Synthesis and Application of Tetracycline Imprinted Polymer

Removal of naproxen and diclofenac using magnetic nanoparticles/nanocomposites

Magnetic iron oxide and iron/copper nanoparticles were synthesized using Lathyrus brachypterus extract, and then magnetic Fe₃O₄–CS, Fe₃O₄–AT, Fe/Cu–CS and Fe/Cu–AT nanocomposite beads were synthesized using chitosan and alginate natural polymers. They were used for both adsorption and heterogeneous catalysts for the catalytic wet peroxidation (CWPO) of naproxen (NPX), diclofenac (DCF) and NPX + DCF drugs which are important micro-organic pollutants, separately and together (NPX + DCF) from aqueous media. In adsorption studies, the drugs were adsorbed very quickly in the first minutes and then, desorbed in between 8 and 10 min. In competitive adsorption, the adsorbents showed selective properties for DCF and NPX. In CWPO technique, drug removal was achieved in 9 min with a conversion capacity of 92% for DCF with Fe/Cu–CS and 84% for NPX with Fe/Cu–AT optimum experimental conditions, such as pH 5, 30% of H₂O₂, 100 mg catalyst and 298 K. Based on reusability of the catalysts, it was seen that there was a slight decrease in the removal efficiencies in the third cycle and the stable and active structure of the catalyst was preserved to the desired extent. Furthermore, the oxidation reaction was in good agreement with the pseudo-first-order kinetic model.

Qualitative immunoassay for the determination of tetracycline antibiotic residues in milk samples followed by a quantitative improved HPLC-DAD method

Environmental contaminant is one of several problems harming people and wildlife. An example of current emerging contaminants are antibiotics residues that can present in water and food. Although antibiotics are intended to treat or prevent human and animal infections, antibiotics have also been used as animal food supplements for their ability to promote growth and feed efficiency. This overuse of antibacterial has resulted in the accumulation of antibiotics residues in food products which are eventually consumed by human. The continuous unnecessary exposure of human to antibiotics through the direct animals meet or milk, or indirectly through plants or soil can increase the chance of the emergence of multi drug resistance bacteria and consequently adversely affecting human health. New regulations have been imposed regarding antibiotics utilization. Due to the scarce of data regarding antibiotics residue conditions in different types of food intended for human consumption in Saudi Arabia, this study proposed an optimized chromatographic method (HPLC-DAD) followed by an immunoassay approach for specifically detecting tetracyclines antibiotics in animal milk samples. The method was carried out using an RP-C18 column with a mobile phase consisting of 0.01 M KH₂PO₄: acetonitrile:methanol (70:20:10, v/v/v) adjusted to pH 4. Improvements were observed in the method in terms of resolution and sensitivity. The protein precipitation method used for extraction demonstrated high percent recoveries of 85-101%. The method was validated according to the guidelines of the International Conference for Harmonization (ICH). It is evidently clear from these findings that the presence of tetracycline and oxytetracycline antibiotics residues in milk products from the Saudi market are below the maximum residual limits (MRLs).

Full Green Detection of Antibiotic Tetracyclines Using Fluorescent Poly(ethylene glycol) as the Sensor and the Mechanism Study

Tetracyclines are well-known antibiotics and widely used against a variety of bacterial infections. Their monitoring and detection have been an important issue. To this end, a vast number of methods have been developed; fluorescence sensing is one of the most reported. However, most of the reported sensors are made from transition metals with sophisticated multiprocesses; polymers are hardly seen for this purpose, particularly biocompatible ones. Herein, an aqueous solution of poly(ethylene glycol) (PEG), well known for being biocompatible, is shown to emit under excitation of 280 nm, while the solutions of selected tetracyclines, namely, doxycycline (DOX) and tetracycline (TC), are non-emissive under the same conditions. In the binary solutions of PEG-DOX or PEG-TC, PEG emission is sharply quenched with high sensitivity and selectivity. PEG was then used as a sensor for DOX and TC detections in water with high performance compared to reported studies. The same tests were also done by DOX spiking in milk and tap water, demonstrating that DOX was practically fully recovered. The quenching mechanism was ascribed to the interaction between the O atoms of PEG in clusters and specific heteroatom groups on tetracycline molecules through hydrogen bonding, elucidated from FTIR and NMR analyses. Therefore, this work provides a novel, fully green, easy to operate, low cost, and reliable protocol for tetracycline monitoring and detection and opens new potential application for PEG.

Synthesis and characterization of tetracycline-imprinted membranes: A detailed positron annihilation lifetime spectroscopy investigation

Molecularly imprinted thin membranes for selective removal of tetracycline from real water samples were prepared using the radiation-induced polymerization method. The chemical and physical characterization of the membranes was conducted by FTIR, XPS, AFM and SEM analyses. The effect of the template on the size and the size distribution of the pores in the membrane structure was investigated by positron annihilation lifetime spectroscopy (PALS) experiments. The presence of the template molecule causes the formation of larger cavities, which have a strong correlation to the molecular size of the template molecule. The density of the free volume holes in the imprinted network shows a significant increase due to the presence of the template molecule. The binding performances of the membranes were tested against various factors such as pH, time and initial concentration of template molecules. The specific selectivity of the membranes was investigated by cross-reactivity experiments. The binding capacity of the imprinted membranes was obtained at 14.5 μmol g^-1 , with the highest imprinting factor (2.84) for tetracycline. The imprinting factor was obtained at 1.44, 1.25 and 1.57 for oxytetracycline hydrochloride, doxycycline hyclate and chlortetracycline, respectively. The binding capability of the imprinted membranes in real water samples was promising for the application of the membranes as a filter material for removal of tetracycline with high binding capacity. Tetracycline binding percentage of the membranes was determined at 92.4, 81.1., 75.0 and 68.7 for ultra-pure water, tap water and natural water samples collected from different sources, respectively.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.