Optically-heterodyne-detected optical Kerr effect (OHD-OKE): Applications in condensed phase dynamics

Low-Frequency Spectra of Hydrated Ionic Liquids with Kosmotropic and Chaotropic Anions

In this study, we investigated the water concentration dependence of the intermolecular vibrations of two hydrated ionic liquids (ILs), cholinium dihydrogen phosphate ([ch][dhp]) and cholinium bromide ([ch]Br), using femtosecond Raman-induced Kerr effect spectroscopy (fs-RIKES). The anions of the former and latter hydrated ILs are kosmotropic and chaotropic, respectively. We found that the spectral peak of ∼50 cm-1 shifted to the low-frequency side in hydrated [ch][dhp], indicating the weakening of its intermolecular interactions. In contrast, no change in the peak frequency of the low-frequency band at ∼50 cm-1 was observed with increasing water concentration in hydrated [ch]Br. The vibrational density of states (VDOS) spectra generated from molecular dynamics (MD) simulations were in qualitative agreement with the experimental results. Decomposition analysis of the VDOS spectra for each component revealed that the red shift of the low-frequency band in the hydrated [ch][dhp] upon water addition was essentially due to the contributions of anions and water rather than that of the cholinium cation. We also found from the low-frequency spectra of the two hydrated ILs that they differed in the concentration dependence of the 180 cm-1 band, which is assigned as a hindered translational motion of water molecules combined to form O···O stretching motions. From the relationship between the peak frequency of the low-frequency band and the bulk parameter, which is the square root of the surface tension divided by the density, we found that the peak frequency in the hydrated IL with kosmotropic [dhp]- depends on the bulk parameter, similar to the case for an aqueous solution of the typical deep eutectic solvent reline. However, the peak frequency of the hydrated IL with chaotropic Br- is constant with the bulk parameter.

Time-resolved vibrational dynamics: Novel opportunities for sensing and imaging

The evolution of time-resolved spectroscopies has resulted in significant advancements across numerous scientific disciplines, particularly those concerned with molecular electronic states. However, the intricacy of molecular vibrational spectroscopies, which provide comprehensive molecular-level information within complex structures, has presented considerable challenges due to the ultrashort dephasing time. Over recent decades, an increasing focus has been placed on exploring the temporal progression of bond vibrations, thereby facilitating an improved understanding of energy redistribution within and between molecules. This review article focuses on an array of time-resolved detection methodologies, each distinguished by unique technological attributes that offer exclusive capabilities for investigating the physical phenomena propelled by molecular vibrational dynamics. In summary, time-resolved vibrational spectroscopy emerges as a potent instrument for deciphering the dynamic behavior of molecules. Its potential for driving future progress across fields as diverse as biology and materials science is substantial, marking a promising future for this innovative tool.

Exploring the Microscopic Aspects of 1-Methyl-3-octylimidazolium Tetrafluoroborate Mixtures with Formamide, N-Methylformamide, and N,N-Dimethylformamide by Multiple Spectroscopic Techniques and Computations

The microscopic aspects of 1-methyl-3-octylimidazolium tetrafluoroborate ([MOIm][BF₄]) mixtures with formamide (FA), N-methylformamide (NMF), and N,N-dimethylformamide (DMF) were investigated using spectroscopic techniques of femtosecond Raman-induced Kerr effect spectroscopy (fs-RIKES), FT-IR, and NMR. Molecular dynamics simulations and quantum chemistry calculations were also performed. According to fs-RIKES, the first moment of the low-frequency spectrum bands mainly originating from the intermolecular vibrations in the [MOIm][BF₄]/FA and [MOIm][BF₄]/DMF systems changed gradually with the molecular liquid mole fraction X_ML but that in the [MOIm][BF₄]/NMF system was constant up to X_NMF = 0.7 and then gradually increased in the range of X_NMF ≥ 0.7. Excluding the contribution of the 2D hydrogen-bonding network due to the presence of FA in the low-frequency spectrum band, the X_ML dependence of the normalized first moment of the low-frequency band in the [MOIm][BF₄]/FA and [MOIm][BF₄]/NMF systems revealed that the normalized first moment did not remarkably change in the range of X_ML < 0.7 but drastically increased in X_ML ≥ 0.7. FT-IR results indicated that the amide C═O band shifted to the low-frequency side with increasing X_ML for the three mixtures due to the hydrogen bonds. The imidazolium ring C-H band also showed a similar tendency to the amide C═O band. ¹⁹F NMR probed the microenvironment of [BF₄]^- in the mixtures. The [MOIm][BF₄]/NMF and [MOIm][BF₄]/DMF systems showed an up-field shift of the F atoms of the anion with increasing X_ML, and the [MOIm][BF₄]/FA system exhibited a down-field shift. Steep changes in the chemical shifts were confirmed in the region of X_ML > 0.8. On the basis of the quantum chemistry calculations, the observed chemical shifts with increasing X_ML were mainly attributed to the many-body interactions of ions and amides for the [MOIm][BF₄]/FA and [MOIm][BF₄]/DMF systems. Meanwhile, the long distance between the cation and the anion was due to the high dielectric medium for the [MOIm][BF₄]/NMF system, which led to an up-field shift.

