Microwave methods for the synthesis of gold(III) complexes

Gold(III), Mercury(II), and Palladium(II) Complexes of a Series of Isomeric Bis(mono- and dialkoxyphenyl)pyridines: Introduction of Gold through Transmetalation and Catalysis

A series of isomeric bis-2,6-(monoalkoxyphenyl)pyridine and bis-2,6-(dialkoxyphenyl)pyridine ligands were synthesized and characterized. In order to prepare their chlorogold(III) complexes, intermediate chloromercury(II) complexes were first prepared, but unlike observations from previous studies where they were obtained impure and at best in moderate yield, here pure complexes were synthesized, many in rather high yields. Depending on the substitution pattern of the alkoxy chains on the ligands, mono- and/or dimercurated complexes were obtained, characterized by 1H, 13C{1H}, and 199Hg NMR spectroscopy as well as, in several cases, by X-ray crystallography. Factors that may explain this unusual reactivity are discussed. In most cases, transmetalation to the related chlorogold(III) complex proceeded smoothly, although lower yields were obtained when starting from doubly mercurated precursors. Prompted by the propensity of these ligands to mercurate, attempts were made to effect direct auration, but none was successful. However, dimeric, orthometalated complexes of palladium(II) could be prepared and were also amenable to transmetalation to the chlorogold(III) complex, providing for a mercury-free synthesis.

Cyclometalated (N,C) Au(III) Complexes: The Impact of Trans Effects on Their Synthesis, Structure, and Reactivity

ConspectusThe early years of gold catalysis were dominated by Au(I) complexes and inorganic Au(III) salts. Thanks to the development of chelating ligands, more sophisticated Au(III) complexes can now be easily prepared and handled. The choice of the ancillary ligand has great consequences for the synthesis, properties, and reactivity of the Au(III) complex in question. Among the major factors controlling reactivity are the "trans effect" and the "trans influence" that a ligand imparts at the ligand trans to itself. The kinetic trans effect manifests itself with an increased labilization of the ligand trans to a given ligand and arises from an interplay between ground-state and transition-state effects. The term trans influence, on the other hand, is a ground-state effect only, describing the tendency of a given ligand to weaken the metal-ligand bond trans to itself. Herein, we will use the term "trans effect" to describe both the kinetic and the thermodynamic properties, whereas the term "trans influence" will refer only to thermodynamic properties. We will describe how these trans effects strongly impact the chemistry of the commonly encountered cyclometalated (N,C) Au(III) complexes, a class of complexes we have studied for more than a decade. We found that the outcome of reactions like alkylation, arylation, and alkynylation as well as halide metathesis are dictated by the different trans influence of the two termini of the chelating tpy ligand in (tpy)Au(OAcF)2 (tpy = 2-(p-tolyl)pyridine, OAcF = OCOCF3, tpy-C > tpy-N). There is a strong preference for high trans influence ligands to end up trans to tpy-N, whereas the lower trans influence ligands end up trans to tpy-C. Taking advantage of these preferences, tailor-made (N,C)Au(III) complexes could be prepared. For the functionalization of alkenes at (tpy)Au(OAcF)2, the higher trans effect of tpy-C would suggest that the coordination site trans to tpy-C would be kinetically more available than the one trans to tpy-N. However, due to the thermodynamic preference of having the σ-bonded ligand, resulting from the nucleophilic addition to alkenes, trans to tpy-N, functionalization of alkenes was only observed trans to tpy-N. However, for a catalytic process, the reaction should happen trans to tpy-C, as was observed for the trifluoroacetoxylation of acetylene. When functionalizing acetylene in the coordination site trans to tpy-N, protolytic cleavage of the Au-C(vinyl) bond to release the product did not occur at all, whereas trans to tpy-C protolytic cleavage of the Au-C(vinyl) bond occurred readily, in agreement with the higher trans influence of tpy-C over tpy-N. The large impact of the trans effects in Au(III) complexes is finally exemplified with the synthesis of [(tpy)Au(π-allyl)]+[NTf2]-, which resulted in a highly asymmetric π + σ bonding of the allyl moiety. Here, the bonding is such that the most thermodynamically favorable situation is achieved, with the carbon trans to tpy-N bonded in a σ-fashion and the π-allyl double bond being coordinated trans to tpy-C.

