Micro3D: computer program for three-dimensional reconstruction visualization, and analysis of neuronal populations and barin regions

Divergent and point-to-point connections in the commissural pathway between the inferior colliculi

The commissure of the inferior colliculus interconnects the left and right sides of the auditory midbrain and provides the final opportunity for interaction between the two sides of the auditory pathway at the subcortical level. Although the functional properties of the commissure are beginning to be revealed, the topographical organization of its connections is unknown. A combination of neuroanatomical tracing studies, 3D reconstruction, and neuronal density maps was used to study the commissural connections in rat. The results demonstrate that commissural neurons in the central nucleus of the inferior colliculus send a divergent projection to the equivalent frequency-band laminae in the central nucleus and dorsal and lateral cortices on the opposite side. The density of this projection, however, is weighted toward a point that matches the position of the tracer injection; consistent with a point-to-point emphasis in the wiring pattern. In the dorsal cortex of the inferior colliculus there may be two populations of neurons that project across the commissure, one projecting exclusively to the frequency-band laminae in the central nucleus and the other projecting diffusely to the dorsal cortex. Neurons in the lateral cortex of the inferior colliculus make only a very weak contribution to the commissural pathway. The point-to-point pattern of connections permits interactions between specific regions of corresponding frequency-band laminae, whereas the divergent projection pattern could subserve integration across the lamina. J. Comp. Neurol. 514:226–239, 2009. © 2009 Wiley-Liss, Inc.

Topography of the complete corticopontine projection: from experiments to principal Maps

The mammalian brain is characterized by orderly spatial distribution of its cellular components, commonly referred to as topographical organization. The topography of cortical and subcortical maps is thought to represent functional or computational properties. In the present investigation, we have studied map transformations and organizing principles in the projections from the cerebral cortex to the pontine nuclei, with emphasis on the mapping of the cortex as a whole onto the pontine nuclei. Following single or multiple axonal tracer injections into different cortical regions, three-dimensional (3-D) distributions of anterogradely labeled axons in the pontine nuclei were mapped. All 3-D reconstructed data sets were normalized to a standardized local coordinate system for the pontine nuclei and uploaded in a database application (FACCS, Functional Anatomy of the Cerebro-Cerebellar System, available via The Rodent Brain Workbench, http://www.rbwb.org). The database application allowed flexible use of the data in novel combinations, and use of a previously published data sets. Visualization of different combinations of data was used to explore alternative principles of organization. As a result of these analyses, a principal map of the topography of corticopontine projections was developed. This map followed the organization of early spatiotemporal gradients present in the cerebral cortex and the pontine nuclei. With the principal map for corticopontine projections, a fairly accurate prediction of pontine target area can be made for any site of origin in the cerebral cortex. The map and the underlying shared data sets represent a basis for modeling of topographical organization and structure-function relationships in this system.

Toward a workbench for rodent brain image data systems architecture and design

We present a novel system for storing and manipulating microscopic images from sections through the brain and higher-level data extracted from such images. The system is designed and built on a three-tier paradigm and provides the research community with a web-based interface for facile use in neuroscience research. The Oracle relational database management system provides the ability to store a variety of objects relevant to the images and provides the framework for complex querying of data stored in the system. Further, the suite of applications intimately tied into the infrastructure in the application layer provide the user the ability not only to query and visualize the data, but also to perform analysis operations based on the tools embedded into the system. The presentation layer uses extant protocols of the modern web browser and this provides ease of use of the system. The present release, named Functional Anatomy of the Cerebro-Cerebellar System (FACCS), available through The Rodent Brain Workbench (http:// rbwb.org/), is targeted at the functional anatomy of the cerebro-cerebellar system in rats, and holds axonal tracing data from these projections. The system is extensible to other circuits and projections and to other categories of image data and provides a unique environment for analysis of rodent brain maps in the context of anatomical data. The FACCS application assumes standard animal brain atlas models and can be extended to future models. The system is available both for interactive use from a remote web-browser client as well as for download to a local server machine.

Novel applications of common stereology software to represent the complete distribution, density and spatial organization of anterogradely labelled fibers in neuroanatomical tract-tracing studies

In a recent study we have adapted for the first time available software used in spatial neuronal organization studies to represent the complete fiber distribution of a brain projection [Leite-Almeida H, Valle-Fernandes A, Almeida A. Brain projections from the medullary dorsal reticular nucleus: an anterograde and retrograde tracing study in the rat. Neuroscience 2006;140:577-95]. Here we describe the technique in detail using the injection of biotinylated-dextran amine (BDA) in the rat cuneate nucleus and its projection through the pyramidal decussation as an example. Camera-lucida-like computer drawings were produced with StereoInvestigator software. Using high magnification lens, rat brain sections were screened and lines superimposed with virtually all fibers and terminal boutons present in each brain section. Additionally, in each screening field of the section, all focal planes were inspected and lines depicted only on focused fibers and/or fiber segments. Later, NeuroExplorer software was used to interpret fiber depth information and obtain the three-dimensional pathway of each fiber bundle along the rostrocaudal extension of each section. This computer methodology presents several advantages over classical camera-lucida hand-made drawings: (i) the software is prepared to work interchangeably in different magnifications without misplacements, which allows the representation of virtually all labelled fibers and, therefore, results in a much more accurate fiber location in each brain section; (ii) three-dimensional information of all individual fibers and fiber bundles is recorded; (iii) the method is more flexible allowing, for example, to colour differently labelled fibers according to their profiles (e.g. terminal or ramified fiber arborizations and terminal boutons).

