Determination of Tetracycline by Microdroplet Hydrodynamic Adsorptive Voltammetry Using a Multiwalled Carbon Nanotube Paste Rotating Disk Electrode

Validation of electrochemical device setup for detection of dual antibiotic drug release from hydrogel

Due to antimicrobial resistance that occurs throughout the world, antibiotic-releasing hydrogel with at least two drugs that synergistically treat stubborn bacteria is preferable for infection prevention. Hydrogel can serve as a drug reservoir to gradually release drugs in a therapeutic window to effectively treat microorganisms with minimal side effects. The study and development of drug releasing hydrogels requires a reliable, straightforward, cost-effective, fast, and low labor-intensive drug detection technique. In this study, we validate the electrochemical technique and device setup for real-time determination of dual antibacterial drugs released from a hydrogel. Concentrations of two representative antibacterial drugs, tetracycline (TC) and chloramphenicol (CAP), were determined using square wave voltammetry (SWV) mode that yields the lower limit of detection at 2.5 µM for both drugs. Measurement accuracy and repeatability were verified by 36 known drug combination concentrations. Capability in long-term measurement was confirmed by the measurement stability which was found to last for at least 72 h. Stirring was revealed as one of the significant factors for accurate real-time detection. Real-time measurement was ultimately performed to demonstrate the determination of multiple drug releases from a drug releasing hydrogel and validated by high-performance liquid chromatography (HPLC). All the results support that the electrochemical technique with the proposed device design and setup can be used to accurately and simultaneously determine dual drugs that are released from a hydrogel in real-time.

Bibliometrics Analysis of Research Progress of Electrochemical Detection of Tetracycline Antibiotics

Tetracycline is a broad-spectrum class of antibiotics. The use of excessive doses of tetracycline antibiotics can result in their residues in food, posing varying degrees of risk to human health. Therefore, the establishment of a rapid and sensitive field detection method for tetracycline residues is of great practical importance to improve the safety of food-derived animal foods. Electrochemical analysis techniques are widely used in the field of pollutant detection because of the simple detection principle, easy operation of the instrument, and low cost of analysis. In this review, we summarize the electrochemical detection of tetracycline antibiotics by bibliometrics. Unlike the previously published reviews, this article reviews and analyzes the development of this topic. The contributions of different countries and different institutions were analyzed. Keyword analysis was used to explain the development of different research directions. The results of the analysis revealed that developments and innovations in materials science can enhance the performance of electrochemical detection of tetracycline antibiotics. Among them, gold nanoparticles and carbon nanotubes are the most used nanomaterials. Aptamer sensing strategies are the most favored methodologies in electrochemical detection of tetracycline antibiotics.

Novel fluorescence sensor for the selective recognition of tetracycline based on molecularly imprinted polymer-capped N-doped carbon dots

A novel fluorescent probe based on molecularly imprinted polymers (MIPs) coupled with N-doped carbon dots (CDs) was prepared and used for specific recognition and sensitive determination of tetracycline (TC). N-doped CDs were synthesized using citric acid as a carbon source and ethylenediamine as a nitrogen source by a microwave assisted pyrolysis method. The determination conditions such as the solvents, material amount, pH value, and temperature were optimized. The CDs-MIPs have the best quenching on TC in water. The proposed method used for TC determination in milk powder samples had a detection limit of 0.054 μg mL-1 and a wide range of 0.5-30 μg mL-1. Meanwhile, satisfactory recoveries were obtained ranging from 95 to 108%. Oxytetracycline, chlorotetracycline and most of the coexisting substances showed no obvious interference indicating that the CDs-MIP probe exhibited high selectivity due to the presence of imprinted sites. Charge transfer from CDs-MIPs to TC may be through the mechanism of fluorescence quenching. This work gives a feasible strategy for the synthesis of N-doped carbon dot based molecularly imprinted polymers used as a fluorescent sensor in the food analysis field.

Recent development of antibiotic detection in food and environment: the combination of sensors and nanomaterials

In recent years, the abuse of antibiotics has led to the pollution of soil and water environment, not only poultry husbandry and food manufacturing will be influenced to different degree, but also the human body will produce antibody. The detection of antibiotic content in production and life is imperative. In this review, we provide comprehensive information about chemical sensors and biosensors for antibiotic detection. We classify the currently reported antibiotic detection technologies into chromatography, mass spectrometry, capillary electrophoresis, optical detection, and electrochemistry, introduce some representative examples for each technology, and conclude the advantages and limitations. In particular, the optical and electrochemical methods based on nanomaterials are discussed and evaluated in detail. In addition, the latest research in the detection of antibiotics by photosensitive materials is discussed. Finally, we summarize the pros and cons of various antibiotic detection methods and present a discussion and outlook on the expansion of cross-scientific areas. The synthesis and application of optoelectronic nanomaterials and aptamer screening are discussed and prospected, and the future trends and potential impact of biosensors in antibiotic detection are outlined.Graphical abstract.

