Migration of the acetabular component: effect of cement pressurization and significance of early radiolucency: a randomized 5-year study using radiostereometry

Migration patterns of acetabular cups: a systematic review and meta-analysis of RSA studies

BACKGROUND AND PURPOSE

We conducted a systematic review and meta-analysis of RSA studies to investigate the early and long-term migration patterns of acetabular cups and the influence of implant factors on cup migration over time.

METHODS

We performed a systematic search of PubMed, Embase, and Scopus databases to identify all RSA studies of cup migration following primary total hip replacement (THR). Proximal migration at 3 and 6 months, 1, 2, 5, and 10 years were considered for analysis. Implant factors investigated included fixation type, head size, bearing surface, uncemented coating design, and the decade of RSA introduction.

RESULTS

47 studies reported the proximal migration of 83 cohorts (2,328 cups). Besides 1 threaded cup design, no implant factor investigated was found to significantly influence proximal migration. The mean pooled 2-year proximal migration of cemented cups (0.14 mm, 95% confidence interval [CI] 0.08-0.20) was not significantly different from uncemented cups (0.12 mm, CI 0.04-0.19). The mean pooled proximal migration at 6 months was 0.11 mm (CI 0.06-0.16) and there was no significant increase between 6 months and 2 years (0.015 mm, CI 0.000-0.030). 27 of 75 cohorts (36%) reported mean proximal migration greater than 0.2 mm at 2 years, which has previously been identified as a predictor of implants at risk of long-term loosening.

CONCLUSION

Our meta-analysis demonstrated that the majority of cup migration occurs within the first 6 months. With one exception, no implant factors influenced the 2-year proximal migration of acetabular cups. 36% of studies with 2-year migration were considered at risk of long-term loosening. Further investigation and comparison against long-term survivorship data would validate 6-month and/or 1-year proximal migration measurements as an earlier predictor of long-term loosening than the current 2-year threshold.

Risk factors for a radiolucent line around the acetabular component with an interface bioactive bone cement technique after primary cemented total hip arthroplasty

Aims

The main aims were to identify risk factors predictive of a radiolucent line (RLL) around the acetabular component with an interface bioactive bone cement (IBBC) technique in the first year after THA, and evaluate whether these risk factors influence the development of RLLs at five and ten years after THA.

Methods

A retrospective review was undertaken of 980 primary cemented THAs in 876 patients using cemented acetabular components with the IBBC technique. The outcome variable was any RLLs that could be observed around the acetabular component at the first year after THA. Univariate analyses with univariate logistic regression and multivariate analyses with exact logistic regression were performed to identify risk factors for any RLLs based on radiological classification of hip osteoarthritis.

Results

RLLs were detected in 27.2% of patients one year postoperatively. In multivariate regression analysis controlling for confounders, atrophic osteoarthritis (odds ratio (OR) 2.17 (95% confidence interval (CI), 1.04 to 4.49); p = 0.038) and 26 mm (OR 3.23 (95% CI 1.85 to 5.66); p < 0.001) or 28 mm head diameter (OR 3.64 (95% CI 2.07 to 6.41); p < 0.001) had a significantly greater risk for any RLLs one year after surgery. Structural bone graft (OR 0.19 (95% CI 0.13 to 0.29) p < 0.001) and location of the hip centre within the true acetabular region (OR 0.15 (95% CI 0.09 to 0.24); p < 0.001) were significantly less prognostic. Improvement of the cement-bone interface including complete disappearance and poorly defined RLLs was identified in 15.1% of patients. Kaplan-Meier survival analysis for the acetabular component at ten years with revision of the acetabular component for aseptic loosening as the end point was 100.0% with a RLL and 99.1% without a RLL (95% CI 97.9 to 100). With revision of the acetabular component for any reason as the end point, the survival rate was 99.2% with a RLL (95% CI 97.6 to 100) and 96.5% without a RLL (95% CI 93.4 to 99.7).

