The mutational specificity of the Dbh lesion bypass polymerase and its implications

Dynamics and thermal stability of the bypass polymerase, DinB homolog (Dbh)

The DinB homolog polymerase (Dbh) is a member of the Y-family of translesion DNA polymerases that can synthesize using a damaged DNA template. Since Dbh comes from the thermophilic archaeon Sulfolobus acidocaldarius, it is capable of functioning over a wide range of temperatures. Existing X-ray structures were determined at temperatures where the protein is least active. Here we use NMR and circular dichroism to understand how the structure and dynamics of Dbh are affected by temperature (2°C-65°C) and metal ion binding in solution. We measured hydrogen exchange protection factors, temperature coefficients, and chemical shift perturbations with and without magnesium and manganese. We report on regions of the protein that become more dynamic as the temperature is increased toward the functional temperature. Hydrogen exchange protection factors and temperature coefficients reveal that both the thumb and finger domains are very dynamic relative to the palm and little-finger (LF) domains. These trends remain true at high temperature with dynamics increasing as temperatures increase from 35°C to 50°C. Notably, NMR spectra show that the Dbh tertiary structure cold denatures beginning at 25°C and increases in denaturation as the temperature is lowered to 5°C with little change observed by CD. Above 35°C, chemical shift perturbation analysis in the presence and absence of magnesium and manganese reveals three ion binding sites, without DNA bound. In contrast, these bound metals are not apparent in any Dbh crystal structures of the protein without DNA. Two ion binding sites are confirmed to be near the active site, as reported in other Y-family polymerases, and we report a novel ion binding site in the LF domain. Thus, the solution-state structure of the Dbh polymerase is distinct from that of the solid-state structures and shows an unusually high cold denaturation temperature.

Mechanism Underlying the Bypass of Apurinic/Pyrimidinic Site Analogs by Sulfolobus acidocaldarius DNA Polymerase IV

The spontaneous depurination of genomic DNA occurs frequently and generates apurinic/pyrimidinic (AP) site damage that is mutagenic or lethal to cells. Error-prone DNA polymerases are specifically responsible for the translesion synthesis (TLS) of specific DNA damage, such as AP site damage, generally with relatively low fidelity. The Y-family DNA polymerases are the main error-prone DNA polymerases, and they employ three mechanisms to perform TLS, including template-skipping, dNTP-stabilized misalignment, and misincorporation-misalignment. The bypass mechanism of the dinB homolog (Dbh), an archaeal Y-family DNA polymerase from Sulfolobus acidocaldarius, is unclear and needs to be confirmed. In this study, we show that the Dbh primarily uses template skipping accompanied by dNTP-stabilized misalignment to bypass AP site analogs, and the incorporation of the first nucleotide across the AP site is the most difficult. Furthermore, based on the reported crystal structures, we confirmed that three conserved residues (Y249, R333, and I295) in the little finger (LF) domain and residue K78 in the palm subdomain of the catalytic core domain are very important for TLS. These results deepen our understanding of how archaeal Y-family DNA polymerases deal with intracellular AP site damage and provide a biochemical basis for elucidating the intracellular function of these polymerases.

Haloferax volcanii-a model archaeon for studying DNA replication and repair

The tree of life shows the relationship between all organisms based on their common ancestry. Until 1977, it comprised two major branches: prokaryotes and eukaryotes. Work by Carl Woese and other microbiologists led to the recategorization of prokaryotes and the proposal of three primary domains: Eukarya, Bacteria and Archaea. Microbiological, genetic and biochemical techniques were then needed to study the third domain of life. Haloferax volcanii, a halophilic species belonging to the phylum Euryarchaeota, has provided many useful tools to study Archaea, including easy culturing methods, genetic manipulation and phenotypic screening. This review will focus on DNA replication and DNA repair pathways in H. volcanii, how this work has advanced our knowledge of archaeal cellular biology, and how it may deepen our understanding of bacterial and eukaryotic processes.

Heterotrimeric PCNA increases the activity and fidelity of Dbh, a Y-family translesion DNA polymerase prone to creating single-base deletion mutations

Dbh is a Y-family translesion DNA polymerase from Sulfolobus acidocaldarius, an archaeal species that grows in harsh environmental conditions. Biochemically, Dbh displays a distinctive mutational profile, creating single-base deletion mutations at extraordinarily high frequencies (up to 50 %) in specific repeat sequences. In cells, however, Dbh does not appear to contribute significantly to spontaneous frameshifts in these same sequence contexts. This suggests that either the error-prone DNA synthesis activity of Dbh is reduced in vivo and/or Dbh is restricted from replicating these sequences. Here, we test the hypothesis that the propensity for Dbh to make single base deletion mutations is reduced through interaction with the S. acidocaldarius heterotrimeric sliding clamp processivity factor, PCNA-123. We first confirm that Dbh physically interacts with PCNA-123, with the interaction requiring both the PCNA-1 subunit and the C-terminal 10 amino acids of Dbh, which contain a predicted PCNA-interaction peptide (PIP) motif. This interaction stimulates the polymerase activity of Dbh, even on short, linear primer-template DNA, by increasing the rate of nucleotide incorporation. This stimulation requires an intact PCNA-123 heterotrimer and a DNA duplex length of at least 18 basepairs, the minimal length predicted from structural data to bind to both the polymerase and the clamp. Finally, we find that PCNA-123 increases the fidelity of Dbh on a single-base deletion hotspot sequence 3-fold by promoting an increase in the rate of correct, but not incorrect, nucleotide addition and propose that PCNA-123 induces Dbh to adopt a more active conformation that is less prone to creating deletions during DNA synthesis.

Genetic Control of Oxidative Mutagenesis in Sulfolobus acidocaldarius

To identify DNA-oxidation defenses of hyperthermophilic archaea, we deleted genes encoding the putative 7,8-dihydro-8-oxoguanine (oxoG)-targeted N-glycosylase of S. acidocaldarius (ogg; Saci_01367), the Y-family DNA polymerase (dbh; Saci_0554), or both, and measured the effects on cellular survival, replication accuracy, and oxoG bypass in vivo Spontaneous G:C to T:A transversions were elevated in all Δogg and Δdbh constructs, and the Δogg Δdbh double mutant lost viability at a faster rate than isogenic WT and ogg strains. The distribution of G:C to T:A transversions within mutation-detector genes suggested that reactivity of G toward oxidation and the effect on translation contribute heavily to the pattern of mutations that are recovered. An impact of the Ogg protein on overall efficiency of bypassing oxoG in transforming DNA was evident only in the absence of Dbh, and Ogg status did not affect the accuracy of bypass. Dbh function, in contrast, dramatically influenced both the efficiency and accuracy of oxoG bypass. Thus, Ogg and Dbh were found to work independently to avoid mutagenesis by oxoG, and inactivating this simple but effective defense system by deleting both genes imposed a severe mutational burden on S. acidocaldarius cells.IMPORTANCE Hyperthermophilic archaea are expected to have effective (and perhaps atypical) mechanisms to limit the genetic consequences of DNA damage, but few gene products have been demonstrated to have genome-preserving functions in vivo This study confirmed by genetic criteria that the S. acidocaldarius Ogg protein avoids the characteristic mutagenesis of G oxidation. This enzyme and the bypass polymerase Dbh have similar impacts on genome stability but work independently, and may comprise most of the DNA-oxidation defense of S. acidocaldarius The critical dependence of accurate oxoG bypass on the accessory DNA polymerase Dbh further argues that some form of polymerase exchange is important for accurate genome replication in Sulfolobus, and perhaps in related hyperthermophilic archaea.

