Chitosan cryogel microspheres decorated with silver nanoparticles as injectable and antimicrobial scaffolds

Antibiotic delivery in the presence of green AgNPs using multifunctional bilayer carrageenan nanofiber/sodium alginate nanohydrogel for rapid control of wound infections

This study constructed bilayer nano-hydrogels using solvent casting and electrospinning techniques. The first layer consisted of a hydrogel containing sodium alginate and gellan gum, while the second layer was a carrageenan/polyvinyl alcohol nanofibrous membrane. The nanohydrogels were prepared with different doses of doxycycline antibiotic (0.12, 0.06, 0.03 g) and a fixed amount of silver nanoparticles (0.012 g), which were synthesized using the green method including Capparis spinosa leaf extract. The films were tested for their mechanical properties, swelling behavior, XRD, and FTIR, and their morphology was characterized using SEM. The biological properties of the nanohydrogels were also extensively assayed. X-ray diffraction analysis showed peak 111 for silver nanoparticles. Incorporating silver nanoparticles significantly enhanced nanohydrogels' mechanical and antibacterial properties and improved their ability to heal wounds. Nanohydrogels exhibited biodegradability, biocompatibility, anti-inflammatory properties (57.63 %), and high cell viability (>85 %) in laboratory conditions. The study confirmed that wound dressings containing doxycycline with controlled release are highly effective against pathogenic bacteria and prevent the formation of biofilms (92 %). The rats in-vivo study demonstrated that 100 % wound closure was achieved in nanohydrogels containing SA/GG/PVA/CAR/AgNPs/DOX0.12 after 14 days. The films could potentially lead to the development of new treatments against bacterial infections and inflammatory conditions of wounds.

Potential use of extracted flax seed mucilage in the construction of macroporous cryo-scaffolds

Mucilage is a natural source of polysaccharides that has recently attracted attention for use in biomaterial production. It attracts attention with its easy and fast extraction, biocompatibility, high water retention capacity, and biodegradability. Although there are studies on the characterization of mucilage obtained from different plant sources, the interaction of this polymer with other polymers and its potential to form new biomaterials have not yet been sufficiently investigated. Based on this, in this study, the potential of mucilage extracted from flaxseed for the production of cryogels for tissue engineering applications was demonstrated. Firstly, yield, basic physicochemical properties, morphology, and surface charge-dependent isoelectric point determination studies were carried out for the characterization of the extracted mucilage. The successful preparation of mucilage was evaluated for the construction of cryo-scaffolds and 3D, spongy, and porous structures were obtained in the presence of chitosan and polyvinyl alcohol polymers. A heterogeneous morphology with interconnected macro and micro porosity in the range of approximately 85-115 m pore diameter was exhibited. Due to the high hydrophilic structure of the mucilage, which is attached to the structure with weak hydrogen bonds, the contact angle values of the scaffolds were obtained below 80° and they showed the ability to absorb 1000 times their dry weight in approximately 30 min. As a preliminary optimization study for the evaluation of mucilage in cryogel formation, this work introduced a new construct to be developed as wound dressing scaffold for deep and chronic wounds.

Preparation and Characterization of Biodegradable Sponge-like Cryogel Particles of Chitosan via the Inverse Leidenfrost (iLF) Effect

Chitosan-based cryogel particles were synthesized using the inverse Leidenfrost (iLF) effect, with glutaraldehyde employed as the cross-linker. The resulting cryogels exhibited a sponge-like morphology with micrometer-sized interconnected pores and demonstrated resilience, withstanding up to three compression-release cycles. These characteristics highlight the potential of chitosan cryogels for diverse applications, including adsorption and biomedical uses. We further investigated the influence of varying acetic acid concentrations on the properties of the chitosan cryogels. Our findings revealed that the particle size distribution of the cryogels ranged from 1300 to 2900 μm. As the concentration of acetic acid increased, the swelling degree of the chitosan cryogels decreased, stabilizing at an approximate value of around 6 at 0.03 mol of acetic acid. Additionally, the shift in the absorption peak of the OH and free amino groups from 3261 to 3404 cm-1 confirmed the cross-linking reaction between chitosan and glutaraldehyde.