Conclusion

This study demonstrates that acetabular bone quality, head diameter, structural bone graft, and hip centre position may influence the presence of the any RLL.

Cite this article: Bone Joint Open 2021;2(5):278–292.

Minimum 5 year follow-up of clinical and radiographic results of cemented acetabular components with an interface bioactive bone cement technique in primary cemented total hip arthroplasty

INTRODUCTION

A well-fixed cement-bone interface is a crucial factor for acetabular and femoral components in cemented total hip arthroplasty (THA). The aim of the present study was to evaluate the middle-term clinical and radiological results of fixing the acetabular component with an interface bioactive bone cement (IBBC) technique in primary cemented THA.

MATERIALS AND METHODS

We undertook a retrospective review was undertaken of 193 primary cemented THAs in 174 patients using acetabular components cemented with an IBBC technique and followed for a minimum of 5 years (mean 8.3 years; range 5-17 years). Baseline data, clinical and radiological outcomes were evaluated.

RESULTS

Japanese Orthopedic Association hip score and modified Harris hip scores demonstrated significant clinical improvement in all patients (p < 0.001). Radiolucent lines were detected in 15 hips (7.8%) at the first year and 24 hips (12.4%) at the final post-operative follow-up. The Kaplan-Meier survivorship with radiographic loosening as the end point was 97.8% [95% confidence interval (CI) 95.2-100]. With revision of the acetabular component for aseptic loosening as the end point, component survival was 99.0% (95% CI 97.5-100). With revision of the acetabular component for any reason as the end point, component survival was 97.0% (95% CI 93.9-100).

CONCLUSIONS

Clinical and radiological results of the acetabular component with the IBBC technique in primary cemented THA were excellent.

Mortality as a competition risk factor in the survival analysis of the results of the type of fixation of the total hip prosthesis in octogenarian patients

INTRODUCTION

Total hip replacement (THR) is challenging in octogenarians due to associated comorbidities and controversy regarding fixation type. We ask whether cemented THR is superior to uncemented THR in patients above the age of 80 years.

MATERIAL AND METHODS

A total of 382 patients (441 hips) aged 80 years or older who underwent THR between 2004 and 2015 were analysed. A cemented THR was implanted in 196 hips (group 1), an uncemented THR with a grit-blasted stem in 121 (group 2), or with a porous-coated stem in 124 (group 3). Patients in group 1 had a higher mean age, more comorbidities and osteoporotic bone. Survival analysis was calculated using cumulative incidence function to account for the competing risk of death.

RESULTS

Medical complications rate was similar. There were 3post-operative fractures: one in group 2 and 2in group 3. Competing risk analysis showed that the cumulative incidence of revision for any cause was 2.3 in group 1, 6.0 in group 2 and 4.1 in group 3 at 10years, and the cumulative incidence of revision for aseptic loosening was 1.2 in group 1, 3.7 in group 2 and 0 in group 3 at the same period.

CONCLUSIONS

THR presents an acceptable number of adverse events for octogenarian patients. Despite uncemented fixation was satisfactory, the higher peri-prosthetic fracture rate worsens results in this group.

Does vacuum mixing affect diameter shrinkage of a PMMA cement mantle during in vitro cemented acetabulum implantation?

Radiolucent lines on immediate postoperative cemented acetabular component radiographs between the PMMA bone cement mantle and bone are an indicator of an increased risk of early loosening. The cause of these lines has yet to be identified. Thermal and chemical necrosis, fluid interposition and cement shrinkage have all been suggested in the literature. The aim of the study reported here was to take an engineering approach - eliminating confounding variables present during surgery - to quantify the size of the interstice created by cement shrinkage when a 50 mm diameter flanged acetabular cup is implanted in a model acetabulum with a 52 mm hemispherical bore under controlled conditions using vacuum and non-vacuum mixed cement. Irrespective of the mixing method used, a significant interstice was created between the bone cement and the mock acetabulum. When the cement was mixed under vacuum the interstice created between the mock acetabulum and the cement mantle was 0.60 mm ± 0.09 mm; when the cement was mixed under non-vacuum conditions the interstice created was 0.39 mm ± 0.15 mm. Possible explanations for radiolucent lines are discussed.