Physical Properties and Low-Frequency Polarizability Anisotropy and Dipole Responses of Phosphonium Bis(fluorosulfonyl)amide Ionic Liquids with Pentyl, Ethoxyethyl, or 2-(Ethylthio)ethyl Group

This study compared the physical properties, e.g., glass transition temperature, melting point, viscosity, density, surface tension, and electrical conductivity, and the low-frequency spectra under 200 cm^-1 of three synthesized ionic liquids (ILs), triethylpentylphosphonium bis(fluorosulfonyl)amide ([P₂₂₂₅][NF₂]), ethoxyethyltriethylphosphonium bis(fluorosulfonyl)amide ([P_222(2O2)][NF₂]), and triethyl[2-(ethylthio)ethyl]phosphonium bis(fluorosulfonyl)amide ([P_222(2S2)][NF₂]), at various temperatures using femtosecond Raman-induced Kerr effect spectroscopy (fs-RIKES) and terahertz time-domain spectroscopy (THz-TDS). The [P_222(2S2)][NF₂] had the highest viscosity and glass transition temperature, whereas the [P_222(2O2)][NF₂] had the lowest. Among the three ILs, the [P_222(2S2)][NF₂] had the highest density and surface tension, and the [P_222(2O2)][NF₂] had the highest electrical conductivity. The RIKES and THz-TDS spectral line shapes for the three ILs varied significantly. For the [P₂₂₂₅][NF₂], molecular dynamics simulations successfully reproduced the line shapes of the experimental spectra and indicated that the RIKES spectrum was mainly due to the cation and cross-term and their rotational motions, whereas the THz-TDS spectrum was mainly due to the anion and its translational motion. This shows that it is desirable to utilize both fs-RIKES and THz-TDS methods to reveal molecular motions at the low-frequency domain. The [P_222(2S2)][NF₂] had higher frequency peaks and broader bands in the low-frequency spectra via fs-RIKES and THz-TDS than those for the [P₂₂₂₅][NF₂] and [P_222(2O2)][NF₂].

Intermolecular Dynamics of Positively and Negatively Charged Aromatics and Their Isoelectronic Neutral Analogs in Aqueous Solutions

In this study, we investigated the temperature dependence of intermolecular vibrations and orientational dynamics in the aqueous solutions of imidazole hydrochloride, imidazole, sodium triazolide, and triazole using femtosecond Raman-induced Kerr effect spectroscopy (fs-RIKES) and steady-state Raman spectroscopy. The difference low-frequency Raman spectra under 250 cm-1 of the aqueous solutions relative to the neat water showed that the spectral shoulder in the high-frequency region at 60-100 cm-1, assigned to the libration of an aromatic ring, was higher in frequency for the imidazolium cation but lower for the triazolide anion than those of the respective neutral aromatics. The results of the ab initio quantum chemistry calculations of the clusters of the aromatics and water molecule(s) were consistent with the experimental spectra of the aqueous solutions. Further, the results of the temperature-dependent experiments showed that the signal intensity in the low-frequency region below 50 cm-1 increased for all solutions with an increase in temperature. In contrast, the spectral density in the high-frequency region above 80 cm-1 exhibited almost no shift for the 1.0 M solutions, while a significant red shift was observed for the 5.0 M solutions. In addition, the temperature-dependent densities, viscosities, and surface tensions were characterized for the aqueous aromatic solutions from 293 to 353 K.

