Cleaved serpin refolds into the relaxed state via a stressed conformer

All-Atom Simulations Reveal How Single-Point Mutations Promote Serpin Misfolding

Protein misfolding is implicated in many diseases, including serpinopathies. For the canonical inhibitory serpin α₁-antitrypsin, mutations can result in protein deficiencies leading to lung disease, and misfolded mutants can accumulate in hepatocytes, leading to liver disease. Using all-atom simulations based on the recently developed bias functional algorithm, we elucidate how wild-type α₁-antitrypsin folds and how the disease-associated S (Glu264Val) and Z (Glu342Lys) mutations lead to misfolding. The deleterious Z mutation disrupts folding at an early stage, whereas the relatively benign S mutant shows late-stage minor misfolding. A number of suppressor mutations ameliorate the effects of the Z mutation, and simulations on these mutants help to elucidate the relative roles of steric clashes and electrostatic interactions in Z misfolding. These results demonstrate a striking correlation between atomistic events and disease severity and shine light on the mechanisms driving chains away from their correct folding routes.

Inhibitory serpins. New insights into their folding, polymerization, regulation and clearance

Serpins are a widely distributed family of high molecular mass protein proteinase inhibitors that can inhibit both serine and cysteine proteinases by a remarkable mechanism-based kinetic trapping of an acyl or thioacyl enzyme intermediate that involves massive conformational transformation. The trapping is based on distortion of the proteinase in the complex, with energy derived from the unique metastability of the active serpin. Serpins are the favoured inhibitors for regulation of proteinases in complex proteolytic cascades, such as are involved in blood coagulation, fibrinolysis and complement activation, by virtue of the ability to modulate their specificity and reactivity. Given their prominence as inhibitors, much work has been carried out to understand not only the mechanism of inhibition, but how it is fine-tuned, both spatially and temporally. The metastability of the active state raises the question of how serpins fold, whereas the misfolding of some serpin variants that leads to polymerization and pathologies of liver disease, emphysema and dementia makes it clinically important to understand how such polymerization might occur. Finally, since binding of serpins and their proteinase complexes, particularly plasminogen activator inhibitor-1 (PAI-1), to the clearance and signalling receptor LRP1 (low density lipoprotein receptor-related protein 1), may affect pathways linked to cell migration, angiogenesis, and tumour progression, it is important to understand the nature and specificity of binding. The current state of understanding of these areas is addressed here.

Cellular folding pathway of a metastable serpin

Although proteins generally fold to their thermodynamically most stable state, some metastable proteins populate higher free energy states. Conformational changes from metastable higher free energy states to lower free energy states with greater stability can then generate the work required to perform physiologically important functions. However, how metastable proteins fold to these higher free energy states in the cell and avoid more stable but inactive conformations is poorly understood. The serpin family of metastable protease inhibitors uses large conformational changes that are downhill in free energy to inhibit target proteases by pulling apart the protease active site. The serpin antithrombin III (ATIII) targets thrombin and other proteases involved in blood coagulation, and ATIII misfolding can thus lead to thrombosis and other diseases. ATIII has three disulfide bonds, two near the N terminus and one near the C terminus. Our studies of ATIII in-cell folding reveal a surprising, biased order of disulfide bond formation, with early formation of the C-terminal disulfide, before formation of the N-terminal disulfides, critical for folding to the active, metastable state. Early folding of the predominantly β-sheet ATIII domain in this two-domain protein constrains the reactive center loop (RCL), which contains the protease-binding site, ensuring that the RCL remains accessible. N-linked glycans and carbohydrate-binding molecular chaperones contribute to the efficient folding and secretion of functional ATIII. The inability of a number of disease-associated ATIII variants to navigate the folding reaction helps to explain their disease phenotypes.

Collapse of a long axis: single-molecule Förster resonance energy transfer and serpin equilibrium unfolding

The energy required for mechanical inhibition of target proteases is stored in the native structure of inhibitory serpins and accessed by serpin structural remodeling. The overall serpin fold is ellipsoidal with one long and two short axes. Most of the structural remodeling required for function occurs along the long axis, while expansion of the short axes is associated with misfolded, inactive forms. This suggests that ellipticity, as typified by the long axis, may be important for both function and folding. Placement of donor and acceptor fluorophores approximately along the long axis or one of the short axes allows single-pair Förster resonance energy transfer (spFRET) to report on both unfolding transitions and the time-averaged shape of different conformations. Equilibrium unfolding and refolding studies of the well-characterized inhibitory serpin α1-antitrypsin reveal that the long axis collapses in the folding intermediates while the monitored short axis expands. These energetically distinct intermediates are thus more spherical than the native state. Our spFRET studies agree with other equilibrium unfolding studies that found that the region around one of the β strands, s5A, which helps define the long axis and must move for functionally required loop insertion, unfolds at low denaturant concentrations. This supports a connection between functionally important structural lability and unfolding in the inhibitory serpins.