Structural basis of transcriptional stalling and bypass of abasic DNA lesion by RNA polymerase II

Abasic sites are among the most abundant DNA lesions and interfere with DNA replication and transcription, but the mechanism of their action on transcription remains unknown. Here we applied a combined structural and biochemical approach for a comprehensive investigation of how RNA polymerase II (Pol II) processes an abasic site, leading to slow bypass of lesion. Encounter of Pol II with an abasic site involves two consecutive slow steps: insertion of adenine opposite a noninstructive abasic site (the A-rule), followed by extension of the 3'-rAMP with the next cognate nucleotide. Further studies provided structural insights into the A-rule: ATP is slowly incorporated into RNA in the absence of template guidance. Our structure revealed that ATP is bound to the Pol II active site, whereas the abasic site is located at an intermediate state above the Bridge Helix, a conserved structural motif that is cirtical for Pol II activity. The next extension step occurs in a template-dependent manner where a cognate substrate is incorporated, despite at a much slower rate compared with nondamaged template. During the extension step, neither the cognate substrate nor the template base is located at the canonical position, providing a structural explanation as to why this step is as slow as the insertion step. Taken together, our studies provide a comprehensive understanding of Pol II stalling and bypass of the abasic site in the DNA template.

(1)H, (13)C, and (15)N backbone resonance assignments of the full-length 40 kDa S. acidocaldarius Y-family DNA polymerase, dinB homolog

The dinB homolog (Dbh) is a member of the Y-family of translesion DNA polymerases, which are specialized to accurately replicate DNA across from a wide variety of lesions in living cells. Lesioned bases block the progression of high-fidelity polymerases and cause detrimental replication fork stalling; Y-family polymerases can bypass these lesions. The active site of the translesion synthesis polymerase is more open than that of a replicative polymerase; consequently Dbh polymerizes with low fidelity. Bypass polymerases also have low processivity. Short extension past the lesion allows the high-fidelity polymerase to switch back onto the site of replication. Dbh and the other Y-family polymerases have been used as structural models to investigate the mechanisms of DNA polymerization and lesion bypass. Many high-resolution crystal structures of Y-family polymerases have been reported. NMR dynamics studies can complement these structures by providing a measure of protein motions. Here we report the (15)N, (1)H, and (13)C backbone resonance assignments at two temperatures (35 and 50 °C) for Sulfolobus acidocaldarius Dbh polymerase. Backbone resonance assignments have been obtained for 86 % of the residues. The polymerase active site is assigned as well as the majority of residues in each of the four domains.

Lesion-Induced Mutation in the Hyperthermophilic Archaeon Sulfolobus acidocaldarius and Its Avoidance by the Y-Family DNA Polymerase Dbh

Hyperthermophilic archaea offer certain advantages as models of genome replication, and Sulfolobus Y-family polymerases Dpo4 (S. solfataricus) and Dbh (S. acidocaldarius) have been studied intensively in vitro as biochemical and structural models of trans-lesion DNA synthesis (TLS). However, the genetic functions of these enzymes have not been determined in the native context of living cells. We developed the first quantitative genetic assays of replication past defined DNA lesions and error-prone motifs in Sulfolobus chromosomes and used them to measure the efficiency and accuracy of bypass in normal and dbh(-) strains of Sulfolobus acidocaldarius. Oligonucleotide-mediated transformation allowed low levels of abasic-site bypass to be observed in S. acidocaldarius and demonstrated that the local sequence context affected bypass specificity; in addition, most erroneous TLS did not require Dbh function. Applying the technique to another common lesion, 7,8-dihydro-8-oxo-deoxyguanosine (8-oxo-dG), revealed an antimutagenic role of Dbh. The efficiency and accuracy of replication past 8-oxo-dG was higher in the presence of Dbh, and up to 90% of the Dbh-dependent events inserted dC. A third set of assays, based on phenotypic reversion, showed no effect of Dbh function on spontaneous -1 frameshifts in mononucleotide tracts in vivo, despite the extremely frequent slippage at these motifs documented in vitro. Taken together, the results indicate that a primary genetic role of Dbh is to avoid mutations at 8-oxo-dG that occur when other Sulfolobus enzymes replicate past this lesion. The genetic evidence that Dbh is recruited to 8-oxo-dG raises questions regarding the mechanism of recruitment, since Sulfolobus spp. have eukaryotic-like replisomes but no ubiquitin.

Understanding DNA Repair in Hyperthermophilic Archaea: Persistent Gaps and Other Reasons to Focus on the Fork

Although hyperthermophilic archaea arguably have a great need for efficient DNA repair, they lack members of several DNA repair protein families broadly conserved among bacteria and eukaryotes. Conversely, the putative DNA repair genes that do occur in these archaea often do not generate the expected phenotype when deleted. The prospect that hyperthermophilic archaea have some unique strategies for coping with DNA damage and replication errors has intellectual and technological appeal, but resolving this question will require alternative coping mechanisms to be proposed and tested experimentally. This review evaluates a combination of four enigmatic properties that distinguishes the hyperthermophilic archaea from all other organisms: DNA polymerase stalling at dU, apparent lack of conventional NER, lack of MutSL homologs, and apparent essentiality of homologous recombination proteins. Hypothetical damage-coping strategies that could explain this set of properties may provide new starting points for efforts to define how archaea differ from conventional models of DNA repair and replication fidelity.

An underlying mechanism for the increased mutagenesis of lagging-strand genes in Bacillus subtilis

We previously reported that lagging-strand genes accumulate mutations faster than those encoded on the leading strand in Bacillus subtilis. Although we proposed that orientation-specific encounters between replication and transcription underlie this phenomenon, the mechanism leading to the increased mutagenesis of lagging-strand genes remained unknown. Here, we report that the transcription-dependent and orientation-specific differences in mutation rates of genes require the B. subtilis Y-family polymerase, PolY1 (yqjH). We find that without PolY1, association of the replicative helicase, DnaC, and the recombination protein, RecA, with lagging-strand genes increases in a transcription-dependent manner. These data suggest that PolY1 promotes efficient replisome progression through lagging-strand genes, thereby reducing potentially detrimental breaks and single-stranded DNA at these loci. Y-family polymerases can alleviate potential obstacles to replisome progression by facilitating DNA lesion bypass, extension of D-loops, or excision repair. We find that the nucleotide excision repair (NER) proteins UvrA, UvrB, and UvrC, but not RecA, are required for transcription-dependent asymmetry in mutation rates of genes in the two orientations. Furthermore, we find that the transcription-coupling repair factor Mfd functions in the same pathway as PolY1 and is also required for increased mutagenesis of lagging-strand genes. Experimental and SNP analyses of B. subtilis genomes show mutational footprints consistent with these findings. We propose that the interplay between replication and transcription increases lesion susceptibility of, specifically, lagging-strand genes, activating an Mfd-dependent error-prone NER mechanism. We propose that this process, at least partially, underlies the accelerated evolution of lagging-strand genes.

Cytosine unstacking and strand slippage at an insertion-deletion mutation sequence in an overhang-containing DNA duplex

Base unstacking in template strands, when accompanied by strand slippage, can result in deletion mutations during strand extension by nucleic acid polymerases. In a GCCC mutation hot-spot sequence, which was previously identified to have a 50% probability of causing such mutations during DNA replication by a Y-family polymerase, a single-base deletion mutation could result from such unstacking of any one of its three template cytosines. In this study, the intrinsic energetic differences in unstacking among these three cytosines in a solvated DNA duplex overhang model were examined using umbrella sampling molecular dynamics simulations. The free energy profiles obtained show that cytosine unstacking grows progressively more unfavorable as one moves inside the duplex from the 5′-end of the overhang template strand. Spontaneous strand slippage occurs in response to such base unstacking in the direction of both the major and minor grooves for all three cytosines. Unrestrained simulations run from three distinct strand-slipped states and one non-strand-slipped state suggest that a more duplexlike environment can help stabilize strand slippage. The possible underlying reasons and biological implications of these observations are discussed in the context of nucleic acid replication active site dynamics.

