Determination of Organophosphorus Pesticides in Fortified Tomatoes by Fluorescence Quenching of Cadmium Selenium – Zinc Sulfide Quantum Dots

Adsorptive removal of organophosphate pesticides from aqueous solution using electrospun carbon nanofibers

Organophosphate pesticides (OPPs) are widely prevalent in the environment primarily due to their low cost and extensive use in agricultural lands. However, it is estimated that only about 5% of these applied pesticides reach their intended target organisms. The remaining 95% residue linger in the environment as contaminants, posing significant ecological and health risks. This underscores the need for materials capable of effectively removing, recovering, and recycling these contaminants through adsorption processes. In this research, adsorbent materials composed of electro-spun carbon nanofibers (ECNFs) derived from polyacrylonitrile was developed. The materials were characterized through several techniques, including scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier Transform Infrared Spectroscopy (FTIR), Brunauer-Emmett-Teller (BET) analysis, and contact angle measurements. SEM analysis revealed details of the structural properties and inter-fiber spacing variations of the carbon nanofibers. The results revealed that ECNFs possess remarkable uniformity, active surface areas, and high efficiency for adsorption processes. The adsorption studies were conducted using batch experiments with ethion pesticide in aqueous solution. High-Performance Liquid Chromatography-Diode Array Detector (HPLC-DAD) was utilized to quantify the concentrations of the OPP. Various parameters, including adsorbent dosage, pH, contact time, and initial ethion concentration, were investigated to understand their impact on the adsorption process. The adsorption isotherm was best described by the Freundlich model, while the kinetics of adsorption followed a non-integer-order kinetics model. The adsorption capacity of the ECNFs for OPP removal highlights a significant advancement in materials designed for environmental remediation applications. This study demonstrates the potential of ECNFs to serve as effective adsorbents, contributing to the mitigation of pesticide contamination in agricultural environments.

Highly Sensitive Fluorescence Detection of Three Organophosphorus Pesticides Based on Highly Bright DNA-Templated Silver Nanoclusters

It is still challenging to achieve simultaneous and sensitive detection of multiple organophosphorus pesticides (OPs). Herein, we optimized the ssDNA templates for the synthesis of silver nanoclusters (Ag NCs). For the first time, we found that the fluorescence intensity of T base-extended DNA-templated Ag NCs was over three times higher than the original C-riched DNA-templated Ag NCs. Moreover, a "turn-off" fluorescence sensor based on the brightest DNA-Ag NCs was constructed for the sensitive detection of dimethoate, ethion and phorate. Under strong alkaline conditions, the P-S bonds in three pesticides were broken, and the corresponding hydrolysates were obtained. The sulfhydryl groups in the hydrolyzed products formed Ag-S bonds with the silver atoms on the surface of Ag NCs, which resulted in the aggregation of Ag NCs, following the fluorescence quenching. The fluorescence sensor showed that the linear ranges were 0.1-4 ng/mL for dimethoate with a limit of detection (LOD) of 0.05 ng/mL, 0.3-2 µg/mL for ethion with a LOD of 30 ng/mL, and 0.03-0.25 µg/mL for phorate with a LOD of 3 ng/mL. Moreover, the developed method was successfully applied to the detection of dimethoate, ethion and phorate in lake water samples, indicating a potential application in OP detection.

Synthesis and application of quantum dots in detection of environmental contaminants in food: A comprehensive review

Environmental pollutants can accumulate in the human body through the food chain, which may seriously impact human health. Therefore, it is of vital importance to develop quick, simple, accurate and sensitive (respond quickly) technologies to evaluate the concentration of environmental pollutants in food. Quantum dots (QDs)-based fluorescence detection methods have great potential to overcome the shortcomings of traditional detection methods, such as long detection time, cumbersome detection procedures, and low sensitivity. This paper reviews the types and synthesis methods of QDs with a focus on green synthesis and the research progress on rapid detection of environmental pollutants (e.g., heavy metals, pesticides, and antibiotics) in food. Metal-based QDs, carbon-based QDs, and "top-down" and "bottom-up" synthesis methods are discussed in detail. In addition, research progress of QDs in detecting different environmental pollutants in food is discussed, especially, the practical application of these methods is analyzed. Finally, current challenges and future research directions of QDs-based detection technologies are critically discussed. Hydrothermal synthesis of carbon-based QDs with low toxicity from natural materials has a promising future. Research is needed on green synthesis of QDs, direct detection without pre-processing, and simultaneous detection of multiple contaminants. Finally, how to keep the mobile sensor stable, sensitive and easy to store is a hot topic in the future.

Ag-EDTA-Zr and Au-EDTA-Zr Nanocomposites for the Quantitative Determination of Some Organophosphate Pesticides in Water and Tomatoes

Background

Organophosphate pesticides (OP) pose risks to health and the environment, and monitoring them is an urgent task.

Objective

Development of a method for their determination in water and food.

Method

A simple photometric method for the determination of some OPs was demonstrated. Ag-EDTA-Zr and Au-EDTA-Zr nanoparticles were synthesized and were applied for the determination of some OPs (dimethoate, chlorpyrifos, and diazinon).

Results

It was demonstrated that silver nanoparticles provide more sensitivity in comparison to gold nanoparticles. As a result, Ag-EDTA-Zr nanoparticles were further applied for the determination of these pesticides in tomatoes.

