Moxifloxacin-loaded electrospun polymeric composite nanofibers-based wound dressing for enhanced antibacterial activity and healing efficacy

Dual Drug-Loaded Coaxial Nanofiber Dressings for the Treatment of Diabetic Foot Ulcer

Introduction

Diabetes mellitus is frequently associated with foot ulcers, which pose significant health risks and complications. Impaired wound healing in diabetic patients is attributed to multiple factors, including hyperglycemia, neuropathy, chronic inflammation, oxidative damage, and decreased vascularization.

Rationale

To address these challenges, this project aims to develop bioactive, fast-dissolving nanofiber dressings composed of polyvinylpyrrolidone loaded with a combination of an antibiotic (moxifloxacin or fusidic acid) and anti-inflammatory drug (pirfenidone) using electrospinning technique to prevent the bacterial growth, reduce inflammation, and expedite wound healing in diabetic wounds.

Results

The fabricated drug-loaded fibers exhibited diameters of 443 ± 67 nm for moxifloxacin/pirfenidone nanofibers and 488 ± 92 nm for fusidic acid/pirfenidone nanofibers. The encapsulation efficiency, drug loading and drug release studies for the moxifloxacin/pirfenidone nanofibers were found to be 70 ± 3% and 20 ± 1 µg/mg, respectively, for moxifloxacin, and 96 ± 6% and 28 ± 2 µg/mg, respectively, for pirfenidone, with a complete release of both drugs within 24 hours, whereas the fusidic acid/pirfenidone nanofibers were found to be 95 ± 6% and 28 ± 2 µg/mg, respectively, for fusidic acid and 102 ± 5% and 30 ± 2 µg/mg, respectively, for pirfenidone, with a release rate of 66% for fusidic acid and 80%, for pirfenidone after 24 hours. The efficacy of the prepared nanofiber formulations in accelerating wound healing was evaluated using an induced diabetic rat model. All tested formulations showed an earlier complete closure of the wound compared to the controls, which was also supported by the histopathological assessment. Notably, the combination of fusidic acid and pirfenidone nanofibers demonstrated wound healing acceleration on day 8, earlier than all tested groups.

Conclusion

These findings highlight the potential of the drug-loaded nanofibrous system as a promising medicated wound dressing for diabetic foot applications.

Anti-adhesive and antibacterial chitosan/PEO nanofiber dressings with high breathability for promoting wound healing

Wound dressings are crucial for wound healing. Ideal wound dressings should possess many functions such as wettability, antibacterial activity and anti-adherent property to promote wound healing. In the present study solution blown spinning (SBS) technology was applied to prepare chitosan/polyethylene oxide (CS/PEO) nanofiber dressings in high efficiency. The obtained nanofiber dressings were treated with anhydrous ethanol to improve the fiber structure and enhance the functionality of the fiber dressings. The results show that the treated nanofibers had higher crystallinities and higher CS contents. The CS/PEO nanofiber dressings fabricated by using no additives and crosslinking had excellent wettability, water stability and antibacterial activity against Escherichia coli and Staphylococcus aureus reached to over 99.99 %. In addition, the CS/PEO nanofiber dressings exhibited high breathability, antioxidant activity and anti-adhesion function. The in vivo animal experiment confirmed that the nanofiber dressings enhanced cell proliferation and significantly accelerated the wound healing within 10 days. The developed CS/PEO nanofiber dressings have great potential in the clinical field of wound healing.