Three residues of the interdomain linker determine the conformation and single-base deletion fidelity of Y-family translesion polymerases

Dpo4 and Dbh are from two closely related Sulfolobus species and are well studied archaeal homologues of pol IV, an error prone Y-family polymerase from Escherichia coli. Despite sharing 54% amino acid identity, these polymerases display distinct mutagenic and translesion specificities. Structurally, Dpo4 and Dbh adopt different conformations because of the difference in relative orientation of their N-terminal catalytic and C-terminal DNA binding domains. Using chimeric constructs of these two polymerases, we have previously demonstrated that the interdomain linker is a major determinant of polymerase conformation, base-substitution fidelity, and abasic-site translesion synthesis. Here we find that the interdomain linker also affects the single-base deletion frequency and the mispair extension efficiency of these polymerases. Exchanging just three amino acids in the linkers of Dbh and Dpo4 is sufficient to change the fidelity by up to 30-fold, predominantly by altering the rate of correct (but not incorrect) nucleotide incorporation. Additionally, from a 2.4 Å resolution crystal structure, we have found that the three linker amino acids from Dpo4 are sufficient to allow Dbh to adopt the standard conformation of Dpo4. Thus, a small region of the interdomain linker, located more than 11 Å away from the catalytic residues, determines the fidelity of these Y-family polymerases, by controlling the alignment of substrates at the active site.

Analyzing the relationship between single base flipping and strand slippage near DNA duplex termini

Insertion-deletion (indel) mutations are caused by strand slippage between pairing primer and template strands during nucleic acid strand extension. A possible causative factor for such strand slippage is base flipping in the primer strand or template strand, for insertion or deletion mutations, respectively. A simple mechanistic description is that the "hole" in the nucleic acid duplex left behind by a flipping base is occupied by a neighboring base on the same strand, resulting in slippage with respect to its paired strand. The extent of single base flipping required for occupation of its former place in the double helix by a neighboring base is not fully understood. The present study uses restrained molecular dynamics (MD) simulations along a pseudohedihedral base flipping parameter to construct two-dimensional free energy profiles along base flipping and strand slippage geometric parameters. These profiles, generated for both cytosine and guanine single base flipping in a short repetitive indel mutation hot-spot DNA sequence, illustrate the extent of single base flipping that can allow strand slippage by one base position. Relatively minor base flipping into both the major and minor grooves can result in strand slippage. Deconstruction of the collective variable strand slippage geometric parameter into its component distances illustrates the details of how strand slippage can accompany base flipping. The trans Watson-Crick:sugar edge interaction that stabilizes cytosine flipping in this hot-spot sequence is also characterized energetically. The impact of these results on understanding sequence dependence of indel errors in nucleic acid strand extension is discussed, along with a suggestion for future studies that can generalize the present findings to all nearest-neighbor sequence contexts.

Partial base flipping is sufficient for strand slippage near DNA duplex termini

Strand slippage is a structural mechanism by which insertion-deletion (indel) mutations are introduced during replication by polymerases. Three-dimensional atomic-resolution structural pathways are still not known for the decades-old template slippage description. The dynamic nature of the process and the higher energy intermediates involved increase the difficulty of studying these processes experimentally. In the present study, restrained and unrestrained molecular dynamics simulations, carried out using multiple nucleic acid force fields, are used to demonstrate that partial base-flipping can be sufficient for strand slippage at DNA duplex termini. Such strand slippage can occur in either strand, i.e. near either the 3' or the 5' terminus of a DNA strand, which suggests that similar structural flipping mechanisms can cause both primer and template slippage. In the repetitive mutation hot-spot sequence studied, non-canonical base-pairing with exposed DNA groove atoms of a neighboring G:C base-pair stabilizes a partially flipped state of the cytosine. For its base-pair partner guanine, a similar partially flipped metastable intermediate was not detected, and the propensity for sustained slippage was also found to be lower. This illustrates that a relatively small metastable DNA structural distortion in polymerase active sites could allow single base insertion or deletion mutations to occur, and stringent DNA groove molecular recognition may be required to maintain intrinsic DNA polymerase fidelity. The implications of a close relationship between base-pair dissociation, base unstacking, and strand slippage are discussed in the context of sequence dependence of indel mutations.

Human polymerase kappa uses a template-slippage deletion mechanism, but can realign the slipped strands to favour base substitution mutations over deletions

Polymerases belonging to the DinB class of the Y-family translesion synthesis DNA polymerases have a preference for accurately and efficiently bypassing damaged guanosines. These DinB polymerases also generate single-base (-1) deletions at high frequencies with most occurring on repetitive 'deletion hotspot' sequences. Human DNA polymerase kappa (hPolκ), the eukaryotic DinB homologue, displays an unusual efficiency for to extend from mispaired primer termini, either by extending directly from the mispair or by primer-template misalignment. This latter property explains how hPolκ creates single-base deletions in non-repetitive sequences, but does not address how deletions occur in repetitive deletion hotspots. Here, we show that hPolκ uses a classical Streisinger template-slippage mechanism to generate -1 deletions in repetitive sequences, as do the bacterial and archaeal homologues. After the first nucleotide is added by template slippage, however, hPolκ can efficiently realign the primer-template duplex before continuing DNA synthesis. Strand realignment results in a base-substitution mutation, minimizing generation of more deleterious frameshift mutations. On non-repetitive sequences, we find that nucleotide misincorporation is slower if the incoming nucleotide can correctly basepair with the nucleotide immediately 5' to the templating base, thereby competing against the mispairing with the templating base.

Roles of the Y-family DNA polymerase Dbh in accurate replication of the Sulfolobus genome at high temperature

The intrinsically thermostable Y-family DNA polymerases of Sulfolobus spp. have revealed detailed three-dimensional structure and catalytic mechanisms of trans-lesion DNA polymerases, yet their functions in maintaining their native genomes remain largely unexplored. To identify functions of the Y-family DNA polymerase Dbh in replicating the Sulfolobus genome under extreme conditions, we disrupted the dbh gene in Sulfolobus acidocaldarius and characterized the resulting mutant strains phenotypically. Disruption of dbh did not cause any obvious growth defect, sensitivity to any of several DNA-damaging agents, or change in overall rate of spontaneous mutation at a well-characterized target gene. Loss of dbh did, however, cause significant changes in the spectrum of spontaneous forward mutation in each of two orthologous target genes of different sequence. Relative to wild-type strains, dbh(-) constructs exhibited fewer frame-shift and other small insertion-deletion mutations, but exhibited more base-pair substitutions that converted G:C base pairs to T:A base pairs. These changes, which were confirmed to be statistically significant, indicate two distinct activities of the Dbh polymerase in Sulfolobus cells growing under nearly optimal culture conditions (78-80°C and pH 3). The first activity promotes slipped-strand events within simple repetitive motifs, such as mononucleotide runs or triplet repeats, and the second promotes insertion of C opposite a potentially miscoding form of G, thereby avoiding G:C to T:A transversions.

Chemistry and structural biology of DNA damage and biological consequences

The formation of adducts by the reaction of chemicals with DNA is a critical step for the initiation of carcinogenesis. The structural analysis of various DNA adducts reveals that conformational and chemical rearrangements and interconversions are a common theme. Conformational changes are modulated both by the nature of adduct and the base sequences neighboring the lesion sites. Equilibria between conformational states may modulate both DNA repair and error-prone replication past these adducts. Likewise, chemical rearrangements of initially formed DNA adducts are also modulated both by the nature of adducts and the base sequences neighboring the lesion sites. In this review, we focus on DNA damage caused by a number of environmental and endogenous agents, and biological consequences.

A nucleotide binding rectification Brownian ratchet model for translocation of Y-family DNA polymerases

Y-family DNA polymerases are characterized by low-fidelity synthesis on undamaged DNA and ability to catalyze translesion synthesis over the damaged DNA. Their translocation along the DNA template is an important event during processive DNA synthesis. In this work we present a Brownian ratchet model for this translocation, where the directed translocation is rectified by the nucleotide binding to the polymerase. Using the model, different features of the available structures for Dpo4, Dbh and polymerase ι in binary and ternary forms can be easily explained. Other dynamic properties of the Y-family polymerases such as the fast translocation event upon dNTP binding for Dpo4 and the considerable variations of the processivity among the polymerases can also be well explained by using the model. In addition, some predicted results of the DNA synthesis rate versus the external force acting on Dpo4 and Dbh polymerases are presented. Moreover, we compare the effect of the external force on the DNA synthesis rate of the Y-family polymerase with that of the replicative DNA polymerase.

