Kinetic mechanism of the Mg2+-dependent nucleotidyl transfer catalyzed by T4 DNA and RNA ligases

Characterisation and engineering of a thermophilic RNA ligase from Palaeococcus pacificus

RNA ligases are important enzymes in molecular biology and are highly useful for the manipulation and analysis of nucleic acids, including adapter ligation in next-generation sequencing of microRNAs. Thermophilic RNA ligases belonging to the RNA ligase 3 family are gaining attention for their use in molecular biology, for example a thermophilic RNA ligase from Methanobacterium thermoautotrophicum is commercially available for the adenylation of nucleic acids. Here we extensively characterise a newly identified RNA ligase from the thermophilic archaeon Palaeococcus pacificus (PpaRnl). PpaRnl exhibited significant substrate adenylation activity but low ligation activity across a range of oligonucleotide substrates. Mutation of Lys92 in motif I to alanine, resulted in an enzyme that lacked adenylation activity, but demonstrated improved ligation activity with pre-adenylated substrates (ATP-independent ligation). Subsequent structural characterisation revealed that in this mutant enzyme Lys238 was found in two alternate positions for coordination of the phosphate tail of ATP. In contrast mutation of Lys238 in motif V to glycine via structure-guided engineering enhanced ATP-dependent ligation activity via an arginine residue compensating for the absence of Lys238. Ligation activity for both mutations was higher than the wild-type, with activity observed across a range of oligonucleotide substrates with varying sequence and secondary structure.

Electrostatic fingerprints of catalytically active amino acids in enzymes

The computed electrostatic and proton transfer properties are studied for 20 enzymes that represent all six major enzyme commission classes and a variety of different folds. The properties of aspartate, glutamate, and lysine residues that have been previously experimentally determined to be catalytically active are reported. The catalytic aspartate and glutamate residues studied here are strongly coupled to at least one other aspartate or glutamate residue and often to multiple other carboxylate residues with intrinsic pK_a differences less than 1 pH unit. Sometimes these catalytic acidic residues are also coupled to a histidine residue, such that the intrinsic pK_a of the acidic residue is higher than that of the histidine. All catalytic lysine residues studied here are strongly coupled to tyrosine or cysteine residues, wherein the intrinsic pK_a of the anion-forming residue is higher than that of the lysine. Some catalytic lysines are also coupled to other lysines with intrinsic pK_a differences within 1 pH unit. Some evidence of the possible types of interactions that facilitate nucleophilicity is discussed. The interactions reported here provide important clues about how side chain functional groups that are weak Brønsted acids or bases for the free amino acid in solution can achieve catalytic potency and become strong acids, bases or nucleophiles in the enzymatic environment.

Single nucleotide translation without ribosomes

The translation of messenger RNA sequences into polypeptide sequences according to the genetic code is central to life. How this process, which relies on the ribosomal machinery, arose from much simpler precursors is unclear. Here, we demonstrate that single nucleotides charged with an amino acid couple with amino acids linked to the 5'-terminus of an RNA primer in reactions directed by the nucleotides of an RNA template in dilute aqueous solution at 0 °C. When a mixture of U-Val, A-Gly and G-Leu competed for coupling to Gly-RNA, base pairing dictated which dipeptide sequence formed preferentially. The resulting doubly anchored dipeptides can retain their link to the primer for further extension or can be fully released under mild acidic conditions. These results show that a single-nucleotide-based form of translation exists that requires no more than oligoribonucleotides and anchored amino acids.

Synthesis and "DNA Interlocks" Formation of Small Circular Oligodeoxynucleotides

Circular oligodeoxynucleotides (c-ODNs) have their particular characteristics in topological properties. However, different from oligoribonucleotides, enzymatic synthesis of small c-ODNs is still challenging using conventional methods. Herein, we successfully achieved highly efficient cyclization of linear single-stranded ODNs using T4 DNA ligase simply through the frozen/lyophilization/cyclization (FLC) method. We successfully shortened the cyclization length of linear ODNs to 20 nt (l-ODN 20) with up to 63% yield, which was never achieved before through normal enzymatic methods. With the efficient FLC method, we further developed "DNA interlocks" which were intercross-linked with multiple c-ODNs using the one-pot FLC method. This FLC strategy provides a powerful, cheap, and convenient method to synthesize small c-ODNs for studying DNA nanotechnology and paves the way to achieve future deciphering of c-ODN functions.

Cyclization of secondarily structured oligonucleotides to single-stranded rings by using Taq DNA ligase at high temperatures

Single-stranded DNA rings play important roles in nanoarchitectures, molecular machines, DNA detection, etc. Although T4 DNA ligase has been widely employed to cyclize single-stranded oligonucleotides into rings, the cyclization efficiency is very low when the oligonucleotides (l-DNAs) take complicated secondary structures at ambient temperatures. In the present study, this problem has been solved by using Thermus aquaticus DNA ligase (Taq DNA ligase) at higher temperatures (65 and 70 °C) where the secondary structures are less stable or completely destroyed. This method is based on our new finding that this ligase successfully functions even when the splint strand is short and forms no stable duplex with l-DNA (at least in the absence of the enzyme). In order to increase the efficiency of cyclization, various operation factors (lengths and sequences of splint, as well as the size of the DNA ring) have been investigated. Based on these results, DNA rings have been successfully synthesized from secondarily structured oligonucleotides in high yields and high selectivity. The present methodology is applicable to the preparation of versatile DNA rings involving complicated secondary structures, which should show novel properties and greatly widen the scope of DNA-based nanotechnology.