Intermolecular Dynamics and Structure in Aqueous Lidocaine Hydrochloride Solutions

We investigated the intermolecular dynamics and static structure in the aqueous solutions of lidocaine hydrochloride (LDHCl) in the concentration range of [LDHCl] = 0-2.00 M using femtosecond Raman-induced Kerr effect spectroscopy (fs-RIKES), small- and wide-angle X-ray scattering (SWAXS), and dynamic light scattering (DLS). For the fs-RIKES experiments, the concentration dependence of the difference low-frequency spectra of the aqueous LDHCl solutions relative to the neat water, which was mainly due to the intermolecular vibrations, was characterized using an exponential function with a characteristic concentration of ∼1 M. For the SWAXS experiments, we observed a manifestation of an excess scattering component centered within a range of 8-10 nm^-1 in the aqueous LDHCl solutions. The results of Fourier inversion and further deconvolution analyses unambiguously demonstrated that lidocaines assemble into a nanometer-sized micelle-like structure with the innermost core (∼0.3 nm) and outer shell (∼0.5 nm), respectively. The DLS experiments also found nanometer-sized aggregates and further indicated evidence of the clusters of the aggregates. The results of viscosities, densities, and surface tensions of the solutions and the quantum chemistry calculations supported the unique features of the microscopic intermolecular interaction and the micelle-like aggregation.

Low-Frequency Spectra of 1-Methyl-3-octylimidazolium Tetrafluoroborate Mixtures with Poly(ethylene glycol) by Femtosecond Raman-Induced Kerr Effect Spectroscopy

This is the first report on low-frequency spectra of ionic liquid (IL)/polymer mixtures using femtosecond Raman-induced Kerr effect spectroscopy. We studied mixtures of 1-methyl-3-octylimidazolium tetrafluoroborate ([MOIm][BF₄]) and poly(ethylene glycol) (PEG) with M_n = 400 (PEG400) at various concentrations. To elucidate the unique features of the IL/polymer mixture system, mixtures of PEG400 with a molecular liquid, 1-octhylimidazole (OIm), which is a neutral analog of the cation, were also studied. In addition, mixtures of [MOIm][BF₄] with ethylene glycol (EG) and poly(ethylene glycol) with M_n = 4000 (PEG4000) were also investigated. The first moments of broad low-frequency spectra, mainly due to intermolecular vibrations for the [MOIm][BF₄]/PEG400 and OIm/PEG400, increased slightly with increasing concentration of PEG400, indicating that microscopic intermolecular interactions, in general, are slightly enhanced. We also compared the [MOIm][BF₄] mixtures with EG, PEG400, and PEG4000 at concentrations of 5 and 10 wt % PEG or EG. The low-frequency spectra of samples with the same concentrations were quite similar, but a comparison of the normalized spectra showed that the spectral intensity in the low-frequency region below ∼50 cm^-1 of the [MOIm][BF₄] mixtures with PEG400 and PEG4000 is somewhat lower than that of the [MOIm][BF₄] mixtures with EG. Although the effect of the polymer is small compared to other polymer solution systems, this feature is attributed to a suppression of translational motion in the mixtures of [MOIm][BF₄] with PEG compared to the mixtures of [MOIm][BF₄] with EG due to the greater mass of PEG than EG. Density, surface tension, viscosity, and electrical conductivity were also estimated. From Walden plots, it was found that the [MOIm][BF₄]/PEG4000 system showed more ideal electrical conductive behavior than the [MOIm][BF₄]/PEG400 and [MOIm][BF₄]/EG systems.