The Y-family DNA polymerase Dpo4 uses a template slippage mechanism to create single-base deletions

The Y-family polymerases help cells tolerate DNA damage by performing translesion synthesis, yet they also can be highly error prone. One distinctive feature of the DinB class of Y-family polymerases is that they make single-base deletion errors at high frequencies in repetitive sequences, especially those that contain two or more identical pyrimidines with a 5' flanking guanosine. Intriguingly, different deletion mechanisms have been proposed, even for two archaeal DinB polymerases that share 54% sequence identity and originate from two strains of Sulfolobus. To reconcile these apparent differences, we have characterized Dpo4 from Sulfolobus solfataricus using the same biochemical and crystallographic approaches that we have used previously to characterize Dbh from Sulfolobus acidocaldarius. In contrast to previous suggestions that Dpo4 uses a deoxynucleoside triphosphate (dNTP)-stabilized misalignment mechanism when creating single-base deletions, we find that Dpo4 predominantly uses a template slippage deletion mechanism when replicating repetitive DNA sequences, as was previously shown for Dbh. Dpo4 stabilizes the skipped template base in an extrahelical conformation between the polymerase and the little-finger domains of the enzyme. This contrasts with Dbh, in which the extrahelical base is stabilized against the surface of the little-finger domain alone. Thus, despite sharing a common deletion mechanism, these closely related polymerases use different contacts with the substrate to accomplish the same result.

Pre-Steady-State Kinetic Analysis of Truncated and Full-Length Saccharomyces cerevisiae DNA Polymerase Eta

Understanding polymerase fidelity is an important objective towards ascertaining the overall stability of an organism's genome. Saccharomyces cerevisiae DNA polymerase η (yPolη), a Y-family DNA polymerase, is known to efficiently bypass DNA lesions (e.g., pyrimidine dimers) in vivo. Using pre-steady-state kinetic methods, we examined both full-length and a truncated version of yPolη which contains only the polymerase domain. In the absence of yPolη's C-terminal residues 514–632, the DNA binding affinity was weakened by 2-fold and the base substitution fidelity dropped by 3-fold. Thus, the C-terminus of yPolη may interact with DNA and slightly alter the conformation of the polymerase domain during catalysis. In general, yPolη discriminated between a correct and incorrect nucleotide more during the incorporation step (50-fold on average) than the ground-state binding step (18-fold on average). Blunt-end additions of dATP or pyrene nucleotide 5′-triphosphate revealed the importance of base stacking during the binding of incorrect incoming nucleotides.

UmuD(2) inhibits a non-covalent step during DinB-mediated template slippage on homopolymeric nucleotide runs

Escherichia coli DinB (DNA polymerase IV) possesses an enzyme architecture resulting in specialized lesion bypass function and the potential for creating -1 frameshifts in homopolymeric nucleotide runs. We have previously shown that the mutagenic potential of DinB is regulated by the DNA damage response protein UmuD(2). In the current study, we employ a pre-steady-state fluorescence approach to gain a mechanistic understanding of DinB regulation by UmuD(2). Our results suggest that DinB, like its mammalian and archaeal orthologs, uses a template slippage mechanism to create single base deletions on homopolymeric runs. With 2-aminopurine as a fluorescent reporter in the DNA substrate, the template slippage reaction results in a prechemistry fluorescence change that is inhibited by UmuD(2). We propose a model in which DNA templates containing homopolymeric nucleotide runs, when bound to DinB, are in an equilibrium between non-slipped and slipped conformations. UmuD(2), when bound to DinB, displaces the equilibrium in favor of the non-slipped conformation, thereby preventing frameshifting and potentially enhancing DinB activity on non-slipped substrates.

Structural diversity of the Y-family DNA polymerases

The Y-family translesion DNA polymerases enable cells to tolerate many forms of DNA damage, yet these enzymes have the potential to create genetic mutations at high rates. Although this polymerase family was defined less than a decade ago, more than 90 structures have already been determined so far. These structures show that the individual family members bypass damage and replicate DNA with either error-free or mutagenic outcomes, depending on the polymerase, the lesion and the sequence context. Here, these structures are reviewed and implications for polymerase function are discussed.

Molecular analyses of an unusual translesion DNA polymerase from Methanosarcina acetivorans C2A

The domain Archaea is composed of several subdomains, and prominent among them are the Crenarchaeota and the Euryarchaeota. Biochemically characterized archaeal family Y DNA polymerases (Pols) or DinB homologs, to date, are all from crenarchaeal organisms, especially the genus Sulfolobus. Here, we demonstrate that archaeal family Y Pols fall into five clusters based on phylogenetic analysis. MacDinB-1, the homolog from the euryarchaeon Methanosarcina acetivorans that is characterized in this study, belongs to cluster II. Therefore, MacDinB-1 is different from the Sulfolobus DinB proteins, which are members of cluster I. In addition to translesion DNA synthesis activity, MacDinB-1 synthesized unusually long products ( approximately 7.2 kb) in the presence of its cognate proliferating cell nuclear antigen (PCNA). The PCNA-interacting site in MacDinB-1 was identified by mutational analysis in a C-terminally located heptapeptide akin to a PIP (PCNA-interacting protein) box. In vitro assays from the present report suggested that MacDinB-1 works in an error-free mode to repair cyclobutane pyrimidine dimers. This study on a euryarchaeal DinB homolog provides important insights into the functional diversity of the family Y Pols, and the availability of a genetic system for this archaeon should allow subsequent elucidation of the physiological significance of this enzyme in M. acetivorans cells.

Separate roles of structured and unstructured regions of Y-family DNA polymerases

All organisms have multiple DNA polymerases specialized for translesion DNA synthesis (TLS) on damaged DNA templates. Mammalian TLS DNA polymerases include Pol eta, Pol iota, Pol kappa, and Rev1 (all classified as "Y-family" members) and Pol zeta (a "B-family" member). Y-family DNA polymerases have highly structured catalytic domains; however, some of these proteins adopt different structures when bound to DNA (such as archaeal Dpo4 and human Pol kappa), while others maintain similar structures independently of DNA binding (such as archaeal Dbh and Saccharomyces cerevisiae Pol eta). DNA binding-induced structural conversions of TLS polymerases depend on flexible regions present within the catalytic domains. In contrast, noncatalytic regions of Y-family proteins, which contain multiple domains and motifs for interactions with other proteins, are predicted to be mostly unstructured, except for short regions corresponding to ubiquitin-binding domains. In this review we discuss how the organization of structured and unstructured regions in TLS polymerases is relevant to their regulation and function during lesion bypass.

Frameshift deletion by Sulfolobus solfataricus P2 DNA polymerase Dpo4 T239W is selective for purines and involves normal conformational change followed by slow phosphodiester bond formation

The human DNA polymerase kappa homolog Sulfolobus solfataricus DNA polymerase IV (Dpo4) produces "-1" frameshift deletions while copying unmodified DNA and, more frequently, when bypassing DNA adducts. As judged by steady-state kinetics and mass spectrometry, bypass of purine template bases to produce these deletions occurred rarely but with 10-fold higher frequency than with pyrimidines. The DNA adduct 1,N(2)-etheno-2'-deoxyguanosine, with a larger stacking surface than canonical purines, showed the highest frequency of formation of -1 frameshift deletions. Dpo4 T239W, a mutant we had previously shown to produce fluorescence changes attributed to conformational change following dNTP binding opposite cognate bases (Beckman, J. W., Wang, Q., and Guengerich, F. P. (2008) J. Biol. Chem. 283, 36711-36723), reported similar conformational changes when the incoming dNTP complemented the base following a templating purine base or bulky adduct (i.e. the "+1" base). However, in all mispairing cases, phosphodiester bond formation was inefficient. The frequency of -1 frameshift events and the associated conformational changes were not dependent on the context of the remainder of the sequence. Collectively, our results support a mechanism for -1 frameshift deletions by Dpo4 that involves formation of active complexes via a favorable conformational change that skips the templating base, without causing slippage or flipping out of the base, to incorporate a complementary residue opposite the +1 base, in a mechanism previously termed "dNTP-stabilized incorporation." The driving force is attributed to be the stacking potential between the templating base and the incoming dNTP base.