We have achieved the efficient preparation of single-stranded DNA rings from secondarily structured oligonucleotides.

Highly efficient preparation of single-stranded DNA rings by T4 ligase at abnormally low Mg(II) concentration

Preparation of large amount of single-stranded circular DNA in high selectivity is crucial for further developments of nanotechnology and other DNA sciences. Herein, a simple but practically useful methodology to prepare DNA rings has been presented. One of the essential factors is to use highly diluted T4 ligase buffer for ligase reactions. This strategy is based on our unexpected finding that, in diluted T4 buffers, intermolecular polymerization of DNA fragments is greatly suppressed with respect to their intramolecular cyclization. This promotion of cyclization is attributable to abnormally low concentration of Mg2+ ion (0.5-1.0 mM) but not ATP in the media for T4 ligase reactions. The second essential factor is to add DNA substrate intermittently to the mixture and maintain its temporal concentration low. By combining these two factors, single-stranded DNA rings of various sizes (31-74 nt) were obtained in high selectivity (89 mol% for 66-nt DNA) and in satisfactorily high productivity (∼0.2 mg/ml). A linear 72-nt DNA was converted to the corresponding DNA ring in nearly 100% selectivity. The superiority of this new method was further substantiated by the fact that small-sized DNA rings (31-42 nt), which were otherwise hardly obtainable, were successfully prepared in reasonable yields.

CheckMyMetal: a macromolecular metal-binding validation tool

Metals are essential in many biological processes, and metal ions are modeled in roughly 40% of the macromolecular structures in the Protein Data Bank (PDB). However, a significant fraction of these structures contain poorly modeled metal-binding sites. CheckMyMetal (CMM) is an easy-to-use metal-binding site validation server for macromolecules that is freely available at http://csgid.org/csgid/metal_sites. The CMM server can detect incorrect metal assignments as well as geometrical and other irregularities in the metal-binding sites. Guidelines for metal-site modeling and validation in macromolecules are illustrated by several practical examples grouped by the type of metal. These examples show CMM users (and crystallographers in general) problems they may encounter during the modeling of a specific metal ion.

Rapid Time Scale Analysis of T4 DNA Ligase-DNA Binding

DNA ligases, essential to both in vivo genome integrity and in vitro molecular biology, catalyze phosphodiester bond formation between adjacent 3'-OH and 5'-phosphorylated termini in dsDNA. This reaction requires enzyme self-adenylylation, using ATP or NAD⁺ as a cofactor, and AMP release concomitant with phosphodiester bond formation. In this study, we present the first fast time scale binding kinetics of T4 DNA ligase to both nicked substrate DNA (nDNA) and product-equivalent non-nicked dsDNA, as well as binding and release kinetics of AMP. The described assays utilized a fluorescein-dT labeled DNA substrate as a reporter for ligase·DNA interactions via stopped-flow fluorescence spectroscopy. The analysis revealed that binding to nDNA by the active adenylylated ligase occurs in two steps, an initial rapid association equilibrium followed by a transition to a second bound state prior to catalysis. Furthermore, the ligase binds and dissociates from nicked and nonsubstrate dsDNA rapidly with initial association affinities on the order of 100 nM regardless of enzyme adenylylation state. DNA binding occurs through a two-step mechanism in all cases, confirming prior proposals of transient binding followed by a transition to a productive ligase·nDNA (Lig·nDNA) conformation but suggesting that weaker nonproductive "closed" complexes are formed as well. These observations demonstrate the mechanistic underpinnings of competitive inhibition by rapid binding of nonsubstrate DNA, and of substrate inhibition by blocking of the self-adenylylation reaction through nick binding by deadenylylated ligase. Our analysis further reveals that product release is not the rate-determining step in turnover.

The Inhibitory Effect of Non-Substrate and Substrate DNA on the Ligation and Self-Adenylylation Reactions Catalyzed by T4 DNA Ligase

DNA ligases are essential both to in vivo replication, repair and recombination processes, and in vitro molecular biology protocols. Prior characterization of DNA ligases through gel shift assays has shown the presence of a nick site to be essential for tight binding between the enzyme and its dsDNA substrate, with no interaction evident on dsDNA lacking a nick. In the current study, we observed a significant substrate inhibition effect, as well as the inhibition of both the self-adenylylation and nick-sealing steps of T4 DNA ligase by non-nicked, non-substrate dsDNA. Inhibition by non-substrate DNA was dependent only on the total DNA concentration rather than the structure; with 1 μg/mL of 40-mers, 75-mers, or circular plasmid DNA all inhibiting ligation equally. A >15-fold reduction in T4 DNA ligase self-adenylylation rate when in the presence of high non-nicked dsDNA concentrations was observed. Finally, EMSAs were utilized to demonstrate that non-substrate dsDNA can compete with nicked dsDNA substrates for enzyme binding. Based upon these data, we hypothesize the inhibition of T4 DNA ligase by non-nicked dsDNA is direct evidence for a two-step nick-binding mechanism, with an initial, nick-independent, transient dsDNA-binding event preceding a transition to a stable binding complex in the presence of a nick site.

