Novel Optical Measurement Approach for the Quantitation of Liposome Immunomigration Assays

Time-resolved luminescent lateral flow assay technology

We here report a detection technology that integrates highly sensitive time-resolved luminescence technique into lateral flow assay platform to achieve excellent detection performance with low cost. We have developed very bright, surface-functionalized and mono-dispersed phosphorescent nanoparticles of long lifetime under ambient conditions. The phosphorescent nanoparticles have been used to conjugate with monoclonal antibody for C-reactive protein (CRP), an inflammatory biomarker. Lateral flow immunoassay devices have been developed using the conjugate for highly sensitive detection of CRP. The CRP assay can achieve a detection sensitivity of <0.2 ngmL(-1) in serum with a linear response from 0.2 to 200 ngmL(-1) CRP. We have also developed a low cost time-resolved luminescence reader for the lateral flow immunoassay (LFIA) devices. The reader does not use expensive band pass filter and still provide very low detection background and high detection sensitivity on solid substrates such as nitrocellulose membranes. The reader can detect less than 2.5 ng phosphorescent particles captured on a nitrocellulose membrane strip with more than three orders of magnitude linear detection dynamic range. The technology should find a number of applications, ranging from clinical diagnostics, detection of chemical and biological warfare agents, to food and environmental monitoring.

Characterization of dynamically prepared phospholipid-modified reversed-phase columns

We have modified a reversed-phase (RP8) column by passing through it an aqueous solution of phosphatidylcholine-based liposomes. The phospholipids from the liposomes adsorb onto the octyl chain of the stationary phase, thus altering the nature of the stationary phase and of the chromatographic interactions. The properties of the phospholipid-modified column were investigated using solutes belonging to several chemical classes. We found that the retention factors of negatively and positively charged solutes decreased as the amount of phospholipid in the column was increased. For the solutes studied here the extent of the decrease was smaller for the positive solutes. With neutral solutes, the retention factors of some (benzenediols) increased markedly while with others (ketones) the retention factors decreased. The selectivities between the various solutes on the phospholipid-modified column were different than on the original reversed-phase column. The retention behavior of the solutes can be explained in terms of (1) effective shielding of the hydrophobic part of the stationary phase by the polar head groups of the phospholipids and (2) hydrogen bond formation between the solutes and the carbonyl oxygens as well as the non-ester phosphate oxygens in the polar head groups of the phospholipids.

Development of a new immunosensor for pesticide detection: a disposable system with liposome-enhancement and amperometric detection

The development of a disposable amperometric immunomigration sensor for the detection of triazine pesticides in real samples is presented. Thick film electrodes printed on PVC were used as strip-type transducers. Monoclonal antibodies against atrazine and terbutylazine served as biorecognition element. For the generation and amplification of the signal, hapten-tagged liposomes entrapping ascorbic acid as a marker molecule were chosen. A capillary gap and a wicking filter membrane strip served as migration zone. For signal detection on a graphite electrode, liposomes were lysed by Triton X-100 and the released ascorbic acid was quantified at a potential of + 300 mV vs printed Ag/AgCl. Signal response time was 1-3 min, and sensitivity of measurements in tap water was below 1 microgram l-1 of atrazine and terbutylazine. Atrazine determinations in soil extracts correlated well with standard procedures based on ELISA and HPLC.

Multianalyte detection using a capillary-based flow immunosensor

A highly sensitive, dual-analyte detection system using capillary-based immunosensors has been designed for explosive detection. This model system consists of two capillaries, one coated with antibodies specific for 2,4,6-trinitrotoluene (TNT) and the other specific for hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) combined into a single device. The fused silica capillaries are prepared by coating anti-TNT and anti-RDX antibodies onto the silanized inner walls using a hetero-bifunctional crosslinker. After immobilization, the antibodies are saturated with a suitable fluorophorelabeled antigen. A "T" connector is used to continuously flow the buffer solution through the individual capillaries. To perform the assay, an aliquot of TNT or RDX or a mixture of the two analytes is injected into the continuous flow stream. In each capillary, the target analyte displaces the fluorophore-labeled antigen from the binding pocket of the antibody. The labeled antigen displaced from either capillary is detected downstream using two portable spectrofluorometers. The limits of detection for TNT and RDX in the multi-analyte formate are 44 fmol (100 microliters of 0.1 ng/ml TNT solution) and 224 fmol (100 microliters of 0.5 ng/ml RDX solution), respectively. The entire assay for both analytes can be performed in less than 3 min.