motor domain revealed by the prodan fluorescence

Polarity-based fluorescence probes: properties and applications

Local polarity can affect the physical or chemical behaviors of surrounding molecules, especially in organisms. Cell polarity is the ultimate feedback of cellular status and regulation mechanisms. Hence, the abnormal alteration of polarity in organisms is closely linked with functional disorders and many diseases. It is incredibly significant to monitor and detect local polarity to explain the biological processes and diagnoses of some diseases. Because of their in vivo safe and real-time monitoring, several polarity-sensitive fluorophores and fluorescent probes have gradually emerged and been used in modern research. This review summarizes the fluorescence properties and applications of several representative polarity-sensitive fluorescent probes.

Optically sensing phospholipid induced coil-helix transitions in the phosphoinositide-binding motif of gelsolin

We present a systematic experimental and computational study of phospholipid induced peptide coil-helix transitions which are relevant in the context of proteins mediating cytoskeletal rearrangement via membrane binding. We developed a sensitive Förster resonance energy transfer (FRET) based assay to address whether coil-helix transitions in phospholipid binding motifs of actin-binding proteins can be induced by physiologically-relevant concentrations (1-20 μM) of phosphatidylinositol-4,5-bisphosphate (PI(4,5)P2) phospholipids. Based on inter-residue distance constraints obtained from Molecular Dynamics (MD) simulations of a 20 residue peptide (Gel 150-169) from the actin-severing protein gelsolin, we synthetized and labeled the peptide with a tryptophan donor and IAEDANS acceptor pair. Upon addition of PI(4,5)P2 micelles and mixed vesicles containing PI(4,5)P2 and phosphatidylcholine to the peptide, we observed a decrease in the tryptophan emission intensity with increasing concentrations of PI(4,5)P2. The IAEDANS emission spectra showed a more complex profile exhibiting a blue shift of the emission peak and non-monotonic changes in the intensity profile with increasing concentrations of PI(4,5)P2. We showed that the IAEDANS acceptor emission response is a result of both intrinsic polarity sensitivity of the acceptor in the vicinity of the membrane surface and fluorescence energy transfer from the donor. Importantly, the fluorescence lifetime of the donor (tryptophan) showed a monotonous decrease with increasing mol% of PI(4,5)P2 from 1.13 ± 0.10 ns in the absence of phospholipids to 0.25 ± 0.03 ns in the presence of 100% PI(4,5)P2 micelles. We also showed a concomitant increase in FRET efficiency with increasing PI(4,5)P2 levels indicating a PI(4,5)P2 concentration dependent coil-helix transition. Our studies demonstrate that membrane PI(4,5)P2 concentrations as low as 2.5-5 μM can trigger helix-coil conformational changes in gelsolin relevant for triggering regulatory processes in the cell.

UNC-45B chaperone: the role of its domains in the interaction with the myosin motor domain

The proper folding of many proteins can only be achieved by interaction with molecular chaperones. The molecular chaperone UNC-45B is required for the folding of striated muscle myosin II. However, the precise mechanism by which it contributes to proper folding of the myosin head remains unclear. UNC-45B contains three domains: an N-terminal TPR domain known to bind Hsp90, a Central domain of unknown function, and a C-terminal UCS domain known to interact with the myosin head. Here we used fluorescence titrations methods, dynamic light scattering, and single-molecule atomic force microscopy (AFM) unfolding/refolding techniques to study the interactions of the UCS and Central domains with the myosin motor domain. We found that both the UCS and the Central domains bind to the myosin motor domain. Our data show that the domains bind to distinct subsites on the myosin head, suggesting distinct roles in forming the myosin-UNC-45B complex. To determine the chaperone activity of the UCS and Central domains, we used two different methods: 1), prevention of misfolding using single-molecule AFM, and 2), prevention of aggregation using dynamic light scattering. Using the first method, we found that the UCS domain is sufficient to prevent misfolding of a titin mechanical reporter. Application of the second method showed that the UCS domain but not the Central domain prevents the thermal aggregation of the myosin motor domain. We conclude that while both the UCS and the Central domains bind the myosin head with high affinity, only the UCS domain displays chaperone activity.

