Simultaneous Determination of Gallium(III) and Indium(III) in Urine and Water Samples with Cloud Point Extraction and by Inductively Coupled Plasma Optical Emission Spectrometry

Comparison of the performance of atmospheric pressure glow discharges operated between a flowing liquid cathode and either a pin-type anode or a helium jet anode for the Ga and In determination by the optical emission spectrometry

Novel atmospheric pressure glow discharge (APGD) microplasma systems, sustained between a miniaturized flowing liquid cathode (FLC) and either a pin-type anode or a He nozzle jet were investigated for the determination of Ga and In by the optical emission spectrometry (OES). The most influential working parameters, i.e., solution flow rate, acid concentration, discharge current, and He flow rate, were optimized for both studied systems. Furthermore, the effect of the addition of low molecular weight organic compounds (LMWOCs) into the FLC solution on the signals intensity of Ga and In was investigated. Subsequently, the impact of concomitant ions on the signals intensity of Ga and In was thoroughly studied and it was established that both studied methods are relatively resistant to matrix effects. Under the optimized conditions, the detection limits (DLs, assessed on the basis of the 3σ criterion) of the studied elements were similar for both discharges and ranged between 1.8 and 2.3 μg L^-1 for Ga and 0.37-0.40 μg L^-1 for In. The received DLs were therefore better than those obtained for other spectrometric methods being premised upon microplasma systems and comparable with those obtained by currently employed large-scale instrumentation. The system with the pin-type anode was successfully applied for the Ga and In determination in four leachates of solders and electronic scrap as well as river water, using external calibration with simple standard solutions. The received results were compared to those obtained from ICP-OES or ICP-MS measurements and their recoveries were fallen within the range of 98-114%, confirming the excellent accuracy and reliability of the developed FLC-APGD-OES method.

A new thiourea derivative [2-(3-ethylthioureido)benzoic acid] for cloud point extraction of some trace metals in water, biological and food samples

2-(3-Ethylthioureido)benzoic acid was prepared and characterized by electronic spectrum, elemental analysis, Fourier transform infrared spectroscopy, ¹H nuclear magnetic resonance spectrum and mass spectrum. The produced ligand was applied for the preconcentrative of Fe³⁺, Co²⁺, Cu²⁺ and Zn²⁺ in aqueous samples by cloud point extraction methodology. Triton X-114 was used as extractant. Experimental parameters that may affect the extraction process were examined and optimized; such as pH, ligand and triton concentrations, type of diluting solvent, extraction temperature and ionic strength. The calibration curves were linear upto 500μgL^-1 for Fe³⁺, Cu²⁺ and Zn²⁺ and upto 200μgL^-1 for Co²⁺. The achieved detection limits were 1.5, 0.23, 0.71 and 0.35μgL^-1 for Fe³⁺, Co²⁺, Cu²⁺ and Zn²⁺ respectively. The accuracy was established by analysis of certified reference materials (Seronorm whole blood L2 and ZCS ZC85006 Tomato). The proposed procedure was used for preconcentration of these metal ions in water, biological and food samples prior to their determination by flame atomic absorption spectrometry.

Solid Phase Extraction and Preconcentration of Trace Gallium, Indium, and Thallium Using New Modified Amino Silica

Amino silica gel functionalized with 2-hydroxy-5 -(2-hydroxybenzylideneamino)benzoic acid was synthesized, characterized and used as adsorbent for the removal of Ga³⁺, In³⁺ and Tl³⁺ from aqueous solution prior to their determination by flame atomic absorption spectrometry. Experimental parameters that affect the separation process were investigated in both batch and column modes. The maximum adsorption capacities of the sorbent are 61.7 mg g^-1, 81.3 mg g^-1 and 133.0 mg g^-1 for Ga³⁺, In³⁺ and Tl³⁺, respectively. The preconcentration factor is 200 and the limits of detection of Ga³⁺, In³⁺ and Tl³⁺ are 4.10 μg L^-1, 1.55 μg L^-1 and 1.21 μg L^-1, respectively. Interference by Al³⁺ can be masked by the addition of F^-; and that of Fe³⁺ by its reduction to Fe²⁺ using 10% ascorbic acid. The method was successfully applied for the determination of these ions in water, sediments and liquid crystal display samples.