Coevolution of RtcB and Archease created a multiple-turnover RNA ligase

RtcB is a noncanonical RNA ligase that joins either 2',3'-cyclic phosphate or 3'-phosphate termini to 5'-hydroxyl termini. The genes encoding RtcB and Archease constitute a tRNA splicing operon in many organisms. Archease is a cofactor of RtcB that accelerates RNA ligation and alters the NTP specificity of the ligase from Pyrococcus horikoshii. Yet, not all organisms that encode RtcB also encode Archease. Here we sought to understand the differences between Archease-dependent and Archease-independent RtcBs so as to illuminate the evolution of Archease and its function. We report on the Archease-dependent RtcB from Thermus thermophilus and the Archease-independent RtcB from Thermobifida fusca. We find that RtcB from T. thermophilus can catalyze multiple turnovers only in the presence of Archease. Remarkably, Archease from P. horikoshii can activate T. thermophilus RtcB, despite low sequence identity between the Archeases from these two organisms. In contrast, RtcB from T. fusca is a single-turnover enzyme that is unable to be converted into a multiple-turnover ligase by Archease from either P. horikoshii or T. thermophilus. Thus, our data indicate that Archease likely evolved to support multiple-turnover activity of RtcB and that coevolution of the two proteins is necessary for a functional interaction.

Structure and two-metal mechanism of a eukaryal nick-sealing RNA ligase

ATP-dependent RNA ligases are agents of RNA repair that join 3'-OH and 5'-PO4 RNA ends. Naegleria gruberi RNA ligase (NgrRnl) exemplifies a family of RNA nick-sealing enzymes found in bacteria, viruses, and eukarya. Crystal structures of NgrRnl at three discrete steps along the reaction pathway-covalent ligase-(lysyl-Nζ)-AMP•Mn(2+) intermediate; ligase•ATP•(Mn(2+))2 Michaelis complex; and ligase•Mn(2+) complex-highlight a two-metal mechanism of nucleotidyl transfer, whereby (i) an enzyme-bound "catalytic" metal coordination complex lowers the pKa of the lysine nucleophile and stabilizes the transition state of the ATP α phosphate; and (ii) a second metal coordination complex bridges the β- and γ-phosphates. The NgrRnl N domain is a distinctively embellished oligonucleotide-binding (OB) fold that engages the γ-phosphate and associated metal complex and orients the pyrophosphate leaving group for in-line catalysis with stereochemical inversion at the AMP phosphate. The unique domain architecture of NgrRnl fortifies the theme that RNA ligases have evolved many times, and independently, by fusions of a shared nucleotidyltransferase domain to structurally diverse flanking modules. The mechanistic insights to lysine adenylylation gained from the NgrRnl structures are likely to apply broadly to the covalent nucleotidyltransferase superfamily of RNA ligases, DNA ligases, and RNA capping enzymes.

Effects of 2'-O-methyl nucleotide on ligation capability of T4 DNA ligase

To further understand the ligation mechanism, effects of 2'-O-methyl nucleotide (2'-OMeN) on the T4 DNA ligation efficiency were investigated. Fluorescence resonance energy transfer assay was used to monitor the nick-joining process by T4 DNA ligase. Results showed that substitutions at 5'- and 3'-ends of the nick decreased the ligation efficiency by 48.7% ± 6.7% and 70.6% ± 4.0%, respectively. Substitutions at both 5'- and 3'-ends decreased the ligation efficiency by 76.6% ± 1.3%. Corresponding kinetic parameters, Vmax, Km, and kcat, have been determined in each case by using the Michaelis-Menten equation. The kinetic data showed that the 2'-OMeN substitutions reduced the maximal initial velocity and increased the Michaelis constant of T4 DNA ligase. Mismatches at 5'- and 3'-ends of the nick have also shown different influences on the ligation. Results here showed that the sugar pucker conformation at 3'-end impairs the ligation efficiency more profoundly than that at 5'-end. Different concentrations of Mg(2+), Ca(2+), K(+), Na(+), and ATP were also demonstrated to affect the T4 DNA ligase activity. These results enriched our knowledge about the effects of 2'-OMeN substitutions on the T4 DNA ligase.