Au(III) Cyclometallated Compounds with 2-Arylpyridines and Their Derivatives or Analogues: 34 Years (1989–2022) of NMR and Single Crystal X-ray Studies

A review paper on Au(III) cyclometallated compounds with 2-arylpyridines (2-phenylpyridine, 2-benzylpyridine, 2-benzoylpyridine, 2-phenoxypyridine, 2-phenylsulfanylpyridine, 2-anilinopyridine, 2-(naphth-2-yl)pyridine, 2-(9,9-dialkylfluoren-2-yl)pyridines, 2-(dibenzofuran-4-yl)pyridine, and their derivatives) and their analogues (2-arylquinolines, 1- and 3-arylisoquinolines, 7,8-benzoquinoline), with 113 references. A total of 554 species, containing κ2-N(1),C(6′)*-Au(III), or analogous moiety (i.e., chelated by nitrogen of the pyridine-like ring and the deprotonated ortho- carbon of the phenyl-like ring) and, thus, possessing a character intermediate between metal complexes and organometallics, studied in the years 1989–2022 by NMR spectroscopy and/or single crystal X-ray diffraction (207 X-ray structures), are described. The compounds for which biological or catalytic activity and the luminescence properties were studied are also quoted.

On the mercuration, palladation, transmetalation and direct auration of a C^N^C pincer ligand

The C^N^C ligand 2,6-bis(2,3-dialkoxyphenyl)pyridine forms dimercury and orthopalladated complexes, both of which may be transmetallated to gold(III) complexes; the gold complexes may also be formed directly in a Rh(III)-catalysed process, hence it is possible to circumvent the use of organomercury intermediates in the synthesis of this important class of compound.

Microwave-Assisted Synthesis: Can Transition Metal Complexes Take Advantage of This “Green” Method?

Microwave-assisted synthesis is considered environmental-friendly and, therefore, in agreement with the principles of green chemistry. This form of energy has been employed extensively and successfully in organic synthesis also in the case of metal-catalyzed synthetic procedures. However, it has been less widely exploited in the synthesis of metal complexes. As microwave irradiation has been proving its utility as both a time-saving procedure and an alternative way to carry on tricky transformations, its use can help inorganic chemists, too. This review focuses on the use of microwave irradiation in the preparation of transition metal complexes and organometallic compounds and also includes new, unpublished results. The syntheses of the compounds are described following the group of the periodic table to which the contained metal belongs. A general overview of the results from over 150 papers points out that microwaves can be a useful synthetic tool for inorganic chemists, reducing dramatically the reaction times with respect to traditional heating. This is often accompanied by a more limited risk of decomposition of reagents or products by an increase in yield, purity, and (sometimes) selectivity. In any case, thermal control is operative, whereas nonthermal or specific microwave effects seem to be absent.

Synthesis of substituted (N,C) and (N,C,C) Au(III) complexes: the influence of sterics and electronics on cyclometalation reactions

Cyclometalated Au(III) complexes are of interest due to their catalytic, medicinal, and photophysical properties. Herein, we describe the synthesis of derivatives of the type (N,C)Au(OAc^F)₂ (OAc^F = trifluoroacetate) and (N,C,C)AuOAc^F by a cyclometalation route, where (N,C) and (N,C,C) are chelating 2-arylpyridine ligands. The scope of the synthesis is explored by substituting the 2-arylpyridine core with electron donor or acceptor substituents at one or both rings. Notably, a variety of functionalized Au(III) complexes can be obtained in one step from the corresponding ligand and Au(OAc)₃, eliminating the need for organomercury intermediates, which is commonly reported for similar syntheses. The influence of substituents in the ligand backbone on the resulting complexes was assessed using DFT calculations, ¹⁵N NMR spectroscopy and single-crystal X-ray diffraction analysis. A correlation between the electronic properties of the (N,C) ligands and their ability to undergo cyclometalation was found from experimental studies combined with natural charge analysis, suggesting the cyclometalation at Au(III) to take place via an electrophilic aromatic substitution-type mechanism. The formation of Au(III) pincer complexes from tridentate (N,C,C) ligands was investigated by synthesis and DFT calculations, in order to assess the feasibility of C(sp³)-H bond activation as a synthetic pathway to (N,C,C) cyclometalated Au(III) complexes. It was found that C(sp³)-H bond activation is feasible for ligands containing different alkyl groups (isopropyl and ethyl), although the C-H activation is less energetically favored compared to a ligand containing tert-butyl groups.

