Preparation of an L-Cysteine Functionalized Magnetic Nanosorbent for the Sensitive Quantification of Heavy Metal Ions in Food by Graphite Furnace Atomic Absorption Spectrometry

Development of a vortex-assisted switchable-hydrophilicity solvent-based liquid phase microextraction for fast and reliable extraction of Zn (II), Fe (II), Pb (II), and Cd (II) from various baby food products

This manuscript describes the development of a novel liquid phase microextraction (LPME) method for the extraction and determination of Zn (II), Fe (II), Pb (II), and Cd (II) in various infant/baby food and supplements products. The method is based on vortex-assisted extraction combined with a switchable-hydrophilicity solvent (SHS) sample preparation. The SHS, which undergoes reversible phase changes triggered by pH change, enables selective extraction and easy phase separation. A flame atomic absorption spectroscopy was used in the final determination step. Optimization studies revealed, that the optimal pH of the sample solution (after digestion) during analytes extraction is 5.5. A l-proline is added to the sample (375 mM) to ensure the complexation of the target metal cations. After the complexation step, 750 µL of SHS - a N, N-Dimethylcyclohexylamine along with 0.9 mL of 2 M of acetic acid solution is added (hydrophilicity switch-on stage) and mixed manually to obtain a homogeneous solution. In the last stage, 0.45 mL of 10 M NaOH solution (hydrophilicity switch-off stage) is added to the sample solution and a vortex for 100 s is applied to ensure the effective extraction and separation of the complex containing the analytes. At this stage, a cloudy solution is immediately obtained. Finally, the effective phase separation is obtained at the centrifugation step (4000 rpm for 2 mins). The method limit of detection was as 0.03, 0.009, 0.6, and 0.2 ng/L for Zn (II), Fe (II), Cd (II), and Pb (II) respectively with RSD% below 2.0 %. The analysis of certified reference materials and real samples proved the full applicability of the method for routine analysis, contributing to the field of heavy metal analysis and ensuring the safety of baby products. According to the AGREE methodology, this method can be named as green analytical chemistry method with a score of 0.77.

Effects of Toxic Heavy Metal Salts on Oxidative Quality Deterioration in Ground Pork Model during Aerobic Display Storage

The contamination of toxic heavy metals in meat production and processing can cause the oxidative deterioration of processed meat products. Aside from the possible mechanisms of toxic heavy metals on pro-oxidative reaction, little is known about the potential impacts of toxic heavy metal contamination on meat quality attributes within permitted maximum residual levels. Therefore, the objective of this study was to determine the influence of the intentional contamination of toxic heavy metals on the oxidative deterioration in ground pork models during aerobic display storage. Four types of toxic heavy metal salts (As2O3, CdCl2, K2Cr2O7, and Pb(NO3)2) were mixed with ground pork at two different levels (maximum residue limit and its half level), PVC-wrapped, and displayed in a 4 °C showcase equipped with continuous fluorescent natural white light (1400 l×, color temperature = 6500 K). The contamination of toxic heavy metals significantly decreased the redness of ground pork, and rapidly increased the hue angle. The contamination of Cd and Cr equivalent to maximum residue levels (0.05 and 1.0 mg/kg, respectively) could increase the formation of peroxides, 2-thiobarbituric acid reactive substances, and carbonyls, along with an immediate decrease in total reducing activity. However, there was no difference in protein thiol content between treatments (p > 0.05). These results indicate that contamination of certain toxic heavy metals, particularly Cd and Cr, would accelerate discoloration, lipid oxidation, and carbonyl formation of ground pork during aerobic storage.

Microfluidic sensor integrated with nanochannel liquid conjunct Ag/AgCl reference electrode for trace Pb(II) measurement

Pollution due to heavy metals is becoming increasingly hazardous; therefore, demand for the large-scale deployment of sensor nodes for water quality monitoring has increased. The development of integrated and miniaturised sensors for detecting heavy metals is necessary. Herein, an integrated microfluidic sensor based on a "glass-silicon-glass" sandwich structure is proposed for Pb²⁺ detection. This micro-sensor consists of a nanochannel liquid conjunct Ag/AgCl reference electrode(RE), a working electrode with a three-dimensional Au micropillar array, and a detection chamber for sample measurement. The potential fluctuation of the RE in this sensor was only 0.62% over seven days, remaining relatively stable. Under optimal conditions, the limit of detection and sensitivity for lead were 0.13 μg L^-1 (S/N = 3) and 52.30 nA (μg L^-1)^-1, respectively. The linearity of the sensor for detecting lead was good in the concentration range of 0.50-150 μg L^-1 (R² = 0.9989). Moreover, the proposed microsensor showed high selectivity for Pb²⁺ and achieved sensitive detection of trace Pb²⁺ in different water samples. Therefore, this integrated and miniaturised sensor is a practical tool for trace lead detection, allowing the development of large scale sensor network for water monitoring.