Kinetic characterization of on-chip DNA ligation on dendron-coated surfaces with nanoscaled lateral spacings

We analyzed the enzymatic profiles of on-chip DNA ligation as we controlled the lateral spacing of surface-immobilized DNA substrates using dendron molecules with different sizes at the nanoscale. Enzymatic on-chip DNA ligation was performed on the dendron-coated surface within 20 min with no need for post-ligation gel electrophoresis. The enzymatic DNA repair was assessed by the fluorescence intensity at the repaired DNA duplex after thermally dissociating the unligated Cy3-labeled DNA from the DNA duplex, in which the Cy3-labeled DNA was hybridized prior to the on-chip DNA ligation. The rate of the nick-sealing reaction on the 27-acid dendron surface was 3-fold higher than that on the 9-acid dendron surface, suggesting that the wider lateral spacing determined by the larger dendron molecule could facilitate the access of DNA ligase to the nick site. The performance of on-chip DNA ligation was dropped to 10% and 3% when the nick was replaced by one- and two-nucleotide-long gaps, respectively. The 5' terminal phosphorylation of DNA strands by polynucleotide kinase and the on-chip DNA cleavage by endonucleases were also quantitatively monitored throughout the on-chip DNA ligation on the dendron-coated surface. A better understanding of the enzymatic kinetics of on-chip DNA ligation will contribute to a more reliable performance of various on-chip DNA ligation-based assays.

Structures of the noncanonical RNA ligase RtcB reveal the mechanism of histidine guanylylation

RtcB is an atypical RNA ligase that joins either 2',3'-cyclic phosphate or 3'-phosphate termini to 5'-hydroxyl termini. In contrast to typical RNA ligases, which rely on ATP and Mg(II), catalysis by RtcB is dependent on GTP and Mn(II) with ligation proceeding through a covalent RtcB-histidine-GMP intermediate. Here, we present three structures of Pyrococcus horikoshii RtcB complexes that capture snapshots along the entire guanylylation pathway. These structures show that prior to binding GTP, a single manganese ion (Mn1) is bound to RtcB. To capture the step immediately preceding RtcB guanylylation, we determined a structure of RtcB in complex with Mn(II) and the unreactive GTP analogue guanosine 5'-(α-thio)triphosphate (GTPαS). This structure shows that Mn1 is poised to stabilize the pentavalent transition state of guanylylation while a second manganese ion (Mn2) is coordinated to a nonbridging oxygen of the γ-phosphoryl group. The pyrophosphate leaving group of GTPαS is oriented apically to His404 with the ε-nitrogen poised for in-line attack on the α-phosphorus atom. The structure of RtcB in complex with GTPαS also reveals the network of hydrogen bonds that recognize GTP and illuminates the significant conformational changes that accompany the binding of this cofactor. Finally, a structure of the enzymic histidine-GMP intermediate depicts the end of the guanylylation pathway. The ensuing molecular description of the RtcB guanylylation pathway shows that RtcB and classical ATP- and Mg(II)-dependent nucleic acid ligases have converged upon a similar two-metal mechanism for formation of the nucleotidylated enzyme intermediate.

Designing novel inhibitors of Trypanosoma brucei

Computational simulations of essential biological systems in pathogenic organisms are increasingly being used to reveal structural and dynamical features for targets of interest. At the same time, increased research efforts, especially from academia, have been directed toward drug discovery for neglected tropical diseases. Although these diseases cripple large populations in less fortunate parts of the world, either very few new drugs are being developed or the available treatments for them have severe side effects, including death. This chapter walks readers through a computational investigation used to find novel inhibitors to target one of these neglected diseases, African sleeping sickness (human African trypanosomiasis). Such studies may suggest novel small-molecule compounds that could be considered as part of an early-stage drug discovery effort. As an example target protein of interest, we focus on the essential protein RNA-editing ligase 1 (REL1) in Trypanosoma brucei, the causative agent of human African trypanosomiasis.

Kinetic analysis of DNA strand joining by Chlorella virus DNA ligase and the role of nucleotidyltransferase motif VI in ligase adenylylation

Chlorella virus DNA ligase (ChVLig) is an instructive model for mechanistic studies of the ATP-dependent DNA ligase family. ChVLig seals 3'-OH and 5'-PO(4) termini via three chemical steps: 1) ligase attacks the ATP α phosphorus to release PP(i) and form a covalent ligase-adenylate intermediate; 2) AMP is transferred to the nick 5'-phosphate to form DNA-adenylate; 3) the 3'-OH of the nick attacks DNA-adenylate to join the polynucleotides and release AMP. Each chemical step requires Mg(2+). Kinetic analysis of nick sealing by ChVLig-AMP revealed that the rate constant for phosphodiester synthesis (k(step3) = 25 s(-1)) exceeds that for DNA adenylylation (k(step2) = 2.4 s(-1)) and that Mg(2+) binds with similar affinity during step 2 (K(d) = 0.77 mM) and step 3 (K(d) = 0.87 mM). The rates of DNA adenylylation and phosphodiester synthesis respond differently to pH, such that step 3 becomes rate-limiting at pH ≤ 6.5. The pH profiles suggest involvement of one and two protonation-sensitive functional groups in catalysis of steps 2 and 3, respectively. We suggest that the 5'-phosphate of the nick is the relevant protonation-sensitive moiety and that a dianionic 5'-phosphate is necessary for productive step 2 catalysis. Motif VI, located at the C terminus of the OB-fold domain of ChVLig, is a conserved feature of ATP-dependent DNA ligases and GTP-dependent mRNA capping enzymes. Presteady state and burst kinetic analysis of the effects of deletion and missense mutations highlight the catalytic contributions of ChVLig motif VI, especially the Asp-297 carboxylate, exclusively during the ligase adenylylation step.