Topographical organization of pathways from somatosensory cortex through the pontine nuclei to tactile regions of the rat cerebellar hemispheres

The granule cell layer of the cerebellar hemispheres contains a patchy and noncontinuous map of the body surface, consisting of a complex mosaic of multiple perioral tactile representations. Previous physiological studies have shown that cerebrocerebellar mossy fibre projections, conveyed through the pontine nuclei, are mapped in registration with peripheral tactile projections to the cerebellum. In contrast to the fractured cerebellar map, the primary somatosensory cortex (SI) is somatotopically organized. To understand better the map transformation occurring in cerebrocerebellar pathways, we injected axonal tracers in electrophysiologically defined locations in Sprague-Dawley rat folium crus IIa, and mapped the distribution of retrogradely labelled neurons within the pontine nuclei using three-dimensional (3-D) reconstructions. Tracer injections within the large central upper lip patch in crus IIa-labelled neurons located centrally in the pontine nuclei, primarily contralateral to the injected side. Larger injections (covering multiple crus IIa perioral representations) resulted in labelling extending only slightly beyond this region, with a higher density and more ipsilaterally labelled neurons. Combined axonal tracer injections in upper lip representations in SI and crus IIa, revealed a close spatial correspondence between the cerebropontine terminal fields and the crus IIa projecting neurons. Finally, comparisons with previously published three-dimensional distributions of pontine neurons labelled following tracer injections in face receiving regions in the paramedian lobule (downloaded from http://www.rbwb.org) revealed similar correspondence. The present data support the coherent topographical organization of cerebro-ponto-cerebellar networks previously suggested from physiological studies. We discuss the present findings in the context of transformations from cerebral somatotopic to cerebellar fractured tactile representations.

The NeuARt II system: a viewing tool for neuroanatomical data based on published neuroanatomical atlases

Background

Anatomical studies of neural circuitry describing the basic wiring diagram of the brain produce intrinsically spatial, highly complex data of great value to the neuroscience community. Published neuroanatomical atlases provide a spatial framework for these studies. We have built an informatics framework based on these atlases for the representation of neuroanatomical knowledge. This framework not only captures current methods of anatomical data acquisition and analysis, it allows these studies to be collated, compared and synthesized within a single system.

Results

We have developed an atlas-viewing application ('NeuARt II') in the Java language with unique functional properties. These include the ability to use copyrighted atlases as templates within which users may view, save and retrieve data-maps and annotate them with volumetric delineations. NeuARt II also permits users to view multiple levels on multiple atlases at once. Each data-map in this system is simply a stack of vector images with one image per atlas level, so any set of accurate drawings made onto a supported atlas (in vector graphics format) could be uploaded into NeuARt II. Presently the database is populated with a corpus of high-quality neuroanatomical data from the laboratory of Dr Larry Swanson (consisting 64 highly-detailed maps of PHAL tract-tracing experiments, made up of 1039 separate drawings that were published in 27 primary research publications over 17 years). Herein we take selective examples from these data to demonstrate the features of NeuArt II. Our informatics tool permits users to browse, query and compare these maps. The NeuARt II tool operates within a bioinformatics knowledge management platform (called 'NeuroScholar') either as a standalone or a plug-in application.

Conclusion

Anatomical localization is fundamental to neuroscientific work and atlases provide an easily-understood framework that is widely used by neuroanatomists and non-neuroanatomists alike. NeuARt II, the neuroinformatics tool presented here, provides an accurate and powerful way of representing neuroanatomical data in the context of commonly-used brain atlases for visualization, comparison and analysis. Furthermore, it provides a framework that supports the delivery and manipulation of mapped data either as a standalone system or as a component in a larger knowledge management system.

Database and tools for analysis of topographic organization and map transformations in major projection systems of the brain

Integration of dispersed and complicated information collected from the brain is needed to build new knowledge. But integration may be hampered by rigid presentation formats, diversity of data formats among laboratories, and lack of access to lower level data. We have addressed some of the fundamental issues related to this challenge at the level of anatomical data, by producing a coordinate based digital atlas and database application for a major projection system in the rat brain: the cerebro-ponto-cerebellar system. This application, Functional Anatomy of the Cerebro-Cerebellar System in rat (FACCS), is available via the Rodent Brain WorkBench (http://www.rbwb.org). The data included are x,y,z-coordinate lists describing exact distributions of tissue elements (axonal terminal fields of axons, or cell bodies) that are labeled with axonal tracing techniques. All data are translated to a common local coordinate system to facilitate across animal comparison. A search capability allows queries based on, e.g. location of tracer injection sites, tracer category, size of the injection sites, and contributing author. A graphic search tool allows the user to move a volume cursor inside a coordinate system to detect particular injection sites having connections to a specific tissue volume at chosen density levels. Tools for visualization and analysis of selected data are included, as well as an option to download individual data sets for further analysis. With this application, data and metadata from different experiments are mapped into the same information structure and made available for re-use and re-analysis in novel combinations. The application is prepared for future handling of data from other projection systems as well as other data categories.