Minimalist Approaches to Protein Labelling: Getting the Most Fluorescent Bang for Your Steric Buck

Fluorescence methods allow one to monitor protein conformational changes, protein–protein associations, and proteolysis in real time, at the single molecule level and in living cells. The information gained in such experiments is a function of the spectroscopic techniques used and the strategic placement of fluorophore labels within the protein structure. There is often a trade-off between size and utility for fluorophores, whereby large size can be disruptive to the protein’s fold or function, but valuable characteristics, such as visible wavelength absorption and emission or brightness, require sizable chromophores. Three major types of fluorophore readouts are commonly used: (1) Förster resonance energy transfer (FRET); (2) photoinduced electron transfer (PET); and (3) environmental sensitivity. This review focuses on those probes small enough to be incorporated into proteins during ribosomal translation, which allows the probes to be placed on the interiors of proteins as they are folded during synthesis. The most broadly useful method for doing so is site-specific unnatural amino acid (UAA) mutagenesis. We discuss the use of UAA probes in applications relying on FRET, PET, and environmental sensitivity. We also briefly review other methods of protein labelling and compare their relative merits to UAA mutagenesis. Finally, we discuss small probes that have thus far been used only in synthetic peptides, but which have unusual value and may be candidates for incorporation using UAA methods.

Macro-/micro-environment-sensitive chemosensing and biological imaging

We have summarized the research progress on fluorescent sensors responsive to environmental factors, including local viscosity, polarity, temperature, hypoxia and pH.

Fluorescent environment-sensitive dyes as reporters of biomolecular interactions

Monitoring biomolecular interactions is a fundamental issue in biosensing, with numerous applications ranging from biological research to clinical diagnostics. Fluorescent dyes capable of changing their color and brightness in response to changes of their environment properties, the so-called environment-sensitive dyes, have recently emerged as reporters of these interactions. The most well established of these are dyes that undergo excited-state charge transfer showing red shift of their single emission band with increase in the solvent polarity. The other promising class are dyes of the 3-hydroxychromone family that undergo excited-state intramolecular proton transfer and show solvent-sensitive dual emission. Examples of existing solvatochromic dyes and their biosensing applications are given, with particular focus on the 3-hydroxychromones. It is shown that solvatochromic dyes are powerful tools for monitoring conformation changes of proteins and their interactions with nucleic acids, proteins, and lipid membranes.

Tracking UNC-45 chaperone-myosin interaction with a titin mechanical reporter

Myosins are molecular motors that convert chemical energy into mechanical work. Allosterically coupling ATP-binding, hydrolysis, and binding/dissociation to actin filaments requires precise and coordinated structural changes that are achieved by the structurally complex myosin motor domain. UNC-45, a member of the UNC-45/Cro1/She4p family of proteins, acts as a chaperone for myosin and is essential for proper folding and assembly of myosin into muscle thick filaments in vivo. The molecular mechanisms by which UNC-45 interacts with myosin to promote proper folding of the myosin head domain are not known. We have devised a novel approach, to our knowledge, to analyze the interaction of UNC-45 with the myosin motor domain at the single molecule level using atomic force microscopy. By chemically coupling a titin I27 polyprotein to the motor domain of myosin, we introduced a mechanical reporter. In addition, the polyprotein provided a specific attachment point and an unambiguous mechanical fingerprint, facilitating our atomic force microscopy measurements. This approach enabled us to study UNC-45-motor domain interactions. After mechanical unfolding, the motor domain interfered with refolding of the otherwise robust I27 modules, presumably by recruiting them into a misfolded state. In the presence of UNC-45, I27 folding was restored. Our single molecule approach enables the study of UNC-45 chaperone interactions with myosin and their consequences for motor domain folding and misfolding in mechanistic detail.