How to Improve the Performance of Electrochemical Sensors via Minimization of Electrode Passivation

It follows from critical evaluation of possibilities and limitations of modern voltammetric/amperometric methods that one of the biggest obstacles in their practical applications in real sample analysis is connected with electrode passivation/fouling by electrode reaction products and/or matrix components. This review summarizes possibilities how to minimise these problems in the field of detection of small organic molecules and critically compares their potential and acceptability in practical laboratories. Attention is focused on simple and fast electrode surface renewal, the use of disposable electrodes just for one and/or few measurements, surface modification minimising electrode fouling, measuring in flowing systems, application of rotating disc electrode, the use of novel separation methods preventing access of passivating particles to electrode surface and the novel electrode materials more resistant toward passivation. An attempt is made to predict further development in this field and to stress the need for more systematic and less random research resulting in new measuring protocols less amenable to complications connected with electrode passivation.

One-step synthesis of a carbon dot-based fluorescent probe for colorimetric and ratiometric sensing of tetracycline

Carbon dots (CDs) with blue fluorescence were synthesized using indole-3-butyric acid and l-tryptophan using a one-step hydrothermal method. The CDs were further employed as a fluorescent sensor with high selectivity for colorimetric and ratiometric detection of tetracycline (TC) in water. The limit of detection (LOD) was found to be 0.33 μM for TC with R² = 0.98387. Besides, the CDs could be applied in practical water samples and showed good recovery.

A novel fluorescence probe for rapid and sensitive detection of tetracyclines residues based on silicon quantum dots

A novel rapid and sensitive fluorescence probe based on silicon quantum dots (Si QDs) fluorescence was fabricated for selective detection of tetracyclines (TCs) residues. Si QDs were innovatively prepared via facile One-Pot Solvent-Free Method and characterized by TEM, FT-IR, UV absorption, fluorescence, XPS and XRD. In aqueous solution, Cu²⁺ and Si QDs complexed together and the fluorescence of Si QDs quenched (static quenching) to a certain extent. TCs can be early in binding to Cu²⁺ and prevent Si QDs fluorescence quenching. As a consequence, quantitative screening of TCs can be achieved. The assay is highly selective for TCs. Represented by chlortetracycline (CTC), a member of TCs, under optimized conditions, good linear relationship in the range of 11.32-1086.72 nM was obtained, and the detection limit (LOD; S/N ratio = 3) of this assay for CTC is 0.92 nM. It was successfully applied to the determination of CTC in spiked bee honey and total TCs in actual honey samples. And the evaluation of selectivity, reproducibility and stability of the probe were favorable. These results demonstrated that the presented fluorescent probe can be a promising sensing platform for TCs analysis.

New application of Mn-doped ZnS quantum dots: phosphorescent sensor for the rapid screening of chloramphenicol and tetracycline residues

In this work, a new application of Mn-doped ZnS quantum dots (Mn-ZnS QDs) was developed to screen chloramphenicol (CAP) and tetracycline (TC) residues simply and rapidly. Mn-ZnS QDs synthesized by a hydration method and modified by l-cysteine for better stability emit phosphorescence at 583 nm with the excitation wavelength at 289 nm. Based on the overlap of the Mn-ZnS QDs excitation spectra and CAP or TCs ultraviolet spectra, the excited light of the Mn-ZnS QDs was partially absorbed by CAP or TCs owing to the inner-filter effect (IFE), leading to a decrease in the phosphorescence intensity. The phosphorescence intensities of the samples prepared by mixing different TCs and CAP were in good agreement with the expected results from adding a single antibiotic sample. Therefore, the total molar concentrations of CAP and TCs could be screened based on the linear equation of a single standard substance. Represented by tetracycline (TC), as a member of the tetracycline family, under optimized conditions, showed a good linear relational concentration range over 4 orders of magnitude from 50 to 1.5 × 105 nM with a limit of detection (LOD; S/N ratio = 3) down to 8.6 nM. The phosphorescent sensor was also used to detect total TCs in actual samples successfully. The evaluations of the recovery rate and selectivity were good. These results demonstrated that the presented phosphorescent sensor can be a simple and rapid screening platform for CAP and TCs.

Fabrication of ultra-sensitive photoelectrochemical aptamer biosensor: Based on semiconductor/DNA interfacial multifunctional reconciliation via 2D-C3N4

In this work, we fabricate a novel bismuth vanadate/two dimensional-carbon nitride/deoxyribonucleic acid (BiVO₄/2D-C₃N₄/DNA) aptamer photoelectrochemical (PEC) sensor, and this sensor provides a record detection sensitivity area (5 × 10^-7 μg/L - 10 μg/L) for Microcystin-LR (MC-LR). Meanwhile, except for MC-LR detection, this sensor presents highly sensitivity for tumor marker, heavy metal ion, antibiotic also by changing the DNA aptamer. Photo charge dynamic and theory calculation results reveal that 2D-C₃N₄ is a key material for multifunctional interface reconciliation of this PEC aptamer sensor. Firstly, it can serve as photogenerated hole oriented-transfer medium from the BiVO₄ photoanode to the detective target; In addition, 2D-C₃N₄ with large area of π electron cloud can fix the DNA aptamer parallelly by π-π bonding with the nucleic acid in the DNA aptamer to shorten the hole transfer distance from the semiconductor to target. So that, a record MC-LR detection sensitivity has been achieved by the 2D-C₃N₄ modified BiVO₄/DNA aptamer sensor.