Effective green corrosion inhibition of aluminium using analgin in acidic medium: an experimental and theoretical study

In-Depth Insight into Corrosion Inhibition Performance of Sweet Potato Leaf Extract as a Green and Efficient Inhibitor for 6N01 Al Alloy in the Seawater: Experimental and Theoretical Perspectives

Corrosion protection of metal has become an important and urgent topic, which requires the development of an inexpensive, environmentally friendly, and highly efficient corrosion inhibitor. Herein, a sweet potato leaf extract (SPL) was obtained by a simple water-based extraction method and then as a green corrosion inhibitor for 6N01 Al alloy in the seawater was well investigated by the weight loss method and various electrochemical tests. Fourier transform infrared (FT-IR) and ultraviolet-visible (UV-vis) spectroscopies were carried out to investigate the compositions of SPL. The findings from the potentiodynamic polarization (PDP) curves suggest that SPL functions as a typical mixed-type corrosion inhibitor. Notably, the maximum corrosion inhibition efficiency reaches 94.6% following a 36 h immersion period at 25 °C. The adsorption behavior of SPL on the Al alloy surface belongs to the Langmuir adsorption isotherm. The Gibbs free energy value illustrates that the adsorption of SPL contains both physisorption and chemisorption. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) indicate that SPL is firmly attached to the Al alloy surface by making a protective layer, which can effectively inhibit the corrosion of the Al alloy in the seawater. Furthermore, quantum chemical calculations were applied to validate the chemical adsorption and elucidate the relationship between the electronic structure of the active components in SPL and their effectiveness in corrosion inhibition.

Zwitterion modified chitosan as a high-performance corrosion inhibitor for mild steel in hydrochloric acid solution

Herein, a novel chitosan Schiff base (CS-FGA) as a sustainable corrosion inhibitor has been successfully synthesized via a simple amidation reaction by using an imidazolium zwitterion and chitosan (CS). The corrosion inhibition property of CS-FGA for mild steel (MS) in a 1.0 M HCl solution was studied by various electrochemical tests and physical characterization methods. The findings indicate that the maximum inhibition efficiency of CS-FGA as a mixed-type inhibitor for MS in 1.0 M HCl solution with 400 mg L-1 reaches 97.6 %, much much higher than the CS and the recently reported chitosan-based inhibitors. Scanning electron microscopy (SEM), atomic force microscopy (AFM), and water contact angle (WCA) results reveal that the CS-FGA molecules firmly adsorb on the MS surface to form a protective layer. The adsorption of CS-FGA on the MS surface belongs to the Langmuir adsorption isotherm containing both the physisorption and chemisorption. According to the X-ray photoelectron spectroscopy (XPS) and UV-vis spectrum, FeN bonds presented on the MS surface further prove the chemisorption between CS-FGA and Fe to generate the stable protective layer. Additionally, theoretical calculations from quantum chemical calculation (DFT) and molecular simulations (MD) were performed to reveal the inhibition mechanism of CS-FGA.

Experimental and computational studies on the corrosion inhibition potential of a novel synthesized thiophene and pyridine-based 1,3,4-oxadiazole hybrid against mild steel corrosion in 1 N HCl

A convenient synthesis of a novel 1,3,4-oxadiazole derivative, specifically known as, 2-(5-methylthiophen-2-yl)-5-(pyridin-3-yl)-1,3,4-oxadiazole (MTPO), is reported along with a comprehensive evaluation of its ability to inhibit the corrosion of mild steel (MS) in a 1 N HCl environment using weight loss, EIS, PDP, SEM, EDX, and UV-Vis spectroscopy. The investigated inhibitor expressed excellent inhibition efficiency (99.05% at 500 ppm, 298 K) with a mixed-type inhibitory mechanism as demonstrated by the PDP technique. Furthermore, MTPO followed Langmuir adsorption isotherm, which provides insights into the adsorption phenomena, demonstrating that it exhibits superior adsorption behavior on the MS surface compared. In silico investigations, using DFT computation and MD simulation complements the experimental outcomes revealing strong adsorbing attributes of the MTPO hybrid with the ω - and ω + values of 8.8882 eV and 4.4787 eV, respectively. In addition, the radial distribution function also addressed the chemisorption behavior of MTPO. This article also takes into consideration the various ways in which the inhibitor interacts with the mild steel, offering potential insights for developing strategies to mitigate metal dissolution in acidic environments.