Mechanism of interactions of alpha-naphthoflavone with cytochrome P450 3A4 explored with an engineered enzyme bearing a fluorescent probe

Design of a partially cysteine-depleted C98S/C239S/C377S/C468A cytochrome P450 3A4 mutant designated CYP3A4(C58,C64) allowed site-directed incorporation of thiol-reactive fluorescent probes into alpha-helix A. The site of modification was identified as Cys-64 with the help of CYP3A4(C58) and CYP3A4(C64), each bearing only one accessible cysteine. Changes in the fluorescence of CYP3A4(C58,C64) labeled with 6-(bromoacetyl)-2-(dimethylamino)naphthalene (BADAN), 7-(diethylamino)-3-(4'-maleimidylphenyl)-4-methylcoumarin (CPM), or monobromobimane (mBBr) were used to study the interactions with bromocriptine (BCT), 1-pyrenebutanol (1-PB), testosterone (TST), and alpha-naphthoflavone (ANF). Of these substrates only ANF has a specific effect, causing a considerable decrease in fluorescence intensity of BADAN and CPM and increasing the fluorescence of mBBr. This ANF-binding event in the case of the BADAN-modified enzyme is characterized by an S50 of 18.2 +/- 0.7, compared with the value of 2.2 +/- 0.3 for the ANF-induced spin transition, thus revealing an additional low-affinity binding site. Studies of the effect of TST, 1-PB, and BCT on the interactions of ANF monitored by changes in fluorescence of CYP3A4(C58,C64)-BADAN or by the ANF-induced spin transition revealed no competition by these substrates. Investigation of the kinetics of fluorescence increase upon H2O2-dependent heme depletion suggests that labeled CYP3A4(C58,C64) is represented by two conformers, one of which has the fluorescence of the BADAN and CPM labels completely quenched, presumably by photoinduced electron transfer from the neighboring Trp-72 and/or Tyr-68 residues. The binding of ANF to the newly discovered binding site appears to affect the interactions of the label with the above residue(s), thus modulating the fraction of the fluorescent conformer.

Requirement of the fixed end for spontaneous beating in flagella

It is well known that any part of a flagellum has the ability to bend. However, it is not clearly understood how flagella generate successive bending waves spontaneously. Some micromanipulation experiments have suggested that the base of the flagellum is required. By contrast, spontaneous bending waves could be generated in computer simulation work if the microtubules were tied together at one end. We hypothesized that the basal structure of flagella can only act as a tied end when the outer doublet microtubules are tightly bound together so as not to slide. We developed a new technique for introducing local inhibition at any position on the demembranated and reactivated flagellum. The flagellum maintained spontaneous beating when the local inhibition was introduced at any position on it. In addition, spontaneous beating occurred without the basal body when an artificial fixed region was introduced to the flagellum. We conclude that the axoneme, a bundle of microtubules, requires the fixed end for spontaneous beating.

