Molecular dynamics study of anisotropic behaviours of water droplet on textured surfaces with various energies

Proportional scaling molecular dynamics simulations of the wetting experiments of water droplets on ink-patterned printing paper

In experiments, printing paper is imprinted with three different ink micropatterns (square, grid, and stripe). The wetting contact angle of water droplets on a heterogeneous surface is then investigated using a proportionate scaling molecular dynamics (MD) simulation, where the water droplets and the ink-patterned printing paper are both shrunk by a factor of 200 000 collectively. The errors from the theoretical values are always less than 1°, which is much less than the bias of experimental measurement data, according to the modeling contact angles. It has been demonstrated that this proportionate scaling approach works well to appropriately explain the interaction between micro-/nanostructures and liquids.

Design of Nanostructured Surfaces for Efficient Condensation by Controlling Condensation Modes

To meet the different needs of various industrial fields, it is of great application value to find a feasible method for controlling the condensation mode on the surface. Inspired by biological surfaces, tuning the surface structure and wettability is considered as a potential way to control the surface condensation behavior. Herein, the coupling effect of the geometric parameters and wettability distribution of the surface on the condensation process has been investigated systematically at the nanoscale. The results illustrate that the condensation mode is primarily determined by the nanopillar wettability when the nanopillars are densely distributed, while the substrate wettability dominates the condensation mode when the nanopillars are sparsely distributed. Besides, the effective contact area fraction is proposed, which more accurately reflects the influence of geometric parameters on the condensation rate of the nanopillar surface at the nanoscale. The condensation rate of the nanopillar surface increases with the increase of the effective contact area fraction. Furthermore, three surface design methods are summarized, which can control the condensation mode of water vapor on the surface into the dropwise condensation mode that generates Cassie-Baxter droplets, and this condensation process is very attractive for many practical applications.

Flow Condensation Heat Transfer Characteristics of Nanochannels with Nanopillars: A Molecular Dynamics Study

Flow condensation in nanochannels is a high-efficiency method to deal with increasingly higher heat flux from micro/nanoelectronic devices. Here, we study the flow condensation heat transfer characteristics of nanochannels with different nanopillar cross-sectional areas and heights using molecular dynamics simulation. Results show that two phases containing vapor in the middle of the channel and liquid near walls can be distinguished by obvious interfaces when the fluid is at a stable state. The condensation performance can be promoted by adding nanopillars. With the increase in nanopillar cross-sectional areas or heights, the time that the fluid spends to reach stability will be put off, while the condensation performance enhances. Different from the small enhancement of nanopillar cross-sectional areas, the condensation heat transfer performance improves significantly at a higher nanopillar height, which increases the heat transfer rates by 11.6 and 35.8% when heights are 6a and 8a, respectively. The preeminent condensation heat transfer performance is ascribed to the fact that nanopillars with a higher height disturb the vapor-liquid interface and vapor region, which not only allows vapor atoms with strong Brownian motion to collide with nanopillar atoms directly but also increases deviations of vapor-liquid potential energy to facilitate condensation heat transfer in nanochannels.

Dependencies of Surface Condensation on the Wettability and Nanostructure Size Differences

When changing surface wettability and nanostructure size, condensation behavior displays distinct features. In this work, we investigated evaporation on a flat hydrophilic surface and condensation on both hydrophilic and hydrophobic nanostructured surfaces at the nanoscale using molecular dynamics simulations. The simulation results on hydrophilic surfaces indicated that larger groove widths and heights produced more liquid argon atoms, a quicker temperature response, and slower potential energy decline. These three characteristics closely relate to condensation areas or rates, which are determined by groove width and height. For condensation heat transfer, when the groove width was small, the change of groove height had little effect, while change of groove height caused a significant variation in the heat flux with a large groove width. When the cold wall was hydrophobic, the groove height became a significant impact factor, which caused no vapor atoms to condense in the groove with a larger height. The potential energy decreased with the increase of the groove height, which demonstrates a completely opposing trend when compared with hydrophilic surfaces.