A bilayer mupirocin/bupivacaine-loaded wound dressing based on chitosan/poly (vinyl alcohol) nanofibrous mat: Preparation, characterization, and controlled drug release

An infected skin wound caused by external injury remains a serious challenge. Electrospun drug-loaded nanofibers with antibacterial properties based on biopolymers have been widely explored for wound healing. In this study, the double-layer CS/PVA/mupirocin (CPM) + CS/PVA/bupivacaine (CPB) mats were prepared by electrospinning method (20 % polymer weight) and then crosslinked with glutaraldehyde (GA) to optimize the water-resistant and biodegradation properties for wound dressing applications. The morphology of mats was characterized as defect-free and interconnected nanofibers by Scanning Electron Microscope (SEM) and Atomic Force Microscopy (AFM). Fourier Transform Infrared Spectrometry (FTIR) analysis also assessed the chemical structural properties. The porosity, surface wettability, and swelling degree of the dual-drug loaded mats were improved by about 20 %, 12°, and 200 % of the CS/PVA sample to provide a moist environment for efficient wound breathing and repairing. This highly porous mat facilitated the wound exudates absorption and air permeability excellently, reducing the chance of bacterial infections by inhibiting the growth of S. aureus bacterial colonies with a zone of 71.3 mm diameter. In vitro drug release results showed a high-burst release of 80 % and a continuous release profile for bupivacaine and mupirocin, respectively. MTT assay and in vivo tests indicated >90 % of cell viability and improvement in cell proliferation. It triply accelerated wound closure compared to the control group, reaching nearly full closure after 21 days as a potential clinical wound treatment.

Marine Biopolymers as Bioactive Functional Ingredients of Electrospun Nanofibrous Scaffolds for Biomedical Applications

Marine biopolymers, abundantly present in seaweeds and marine animals, feature diverse structures and functionalities, and possess a wide range of beneficial biological activities. Characterized by high biocompatibility and biodegradability, as well as unique physicochemical properties, marine biopolymers are attracting a constantly increasing interest for the development of advanced systems for applications in the biomedical field. The development of electrospinning offers an innovative technological platform for the production of nonwoven nanofibrous scaffolds with increased surface area, high encapsulation efficacy, intrinsic interconnectivity, and structural analogy to the natural extracellular matrix. Marine biopolymer-based electrospun nanofibrous scaffolds with multifunctional characteristics and tunable mechanical properties now attract significant attention for biomedical applications, such as tissue engineering, drug delivery, and wound healing. The present review, covering the literature up to the end of 2021, highlights the advancements in the development of marine biopolymer-based electrospun nanofibers for their utilization as cell proliferation scaffolds, bioadhesives, release modifiers, and wound dressings.

Nanoengineered therapeutic scaffolds for burn wound management

BACKGROUND

Wound healing is a complex process, and selecting an appropriate treatment is crucial and varies from one wound to another. Among injuries, burn wounds are more challenging to treat. Different dressings and scaffolds come into play when skin is injured. These scaffolds provide the optimum environment for wound healing. With the advancements of nanoengineering, scaffolds have been engineered to improve wound healing with lower fatality rates.

OBJECTIVES

Nanoengineered systems have emerged as one of the promising candidates for burn wound management. This review paper aims to provide an in-depth understanding of burn wounds and the role of nanoengineering in burn wound management. The advantages of nanoengineered scaffolds, their properties, and their proven effectiveness have been discussed. Nanoparticles and nanofibers-based nanoengineered therapeutic scaffolds provide optimum protection, infection management, and accelerated wound healing due to their unique characteristics. These scaffolds increase cell attachment and proliferation for desired results.

RESULTS

The literature review suggested that the utilization of nanoengineered scaffolds has accelerated burn wound healing. Nanofibers provide better cell attachment and proliferation among different nanoengineered scaffolds due to their 3D structure mimics the body's extracellular matrix.

CONCLUSION

With the application of these advanced nanoengineered scaffolds, better burn wound management is possible due to sustained drug delivery, better cell attachment, and an infection-free environment.

Fabrication of moxifloxacin HCl-loaded biodegradable chitosan nanoparticles for potential antibacterial and accelerated cutaneous wound healing efficacy

AIM

This work aims to formulate topical hybrid gel containing chitosan-coated moxifloxacin (MXF) HCl nanoparticles (NPs) with enhanced antibacterial and healing activity.