Evaluation of reproducible cryogel preparation based on automated image analysis using deep learning

Cryogels represent a class of porous sponge-like materials possessing unique properties including high-fidelity reproduction of tissue structure and maximized permeability. Their architecture is mainly based on an interconnected network of macropores that provides sufficient stability while allowing the movement of substances through the material. In most cryogel applications, the pore size is very important, especially when the material is used as a 3D scaffold for tissue culture, applied as a filter, or utilized as a membrane. In this study, poly(dimethylacrylamide-co-2-hydroxyethyl methacrylate) cryogels have been prepared by two preparation methods to investigate the reproducibility of homogeneous pore structures and pore sizes. Automated image analysis algorithms were developed to rapidly evaluate cryogel pore sizes based on scanning electron microscopy (SEM) images. The quantification approach contained a unique combination of classical and deep learning-based algorithms. To validate the accuracy of the two models, we compared the results obtained from automated SEM image analysis with those from manual pore size determinations and mercury intrusion porosimetry (MIP) measurements. Effect sizes were calculated to compare the results from manual and automated pore size measurements for the cryogel reproducibility series. 81% of the values obtained revealed only trivial differences, which strongly suggests that automated image analysis can reliably substitute the manual evaluation of cryogel pore sizes. The use of an adapted reactor setup yielded cryogels with heterogeneous morphologies in the absence of recognizable pore structures. With the conventional cryogel preparation using plastic syringes, the obtained cryogels represented highly reproducible morphologies and pore sizes in the range between 17 and 22 μm. Calculated effect sizes within the cryogel replicate series revealed only trivial differences between the obtained pore sizes in 83.5% or 99.4% of the data (classical approach and deep learning-based approach, respectively).

Scaffolds in the microbial resistant era: Fabrication, materials, properties and tissue engineering applications

Due to microbial infections dramatically affect cell survival and increase the risk of implant failure, scaffolds produced with antimicrobial materials are now much more likely to be successful. Multidrug-resistant infections without suitable prevention strategies are increasing at an alarming rate. The ability of cells to organize, develop, differentiate, produce a functioning extracellular matrix (ECM) and create new functional tissue can all be controlled by careful control of the extracellular microenvironment. This review covers the present state of advanced strategies to develop scaffolds with antimicrobial properties for bone, oral tissue, skin, muscle, nerve, trachea, cardiac and other tissue engineering applications. The review focuses on the development of antimicrobial scaffolds against bacteria and fungi using a wide range of materials, including polymers, biopolymers, glass, ceramics and antimicrobials agents such as antibiotics, antiseptics, antimicrobial polymers, peptides, metals, carbon nanomaterials, combinatorial strategies, and includes discussions on the antimicrobial mechanisms involved in these antimicrobial approaches. The toxicological aspects of these advanced scaffolds are also analyzed to ensure future technological transfer to clinics. The main antimicrobial methods of characterizing scaffolds’ antimicrobial and antibiofilm properties are described. The production methods of these porous supports, such as electrospinning, phase separation, gas foaming, the porogen method, polymerization in solution, fiber mesh coating, self-assembly, membrane lamination, freeze drying, 3D printing and bioprinting, among others, are also included in this article. These important advances in antimicrobial materials-based scaffolds for regenerative medicine offer many new promising avenues to the material design and tissue-engineering communities.

•

Antibacterial, antifungal and antibiofilm scaffolds.

•

Antimicrobial scaffold fabrication techniques.

•

Antimicrobial biomaterials for tissue engineering applications.

•

Antimicrobial characterization methods of scaffolds.

•

Bone, oral tissue, skin, muscle, nerve, trachea, cardiac, among other applications.