Kinetic characterization of single strand break ligation in duplex DNA by T4 DNA ligase

T4 DNA ligase catalyzes phosphodiester bond formation between juxtaposed 5'-phosphate and 3'-hydroxyl termini in duplex DNA in three steps: 1) enzyme-adenylylate formation by reaction with ATP; 2) adenylyl transfer to a 5'-phosphorylated polynucleotide to generate adenylylated DNA; and 3) phosphodiester bond formation with release of AMP. This investigation used synthetic, nicked DNA substrates possessing either a 5'-phosphate or a 5'-adenylyl phosphate. Steady state experiments with a nicked substrate containing juxtaposed dC and 5'-phosphorylated dT deoxynucleotides (substrate 1) yielded kcat and kcat/Km values of 0.4±0.1 s(-1) and 150±50 μm(-1) s(-1), respectively. Under identical reaction conditions, turnover of an adenylylated version of this substrate (substrate 1A) yielded kcat and kcat/Km values of 0.64±0.08 s(-1) and 240±40 μm(-1) s(-1). Single turnover experiments utilizing substrate 1 gave fits for the forward rates of Step 2 (k2) and Step 3 (k3) of 5.3 and 38 s(-1), respectively, with the slowest step ∼10-fold faster than the rate of turnover seen under steady state conditions. Single turnover experiments with substrate 1A produced a Step 3 forward rate constant of 4.3 s(-1), also faster than the turnover rate of 1A. Enzyme self-adenylylation was confirmed to also occur on a fast time scale (∼6 s(-1)), indicating that the rate-limiting step for T4 DNA ligase nick sealing is not a chemical step but rather is most likely product release. Pre-steady state reactions displayed a clear burst phase, consistent with this conclusion.

Kinetic mechanism of human DNA ligase I reveals magnesium-dependent changes in the rate-limiting step that compromise ligation efficiency

DNA ligase I (LIG1) catalyzes the ligation of single-strand breaks to complete DNA replication and repair. The energy of ATP is used to form a new phosphodiester bond in DNA via a reaction mechanism that involves three distinct chemical steps: enzyme adenylylation, adenylyl transfer to DNA, and nick sealing. We used steady state and pre-steady state kinetics to characterize the minimal mechanism for DNA ligation catalyzed by human LIG1. The ATP dependence of the reaction indicates that LIG1 requires multiple Mg(2+) ions for catalysis and that an essential Mg(2+) ion binds more tightly to ATP than to the enzyme. Further dissection of the magnesium ion dependence of individual reaction steps revealed that the affinity for Mg(2+) changes along the reaction coordinate. At saturating concentrations of ATP and Mg(2+) ions, the three chemical steps occur at similar rates, and the efficiency of ligation is high. However, under conditions of limiting Mg(2+), the nick-sealing step becomes rate-limiting, and the adenylylated DNA intermediate is prematurely released into solution. Subsequent adenylylation of enzyme prevents rebinding to the adenylylated DNA intermediate comprising an Achilles' heel of LIG1. These ligase-generated 5'-adenylylated nicks constitute persistent breaks that are a threat to genomic stability if they are not repaired. The kinetic and thermodynamic framework that we have determined for LIG1 provides a starting point for understanding the mechanism and specificity of mammalian DNA ligases.

Toward understanding the conformational dynamics of RNA ligation

Members of the genus Trypanosoma, which include the pathogenic species Trypanosoma brucei and Trypanosoma cruzi, edit their post-transcriptional mitochondrial RNA via a multiprotein complex called the editosome. In T. brucei, the RNA is nicked prior to uridylate insertion and deletion. Following editing, nicked RNA is religated by one of two RNA-editing ligases (TbREL). This study describes a recent 70 ns molecular dynamics simulation of TbREL1, an ATP-dependent RNA-editing ligase of the nucleotidyltransferase superfamily that is required for the survival of T. brucei insect and bloodstream forms. In this work, a model of TbREL1 in complex with its full double-stranded RNA (dsRNA) substrate is created on the basis of the homologous relation between TbREL1 and T4 Rnl2. The simulation captures TbREL1 dynamics in the state immediately preceding RNA ligation, providing insights into the functional dynamics and catalytic mechanism of the kinetoplastid ligation reaction. Important features of RNA binding and specificity are revealed for kinetoplastid ligases and the broader nucleotidyltransferase superfamily.