Conclusions

The lowest detectable concentrations for dimethoate, diazinon, and chlorpyrifos in water reached 0.1 (SD 0.082), 0.4 (SD 0.075), and 0.4 mg/L (SD 0.088), respectively, whereas in tomato the lowest detectable concentrations for these pesticides were 0.5 (SD 0.789), 2 (SD 0.085), and 0.5 mg/L (SD 0.088). The sensitivity of detection in tomatoes is lower than in water; however, these concentrations are comparable with allowable concentrations of OP pesticides.

Highlights

A novel approach for quantitative detection of OPs was developed. Ag-EDTA-Zr and Au-EDTA-Zr nanocomposites interact with these pesticides, and, as a result, optical changes of these nanoparticles take place. These changes correlate with the concentration of pesticides.

Sensing beyond Senses: An Overview of Outstanding Strides in Architecting Nanopolymer-Enabled Sensors for Biomedical Applications

Nano-enabled sensing is an expanding interdisciplinary field of emerging science with dynamic multifunctional detecting capabilities, equipped with a wide range of multi-faceted nanomaterial having diverse dimensions and composition. They have proven to be highly robust, sensitive, and useful diagnostic tools ranging from advanced industrial processes to ordinary consumer products. As no single nanomaterial has proved to be unparalleled, recent years has witnessed a large number of nanomaterial-based sensing strategies for rapid detection and quantification of processes and substances with a high degree of reliability. Nano-furnished platforms, because of easy fabrication methods and chemical versatility, can serve as ideal sensing means through different transduction mechanisms. This article, through a unified experimental-theoretical approach, uses literature of recent years to introduce, evaluate, and analyze significant developments in the area of nanotechnology-aided sensors incorporating the various classes of nanomaterial. Addressing the broad interests, the work also summarizes the sensing mechanisms using schematic illustrations, attempts to integrate the performance of different categories of nanomaterials in the design of sensors, knowledge gaps, regulatory aspects, future research directions, and challenges of implementing such techniques in standalone devices. In view of a dependency of analysis and testing on sustained growth of sensor-supported platforms, this article inspires the scientific community for more attention in this field.

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Onsite/on-field analysis of pesticide and veterinary drug residues by a state-of-art technology: A review

Pesticides and veterinary drugs are generally employed to control pests and insects in crop and livestock farming. However, remaining residues are considered potentially hazardous to human health and the environment. Therefore, regular monitoring is required for assessing and legislation of pesticides and veterinary drugs. Various approaches to determining residues in various agricultural and animal food products have been reported. Most analytical methods involve sample extraction, purification (cleanup), and detection. Traditional sample preparation is time-consuming labor-intensive, expensive, and requires a large amount of toxic organic solvent, along with high probability for the decomposition of a compound before the analysis. Thus, modern sample preparation techniques, such as the quick, easy, cheap, effective, rugged, and safe method, have been widely accepted in the scientific community for its versatile application; however, it still requires a laboratory setup for the extraction and purification processes, which also involves the utilization of a toxic solvent. Therefore, it is crucial to elucidate recent technologies that are simple, portable, green, quick, and cost-effective for onsite and infield residue detections. Several technologies, such as surface-enhanced Raman spectroscopy, quantum dots, biosensing, and miniaturized gas chromatography, are now available. Further, several onsite techniques, such as ion mobility-mass spectrometry, are now being upgraded; some of them, although unable to analyze field sample directly, can analyze a large number of compounds within very short time (such as time-of-flight and Orbitrap mass spectrometry). Thus, to stay updated with scientific advances and analyze organic contaminants effectively and safely, it is necessary to study all of the state-of-art technology.

Analytical methods to analyze pesticides and herbicides

This paper reviews studies published in 2019, in the area of analytical techniques for determination of pesticides and herbicides. It should be noted that some of the reports summarized in this review are not directly related to but could potentially be used for water environment studies. Based on different methods, the literatures are organized into six sections, namely extraction methods, electrochemical techniques, spectrophotometric techniques, chemiluminescence and fluorescence methods, chromatographic and mass spectrometric techniques, and biochemical assays. PRACTITIONER POINTS: Totally 141 research articles have been summarized. The review is divided into six parts. Chromatographic and mass spectrometric techniques are the most widely used methods.

Ultrasensitive fluorescent detection of pesticides in real sample by using green carbon dots

Pesticides, widely used in modern agriculture, could potentially cause environmental pollution and affect human lives. Hence, the development of a highly sensitive sensing element to detect pesticide residues is crucial for food safety and ecosystem protection. Optical methods based on fluorescence properties provide an ideal approach for screening and quantification of these compounds in different medias including water, plant, and nutritional products. The development of fluorescence emitting carbon dot-based sensors for monitoring pesticides has attracted great attention in recent years. In comparison to other fluorophores, carbon dots have more promising optical features, higher quantum yields and better biocompatibility. This article aims to present a novel fluorescent sensing method of diazinon, glyphosate, and amicarbazone using plant-based carbon dots. A comprehensive characterization of carbon dots obtained from cauliflower was performed by methods including UV-visible, FTIR spectroscopy, fluorometry, AFM, DLS, and zeta sizer. Following this step, carbon dots were used to detect pesticides. The fluorescence quenching property of carbon dots has been utilized to identify detection limit of 0.25, 0.5, and 2 ng ml-1 for diazinon, amicarbazone, and glyphosate, respectively. Also, real sample study revealed that the detection of pesticides accompanied by our developed nano-sensor is repeatable and accurate. According to carbon dots specificity determination, the prepared nano sensor does not have the potential to identify "bromacil" and "dialen super" pesticides but the other three mentioned pesticides are detectable. The results confirm that synthesized green carbon dots are well qualified for application in food safety and environmental monitoring.