Structural and functional elucidation of the mechanism promoting error-prone synthesis by human DNA polymerase kappa opposite the 7,8-dihydro-8-oxo-2'-deoxyguanosine adduct

Human polymerase kappa (hPol kappa) is one of four eukaryotic Y-class DNA polymerases and may be an important element in the cellular response to polycyclic aromatic hydrocarbons such as benzo[a]pyrene, which can lead to reactive oxygenated metabolite-mediated oxidative stress. Here, we present a detailed analysis of the activity and specificity of hPol kappa bypass opposite the major oxidative adduct 7,8-dihydro-8-oxo-2'-deoxyguanosine (8-oxoG). Unlike its archaeal homolog Dpo4, hPol kappa bypasses this lesion in an error-prone fashion by inserting mainly dATP. Analysis of transient-state kinetics shows diminished "bursts" for dATP:8-oxoG and dCTP:8-oxoG incorporation, indicative of non-productive complex formation, but dATP:8-oxoG insertion events that do occur are 2-fold more efficient than dCTP:G insertion events. Crystal structures of ternary hPol kappa complexes with adducted template-primer DNA reveal non-productive (dGTP and dATP) alignments of incoming nucleotide and 8-oxoG. Structural limitations placed upon the hPol kappa by interactions between the N-clasp and finger domains combined with stabilization of the syn-oriented template 8-oxoG through the side chain of Met-135 both appear to contribute to error-prone bypass. Mutating Leu-508 in the little finger domain of hPol kappa to lysine modulates the insertion opposite 8-oxoG toward more accurate bypass, similar to previous findings with Dpo4. Our structural and activity data provide insight into important mechanistic aspects of error-prone bypass of 8-oxoG by hPol kappa compared with accurate and efficient bypass of the lesion by Dpo4 and polymerase eta.

Eukaryotic translesion polymerases and their roles and regulation in DNA damage tolerance

DNA repair and DNA damage tolerance machineries are crucial to overcome the vast array of DNA damage that a cell encounters during its lifetime. In this review, we summarize the current state of knowledge about the eukaryotic DNA damage tolerance pathway translesion synthesis (TLS), a process in which specialized DNA polymerases replicate across from DNA lesions. TLS aids in resistance to DNA damage, presumably by restarting stalled replication forks or filling in gaps that remain in the genome due to the presence of DNA lesions. One consequence of this process is the potential risk of introducing mutations. Given the role of these translesion polymerases in mutagenesis, we discuss the significant regulatory mechanisms that control the five known eukaryotic translesion polymerases: Rev1, Pol zeta, Pol kappa, Pol eta, and Pol iota.

Varied active-site constraints in the klenow fragment of E. coli DNA polymerase I and the lesion-bypass Dbh DNA polymerase

We report on comparative pre-steady-state kinetic analyses of exonuclease-deficient Escherichia coli DNA polymerase I (Klenow fragment, KF-) and the archaeal Y-family DinB homologue (Dbh) of Sulfolobus solfataricus. We used size-augmented sugar-modified thymidine-5'-triphosphate (T(R)TP) analogues to test the effects of steric constraints in the active sites of the polymerases. These nucleotides serve as models for study of DNA polymerases exhibiting both relatively high and low intrinsic selectivity. Substitution of a hydrogen atom at the 4'-position in the nucleotide analogue by a methyl group reduces the maximum rate of nucleotide incorporation by about 40-fold for KF- and about twelve fold for Dbh. Increasing the size to an ethyl group leads to a further twofold reduction in the rates of incorporation for both enzymes. Interestingly, the affinity of KF- for the modified nucleotides is only marginally affected, which would indicate no discrimination during the binding step. Dbh even has a higher affinity for the modified analogues than it does for the natural substrate. Misincorporation of either TTP or T(Me)TP opposite a G template causes a drastic decline in incorporation rates for both enzymes. At the same time, the binding affinities of KF- for these nucleotides drop by about 16- and fourfold, respectively, whereas Dbh shows only a twofold reduction. Available structural data for ternary complexes of relevant DNA polymerases indicate that both enzymes make close contacts with the sugar moiety of the dNTP. Thus, the varied proficiencies of the two enzymes in processing the size-augmented probes indicate varied flexibility of the enzymes' active sites and support the notion of active site tightness being a criterion for DNA polymerase selectivity.

Formation of purine-purine mispairs by Sulfolobus solfataricus DNA polymerase IV

DNA damage that stalls replicative polymerases can be bypassed with the Y-family polymerases. These polymerases have more open active sites that can accommodate modified nucleotides. The lack of protein-DNA interactions that select for Watson-Crick base pairs correlate with the lowered fidelity of replication. Interstrand hydrogen bonds appear to play a larger role in dNTP selectivity. The mechanism by which purine-purine mispairs are formed and extended was examined with Solfolobus solfataricus DNA polymerase IV, a member of the RAD30A subfamily of the Y-family polymerases, as is pol eta. The structures of the purine-purine mispairs were examined by comparing the kinetics of mispair formation with adenine versus 1-deaza- and 7-deazaadenine and guanine versus 7-deazaguanine at four positions in the DNA, the incoming dNTP, the template base, and both positions of the terminal base pair. The time course of insertion of a single dNTP was examined with a polymerase concentration of 50 nM and a DNA concentration of 25 nM with various concentrations of dNTP. The time courses were fitted to a first-order equation, and the first-order rate constants were plotted against the dNTP concentration to produce k pol and K d (dNTP) values. A decrease in k pol/ K d (dNTP) associated with the deazapurine substitution would indicate that the position is involved in a crucial hydrogen bond. During correct base pair formation, the adenine to 1-deazaadenine substitution in both the incoming dNTP and template base resulted in a >1000-fold decrease in k pol/ K d (dNTP), indicating that interstrand hydrogen bonds are important in correcting base pair formation. During formation of purine-purine mispairs, the k pol/ K d (dNTP) values for the insertion of dATP and dGTP opposite 7-deazaadenine and 7-deazaguanine were decreased >10-fold with respect to those of the unmodified nucleotides. In addition, the rate of incorporation of 1-deaza-dATP opposite guanine was decreased 5-fold. These results suggest that during mispair formation the newly forming base pair is in a Hoogsteen geometry with the incoming dNTP in the anti conformation and the template base in the syn conformation. These results indicate that Dpo4 holds the incoming dNTP in the normal anti conformation while allowing the template nucleotide to change conformations to allow reaction to occur. This result may be functionally relevant in the replication of damaged DNA in that the polymerase may allow the template to adopt multiple configurations.

Structural insights into the generation of single-base deletions by the Y family DNA polymerase dbh

Dbh is a Y family translesion DNA polymerase that accurately bypasses some damaged forms of deoxyguanosine, but also generates single-base deletion errors at frequencies of up to 50%, in specific hot spot sequences. We describe preinsertion binary, insertion ternary, and postinsertion binary crystal structures of Dbh synthesizing DNA after making a single-base deletion. The skipped template base adopts an extrahelical conformation stabilized by interactions with the C-terminal domain of the enzyme. DNA translocation and positioning of the next templating base at the active site, with space opposite to accommodate incoming nucleotide, occur independently of nucleotide binding, incorporation, and pyrophosphate release. We also show that Dbh creates single-base deletions more rapidly when the skipped base is located two or three bases upstream of the nascent base pair than when it is directly adjacent to the templating base, indicating that Dbh predominantly creates single-base deletions by template slippage rather than by dNTP-stabilized misalignment.