The associative nature of adenylyl transfer catalyzed by T4 DNA ligase

DNA ligase seals nicks in dsDNA using chemical energy of the phosphoanhydride bond in ATP or NAD(+) and assistance of a divalent metal cofactor Mg(2+). Molecular details of ligase catalysis are essential for understanding the mechanism of metal-promoted phosphoryl transfer reactions in the living cell responsible for a wide range of processes, e.g., DNA replication and transcription, signaling and differentiation, energy coupling and metabolism. Here we report a single-turnover (31)P solid-state NMR study of adenylyl transfer catalyzed by DNA ligase from bacteriophage T4. Formation of a high-energy covalent ligase-nucleotide complex is triggered in situ by the photo release of caged Mg(2+), and sequentially formed intermediates are monitored by NMR. Analyses of reaction kinetics and chemical-shift changes indicate that the pentacoordinated phosphorane intermediate builds up to 35% of the total reacting species after 4-5 h of reaction. This is direct experimental evidence of the associative nature of adenylyl transfer catalyzed by DNA ligase. NMR spectroscopy in rotating solids is introduced as an analytical tool for recording molecular movies of reaction processes. Presented work pioneers a promising direction in structural studies of biochemical transformations.

Functional and structural insights revealed by molecular dynamics simulations of an essential RNA editing ligase in Trypanosoma brucei

RNA editing ligase 1 (TbREL1) is required for the survival of both the insect and bloodstream forms of Trypanosoma brucei, the parasite responsible for the devastating tropical disease African sleeping sickness. The type of RNA editing that TbREL1 is involved in is unique to the trypanosomes, and no close human homolog is known to exist. In addition, the high-resolution crystal structure revealed several unique features of the active site, making this enzyme a promising target for structure-based drug design. In this work, two 20 ns atomistic molecular dynamics (MD) simulations are employed to investigate the dynamics of TbREL1, both with and without the ATP substrate present. The flexibility of the active site, dynamics of conserved residues and crystallized water molecules, and the interactions between TbREL1 and the ATP substrate are investigated and discussed in the context of TbREL1's function. Differences in local and global motion upon ATP binding suggest that two peripheral loops, unique to the trypanosomes, may be involved in interdomain signaling events. Notably, a significant structural rearrangement of the enzyme's active site occurs during the apo simulations, opening an additional cavity adjacent to the ATP binding site that could be exploited in the development of effective inhibitors directed against this protozoan parasite. Finally, ensemble averaged electrostatics calculations over the MD simulations reveal a novel putative RNA binding site, a discovery that has previously eluded scientists. Ultimately, we use the insights gained through the MD simulations to make several predictions and recommendations, which we anticipate will help direct future experimental studies and structure-based drug discovery efforts against this vital enzyme.

Mutational analysis of bacterial NAD+-dependent DNA ligase: role of motif IV in ligation catalysis

The bacterial DNA ligase as a multiple domain protein is involved in DNA replication, repair and recombination. Its catalysis of ligation can be divided into three steps. To delineate the roles of amino acid residues in motif IV in ligation catalysis, site-directed mutants were constructed in a bacterial NAD+-dependent DNA ligase from Thermus sp. TAK16D. It was shown that four conserved residues (D286, G287, V289 and K291) in motif IV had significant roles on the overall ligation. Under single turnover conditions, the observed apparent rates of D286E, G287A, V289I and K291R mutants were clearly reduced compared with that of WT ligase on both match and mismatch nicked substrates. The effects of D286E mutation on overall ligation may not only be ascribed to the third step. The G287A mutation has a major effect on the second step. The effects of V289I and K291R mutation on overall ligation are not on the third step, perhaps other aspects, such as conformation change of ligase protein in ligation catalysis, are involved. Moreover, the amino acid substitutions of above four residues were more sensitive on mismatch nicked substrate, indicating an enhanced ligation fidelity.

Molecular architecture and ligand recognition determinants for T4 RNA ligase

RNA ligase type 1 from bacteriophage T4 (Rnl1) is involved in countering a host defense mechanism by repairing 5'-PO4 and 3'-OH groups in tRNA(Lys). Rnl1 is widely used as a reagent in molecular biology. Although many structures for DNA ligases are available, only fragments of RNA ligases such as Rnl2 are known. We report the first crystal structure of a complete RNA ligase, Rnl1, in complex with adenosine 5'-(alpha,beta-methylenetriphosphate) (AMPcPP). The N-terminal domain is related to the equivalent region of DNA ligases and Rnl2 and binds AMPcPP but with further interactions from the additional N-terminal 70 amino acids in Rnl1 (via Tyr37 and Arg54) and the C-terminal domain (Gly269 and Asp272). The active site contains two metal ions, consistent with the two-magnesium ion catalytic mechanism. The C-terminal domain represents a new all alpha-helical fold and has a charge distribution and architecture for helix-nucleic acid groove interaction compatible with tRNA binding.