METHODS

MXF HCl NPs prepared by the ionic gelation method were loaded onto a hybrid chitosan carbomer gel. Size analysis of the prepared NPs was performed using SEM and Zeta-sizer. Further characterisation was done using Fourier transforms infra-red spectroscopy (FTIR), X-ray diffraction (XRD), and Thermogravimetric analysis (TGA). Prepared gel was evaluated for its in vitro drug release, biocompatibility, antibacterial activity, and stability studies under storage conditions. In-vivo wound healing was measured by observing percentage reduction in wound.

RESULTS

NPs have 359 ± 79 nm mean particle size, 31.01 mV zeta potential with 0.008 polydispersity index (PD1), 63.5% drug entrapment and 83 ± 3.5% drug release at pH 5.5. Hybrid chitosan carbomer gel showed good biocompatibility, antibacterial, in-vivo wound healing properties and stable properties.

CONCLUSIONS

NP-loaded hybrid gel can be an effective treatment for acute and challenged topical wounds.

Fabrication of Antimicrobial Multilayered Nanofibrous Scaffolds-Loaded Drug via Electrospinning for Biomedical Application

Nanofibers prepared by biobased materials are widely used in the field of biomedicine, owing to outstanding biocompatibility, biodegradable characters, and excellent mechanical behavior. Herein, we fabricated multilayered nanofibrous scaffolds in order to improve the performance of drug delivery. The composite layer-by-layer scaffolds were incorporated by hydrophobic poly(l-lactic acid) (PLA): polycaprolactone (PCL) and hydrophilic poly(vinyl alcohol) (PVA) nanofibers via multilayer electrospinning. Morphological and structural characteristics of the developed scaffolds measured by scanning electron microscopy (SEM), and transmission electron microscopy (TEM) confirmed smooth and uniform fibers ranging in nanometer scale. The differences in contact angles and Fourier transform infrared spectrum (FTIR) between single-layered PVA nanofibers and multilayered scaffolds verified the existence of PLA: PCL surface. In vitro biodegradable and drug release analysis depicted multilayered scaffolds had good biodegradability and potential for medical application. Due to the model drug incorporation, scaffolds exhibited good antibacterial activity against Escherichia coli and Staphylococcus aureus by the zone of inhibition test. These results revealed that the multilayered scaffolds were proved to be desirable antibacterial materials for biomedical application.

Enhanced solubility and biopharmaceutical performance of atorvastatin and metformin via electrospun polyvinylpyrrolidone-hyaluronic acid composite nanoparticles

The study was aimed to improve the aqueous solubility of atorvastatin (AT) and ameliorate permeability of metformin (MT) in a combination formulation, improving their oral bioavailability. Several AT-MT loaded polyvinylpyrrolidone (PVP) and hyaluronic acid (HA) based nanoparticles were prepared through electrospraying method (ES-NPs), and tested for physicochemical, in vitro, and in vivo parameters. Among the trialed formulations, a sample consisting of AT, MT, PVP, and HA at the weight ratio of 1/6.25/3.75/15 furnished the most satisfying solubility and release rate results. It enhanced approximately 10.3-fold and 3.6-fold solubility of AT as compared with AT powder and marketed product (Lipilow) in phosphate buffer pH = 6.8, respectively. Whereas, permeation of MT was 1.60-fold and 1.47-fold improved as compared with MT powder and marketed product (Glucophage), respectively. As compared with Lipilow, AUC _(0-∞) and C_max of AT with ES-NPs in rats were improved to 3.6-fold and 3.2-fold, respectively. Similarly, as compared with Glucophage, AUC _(0-∞) and C_max of MT were improved to 2.3-fold and 1.8-fold, respectively. Thus, ES-NPs significantly enhanced the solubility of AT (a BCS class II drug) and permeability of MT (a BCS class III drug) and might be a promising drug delivery system for co-delivery of these drugs.