Acetabular Subchondral Bone Decortication and Its Role in the Outcome of Cemented Total Hip Replacement in Young Patients

Purpose

Long-term fixation of cemented acetabular components can be problematic in younger active patients. Our technique is put forward to improve outcomes and maximize implant survivorship in this particular patient population.

Materials and Methods

We report on a cohort of young adult patients (less than 55 years old) with cemented total hip replacement (THR) using a novel technique in preparing and cementing the acetabulum with a minimum follow-up of 10 years (mean follow-up, 14 years). Retrospectively collected data on clinical and radiological outcomes were reviewed.

Results

Sixty-five THRs were performed with the minimum study follow-up period. Average age for patients was 44 years old (range, 19–55 years). The mean Hip Disability and Osteoarthritis Outcome Score for patients at final appointment was 92.7. Radiographs taken at an average of 14 years after operation showed 63 of 65 hips showed no evidence of any radiological loosening. Cup survivorship was 100% at the end of the study period.

Conclusion

Our technique of preparing the acetabulum in combination with cement fixation is reproducible with excellent results in a cohort of patients prone to early aseptic loosening of the acetabular component.

The influence of early radiolucent lines appearing on femoral head penetration into HXLPE cemented sockets

INTRODUCTION

This study investigates differences in femoral head penetration between highly cross-linked polyethylene (HXLPE) cemented sockets both with and without radiolucent lines (RLLs) in the early postoperative phase and at 5 years follow-up.

METHODS

There were 35 patients (37 hips), mean age of 66.8 years, who underwent total hip arthroplasty (THA) using highly HXLPE cemented sockets. They were divided into 2 groups based on postoperative the early appearance of RLLs. Femoral head penetrations on both anteroposterior- and Lauenstein-view radiographs were evaluated, and the mean polyethylene (PE) wear rate was calculated based on femoral head penetrations between 2 and 5 years.

RESULTS

Femoral head penetrations in the proximal direction were 0.075 mm and 0.150 mm in the RLL and non-RLL groups at 1 year postoperatively ( p = 0.019). At 5 years measured penetration was 0.107 mm and 0.125 mm in the RLL and non-RLL groups, respectively ( p = 0.320). The mean PE wear rates in anteroposterior-view were 0.008 mm/year and 0.003 mm/year in the RLL and non-RLL groups ( p = 0.390) and those in Lauenstein-view were 0.010 mm/year and 0.005 mm/year, respectively ( p = 0.239).

CONCLUSIONS

In the RLL group, the PE bedding-in was less compared with those in the non-RLL group. Additionally, the mean PE wear rate in the RLL group tended to be higher than that in the non-RLL group. The distribution of stress loading through the cement may differ according to whether early RLLs appear.

Is cement penetration in TKR reduced by not using a tourniquet during cementation? A single blinded, randomized trial

Despite suggestions that tourniquet inflation during total knee replacement reduces bleeding and hence improves cement penetration, no studies exist supporting this widely held belief. In this single-blinded, single-surgeon, randomized controlled trial, the tourniquet inflation during cementation group ( n = 20) did not have greater tibial cement penetration compared to a no tourniquet group ( n = 20). No statistically significant differences in semiautomatic digitally measured average and central radiographic tibial plateau penetration values were observed between the two groups ( p = 0.93; p = 0.84). Tourniquet inflation during cementation does not appear to improve tibial cementation penetration.

