Synthesis and characterization of ternary metallic oxide electrodes containing (SnO2)93Sb5M2 (M = Ce, ta, Bi, Gd) using an ionic liquid as the precursor solvent

Impact of different anode materials on electro-Fenton process and tannery wastewater treatment using sequential electro-Fenton and electrocoagulation

The influence of anode materials on the electrochemical treatment of tannery wastewater (TWW) was evaluated using Pt, Ti/RuO₂-IrO₂ (DSA), Ti/SnO₂-Sb, Ti/PbO₂, and Ti/SnO₂-Sb/PbO₂ electrodes. The comparison of the degradation mechanism of these electrodes in the electro-Fenton (EF) treatment was evaluated. The Ti/SnO₂-Sb/PbO₂ anode was efficient, with high electrocatalytic activity, stability, and reproducibility of the degradation results. Further, the study was extended to define the ability of sequential EF and electrocoagulation (EC) processes to clean TWW. The EC treatment was conducted using Al electrodes, and the performance of the combined treatment was evaluated by the removal of chemical oxygen demand (COD), turbidity, total suspended solids (TSS), sulfide, and Cr removal. The role of chlorides and sulfate salts during both treatments was evaluated by monitoring the concentration changes of these anions during the whole treatment using ion chromatography (IC). A sequential 1.5 h EF and 1 h EC treatment were applied to achieve a satisfactory degradation of (81.2 ± 3.9)% COD, >98% Cr, >99% turbidity, TSS, and sulfide removal. Additionally, the combined treatment was found to be more efficient towards the COD removal, achieving about 22.5% higher COD removal consuming almost the same amount of electrical energy.

Research trends in the development of anodes for electrochemical oxidation of wastewater

The review focuses on the recent development in anode materials and their synthesis approach, focusing on their compatibility for treating actual industrial wastewater, improving selectivity, electrocatalytic activity, stability at higher concentration, and thereby reducing the mineralization cost for organic pollutant degradation. The advancement in sol–gel technique, including the Pechini method, is discussed in the first section. A separate discussion related to the selection of the electrodeposition method and its deciding parameters is also included. Furthermore, the effect of using advanced heating approaches, including microwave and laser deposition synthesis, is also discussed. Next, a separate discussion is provided on using different types of anode materials and their effect on active •OH radical generation, activity, and electrode stability in direct and indirect oxidation and future aspects. The effect of using different synthesis approaches, additives, and doping is discussed separately for each anode. Graphene, carbon nanotubes (CNTs), and metal doping enhance the number of active sites, electrochemical activity, and mineralization current efficiency (MCE) of the anode. While, microwave or laser heating approaches were proved to be an effective, cheaper, and fast alternative to conventional heating. The electrodeposition and nonaqueous solvent synthesis were convenient and environment-friendly techniques for conductive metallic and polymeric film deposition.