Main Avenues in Gold Coordination Chemistry

In this contribution, we provide an overview of the main avenues that have emerged in gold coordination chemistry during the last years. The unique properties of gold have motivated research in gold chemistry, and especially regarding the properties and applications of gold compounds in catalysis, medicine, and materials chemistry. The advances in the synthesis and knowledge of gold coordination compounds have been possible with the design of novel ligands becoming relevant motifs that have allowed the preparation of elusive complexes in this area of research. Strong donor ligands with easily modulable electronic and steric properties, such as stable singlet carbenes or cyclometalated ligands, have been decisive in the stabilization of gold(0) species, gold fluoride complexes, gold hydrides, unprecedented π complexes, or cluster derivatives. These new ligands have been important not only from the fundamental structure and bonding studies but also for the synthesis of sophisticated catalysts to improve activity and selectivity of organic transformations. Moreover, they have enabled the facile oxidative addition from gold(I) to gold(III) and the design of a plethora of complexes with specific properties.

Design, physico-chemical characterization and in vitro biological activity of organogold(III) glycoconjugates

To develop new metal-based glycoconjugates as potential anticancer agents, four organometallic gold(iii)-dithiocarbamato glycoconjugates of the type [AuIII(2-Bnpy)(SSC-Inp-GlcN)](PF6) (2-Bnpy: 2-benzylpyridine; Inp: isonipecotic moiety; GlcN: amino-glucose scaffold; Au3-Au6) and the corresponding model non-glycosylated counterparts [AuIII(2-Bnpy)(SSC-Inp-R)](PF6) (R: OEt (Au1), NH2 (Au2)) have been generated and characterized by means of several analytical techniques (elemental analysis, FT-IR, 1H-/13C-NMR, ESI-MS, UV-Vis, X-ray crystallography). Their stability under physiologically-relevant conditions (PBS solution) and n-octanol/PBS distribution coefficient (D7.4) have also been evaluated. Gold(iii) glycoconjugates showed an antiproliferative effect against ovarian carcinoma A2780 cells, with GI50 values in the low micromolar range. Remarkably, their cell growth inhibitory effect increases upon the addition of a glucose transporter 1 (GLUT1) inhibitor, thus ruling out the involvement of GLUT1 in their transport inside the cell. Additional mechanistic studies have been carried out in A2780 cells, supporting the hypothesis of a facilitated diffusion mechanism (possibly mediated by glucose transporters other than GLUT1), and revealing their capability to act as topoisomerase I and II inhibitors and to disrupt mitochondrial membrane integrity, leading to the generation of ROS, thus resulting in the promotion of oxidative stress and, eventually, cell death.

Studies on gold(I) and gold(III) alcohol functionalised NHC complexes

Five pairs of novel chiral alcohol functionalised gold(i) and gold(iii) NHC complexes derived from chiral amino alcohols, were synthesized and characterised (NMR, IR, HRMS). Single crystal X-ray diffraction data of gold(i) and gold(iii) complexes are reported and discussed. The chiral imidazolium preligands were readily synthesized via the oxalamides, subsequent reduction and final orthoformate condensation. An improved method was used for generation of gold(i) NHC complexes (up to 92%) and further oxidation afforded the corresponding gold(iii) NHC complexes (up to 99%). All the Au(i) and Au(iii) NHC complexes proved far more catalytically active in a 1,6-enyne alkoxycyclization test reaction than our previously tested N,N- and P,N-ligated Au(iii) complexes. Comparative gold(i) and gold(iii) catalytic studies demonstrated different catalytic ability, depending on the NHC ligand flexibility and bulkiness. Excellent yields (92-99%) of target alkoxycyclization product were obtained with both gold(i) and gold(iii) complexes with the bulky N1-Mes-N2-ethanol based NHC ligand.

Tetradentate Gold(III) Complexes as Thermally Activated Delayed Fluorescence (TADF) Emitters: Microwave-Assisted Synthesis and High-Performance OLEDs with Long Operational Lifetime

Structurally robust tetradentate gold(III)-emitters have potent material applications but are rare and unprecedented for those displaying thermally activated delayed fluorescence (TADF). Herein, a novel synthetic route leading to the preparation of highly emissive, charge-neutral tetradentate [C^C^N^C] gold(III) complexes with 5-5-6-membered chelate rings has been developed through microwave-assisted C-H bond activation. These complexes show high thermal stability and with emission origin (³ IL, ³ ILCT, and TADF) tuned by varying the substituents of the C^C^N^C ligand. With phenoxazine/diphenylamine substituent, we prepared the first tetradentate gold(III) complexes that are TADF emitters with emission quantum yields of up to 94 % and emission lifetimes of down to 0.62 μs in deoxygenated toluene. These tetradentate Au^III TADF emitters showed good performance in vacuum-deposited OLEDs with maximum EQEs of up to 25 % and LT₉₅ of up to 5280 h at 100 cd m^-2 .