Finite element study of the acetabulum in cemented hip arthroplasty investigating retention or removal of the subchondral bone plate

The importance of the subchondral bone plate of the acetabulum when preparing the pelvis for a cemented acetabular cup during total hip arthroplasty (THA) has been investigated using finite element analysis. The effect of retaining or removing the subchondral bone plate and the use of anchoring holes are compared. Loading was applied via both hip joint contact force and the activity of up to 22 muscles at five stages through the load bearing phase of the gait cycle. Removing the subchondral bone plate leads to decreased stresses in the cancellous bone and slightly increased stresses in the cortical shell superior to the acetabulum. The differences between the two cases are small, nevertheless there are indications that removal of the subchondral bone plate reduces the stresses. Increasing the cement penetration depth leads to a slightly more rigid structure, due to cement penetrating the cancellous bone. Adding anchoring holes moves the position of the highest cancellous bone strains from the bone-cement interface into the cancellous bone. Thus removal of the subchondral bone plate should lead to an increased potential for cement penetration into the cancellous bone which should be beneficial for cup fixation and thus improve long term implant survival.

Positive effect of removal of subchondral bone plate for cemented acetabular component fixation in total hip arthroplasty: a randomised RSA study with ten-year follow-up

We hypothesised that the removal of the subchondral bone plate (SCBP) for cemented acetabular component fixation in total hip arthroplasty (THA) offers advantages over retention by improving the cement-bone interface, without jeopardising implant stability. We have previously published two-year follow-up data of a randomised controlled trial (RCT), in which 50 patients with primary osteoarthritis were randomised to either retention or removal of the SCBP. The mean age of the retention group (n = 25, 13 males) was 70.0 years (sd 6.8). The mean age in the removal group (n = 25, 16 males) was 70.3 years (sd 7.9). Now we have followed up the patients at six (retention group, n = 21; removal group, n = 20) and ten years (retention group: n = 17, removal group: n = 18), administering clinical outcome questionnaires and radiostereometric analysis (RSA), and determining the presence of radiolucent lines (RLLs) on conventional radiographs. RSA demonstrated similar translation and rotation patterns up to six years. Between six and ten years, proximal acetabular component migration and changes of inclination were larger in the retention group, although the mean differences did not reach statistical significance. Differences in migration were driven by two patients in the SCBP retention group with extensive migration versus none in the SCBP removal group. The significant difference (p < 0.001) in the development of radiolucent lines in the retention group, previously observed at two years, increased even further during the course of follow-up (p < 0.001). While recognising SCBP removal is a more demanding technique, we conclude that, wherever possible, the SCBP should be removed to improve the cement-bone interface in order to maximise acetabular component stability and longevity.

Adherence of hip and knee arthroplasty studies to RSA standardization guidelines. A systematic review

BACKGROUND AND PURPOSE

Guidelines for standardization of radiostereometry (RSA) of implants were published in 2005 to facilitate comparison of outcomes between various research groups. In this systematic review, we determined how well studies have adhered to these guidelines.

METHODS

We carried out a literature search to identify all articles published between January 2000 and December 2011 that used RSA in the evaluation of hip or knee prosthesis migration. 2 investigators independently evaluated each of the studies for adherence to the 13 individual guideline items. Since some of the 13 points included more than 1 criterion, studies were assessed on whether each point was fully met, partially met, or not met.

RESULTS

153 studies that met our inclusion criteria were identified. 61 of these were published before the guidelines were introduced (2000-2005) and 92 after the guidelines were introduced (2006-2011). The methodological quality of RSA studies clearly improved from 2000 to 2011. None of the studies fully met all 13 guidelines. Nearly half (43) of the studies published after the guidelines demonstrated a high methodological quality and adhered at least partially to 10 of the 13 guidelines, whereas less than one-fifth (11) of the studies published before the guidelines had the same methodological quality. Commonly unaddressed guideline items were related to imaging methodology, determination of precision from double examinations, and also mean error of rigid-body fitting and condition number cutoff levels.

INTERPRETATION

The guidelines have improved methodological reporting in RSA studies, but adherence to these guidelines is still relatively low. There is a need to update and clarify the guidelines for clinical hip and knee arthroplasty RSA studies.

Marker-based or model-based RSA for evaluation of hip resurfacing arthroplasty? A clinical validation and 5-year follow-up

BACKGROUND

The stability of implants is vital to ensure a long-term survival. RSA determines micro-motions of implants as a predictor of early implant failure. RSA can be performed as a marker- or model-based analysis. So far, CAD and RE model-based RSA have not been validated for use in hip resurfacing arthroplasty (HRA).