Substrate-induced DNA strand misalignment during catalytic cycling by DNA polymerase lambda

The simple deletion of nucleotides is common in many organisms. It can be advantageous when it activates genes beneficial to microbial survival in adverse environments, and deleterious when it mutates genes relevant to survival, cancer or degenerative diseases. The classical idea is that simple deletions arise by strand slippage. A prime opportunity for slippage occurs during DNA synthesis, but it remains unclear how slippage is controlled during a polymerization cycle. Here, we report crystal structures and molecular dynamics simulations of mutant derivatives of DNA polymerase λ bound to a primer–template during strand slippage. Relative to the primer strand, the template strand is in multiple conformations, indicating intermediates on the pathway to deletion mutagenesis. Consistent with these intermediates, the mutant polymerases generate single-base deletions at high rates. The results indicate that dNTP-induced template strand repositioning during conformational rearrangements in the catalytic cycle is crucial to controlling the rate of strand slippage.

Mechanistic consequences of temperature on DNA polymerization catalyzed by a Y-family DNA polymerase

Our previous publication shows that Sulfolobus solfataricus Dpo4 utilizes an ‘induced-fit’ mechanism to select correct incoming nucleotides at 37°C. Here, we provide a comprehensive report elucidating the kinetic mechanism of a DNA polymerase at a reaction temperature higher than 37°C in an attempt to determine the effect of temperature on enzyme fidelity and mechanism. The fidelity of Dpo4 did not change considerably with a 30°C increase in reaction temperature, suggesting that the fidelity of Dpo4 at 80°C is similar to that determined here at 56°C. Amazingly, the incorporation rate for correct nucleotides increased by 18 900-fold from 2°C to 56°C, similar in magnitude to that observed for incorrect nucleotides, thus not perturbing fidelity. Three independent lines of kinetic evidence indicate that a protein conformational change limits correct nucleotide incorporations at 56°C. Furthermore, the activation energy for the incorporation of a correct nucleotide was determined to be 32.9 kcal/mol, a value considerably larger than those values estimated for a rate-limiting chemistry step, providing a fourth line of evidence to further substantiate this conclusion. These results herein provide evidence that Dpo4 utilizes the ‘induced-fit’ mechanism to select a correct nucleotide at all temperatures.

UmuD and RecA directly modulate the mutagenic potential of the Y family DNA polymerase DinB

DinB is the only translesion Y family DNA polymerase conserved among bacteria, archaea, and eukaryotes. DinB and its orthologs possess a specialized lesion bypass function but also display potentially deleterious -1 frameshift mutagenic phenotypes when overproduced. We show that the DNA damage-inducible proteins UmuD(2) and RecA act in concert to modulate this mutagenic activity. Structural modeling suggests that the relatively open active site of DinB is enclosed by interaction with these proteins, thereby preventing the template bulging responsible for -1 frameshift mutagenesis. Intriguingly, residues that define the UmuD(2)-interacting surface on DinB statistically covary throughout evolution, suggesting a driving force for the maintenance of a regulatory protein-protein interaction at this site. Together, these observations indicate that proteins like RecA and UmuD(2) may be responsible for managing the mutagenic potential of DinB orthologs throughout evolution.

DNA oligonucleotides with A, T, G or C opposite an abasic site: structure and dynamics

Abasic sites are common DNA lesions resulting from spontaneous depurination and excision of damaged nucleobases by DNA repair enzymes. However, the influence of the local sequence context on the structure of the abasic site and ultimately, its recognition and repair, remains elusive. In the present study, duplex DNAs with three different bases (G, C or T) opposite an abasic site have been synthesized in the same sequence context (5′-CCA AAG₆ XA₈C CGG G-3′, where X denotes the abasic site) and characterized by 2D NMR spectroscopy. Studies on a duplex DNA with an A opposite the abasic site in the same sequence has recently been reported [Chen,J., Dupradeau,F.-Y., Case,D.A., Turner,C.J. and Stubbe,J. (2007) Nuclear magnetic resonance structural studies and molecular modeling of duplex DNA containing normal and 4′-oxidized abasic sites. Biochemistry, 46, 3096–3107]. Molecular modeling based on NMR-derived distance and dihedral angle restraints and molecular dynamics calculations have been applied to determine structural models and conformational flexibility of each duplex. The results indicate that all four duplexes adopt an overall B-form conformation with each unpaired base stacked between adjacent bases intrahelically. The conformation around the abasic site is more perturbed when the base opposite to the lesion is a pyrimidine (C or T) than a purine (G or A). In both the former cases, the neighboring base pairs (G6-C21 and A8-T19) are closer to each other than those in B-form DNA. Molecular dynamics simulations reveal that transient H-bond interactions between the unpaired pyrimidine (C20 or T20) and the base 3′ to the abasic site play an important role in perturbing the local conformation. These results provide structural insight into the dynamics of abasic sites that are intrinsically modulated by the bases opposite the abasic site.

Conformational changes during normal and error-prone incorporation of nucleotides by a Y-family DNA polymerase detected by 2-aminopurine fluorescence

Y-family polymerases are specialized to carry out DNA synthesis past sites of DNA damage. Their active sites make fewer contacts to their substrates, consistent with the remarkably low fidelity of these DNA polymerases when copying undamaged DNA. We have used DNA containing the fluorescent reporter 2-aminopurine (2-AP) to study the reaction pathway of the Y-family polymerase Dbh. We detected 3 rapid noncovalent steps between binding of a correctly paired dNTP and the rate-limiting step for dNTP incorporation. These early steps resemble those seen with high-fidelity DNA polymerases, such as Klenow fragment, and include a step that may be related to the unstacking of the 5' neighbor of the templating base that is seen in polymerase ternary complex crystal structures. A significant difference between Dbh and high-fidelity polymerases is that Dbh generates no fluorescence changes subsequent to dNTP binding if the primer lacks a 3'OH, suggesting that the looser active site of Y-family polymerases may enforce reliance on the correct substrate structure in order to assemble the catalytic center. Dbh, like other bypass polymerases of the DinB subgroup, generates single-base deletion errors at an extremely high frequency by skipping over a template base that is part of a repetitive sequence. Using 2-AP as a reporter to study the base-skipping process, we determined that Dbh uses a mechanism in which the templating base slips back to pair with the primer terminus while the base that was originally paired with the primer terminus becomes unpaired.

The archaeal Hjm helicase has recQ-like functions, and may be involved in repair of stalled replication fork

The archaeal Hjm is a structure-specific DNA helicase, which was originally identified in the hyperthermophilic archaeon, Pyrococcus furiosus, by in vitro screening for Holliday junction migration activity. Further biochemical analyses of the Hjm protein from P. furiosus showed that this protein preferably binds to fork-related Y-structured DNAs and unwinds their double-stranded regions in vitro, just like the E. coli RecQ protein. Furthermore, genetic analyses showed that Hjm produced in E. coli cells partially complemented the defect of functions of RecQ in a recQ mutant E. coli strain. These results suggest that Hjm may be a functional counterpart of RecQ in Archaea, in which it is necessary for the maintenance of genome integrity, although the amino acid sequences are not conserved. The functional interaction of Hjm with PCNA for its helicase activity further suggests that the Hjm works at stalled replication forks, as a member of the reconstituted replisomes to restart replication.

Environmental stress and lesion-bypass DNA polymerases

In nature, microbes live under a variety of harsh conditions, such as excess DNA damage, starvation, pH shift, or high temperatures. Microbial cells respond to such stressful conditions mostly by switching global patterns of gene expression to relieve the environmental stress. The SOS response, which is induced by DNA damage, is one such global network of gene expression that plays a crucial role in balancing the genomic stability and flexibility that are necessary to adapt to harsh environments. Here, I review the roles of SOS-inducible and noninducible lesion-bypass DNA polymerases in mutagenesis induced by environmental stress, and discuss how these polymerases are coordinated for the replication of damaged chromosomes. Possible contributions of lesion-bypass DNA polymerase in hyperthermophilic archaea, e.g., Sulfolobus solfataricus, to genome maintenance are also discussed.