Application of Cloud Point Extraction for Cadmium in Biological Samples of Occupationally Exposed Workers: Relation Between Cadmium Exposure and Renal Lesion

Cadmium (Cd) level in blood and urine of soldering iron workers (n=49) and 41 matched healthy controls has been assessed. Cloud point extraction was employed for preconcentration of Cd. The Cd ions formed hydrophobic complex with 9,10-phenanthraquinone monoethyl thiosemicarbazone that was extracted by surfactant-rich phases in the nonionic surfactant Triton X-114. The surfactant-rich phase was diluted with 1 M HNO3 in methanol prior to its analysis by graphite furnace atomic absorption spectrometry. The parameters affecting the extraction efficiency of the proposed method, such as solution pH, amount of complexing agent, surfactant concentration, temperature, and incubation time, were optimized. Under the optimum experimental conditions, the detection limit and the enrichment factor were 0.04 μg L(-1) and 61, respectively. Relative standard deviation of 10 μg L(-1) Cd was less than 3.0%. The accuracy of the method was examined by analysis of certified reference materials. It was observed that soldering iron workers are liable to Cd overload as indicated by higher levels of Cd in blood and urine when compared with the controls. This exposure may lead to kidney damage indicated by elevation of urinary excretion of both N-acetyl-β-D-glucosaminidase and β2-microglobulin.

A flow method based on solvent extraction coupled on-line to a reversed micellar mediated chemiluminescence detection for selective determination of gold(III) and gallium(III) in water and industrial samples

A rapid and sensitive flow method, based on the combination of on-line solvent extraction with reversed micellar mediated chemiluminescence (CL) detection using rhodamine B (RB), was investigated for the selective determination of Au(III) and Ga(III) in aqueous solutions. 2.0 M HCl was the optimum for extracting Au(III) while a 5.0M HCl solution containing 2.5M LiCl was selected as an optimum acidic medium for extraction of Ga(III). The Au(III) and Ga(III) chloro-complex anions were extracted from the above aqueous acidic solutions into toluene as their ion-pair complexes with the protonated RBH(+) ion followed by membrane phase separation in a flow system. In a flow cell of a detector, the extract was mixed with the reversed micellar solution of cetyltrimethylammonium chloride (CTAC) in 1-hexanol-cyclohexane/water (1.0M HCl) containing 0.10 M cerium(IV) and 0.05 M lithium sulfate. Then uptake of the ion-pair by the CTAC reversed micelles and the subsequent CL oxidation of RB with Ce(IV) occurred easily and the CL signals produced were recorded. Using a flow injection system, a detection limit (DL) of 0.4 μM Au(III) and 0.6 μM Ga(III), and linear calibration graphs with dynamic ranges from the respective DLs to 10 μM for Au(III) and Ga(III) were obtained under the optimized experimental conditions. The relative standard deviations (n=6) obtained at 2.0 µM Au(III) and 4.0 µM Ga(III) were 3.0% and 2.4%, respectively. The presented CL methodology has been applied for the determination of Au(III) and Ga(III) in water and industrial samples with satisfactory results.

Complex-forming organic ligands in cloud-point extraction of metal ions: a review

Cloud-point extraction (CPE), an easy, safe, environmentally friendly, rapid and inexpensive methodology for preconcentration and separation of trace metals from aqueous solutions has recently become an attractive area of research and an alternative to liquid-liquid extraction. Moreover, it provides results comparable to those obtained with other separation techniques and has a greater potential to be explored in improving detection limits and other analytical characteristics over other methods. A few reviews have been published covering different aspects of the CPE procedure and its relevant applications, such as the phenomenon of clouding, the application in the extraction of trace inorganic and organic materials, as well as pesticides and protein substrates from different sources, or incorporation of CPE into an FIA system. This review focuses on general properties of the most frequently used organic ligands in cloud-point extraction and on literature data (from 2000 to 2012) concerning the use of modern techniques in determination of metal ions' content in various materials. The article is divided according to the class of organic ligands to be used in CPE.