Early hydrophobic collapse of α₁-antitrypsin facilitates formation of a metastable state: insights from oxidative labeling and mass spectrometry

The biologically active conformation of α₁-antitrypsin (α₁AT) and other serine protease inhibitors represents a metastable state, characterized by an exposed reactive center loop (RCL) that acts as bait for the target enzyme. The protein can also adopt an inactive "latent" conformation that has the RCL inserted as a central strand in β-sheet A. This latent form is thermodynamically more stable than the active conformation. Nonetheless, folding of α₁AT consistently yields the active state. The reasons that the metastable form is kinetically preferred remain controversial. The current work demonstrates that a carefully orchestrated folding mechanism prevents RCL insertion into sheet A. Temporal changes in solvent accessibility during folding are monitored using pulsed oxidative labeling and mass spectrometry. The data obtained in this way complement recent hydrogen/deuterium exchange results. Those hydrogen/deuterium exchange measurements revealed that securing of the RCL by hydrogen bonding of the first β-strand in sheet C is one factor that favors formation of the active conformation. The oxidative labeling data presented here reveal that this anchoring is preceded by the formation of hydrophobic contacts in a confined region of the protein. This partial collapse sequesters the RCL insertion site early on and is therefore instrumental in steering α₁AT towards its active conformation. RCL anchoring by hydrogen bonding starts to contribute at a later stage. Together, these two factors ensure that formation of the active conformation is kinetically favored. This work demonstrates how the use of complementary labeling techniques can provide insights into the mechanisms of protracted folding reactions.

How the serpin α1-proteinase inhibitor folds

Serpins are remarkable and unique proteins in being able to spontaneously fold into a metastable conformation without the aid of a chaperone or prodomain. This metastable conformation is essential for inhibition of proteinases, so that massive serpin conformational change, driven by the favorable energetics of relaxation of the metastable conformation to the more stable one, can kinetically trap the proteinase-serpin acylenzyme intermediate. Failure to direct folding to the metastable conformation would lead to inactive, latent serpin. How serpins fold into such a metastable state is unknown. Using the ability of component peptides from the serpin α(1)PI to associate, we have now elucidated the pathway by which this serpin efficiently folds into its metastable state. In addition we have established the likely structure of the polymerogenic intermediate of the Z variant of α(1)PI.

Folding mechanism of the metastable serpin α1-antitrypsin

The misfolding of serpins is linked to several genetic disorders including emphysema, thrombosis, and dementia. During folding, inhibitory serpins are kinetically trapped in a metastable state in which a stretch of residues near the C terminus of the molecule are exposed to solvent as a flexible loop (the reactive center loop). When they inhibit target proteases, serpins transition to a stable state in which the reactive center loop forms part of a six-stranded β-sheet. Here, we use hydrogen-deuterium exchange mass spectrometry to monitor region-specific folding of the canonical serpin human α(1)-antitrypsin (α(1)-AT). We find large differences in the folding kinetics of different regions. A key region in the metastable → stable transition, β-strand 5A, shows a lag phase of nearly 350 s. In contrast, the "B-C barrel" region shows no lag phase and the incorporation of the C-terminal residues into β-sheets B and C is largely complete before the center of β-sheet A begins to fold. We propose this as the mechanism for trapping α(1)-AT in a metastable form. Additionally, this separation of timescales in the folding of different regions suggests a mechanism by which α(1)-AT avoids polymerization during folding.

Regulation of proteases by protein inhibitors of the serpin superfamily

The serpins comprise an ancient superfamily of proteins, found abundantly in eukaryotes and even in some bacteria and archea, that have evolved to regulate proteases of both serine and cysteine mechanistic classes. Unlike the thermodynamically determined lock-and-key type inhibitors, such as those of the Kunitz and Kazal families, serpins use conformational change and consequent kinetic trapping of an enzyme intermediate to effect inhibition. By combining interactions of both an exposed reactive center loop and exosites outside this loop with the active site and complementary exosites on the target protease, serpins can achieve remarkable specificity. Together with the frequent use of regulatory cofactors, this permits a sophisticated time- and location-dependent mode of protease regulation. An understanding of the structure and function of serpins has suggested that they may provide novel scaffolds for engineering protease inhibitors of desired specificity for therapeutic use.