MATERIALS/METHODS

A phantom study determined the precision of marker-based and CAD and RE model-based RSA on a HRA implant. In a clinical study, 19 patients were followed with stereoradiographs until 5 years after surgery. Analysis of double-examination migration results determined the clinical precision of marker-based and CAD model-based RSA, and at the 5-year follow-up, results of the total translation (TT) and the total rotation (TR) for marker- and CAD model-based RSA were compared.

RESULTS

The phantom study showed that comparison of the precision (SDdiff) in marker-based RSA analysis was more precise than model-based RSA analysis in TT (p CAD < 0.001; p RE = 0.04) and TR (p CAD = 0.01; p RE < 0.001). The clinical precision (double examination in 8 patients) comparing the precision SDdiff was better evaluating the TT using the marker-based RSA analysis (p = 0.002), but showed no difference between the marker- and CAD model-based RSA analysis regarding the TR (p = 0.91). Comparing the mean signed values regarding the TT and the TR at the 5-year follow-up in 13 patients, the TT was lower (p = 0.03) and the TR higher (p = 0.04) in the marker-based RSA compared to CAD model-based RSA.

INTERPRETATION

The precision of marker-based RSA was significantly better than model-based RSA. However, problems with occluded markers lead to exclusion of many patients which was not a problem with model-based RSA. HRA were stable at the 5-year follow-up. The detection limit was 0.2 mm TT and 1° TR for marker-based and 0.5 mm TT and 1° TR for CAD model-based RSA for HRA.

Cemented polyethylene and cementless porous-coated acetabular components have similar outcomes at a mean of seven years after total hip replacement: a prospective randomised study

The aim of this prospective randomised study was to compare the clinical and radiological results of a cemented all-polyethylene Ultima acetabular component with those of a cementless porous-coated acetabular component (PFC) following total hip replacement (THR). A total of 287 patients received either a polyethylene acetabular component (group A) or a cobalt-chromium porous-coated component (group B) with an identical cemented femoral component and 28 mm cobalt-chromium head, thus making it the largest study of its type. Patients were evaluated radiologically and clinically using the Harris hip score (HHS). Group A comprised 183 patients (73 male, 110 female) with a mean age of 71.3 years (55 to 89). Group B comprised 104 patients (48 male, 56 female) with a mean age of 69.8 years (56 to 89). A total of 16 patients (13 in Group A, three in Group B) did not have post-operative data for analysis. The mean follow-up in group A was 7.52 years (0.4 to 15.0) and in Group B 7.87 years (0.5 to 14.0). At final follow-up the mean HHS was similar between groups A and B (74.5 (25 to 100) and 78.0 (37 to 100), respectively; p = 0.068). The total number of revisions for any cause was 28, 17 of which were in group A and 11 in group B. The ten-year survivorship was 86.8% (95% confidence interval (CI) 78.4 to 92.1) and 89.2% (95% CI 78.3 to 94.8) for groups A and B, respectively (log-rank p-value = 0.938). A total of 20 cemented and two cementless acetabular components had evidence of acetabular radiolucencies or acetabular component migration at last follow-up (p = 0.001). These results indicate that patients with a cemented all-polyethylene and cementless porous-coated polyethylene lined acetabular component have similar long-term clinical outcomes.

Micro-mechanical damage of trabecular bone-cement interface under selected loading conditions: a finite element study

In this study, two micro finite element models of trabecular bone-cement interface developed from high resolution computed tomography (CT) images were loaded under compression and validated using the in situ experimental data. The models were then used under tension and shear to examine the load transfer between the bone and cement and the micro damage development at the bone-cement interface. In addition, one models was further modified to investigate the effect of cement penetration on the bone-cement interfacial behaviour. The simulated results show that the load transfer at the bone-cement interface occurred mainly in the bone cement partially interdigitated region, while the fully interdigitated region seemed to contribute little to the mechanical response. Consequently, cement penetration beyond a certain value would seem to be ineffective in improving the mechanical strength of trabecular bone-cement interface. Under tension and shear loading conditions, more cement failures were found in denser bones, while the cement damage is generally low under compression.

