WALL AND PARTICLE-SHAPE EFFECTS ON HEAT TRANSFER IN PACKED BEDS

Thermal Assessment of a Micro Fibrous Fischer Tropsch Fixed Bed Reactor Using Computational Fluid Dynamics

A two-dimensional (2D) Computational Fluid Dynamics (CFD) scale-up model of the Fischer Tropsch reactor was developed to thermally compare the Microfibrous-Entrapped-Cobalt-Catalyst (MFECC) and the conventional Packed Bed Reactor (PBR). The model implements an advanced predictive detailed kinetic model to study the effect of a thermal runaway on C5+ hydrocarbon product selectivity. Results demonstrate the superior capability of the MFECC bed in mitigating hotspot formation due to its ultra-high thermal conductivity. Furthermore, a process intensification study for radial scale-up of the reactor bed from 15 mm internal diameter (ID) to 102 mm ID demonstrated that large tube diameters in PBR lead to temperature runaway >200 K corresponding to >90% CO conversion at 100% methane selectivity, which is highly undesirable. While the MFECC bed hotspot temperature corresponded to <10 K at >30% CO conversion, attributing to significantly high thermal conductivity of the MFECC bed. Moreover, a noticeable improvement in C5+ hydrocarbon selectivity >70% was observed in the MFECC bed in contrast to a significantly low number for the PBR (<5%).

Recent Advances in the Critical Heat Flux Amelioration of Pool Boiling Surfaces Using Metal Oxide Nanoparticle Deposition

Pool boiling is an effective heat transfer process in a wide range of applications related to energy conversion, including power generation, solar collectors, cooling systems, refrigeration and air conditioning. By considering the broad range of applications, any improvement in higher heat-removal yield can ameliorate the ultimate heat usage and delay or even avoid the occurrence of system failures, thus leading to remarkable economic, environmental and energy efficiency outcomes. A century of research on ameliorating critical heat flux (CHF) has focused on altering the boiling surface characteristics, such as its nucleation site density, wettability, wickability and heat transfer area, by many innovative techniques. Due to the remarkable interest of using nanoparticle deposition on boiling surfaces, this review is targeted towards investigating whether or not metal oxide nanoparticles can modify surface characteristics to enhance the CHF. The influence of nanoparticle material, thermo-physical properties, concentration, shape, and size are categorized, and the inconsistency or contradictions of the existing research results are recognized. In the following, nanoparticle deposition methods are presented to provide a worthwhile alternative to deposition rather than nanofluid boiling. Furthermore, possible mechanisms and models are identified to explain the amelioration results. Finally, the present status of nanoparticle deposition for CHF amelioration, along with their future challenges, amelioration potentials, limitations, and their possible industrial implementation, is discussed.