Methane monooxygenase hydroxylase and B component interactions

The interaction of the soluble methane monooxygenase regulatory component (MMOB) and the active site-bearing hydroxylase component (MMOH) is investigated using spin and fluorescent probes. MMOB from Methylosinus trichosporium OB3b is devoid of cysteine. Consequently, site-directed mutagenesis was used to incorporate single cysteine residues, allowing specific placement of the probe molecules. Sixteen MMOB Cys mutants were prepared and labeled with the EPR spin probe 4-maleimido-2,2,6,6-tetramethyl-1-piperidinyloxy (MSL). Spectral evaluation of probe mobility and accessibility to the hydrophilic spin-relaxing agent NiEDDA showed that both properties decrease dramatically for a subset of the spin labels as the complex with MMOH forms, thereby defining the likely interaction surface on MMOB. This surface contains MMOB residue T111 thought to play a role in substrate access into the MMOH active site. The surface also contains several hydrophilic residues and is ringed by charged residues. The surface of MMOB opposite the proposed binding surface is highly charged, consistent with solvent exposure. Probes of both of the disordered N- and C-terminal regions remain highly mobile and exposed to solvent in the MMOH complex. Spin-labeling studies show that residue A62 of MMOB is located in a position where it can be used to monitor MMOH-MMOB complex formation without perturbing the process. Accordingly, steady-state kinetic assays show that it can be changed to Cys (A62C) and labeled with the fluorescent probes 6-bromoacetyl-2-dimethylaminonaphthalene (BADAN) or 5-((((2-iodoacetyl)amino)ethyl)amino)naphthalene-1-sulfonic acid (1,5-IAEDANS) without loss of the ability of MMOB to promote turnover. The BADAN fluorescence is partially quenched and red shifted as the complex with MMOH forms, allowing affinity measurements. It is shown that the high affinity of labeled MMOB (K(D) = 13.5 nM at pH 6.6, 25 degrees C) for the oxidized MMOH decreases substantially with increasing pH and increasing ionic strength but is nearly unaffected by addition of nonionic detergents. Similarly, the fluorescence anisotropy of the 1,5-IAEDANS-labeled A62C-MMOH complex is perturbed by salts but not nonionic detergents. This suggests that the MMOB-MMOH complex is stabilized by electrostatic interactions consistent with the characteristics of the proposed binding surface. Reduction of MMOH results in a 2-3 order of magnitude decrease in the affinity of the BADAN-labeled A62C-MMOB-MMOH complex, consistent with previous indications of structural change associated with reduction of the active site dinuclear iron cluster. Utilizing BADAN-labeled MMOB, the association and dissociation rate constants for the MMOB-MMOH binding reaction were determined and found to be consistent with a two-step process, possibly involving rapid association followed by a slower conformational change. The latter may be related to the regulation of substrate access into the active site of MMOH.

Interaction of thiamin diphosphate with phosphorylated and dephosphorylated mammalian pyruvate dehydrogenase complex

Kinetic and binding studies were carried out on substrate and cofactor interaction with the pyruvate dehydrogenase complex from bovine heart. Fluoropyruvate and pyruvamide, previously described as irreversible and allosteric inhibitors, respectively, are strong competitive inhibitors with respect to pyruvate. Binding of thiamin diphosphate was used to study differences between the active dephosphorylated and inactive phosphorylated enzyme states by spectroscopic methods. The change in both the intrinsic tryptophan fluorescence and the fluorescence of the 6-bromoacetyl-2-dimethylaminonaphthalene-labelled enzyme complex produced on addition of the cofactor showed similar binding behaviour for both enzyme forms, with slightly higher affinity for the phosphorylated form. Changes in the CD spectrum, especially the negative Cotton effect at 330 nm as a function of cofactor concentration, both in the absence and presence of pyruvate, also revealed no drastic differences between the two enzyme forms. Thus, inactivation of the enzyme activity of the pyruvate dehydrogenase complex is not caused by impeding the binding of substrate or cofactor.

Resolution of Cys and Lys labeling of alpha-crystallin with site-sensitive fluorescent 3-hydroxyflavone dye

Ratiometric fluorescent probes based on 3-hydroxyflavone (3HF) are highly sensitive tools for studying polarity, hydration, electronic polarizability, and electrostatics in different microheterogeneous systems, including protein molecules. In the present work, a reactive derivative of 3HF, 6-bromomethyl-4'-diethylamino-3-hydroxyflavone, recently synthesized in our group, was applied to label covalently bovine lens alpha-crystallin. The labeling of SH and NH(2) groups are clearly distinguished by spectroscopic criteria. We observe that the NH(2) labeling creates the positive charge in the proximity to fluorophore, which results in strong internal Stark effect producing the shift in excitation spectrum by ca. 15 nm. Analysis of excitation-dependent fluorescence spectra allows separation of the emission profiles of these SH- and NH(2)-labeled species. Applying recently developed multiparametric analysis of the obtained emission spectra, we described the physicochemical properties of the sites of SH and NH(2) labeling in alpha-crystallin. The site of SH labeling has medium-low polarity (dielectric constant, epsilon = 4.9 +/- 0.9) is protic, and does not contain proximal aromatic residues (according to the obtained refractive index, n = 1.41 +/- 0.14). The site of NH(2) labeling is also of medium-low polarity. The novel label due to its two-wavelength ratiometric response and high sensitivity to the type of labeling may offer new possibilities in the studies of structure, dynamics, and interactions of proteins by probing their SH- and NH(2)-labeling sites.