Catalytic mechanism of Escherichia coli ribonuclease III: kinetic and inhibitor evidence for the involvement of two magnesium ions in RNA phosphodiester hydrolysis

Escherichia coli ribonuclease III (RNase III; EC 3.1.24) is a double-stranded(ds)-RNA-specific endonuclease with key roles in diverse RNA maturation and decay pathways. E.coli RNase III is a member of a structurally distinct superfamily that includes Dicer, a central enzyme in the mechanism of RNA interference. E.coli RNase III requires a divalent metal ion for activity, with Mg²⁺ as the preferred species. However, neither the function(s) nor the number of metal ions involved in catalysis is known. To gain information on metal ion involvement in catalysis, the rate of cleavage of the model substrate R1.1 RNA was determined as a function of Mg²⁺ concentration. Single-turnover conditions were applied, wherein phosphodiester cleavage was the rate-limiting event. The measured Hill coefficient (n_H) is 2.0 ± 0.1, indicative of the involvement of two Mg²⁺ ions in phosphodiester hydrolysis. It is also shown that 2-hydroxy-4H-isoquinoline-1,3-dione—an inhibitor of ribonucleases that employ two divalent metal ions in their catalytic sites—inhibits E.coli RNase III cleavage of R1.1 RNA. The IC₅₀ for the compound is 14 μM for the Mg²⁺-supported reaction, and 8 μM for the Mn²⁺-supported reaction. The compound exhibits noncompetitive inhibitory kinetics, indicating that it does not perturb substrate binding. Neither the O-methylated version of the compound nor the unsubstituted imide inhibit substrate cleavage, which is consistent with a specific interaction of the N-hydroxyimide with two closely positioned divalent metal ions. A preliminary model is presented for functional roles of two divalent metal ions in the RNase III catalytic mechanism.

Complex management: RNA editing in trypanosomes

Most mitochondrial mRNAs in kinetoplastids require editing, that is, the posttranscriptional insertion and deletion of uridine nucleotides that are specified by guide RNAs and catalyzed by multiprotein complexes. Recent studies have identified many of the proteins in these complexes, in addition to some of their functions and interactions. Although much remains unknown, a picture of highly organized complexes is emerging that shows that the complex that catalyzes the central steps of editing is partitioned into distinct insertion and deletion editing subcomplexes. These subcomplexes coordinate hundreds of ordered catalytic steps that function to produce a single mature mRNA. The dynamic processes, which might entail interactions among multiprotein complexes and changes in their composition and conformation, remain to be elucidated.

High resolution crystal structure of a key editosome enzyme from Trypanosoma brucei: RNA editing ligase 1

Trypanosomatids are causative agents of several devastating tropical diseases such as African sleeping sickness, Chagas' disease and leishmaniasis. There are no effective vaccines available to date for treatment of these protozoan diseases, while current drugs have limited efficacy, significant toxicity and suffer from increasing resistance. Trypanosomatids have several remarkable and unique metabolic and structural features that are of great interest for developing new anti-protozoan therapeutics. One such feature is "RNA editing", an essential process in these pathogenic protozoa. Transcripts for key trypanosomatid mitochondrial proteins undergo extensive post-transcriptional RNA editing by specifically inserting or deleting uridylates from pre-mature mRNA in order to create mature mRNAs that encode functional proteins. The RNA editing process is carried out in a approximately 1.6 MDa multi-protein complex, the editosome. In Trypanosoma brucei, one of the editosome's core enzymes, the RNA editing ligase 1 (TbREL1), has been shown to be essential for survival of both insect and bloodstream forms of the parasite. We report here the crystal structure of the catalytic domain of TbREL1 at 1.2 A resolution, in complex with ATP and magnesium. The magnesium ion interacts with the beta and gamma-phosphate groups and is almost perfectly octahedrally coordinated by six phosphate and water oxygen atoms. ATP makes extensive direct and indirect interactions with the ligase via essentially all its atoms while extending its base into a deep pocket. In addition, the ATP makes numerous interactions with residues that are conserved in the editing ligases only. Further away from the active site, TbREL1 contains a unique loop containing several hydrophobic residues that are highly conserved among trypanosomatid RNA editing ligases which may play a role in protein-protein interactions in the editosome. The distinct characteristics of the adenine-binding pocket, and the absence of any close homolog in the human genome, bode well for the design of selective inhibitors that will block the essential RNA ligase function in a number of major protozoan pathogens.