The properties of steric gate mutants reveal different constraints within the active sites of Y-family and A-family DNA polymerases

Y-family (lesion-bypass) DNA polymerases show the same overall structural features seen in other members of the polymerase superfamily, yet their active sites are more open, with fewer contacts to the DNA and nucleotide substrates. This raises the question of whether analogous active-site side chains play equivalent roles in the bypass polymerases and their classical DNA polymerase counterparts. In Klenow fragment, an A-family DNA polymerase, the steric gate side chain (Glu710) not only prevents ribonucleotide incorporation but also plays an important role in discrimination against purine-pyrimidine mispairs. In this work we show that the steric gate (Phe12) of the Y-family polymerase Dbh plays a very minor role in fidelity, despite its analogous role in sugar selection. Using ribonucleotide discrimination to report on the positioning of a mispaired dNTP, we found that the pyrimidine of a Pu-dPyTP nascent mispair occupies a similar position to that of a correctly paired dNTP in the Dbh active site, whereas in Klenow fragment the mispaired dNTP sits higher in the active site pocket. If purine-pyrimidine mispairs adopt the expected wobble geometry, the difference between the two polymerases can be attributed to the binding of the templating base, with the looser binding site of Dbh permitting a variety of template conformations with only minimal adjustment at the incoming dNTP. In Klenow fragment the templating base is more rigidly held, so that changes in base pair geometry would affect the dNTP position, allowing the Glu710 side chain to serve as a sensor of nascent mispairs.

DNA polymerase catalysis in the absence of Watson-Crick hydrogen bonds: analysis by single-turnover kinetics

We report the first pre-steady-state kinetic studies of DNA replication in the absence of hydrogen bonds. We have used nonpolar nucleotide analogues that mimic the shape of a Watson-Crick base pair to investigate the kinetic consequences of a lack of hydrogen bonds in the polymerase reaction catalyzed by the Klenow fragment of DNA polymerase I from Escherichia coli. With a thymine isostere lacking hydrogen-bonding ability in the nascent pair, the efficiency (k(pol)/Kd) of the polymerase reaction is decreased by 30-fold, affecting the ground state (Kd) and transition state (k(pol)) approximately equally. When both thymine and adenine analogues in the nascent pair lack hydrogen-bonding ability, the efficiency of the polymerase reaction is decreased by about 1000-fold, with most of the decrease attributable to the transition state. Reactions using nonpolar analogues at the primer-terminal base pair demonstrated the requirement for a hydrogen bond between the polymerase and the minor groove of the primer-terminal base. The R668A mutation of Klenow fragment abolished this requirement, identifying R668 as the probable hydrogen-bond donor. Detailed examination of the kinetic data suggested that Klenow fragment has an extremely low tolerance of even minor deviations of the analogue base pairs from ideal Watson-Crick geometry. Consistent with this idea, some analogue pairings were better tolerated by Klenow fragment mutants having more spacious active sites. In contrast, the Y-family polymerase Dbh was much less sensitive to changes in base pair dimensions and more dependent upon hydrogen bonding between base-paired partners.

Novel thermostable Y-family polymerases: applications for the PCR amplification of damaged or ancient DNAs

For many years, Taq polymerase has served as the stalwart enzyme in the PCR amplification of DNA. However, a major limitation of Taq is its inability to amplify damaged DNA, thereby restricting its usefulness in forensic applications. In contrast, Y-family DNA polymerases, such as Dpo4 from Sulfolobus solfataricus, can traverse a wide variety of DNA lesions. Here, we report the identification and characterization of five novel thermostable Dpo4-like enzymes from Acidianus infernus, Sulfolobus shibatae, Sulfolobus tengchongensis, Stygiolobus azoricus and Sulfurisphaera ohwakuensis, as well as two recombinant chimeras that have enhanced enzymatic properties compared with the naturally occurring polymerases. The Dpo4-like polymerases are moderately processive, can substitute for Taq in PCR and can bypass DNA lesions that normally block Taq. Such properties make the Dpo4-like enzymes ideally suited for the PCR amplification of damaged DNA samples. Indeed, by using a blend of Taq and Dpo4-like enzymes, we obtained a PCR amplicon from ultraviolet-irradiated DNA that was largely unamplifyable with Taq alone. The inclusion of thermostable Dpo4-like polymerases in PCRs, therefore, augments the recovery and analysis of lesion-containing DNA samples, such as those commonly found in forensic or ancient DNA molecular applications.

Pre-steady-state kinetic characterization of the DinB homologue DNA polymerase of Sulfolobus solfataricus

Equilibrium as well as pre-steady-state measurements were performed to characterize the molecular basis of DNA binding and nucleotide incorporation by the thermostable archaeal DinB homologue (Dbh) DNA polymerase of Sulfolobus solfataricus. Equilibrium titrations show a DNA binding affinity of about 60 nm, which is approximately 10-fold lower compared with other DNA polymerases. Investigations of the binding kinetics applying stopped-flow and pressure jump techniques confirm this weak binding affinity. Furthermore, these measurements suggest that the DNA binding occurs in a single step, diffusion-controlled manner. Single-turnover, single dNTP incorporation studies reveal maximal pre-steady-state burst rates of 0.64, 2.5, 3.7, and 5.6 s(-1) for dTTP, dATP, dGTP, and dCTP (at 25 degrees C), which is 10-100-fold slower than the corresponding rates of classical DNA polymerases. Another unique feature of the Dbh is the very low nucleotide binding affinity (K(d) approximately 600 mum), which again is 10-20-fold lower compared with classical DNA polymerases as well as other Y-family polymerases. Surprisingly, the rate-limiting step of nucleotide incorporation (correct and incorrect) is the chemical step (phosphoryl transfer) and not a conformational change of the enzyme. Thus, unlike replicative polymerases, an "induced fit" mechanism to select and incorporate nucleotides during DNA polymerization could not be detected for Dbh.

Portraits of a Y-family DNA polymerase

Members of the Y-family of DNA polymerases catalyze template-dependent DNA synthesis but share no sequence homology with other known DNA polymerases. Y-family polymerases exhibit high error rates and low processivity when copying normal DNA but are able to synthesize DNA opposite damaged templates. In the past three years, much has been learned about this family of polymerases including determination of more than a dozen crystal structures with various substrates. In this short review, I will summarize the biochemical properties and structural features of Y-family DNA polymerases.

Pre-steady-state kinetic studies of the fidelity of Sulfolobus solfataricus P2 DNA polymerase IV

Sulfolobus solfataricus P2 DNA polymerase IV (Dpo4) is a thermostable archaeal enzyme and a member of the error-prone and lesion-bypass Y-family. In this paper, for the first time, the fidelity of a Y-family polymerase, Dpo4, was determined using pre-steady-state kinetic analysis of the incorporation of a single nucleotide into an undamaged DNA substrate 21/41-mer at 37 degrees C. We assessed single-turnover (with Dpo4 in molar excess over DNA) saturation kinetics for all 16 possible nucleotide incorporations. The fidelity of Dpo4 was estimated to be in the range of 10(-3)-10(-4). Interestingly, the ground-state binding affinity of correct nucleotides (70-230 microM) is 10-50-fold weaker than those of replicative DNA polymerases. Such a low affinity is consistent with the lack of interactions between Dpo4 and the bound nucleotides as revealed in the crystal structure of Dpo4, DNA, and a matched nucleotide. The affinity of incorrect nucleotides for Dpo4 is approximately 2-10-fold weaker than that of correct nucleotides. Intriguingly, the mismatched dCTP has an affinity similar to that of the matched nucleotides when it is incorporated against a pyrimidine template base flanked by a 5'-template guanine. The incoming dCTP likely skips the first available template base and base pairs with the 5'-template guanine, as observed in the crystal structure of Dpo4, DNA, and a mismatched nucleotide. The mismatch incorporation rates, regardless of the 5'-template base, were approximately 2-3 orders of magnitude slower than the incorporation rates for matched nucleotides, which is the predominant contribution to the fidelity of Dpo4.