The mechanism of fibril formation of a non-inhibitory serpin ovalbumin revealed by the identification of amyloidogenic core regions

Ovalbumin (OVA), a non-inhibitory member of the serpin superfamily, forms fibrillar aggregates upon heat-induced denaturation. Recent studies suggested that OVA fibrils are generated by a mechanism similar to that of amyloid fibril formation, which is distinct from polymerization mechanisms proposed for other serpins. In this study, we provide new insights into the mechanism of OVA fibril formation through identification of amyloidogenic core regions using synthetic peptide fragments, site-directed mutagenesis, and limited proteolysis. OVA possesses a single disulfide bond between Cys(73) and Cys(120) in the N-terminal helical region of the protein. Heat treatment of disulfide-reduced OVA resulted in the formation of long straight fibrils that are distinct from the semiflexible fibrils formed from OVA with an intact disulfide. Computer predictions suggest that helix B (hB) of the N-terminal region, strand 3A, and strands 4-5B are highly β-aggregation-prone regions. These predictions were confirmed by the fact that synthetic peptides corresponding to these regions formed amyloid fibrils. Site-directed mutagenesis of OVA indicated that V41A substitution in hB interfered with the formation of fibrils. Co-incubation of a soluble peptide fragment of hB with the disulfide-intact full-length OVA consistently promoted formation of long straight fibrils. In addition, the N-terminal helical region of the heat-induced fibril of OVA was protected from limited proteolysis. These results indicate that the heat-induced fibril formation of OVA occurs by a mechanism involving transformation of the N-terminal helical region of the protein to β-strands, thereby forming sequential intermolecular linkages.

Refolding and polymerization pathways of neuroserpin

Neuroserpin is a member of the serpin superfamily, and its mutants are retained within the endoplasmic reticulum of neurons as ordered polymers in association with dementia. It has been proposed that neuroserpin polymers are formed by a conformational change in the folded protein. However, an alternative model whereby polymers are formed during protein folding rather than from the folded protein has recently been proposed. We investigated the refolding and polymerization pathways of wild-type neuroserpin (WT) and of the pathogenic mutants S49P and H338R. Upon refolding, denatured WT immediately formed an initial refolding intermediate I(IN) and then underwent further refolding to the native form through a late refolding intermediate, I(R). The late-onset mutant S49P was also able to refold to the native form through I(IN) and I(R), but the final refolding step proceeded at a slower rate and with a lower refolding yield as compared with WT. The early-onset mutant H338R formed I(R) through the same pathway as S49P, but the protein could not attain the native state and remained as I(R). The I(R)s of the mutants had a long lifespan at 4 °C and thus were purified and characterized. Strikingly, when incubated under physiological conditions, I(R) formed ordered polymers with essentially the same properties as the polymers formed from the native protein. The results show that the mutants have a greater tendency to form polymers during protein folding than to form polymers from the folded protein. Our finding provides insights into biochemical approaches to treating serpinopathies by targeting a polymerogenic folding intermediate.

Cloning of a novel ovalbumin gene from quail oviduct and its heterologous expression in Pichia pastoris

An ovalbumin gene was cloned from Chinese quail (Coturnix coturnix) oviduct by RT-PCR and then inserted into the P. pastoris genome under the control of the methanol inducible 5' alcohol oxidase (AOX) promoter. The recombinant P. pastoris strain was demonstrated to be able to efficiently secrete quail ovalbumin by ELISA analysis using a polyclonal antibody raised against quail ovalbumin. The results showed that induction by 0.75% methanol for 48 h led to the synthesis of secreted quail ovalbumin up to a yield of 5.45 g l(-1). The recombinant ovalbumin was further purified into homogeneity through ion exchange and gel filtration chromatography and SDS-PAGE analysis revealed that, compared to natural ovalbumin, the recombinant ovalbumin could have been glycosylated to the similar extent by P. pastoris.

The 2.1-A crystal structure of native neuroserpin reveals unique structural elements that contribute to conformational instability

Neuroserpin is a selective inhibitor of tissue-type plasminogen activator (tPA) that plays an important role in neuronal plasticity, memory, and learning. We report here the crystal structure of native human neuroserpin at 2.1 A resolution. The structure has a helical reactive center loop and an omega loop between strands 1B and 2B. The omega loop contributes to the inhibition of tPA, as deletion of this motif reduced the association rate constant with tPA by threefold but had no effect on the kinetics of interaction with urokinase. Point mutations in neuroserpin cause the formation of ordered intracellular polymers that underlie dementia familial encephalopathy with neuroserpin inclusion bodies (FENIB). Wild-type neuroserpin is also unstable and readily forms polymers under near-physiological conditions in vitro. This is, in part, due to the substitution of a conserved alanine for serine at position 340. The replacement of Ser340 by Ala increased the melting temperature by 3 degrees C and reduced polymerization as compared to wild-type neuroserpin. Similarly, neuroserpin has Asn-Leu-Val at the end of helix F and thus differs markedly from the Gly-X-Ile consensus sequence of the serpins. Restoration of these amino acids to the consensus sequence increased thermal stability and reduced the polymerization of neuroserpin and its transition to the latent conformer. Moreover, introduction of the consensus sequence into S49P neuroserpin that causes FENIB increased the stability and inhibitory activity of the mutant, as well as blocked polymerization and increased the yield of protein during refolding. These data provide a molecular explanation for the inherent instability of neuroserpin and the effect of point mutations that underlie the dementia FENIB.