Total hip arthroplasty: to cement or not to cement the acetabular socket? A critical review of the literature

The optimal method for acetabular socket fixation remains controversial. We present a critical analysis of the current evidence from a systemic literature review of comparative studies, long-term case series, prior literature reviews, meta-analysis, and national arthroplasty registry data for cemented and uncemented acetabular components to determine the respective survivorship rates, overall risk of re-operation, dislocation rates, and wear-related complications. Using contemporary techniques, both cemented and uncemented sockets can yield good long-term results, but our evaluation suggests that the overall/all cause re-operation risk is lower for cemented fixation. Until and unless crosslinked polyethylene (PE) liners or alternative bearings can prove to yield superior outcome in the future, the cemented PE cup remains the gold standard, in all age groups, by which every acetabular component should be compared.

Outcomes of Charnley total hip arthroplasty using improved cementing with so-called second- and third-generation techniques

BACKGROUND

Techniques of cemented total hip arthroplasty have developed over time. We present the outcomes of Charnley total hip arthroplasty performed using improved second- and third-generation cementing techniques.

METHODS

We reviewed the radiologic results of 91 Charnley total hip arthroplasties performed using second- and third-generation cementing techniques. Second-generation techniques involved making multiple anchor holes, a double-cementing method on the acetabular side and an intramedullary plug, and retrograde filling with a cement gun on the femoral side in 57 hips. Third-generation techniques involved additional vacuum mixing and cement pressurization in 34 hips.

RESULTS

Joint survival rates at 20 years when using second-generation techniques were 89% for the socket and 94% for the stem with aseptic loosening as the end point; the survival rates at 10 years when using third-generation techniques were 97 and 100%, respectively. According to our radiographic evaluation system for the clear zone at 5 years, there was less clear zone in the acetabular side with the third-generation techniques than with second-generation techniques. In the femoral side, there was very little development of the clear zone, but the difference between generations was not significant.

CONCLUSIONS

Second- and third-generation cementing techniques showed excellent survivorship. The clear zone scores at 5 years indicated that third-generation techniques were effective, especially in the acetabular side, and may produce better long-term results than second-generation techniques.

Comparison of flanged and unflanged acetabular cup design. An experimental study using ceramic and cadaveric acetabuli

BACKGROUND AND PURPOSE

Adequate depth of cement penetration and cement mantle thickness is important for the durability of cemented cups. A flanged cup, as opposed to unflanged, has been suggested to give a more uniform cement mantle and superior cement pressurization, thus improving the depth of cement penetration. This hypothesis was tested experimentally.

MATERIALS AND METHODS

The same cup design with and without flange (both without cement spacers) was investigated regarding intraacetabular pressure, cement mantle thickness, and depth of cement penetration. With machine control, the cups were inserted into open-pore ceramic acetabular models (10 flanged, 10 unflanged) and into paired cadaver acetabuli (10 flanged, 10 unflanged) with prior pressurization of the cement.

RESULTS

No differences in intraacetabular pressures during cup insertion were found, but unflanged cups tended to migrate more towards the acetabular pole. Flanged cups resulted in thicker cement mantles because of less bottoming out, whereas no differences in cement penetration into the bone were observed.

INTERPRETATION

Flanged cups do not generate higher cementation pressure or better cement penetration than unflanged cups. A possible advantage of the flange, however, may be to protect the cup from bottoming out, and there is possibly better closure of the periphery around the cup, sealing off the cement-bone interface.

Stability of cemented in-line pegged glenoid compared with keeled glenoid components in total shoulder arthroplasty

BACKGROUND

Considerable interest has been focused on the design of the glenoid component used in total shoulder arthroplasty in order to reduce the risk of loosening. One design-related feature that has attracted attention is whether to use pegged or keeled cemented glenoid components. The main purpose of this study was to compare the fixation of cemented keeled glenoid components with that of cemented in-line pegged glenoid components.