Antimicrobial cryogel dressings towards effective wound healing

Cryogels are macroporous hydrogels that have been widely utilized in a variety of biomedical applications including wound dressings. Cryogels reveal superior mechanical and swelling properties as well as large and interconnected porosity. As traditional hydrogel wound dressings generally show undesirable mechanical and swelling characteristics, cryogels, due to their toughness and superfast swelling, offer an outstanding platform to address the growing number of various types of wounds. Moreover, recently, cryogel wound dressings loaded with an antimicrobial agent emerged as a feasible option to reduce infection, and thus improve the wound healing process. However, a comprehensive review of antimicrobial cryogels as a wound dressing is still lacking in the literature. In this review, we summarize the progress of cryogels in the area of wound dressings and provide an overview of the various polymers, namely, natural and synthetic which have been employed in cryogel wound dressing preparation. Furthermore, the most prominent antimicrobial agents incorporated in cryogel wound dressings are provided. Finally, the future directions of cryogel wound dressings for wound healing are also discussed.

Bioactive Chitosan-Based Organometallic Scaffolds for Tissue Engineering and Regeneration

Captivating achievements in developing advanced hybrid biostructures through integrating natural biopolymers with inorganic materials (e.g., metals and metalloids) have paved the way towards the application of bioactive organometallic scaffolds (OMSs) in tissue engineering and regenerative medicine (TERM). Of various biopolymers, chitosan (CS) has been used widely for the development of bioactive OMSs, in large part due to its unique characteristics (e.g., biocompatibility, biodegradability, surface chemistry, and functionalization potential). In integration with inorganic elements, CS has been used to engineer advanced biomimetic matrices to accommodate both embedded cells and drug molecules and serve as scaffolds in TERM. The use of the CS-based OMSs is envisioned to provide a new pragmatic potential in TERM and even in precision medicine. In this review, we aim to elaborate on recent achievements in a variety of CS/metal, CS/metalloid hybrid scaffolds, and discuss their applications in TERM. We also provide comprehensive insights into the formulation, surface modification, characterization, biocompatibility, and cytotoxicity of different types of CS-based OMSs.

Antimicrobial Action of Biocompatible Silver Microspheres and Their Role in the Potential Treatment of Fungal Keratitis

Silver nanoparticles have drawn considerable attention as excellent antimicrobial agents because of their characteristics, including broad antimicrobial spectrum, durable antimicrobial property, and large specific surface area. However, the toxicity of silver nanoparticles limits the in vivo application in the antimicrobial therapy field. Here, we developed a novel silver-based biomaterial to achieve favorable biocompatibility as well as enhanced antimicrobial activity. Silver microspheres (AgMPs) were synthesized using bovine serum albumin as a template and H₂O₂ as an activator. Electron microscopy results showed that AgMPs had a honeycombed inner structure with an approximate diameter of 800 nm. The minimum inhibitory concentration results exhibited that AgMPs had effective antimicrobial action against bacteria and fungi when the concentration was greater than 32 and 16 μg/mL, respectively. The cell proliferation results suggested that AgMPs have no influence on corneal epithelial cell growth when the concentration was under 25 μg/mL. The in vivo antifungal therapy experiments demonstrated that 25 μg/mL AgMPs could effectively combat Candida smooth wound infections. Overall, AgMPs exhibited substantial antimicrobial action on fungi in addition to biosafety on corneal epithelial cells at a concentration within 16-25 μg/mL. Our study shows that AgMPs can be used as an ocular surface drop candidate to treat fungal keratitis.

Injectable Cryogels in Biomedicine

Cryogels are interconnected macroporous materials that are synthesized from a monomer solution at sub-zero temperatures. Cryogels, which are used in various applications in many research areas, are frequently used in biomedicine applications due to their excellent properties, such as biocompatibility, physical resistance and sensitivity. Cryogels can also be prepared in powder, column, bead, sphere, membrane, monolithic, and injectable forms. In this review, various examples of recent developments in biomedical applications of injectable cryogels, which are currently scarce in the literature, made from synthetic and natural polymers are discussed. In the present review, several biomedical applications of injectable cryogels, such as tissue engineering, drug delivery, therapeutic, therapy, cell transplantation, and immunotherapy, are emphasized. Moreover, it aims to provide a different perspective on the studies to be conducted on injectable cryogels, which are newly emerging trend.