Unique ligation properties of eukaryotic NAD+-dependent DNA ligase from Melanoplus sanguinipes entomopoxvirus

The eukaryotic Melanoplus sanguinipes entomopoxvirus (MsEPV) genome reveals a homologous sequence to eubacterial nicotinamide adenine dinucleotide (NAD(+))-dependent DNA ligases [J. Virol. 73 (1999) 533]. This 522-amino acid open reading frame (ORF) contains all conserved nucleotidyl transferase motifs but lacks the zinc finger motif and BRCT domain found in conventional eubacterial NAD(+) ligases. Nevertheless, cloned MsEPV ligase seals DNA nicks in a NAD(+)-dependent fashion, while adenosine 5'-monophosphate (ATP) cannot serve as an adenylation cofactor. The ligation activity of MsEPV ligase requires Mg(2+) or Mn(2+). MsEPV ligase seals sticky ends efficiently, but has little activity on 1-nucleotide gap or blunt-ended DNA substrates even in the presence of polyethylene glycol. In comparison, bacterial NAD(+)-dependent ligases seal blunt-ended DNA substrates in the presence of polyethylene glycol. MsEPV DNA ligase readily joins DNA nicks with mismatches at either side of the nick junction, except for mismatches at the nick junction containing an A base in the template strand (A/A, G/A, and C/A). MsEPV NAD(+)-dependent DNA ligase can join DNA probes on RNA templates, a unique property that distinguishes this enzyme from other conventional bacterial NAD(+) DNA ligases. T4 ATP-dependent DNA ligase shows no detectable mismatch ligation at the 3' side of the nick but substantial 5' T/G mismatch ligation on an RNA template. In contrast, MsEPV ligase joins mismatches at the 3' side of the nick more frequently than at the 5' side of the nick on an RNA template. The complementary specificities of these two enzymes suggest alternative primer design for genomic profiling approaches that use allele-specific detection directly from RNA transcripts.

Kinetics and thermodynamics of nick sealing by T4 DNA ligase

T4 DNA ligase is an Mg2+-dependent and ATP-dependent enzyme that seals DNA nicks in three steps: it covalently binds AMP, transadenylates the nick phosphate, and catalyses formation of the phosphodiester bond releasing AMP. In this kinetic study, we further detail the reaction mechanism, showing that the overall ligation reaction is a superimposition of two parallel processes: a 'processive' ligation, in which the enzyme transadenylates and seals the nick without dissociating from dsDNA, and a 'nonprocessive' ligation, in which the enzyme takes part in the abortive adenylation cycle (covalent binding of AMP, transadenylation of the nick, and dissociation). At low concentrations of ATP (<10 microM) and when the DNA nick is sealed with mismatching base pairs (e.g. five adjacent), this superimposition resolves into two kinetic phases, a burst ligation (approximately 0.2 min(-1)) and a subsequent slow ligation (approximately 2x10(-3) min(-1)). The relative rate and extent of each phase depend on the concentrations of ATP and Mg2+. The activation energies of self-adenylation (16.2 kcal.mol(-1)), transadenylation of the nick (0.9 kcal.mol(-1)), and nick-sealing (16.3-18.8 kcal.mol(-1)) were determined for several DNA substrates. The low activation energy of transadenylation implies that the transfer of AMP to the terminal DNA phosphate is a spontaneous reaction, and that the T4 DNA ligase-AMP complex is a high-energy intermediate. To summarize current findings in the DNA ligation field, we delineate a kinetic mechanism of T4 DNA ligase catalysis.

Dynamic mechanism of nick recognition by DNA ligase

DNA ligases are the enzymes responsible for the repair of single-stranded and double-stranded nicks in dsDNA. DNA ligases are structurally similar, possibly sharing a common molecular mechanism of nick recognition and ligation catalysis. This mechanism remains unclear, in part because the structure of ligase in complex with dsDNA has yet to be solved. DNA ligases share common structural elements with DNA polymerases, which have been cocrystallized with dsDNA. Based on the observed DNA polymerase-dsDNA interactions, we propose a mechanism for recognition of a single-stranded nick by DNA ligase. According to this mechanism, ligase induces a B-to-A DNA helix transition of the enzyme-bound dsDNA motif, which results in DNA contraction, bending and unwinding. For non-nicked dsDNA, this transition is reversible, leading to dissociation of the enzyme. For a nicked dsDNA substrate, the contraction of the enzyme-bound DNA motif (a) triggers an opened-closed conformational change of the enzyme, and (b) forces the motif to accommodate the strained A/B-form hybrid conformation, in which the nicked strand tends to retain a B-type helix, while the non-nicked strand tends to form a shortened A-type helix. We propose that this conformation is the catalytically competent transition state, which leads to the formation of the DNA-AMP intermediate and to the subsequent sealing of the nick.

Structural dependencies of h3JNC' scalar coupling in protein H-bond chains

The H-bond ((h3)J(NC')) and peptide bond ((1)J(NC')) scalar couplings establish connectivity of the electronic structure in the H-bond chains of proteins. The correlated changes of (h3)J(NC') and (1)J(NC') couplings extend over several peptide groups in the chains. Consequently, the electronic structure of the H-bond chains can affect (h3)J(NC') in a manner that is independent of the local H-bond geometry. By taking this into account, and by using a more complete set of H-bond geometry parameters, we have predicted (h3)J(NC') couplings in the H-bond chains with deviations commensurate to the standard deviations of the experimentally determined values. We have created a comprehensive database of (h3)J(NC') and (1)J(NC') couplings by measuring the coupling constants in ubiquitin (alphabeta-fold) intestinal fatty acid binding protein (beta-barrel) and carp parvalbumin (alpha-helical).