METHODS

In a prospective randomized study, we compared the stability of cemented, all-polyethylene, keeled glenoid components and cemented, all-polyethylene, in-line three-pegged glenoid components by radiostereometric analysis. Twenty-seven shoulders in twenty-five patients with osteoarthritis (twenty-two shoulders had primary and five shoulders had secondary osteoarthritis) were included. There were sixteen women and nine men, and the mean age was sixty-four years. Radiostereometric analysis and conventional radiographs were carried out at five days, at four months, and at one and two years postoperatively.

RESULTS

The mean Constant and Murley score preoperatively and two years postoperatively was 25 and 70, respectively, for shoulders with the keeled glenoid component and 22 and 70 for the shoulders with a pegged component. No significant difference was detected between groups with regard to the average micromigration of the glenoid components at any of the time points. The average translation was <1 mm, while the median value was <0.3 mm at two years, with no significant difference between the different axes. In five shoulders (three with the keeled component and two with the pegged component), translation at two years was >1 mm. In fourteen shoulders (eight with the keeled and six with the pegged component), the rotation around one or several axes was >2 degrees . We were not able to detect any specific pattern with regard to movement for either type of component nor were we able to detect any difference between the two types of components in the way they migrated, if migration occurred.

CONCLUSIONS

Cemented all-polyethylene keeled or in-line three-pegged glenoid components appear to have similar stability during the first two years after surgery. Studies with a longer follow-up period are needed to relate these findings to long-term clinical and radiographic outcomes.

The influence of a suction device on fixation of a cemented cup using RSA

The quality of technique used at the time of socket cementation is crucial in ensuring a durable long-term result of the implant. We asked whether a new instrument, an aspirator retractor introduced into the wing of the ilium before socket preparation and cementation, would enhance cement fixation as defined by RSA and radiographic examination. We randomized 38 patients into two groups. The surgical technique was identical between the groups with the exception of the use of the aspirator retractor. Patients were followed clinically and with radiostereometry at a minimum of 2 years. We compared gross radiographic appearances, including the depth of penetration of cement and the incidence of postoperative and 2-year radiolucent lines. There was no difference in proximal migration between the two groups. No improvement of fixation was proven from the measured translations and rotations of the socket in the suction group. We found no difference in the number or extent of radiolucent lines or the depth of cement penetration when the iliac suction device was used in conjunction with contemporary cementing techniques. Although the data suggest no short-term advantage in this small study, we will continue to follow these patients presuming there will be improved outcomes in the longer term and since the device provides an easier method of obtaining adequate fixation, especially if technical difficulties are encountered during the pressurization procedure.

The long-term outcome of the cemented Weber acetabular component in total hip replacement using a second-generation cementing technique

We report the long-term outcome of a modified second-generation cementing technique for fixation of the acetabular component of total hip replacement. An earlier report has shown the superiority of this technique assessed by improved survival compared with first-generation cementing. The acetabular preparation involved reaming only to the subchondral plate, followed by impaction of the bone in the anchorage holes. Between 1978 and 1993, 287 total hip replacements were undertaken in 244 patients with a mean age of 65.3 years (21 to 90) using a hemispherical Weber acetabular component with this modified technique for cementing and a cemented femoral component. The survival with acetabular revision for aseptic loosening as the endpoint was 99.1% (95% confidence interval 97.9 to 100 after ten years and 85.5% (95% confidence interval 74.7 to 96.2) at 20 years. Apart from contributing to a long-lasting fixation of the component, this technique also preserved bone, facilitating revision surgery when necessary.

Clinical accuracy of imaging techniques for talar neck malunion

OBJECTIVES

To compare the ability of plain radiographs, computed tomography (CT), and radiostereometric analysis (RSA) to detect changes in talus fracture fragment position and alignment using an in vitro model.