The elongation of yeast prion fibers involves separable steps of association and conversion

A self-perpetuating change in the conformation of the translation termination factor Sup35p is the basis for the prion [PSI+], a protein-based genetic element of Saccharomyces cerevisiae. In a process closely allied to in vivo conversion, the purified soluble, prion-determining region of Sup35p (NM) converts to amyloid fibers by means of nucleated conformational conversion. First, oligomeric species convert to nuclei, and these nuclei then promote polymerization of soluble protein into amyloid fibers. To elucidate the nature of the polymerization step, we created single-cysteine substitution mutants at different positions in NM to provide unique attachment sites for various probes. In vivo, the mutants behaved like wild-type protein in both the [psi-] and [PSI+] states. In vitro, they assembled with wild-type kinetics and formed fibers with the same morphologies. When labeled with fluorescent probes, two mutants, NMT158C and NME167C, exhibited a change in fluorescence coincident with amyloid assembly. These mutants provided a sensitive measure for the kinetics of fiber elongation, and the lag phase in conversion. The cysteine in the mutant NMK184C remained exposed after assembly. When labeled with biotin and bound to streptavidin beads, it was used to capture radiolabeled soluble NM in the process of conversion. This process established the existence of a detergent-susceptible intermediate in fiber elongation. Thus, the second stage of nucleated conformational conversion, fiber elongation, itself contains at least two steps: the association of soluble protein with preformed fibers to form an assembly intermediate, followed by conformational conversion into amyloid.

The identification of hydrophobic sites on the surface of proteins using absorption difference spectroscopy of bromophenol blue

Hydrophobic sites on the surface of protein molecules are thought to have important functional roles. The identification of such sites can provide information about the function and mode of interaction with other cellular components. While the fluorescence enhancement of polarity-sensitive dyes has been useful in identifying hydrophobic sites on a number of targets, strong intrinsic quenching of Nile red and ANSA dye fluorescence is observed on binding to a cytochrome c('). Fluorescence quenching is also observed to take place in the presence of a variety of other biologically important molecules which can compromise the quantitative determination of binding constants. Absorption difference spectroscopy is shown not to be sensitive to the presence of fluorescence quenchers but sensitive enough to measure binding constants. The dye BPB is shown to bind to the same hydrophobic sites on proteins as polarity-sensitive fluorescence probes. The absorption spectrum of BPB is also observed to be polarity sensitive. A binding constant of 3x10(6)M(-1) for BPB to BSA has been measured by absorption difference spectroscopy. An empirical correlation is observed between the shape of the absorption difference spectrum of BPB and the polarity of the environment. The results indicate that absorption difference spectroscopy of BPB provides a valuable supplement to fluorescence for determining the presence of hydrophobic sites on the surface of proteins as well as a method for measuring binding constants.

Molecular targeting of inhibitor of apoptosis proteins based on small molecule mimics of natural binding partners

An assay based on a solvent-sensitive fluorogenic dye molecule, badan, is used to test the binding affinity of a library of tetrapeptide molecules for the BIR3 (baculovirus IAP repeat) domain of XIAP (X-linked inhibitor of apoptosis protein). The fluorophore is attached to a tetrapeptide, Ala-Val-Pro-Cys-NH(2), through a thiol linkage and, upon binding to XIAP, undergoes a solvatochromic shift in fluorescence emission. When a molecule (e.g., a natural protein known to bind to XIAP or a tetrapeptide mimic) displaces the dye, the emission shifts back to the spectrum observed in water. As emission intensity is related to the binding of the tetrapeptide, the intensity can be used to determine the equilibrium constant, K, for the displacement of the dye by the tetrapeptide. The results permit residue-specific analysis of the interaction. Furthermore, we show that hydrophobic effects in the fourth position are general and can effectively increase overall affinity.