Alternative Technologies That Facilitate Access to Discrete Metal Complexes

Organometallic complexes: these two words jump to the mind of the chemist and are directly associated with their utility in catalysis or as a pharmaceutical. Nevertheless, to be able to use them, it is necessary to synthesize them, and it is not always a small matter. Typically, synthesis is via solution chemistry, using a round-bottom flask and a magnetic or mechanical stirrer. This review takes stock of alternative technologies currently available in laboratories that facilitate the synthesis of such complexes. We highlight five such technologies: mechanochemistry, also known as solvent-free chemistry, uses a mortar and pestle or a ball mill; microwave activation can drastically reduce reaction times; ultrasonic activation promotes chemical reactions because of cavitation phenomena; photochemistry, which uses light radiation to initiate reactions; and continuous flow chemistry, which is increasingly used to simplify scale-up. While facilitating the synthesis of organometallic compounds, these enabling technologies also allow access to compounds that cannot be obtained in any other way. This shows how the paradigm is changing and evolving toward new technologies, without necessarily abandoning the round-bottom flask. A bright future is ahead of the organometallic chemist, thanks to these novel technologies.

Towards blue emitting monocyclometalated gold(iii) complexes – synthesis, characterization and photophysical investigations

The electronic properties of cyclometalating ligands and ancillary ligands were successfully tailored to achieve blue emission in monocyclometalated gold(iii) complexes.

Harnessing White-Light Luminescence via Tunable Singlet-and Triplet-Derived Emissions Based on Gold(III) Complexes

White light emitting gold(III) complexes were synthesized by tuning the percentage of metal dπ contribution in the charge transfer. This was achieved through specific tailoring of the ligand scaffold, which led to increase in the HOMO π-energy properties, resulting in a decrease of efficiency on the intersystem crossing (ISC). As a consequence, monomolecular based singlet- and triplet-derived emission covering the entire visible spectrum with quantum yield up to 28 % and CIE-1931 chromaticity coordinates of (0.29, 0.33) to (0.32, 0.40) could be obtained. Furthermore, two complexes displayed excitation-dependent emission property due to hyper-ISC allowing the regulation of the ratio between fluorescence versus phosphorescence intensity and accomplish precise tuning of white light emission.

Au(iii)-aryl intermediates in oxidant-free C-N and C-O cross-coupling catalysis

Au(iii)-aryl species have been crystallographically isolated as reactive intermediates in oxidant-free C–O and C–N cross coupling processes, using aromatic and aliphatic alcohols and amines, as well as water and amides, as nucleophiles.

Au(iii)-aryl species have been unequivocally identified as reactive intermediates in oxidant-free C–O and C–N cross coupling catalysis. The crystal structures of cyclometalated neutral and cationic Au(iii) species are described and their key role in 2 electron-redox Au(i)/Au(iii) catalysis in C–O and C–N cross couplings is shown. Nucleophiles compatible with Au-catalyzed cross couplings include aromatic and aliphatic alcohols and amines, as well as water and amides.

Regioselectivity in C-H activation: reagent control in cyclometallation of 2-(1-naphthyl)-pyridine

2-(1-Naphthyl)-pyridine () possesses sp(2) C-H bonds in both the γ- and δ-positions and is therefore a suitable substrate for studying the cyclometallation selectivity with different reagents and conditions. Such selectivity studies are reported. Based on deuterium-exchange experiments it is concluded that cycloruthenation with RuCl2(p-cymene) dimer is reversible with kinetic and thermodynamic preference for γ-substitution. Electrophilic cycloborylation, on the other hand, shows unusual δ-substitution. The previously published cyclopalladation and cycloauration of the substrate was studied in detail and was shown to be irreversible; they proceed under kinetic control and give γ- and δ-substitution for palladium and gold, respectively.

Cyclometalated (boroxinato)gold(iii) complexes from arrested transmetalation

Luminescent metallaboroxines of gold(iii) form in self-assembly reactions from trifluoroacetato precursors and alkyl or arylboronic acids.

Cyclometallated gold(iii) aryl-pyridine complexes as efficient catalysts for three-component synthesis of substituted oxazoles

Cyclometallated gold(iii) complexes efficiently catalyze the multicomponent reaction between imines, alkynes, and acyl chlorides to form trisubstituted oxazoles.

Activation of aryl halides at gold(I): practical synthesis of (P,C) cyclometalated gold(III) complexes

Taking advantage of phosphine chelation, direct evidence for oxidative addition of Csp(2)-X bonds (X = I, Br) to a single gold atom is reported. NMR studies and DFT calculations provide insight into this unprecedented transformation, which gives straightforward access to stable (P,C) cyclometalated gold(III) complexes.