METHODS

Eight cadaveric tali were osteotomized at the talar neck. RSA beads were inserted into each talar fragment. The talus was anatomically reduced and stabilized with a pair of 3.5-mm cortical screws. Plain radiographs and RSA films were obtained. The fragments were then displaced and rotated to create a varus and supination deformity, and screw fixation was repeated in nonanatomic alignment. Displacement and rotation were directly measured. Plain radiographs and RSA were repeated, and CT scans were obtained. The RSA measurements were interpreted in a blinded fashion by an experienced researcher. Two independent blinded orthopedic trauma surgeons measured the displacement and rotation using plain films and CT. The results from each radiographic measurement were compared to the measured displacement and rotation using ANOVA.

RESULTS

Plain radiographs, RSA, and CT all underestimated the measured talar neck displacement and rotation. Radiographs underestimated displacement by 5.0 +/- 2.9 mm, RSA by 5.9 +/- 2.0 mm, and CT scans by 2.4 +/- 4.8 mm (P < 0.05). Rotation was also underestimated by all 3 techniques, but the differences among techniques were not statistically significant.

CONCLUSIONS

The most accurate imaging technique to measure displacement in talar neck malunion is CT scan. RSA was less useful as an imaging technique in this study.

High-precision measurements of cementless acetabular components using model-based RSA: an experimental study

BACKGROUND

In RSA, tantalum markers attached to metal-backed acetabular cups are often difficult to detect on stereo radiographs due to the high density of the metal shell. This results in occlusion of the prosthesis markers and may lead to inconclusive migration results. Within the last few years, new software systems have been developed to solve this problem. We compared the precision of 3 RSA systems in migration analysis of the acetabular component.

MATERIAL AND METHODS

A hemispherical and a non-hemispherical acetabular component were mounted in a phantom. Both acetabular components underwent migration analyses with 3 different RSA systems: conventional RSA using tantalum markers, an RSA system using a hemispherical cup algorithm, and a novel model-based RSA system.

RESULTS

We found narrow confidence intervals, indicating high precision of the conventional marker system and model-based RSA with regard to migration and rotation. The confidence intervals of conventional RSA and model-based RSA were narrower than those of the hemispherical cup algorithm-based system regarding cup migration and rotation.

INTERPRETATION

The model-based RSA software combines the precision of the conventional RSA software with the convenience of the hemispherical cup algorithm-based system. Based on our findings, we believe that these new tools offer an improvement in the measurement of acetabular component migration.

Is removal of subchondral bone plate advantageous in cemented cup fixation? A randomized RSA study

There is uncertainty regarding whether and how the subchondral bone plate should be treated during acetabular preparation for cemented cup fixation in a total hip arthroplasty. We hypothesized that removing the bone plate would improve the cement-bone interface without jeopardizing the initial cup stability, and therefore, be advantageous to long-term cup survival. We randomized 50 patients with primary osteoarthritis into two groups, one for removal and one for retention of the subchondral bone plate. The patients were evaluated during 2 years followup using repeated radiostereometric examinations, analyses of radiolucent lines, and clinical followups. Patient scoring was done using the Western Ontario and McMaster Universities Osteoarthritis Index, the Short Form-12, and the Harris hip score. Removal of the subchondral bone plate resulted in a superior cement-bone interface with less development of radiolucent lines. The radiostereometry results showed small migrations in both groups. We found no differences in cup stability between groups, although a difference was observed in rotational behavior with the removal group stabilizing in a slightly vertical position whereas the retention group showed slight but progressive rotation into a more horizontal position. No differences were found during clinical followups. Removing the subchondral bone plate, where possible, improves the cement-bone interface without jeopardizing the stability, implying better long-term cup survival. However, it is a more demanding surgical technique.

LEVEL OF EVIDENCE

Therapeutic study, Level I (high quality randomized controlled trial with statistically significant difference or no statistically significant difference but narrow confidence intervals). See the Guidelines for Authors for a complete description of levels of evidence.