Investigating the role of the little finger domain of Y-family DNA polymerases in low fidelity synthesis and translesion replication

Dpo4 and Dbh are Y-family polymerases that originate from two closely related strains of Sulfolobaceae. Quite surprisingly, however, the two polymerases exhibit different enzymatic properties in vitro. For example, Dpo4 can replicate past a variety of DNA lesions, yet Dbh does so with a much lower efficiency. When replicating undamaged DNA, Dpo4 is prone to make base pair substitutions, whereas Dbh predominantly makes single-base deletions. Overall, the two proteins are 54% identical, but the greatest divergence is found in their respective little finger (LF) domains, which are only 41% identical. To investigate the role of the LF domain in the fidelity and lesion-bypassing abilities of Y-family polymerases, we have generated chimeras of Dpo4 and Dbh in which their LF domains have been interchanged. Interestingly, by replacing the LF domain of Dbh with that of Dpo4, the enzymatic properties of the chimeric enzyme are more Dpo4-like in that the enzyme is more processive, can bypass an abasic site and a thymine-thymine cyclobutane pyrimidine dimer, and predominantly makes base pair substitutions when replicating undamaged DNA. The converse is true for the Dpo4-LF-Dbh chimera, which is more Dbh-like in its processivity and ability to bypass DNA adducts and generate single-base deletion errors. Our studies indicate that the unique but variable LF domain of Y-family polymerases plays a major role in determining the enzymatic and biological properties of each individual Y-family member.

Snapshots of replication through an abasic lesion; structural basis for base substitutions and frameshifts

Dpo4 from S. Solfataricus, a DinB-like Y family polymerase, efficiently replicates DNA past an abasic lesion. We have determined crystal structures of Dpo4 complexed with five different abasic site-containing DNA substrates and find that translesion synthesis is template directed with the abasic site looped out and the incoming nucleotide is opposite the base 5' to the lesion. The ensuing DNA synthesis generates a -1 frameshift when the abasic site remains extrahelical. Template realignment during primer extension is also observed, resulting in base substitutions or even +1 frameshifts. In the case of a +1 frameshift, the extra nucleotide is accommodated in the solvent-exposed minor groove. In addition, the structure of an unproductive Dpo4 ternary complex suggests that the flexible little finger domain facilitates DNA orientation and translocation during translesion synthesis.

Crystal structure of a benzo[a]pyrene diol epoxide adduct in a ternary complex with a DNA polymerase

The first occupation-associated cancers to be recognized were the sooty warts (cancers of the scrotum) suffered by chimney sweeps in 18th century England. In the 19th century, high incidences of skin cancers were noted among fuel industry workers. By the early 20th century, malignant skin tumors were produced in laboratory animals by repeatedly painting them with coal tar. The culprit in coal tar that induces cancer was finally isolated in 1933 and determined to be benzo[a]pyrene (BP), a polycyclic aromatic hydrocarbon. A residue of fuel and tobacco combustion and frequently ingested by humans, BP is metabolized in mammals to benzo[a]pyrene diol epoxide (BPDE), which forms covalent DNA adducts and induces tumor growth. In the 70 yr since its isolation, BP has been the most studied carcinogen. Yet, there has been no crystal structure of a BPDE DNA adduct. We report here the crystal structure of a BPDE-adenine adduct base-paired with thymine at a template-primer junction and complexed with the lesion-bypass DNA polymerase Dpo4 and an incoming nucleotide. Two conformations of the BPDE, one intercalated between base pairs and another solvent-exposed in the major groove, are observed. The latter conformation, which can be stabilized by organic solvents that reduce the dielectric constant, seems more favorable for DNA replication by Dpo4. These structures also suggest a mechanism by which mutations are generated during replication of DNA containing BPDE adducts.

Properties and functions of Escherichia coli: Pol IV and Pol V

Escherichia coli possesses two members of the newly discovered class of Y DNA polymerases (Ohmori et al., 2001): Pol IV (dinB) and Pol V (umuD'C). Polymerases that belong to this family are often referred to as specialized or error-prone DNA polymerases to distinguish them from the previously discovered DNA polymerases (Pol I, II, and III) that are essentially involved in DNA replication or error-free DNA repair. Y-family DNA polymerases are characterized by their capacity to replicate DNA, through chemically damaged template bases, or to elongate mismatched primer termini. These properties stem from their capacity to accommodate and use distorted primer templates within their active site and from the lack of an associated exonuclease activity. Even though both belong to the Y-family, Pol IV and Pol V appear to perform distinct physiological functions. Although Pol V is clearly the major lesion bypass polymerase involved in damage-induced mutagenesis, the role of Pol IV remains enigmatic. Indeed, compared to a wild-type strain, a dinB mutant exhibits no clear phenotype with respect to survival or mutagenesis following treatment with DNA-damaging agents. Subtler dinB phenotypes will be discussed below. Moreover, despite the fact that both dinB and umuDC loci are controlled by the SOS response, their constitutive and induced levels of expression are dramatically different. In noninduced cells, Pol V is undetectable by Western analysis. In contrast, it is estimated that there are about 250 copies of Pol IV per cell. On SOS induction, it is believed that only about 15 molecules of Pol V are assembled per cell (S. Sommer, personal communication), whereas Pol IV levels reach approximately 2500 molecules. In fact, despite extensive knowledge of the individual enzymatic properties of all five E. coli DNA polymerases, much more work is needed to understand how their activities are orchestrated within a living cell.

The D246V mutant of DNA polymerase beta misincorporates nucleotides: evidence for a role for the flexible loop in DNA positioning within the active site

DNA polymerase beta, a member of the X family of DNA polymerases, is known to be involved in base excision repair. A key to determining the biochemical properties of this DNA polymerase is structure-function studies of site-specific mutants that result in substitution of particular amino acids at critical sites. In a previous genetic screen, we identified three 3'-azido-2',3'-dideoxythymidine 5'-triphosphate-resistant mutants, namely E249K, D246V, and R253M, of polymerase beta in the flexible loop of the palm domain. In this work, we perform an extensive kinetic analysis to investigate the role of the D246V mutant on polymerase fidelity. We find that D246V misincorporates T opposite template bases G and C. The mechanistic basis of misincorporation appears to be altered DNA positioning within the active site. We provide evidence that the fidelity of D246V is greatly affected by the base that is 5' of the templating base. We propose that the Asp residue at position 246 helps to maintain the proper positioning of the DNA within the polymerase active site and maintains the fidelity of polymerase beta. Altogether, the results suggest that the flexible loop domain of polymerase beta plays a major role in its fidelity.

An error-prone family Y DNA polymerase (DinB homolog from Sulfolobus solfataricus) uses a 'steric gate' residue for discrimination against ribonucleotides

DNA polymerases of the A and B families, and reverse transcriptases, share a common mechanism for preventing incorporation of ribonucleotides: a highly conserved active site residue obstructing the position that would be occupied by a 2' hydroxyl group on the incoming nucleotide. In the family Y (lesion bypass) polymerases, the enzyme active site is more open, with fewer contacts to the DNA and nucleotide substrates. Nevertheless, ribonucleotide discrimination by the DinB homolog (Dbh) DNA polymerase of Sulfolobus solfataricus is as stringent as in other polymerases. A highly conserved aromatic residue (Phe12 in Dbh) occupies a position analogous to the residues responsible for excluding ribonucleotides in other DNA polymerases. The F12A mutant of Dbh incorporates ribonucleoside triphosphates almost as efficiently as deoxyribonucleoside triphosphates, and, unlike analogous mutants in other polymerase families, shows no barrier to adding multiple ribonucleotides, suggesting that Dbh can readily accommodate a DNA-RNA duplex product. Like other members of the DinB group of bypass polymerases, Dbh makes single-base deletion errors at high frequency in particular sequence contexts. When making a deletion error, ribonucleotide discrimination by wild-type and F12A Dbh is the same as in normal DNA synthesis, indicating that the geometry of nucleotide binding is similar in both circumstances.