Protein-Ligand Binding Molecular Details Revealed by Terahertz Optical Kerr Spectroscopy: A Simulation Study

Picosecond fast motions and their involvement in the biochemical processes such as protein-ligand binding has engaged significant attention. Terahertz optical Kerr spectroscopy (OKE) has the superior potential to probe these fast motions directly. Application of OKE in protein-ligand binding study is, however, limited by the difficulty of quantitative atomistic interpretation, and the calculation of Kerr spectrum for entire solvated protein complex was considered not yet feasible, due to the lack of one consistent polarizable model for both configuration sampling and polarizability calculation. Here, we analyzed the biochemical relevance of OKE to the lysozyme-triacetylchitotriose binding based on the first OKE simulation using one consistent Drude polarizable model. An analytical multipole and induced dipole scheme was employed to calculate the off-diagonal Drude polarizability more efficiently and accurately. Further theoretical analysis revealed how the subtle twisting and stiffening of aromatic protein residues' spatial arrangement as well as the confinement of small water clusters between ligand and protein cavity due to the ligand binding can be examined using Kerr spectroscopy. Comparison between the signals of bound complex and that of uncorrelated protein/ligand demonstrated that binding action alone has reflection in the OKE spectrum. Our study indicated OKE as a powerful terahertz probe for protein-ligand binding chemistry and dynamics.

Altered relaxation dynamics of excited state reactions by confinement in reverse micelles probed by ultrafast fluorescence up-conversion

Chemical reactions in confined environments are important in areas as diverse as heterogenous catalysis, environmental chemistry and biochemistry, yet they are much less well understood than the equivalent reactions in either the gas phase or in free solution. The understanding of chemical reactions in solution was greatly enhanced by real time studies of model reactions, through ultrafast spectroscopy (especially when supported by molecular dynamics simulation). Here we review some of the efforts that have been made to adapt this approach to the investigation of reactions in confined media. Specifically, we review the application of ultrafast fluorescence spectroscopy to measure reaction dynamics in the nanoconfined water phase of reverse micelles, as a function of the droplet radius and the charge on the interface. Methods of measurement and modelling of the reactions are outlined. In all of the cases studied (which are focused on ultrafast intramolecular reactions) the effect of confinement was to suppress the reaction. Even in the largest micelles the result in the bulk aqueous phase was not usually recovered, suggesting an important role for specific interactions between reactant and environment, for example at the interface. There was no simple one-to-one correspondence with direct measures of the dynamics of the confined phase. Thus, understanding the effect of confinement on reaction rate appears to require not only knowledge of the dynamics of the reaction in solutions and the effect of confinement on the medium, but also of the interaction between reactant and confining medium.

Tracking Ultrafast Structural Dynamics by Time-Domain Raman Spectroscopy

In traditional Raman spectroscopy, narrow-band light is irradiated on a sample, and its inelastic scattering, i.e., Raman scattering, is detected. The energy difference between the Raman scattering and the incident light corresponds to the vibrational energy of the molecule, providing the Raman spectrum that contains rich information about the molecular-level properties of the materials. On the other hand, by using ultrashort optical pulses, it is possible to induce Raman-active coherent nuclear motion of the molecule and to observe the molecular vibration in real time. Moreover, this time-domain Raman measurement can be combined with femtosecond photoexcitation, triggering chemical changes, which enables tracking ultrafast structural dynamics in a form of “time-resolved” time-domain Raman spectroscopy, also known as time-resolved impulsive stimulated Raman spectroscopy. With the advent of stable, ultrashort laser pulse sources, time-resolved impulsive stimulated Raman spectroscopy now realizes high sensitivity and a wide detection frequency window from THz to 3000 cm^–1, and has seen success in unveiling the molecular mechanisms underlying the efficient functions of complex molecular systems. In this Perspective, we overview the present status of time-domain Raman spectroscopy, particularly focusing on its application to the study of femtosecond structural dynamics. We first explain the principle and a brief history of time-domain Raman spectroscopy and then describe the apparatus and recent applications to the femtosecond dynamics of complex molecular systems, including proteins, molecular assemblies, and functional materials. We also discuss future directions for time-domain Raman spectroscopy, which has reached a status allowing a wide range of applications.

Dynamics in the BMIM PF6/acetonitrile mixtures observed by femtosecond optical Kerr effect and molecular dynamics simulations

We have performed the measurements of the optical Kerr effect signal time evolution up to 4 ns for a mixture of 1-alkyl-3-methyl-imidazolium hexafluorophosphate (BMIM PF₆) ionic liquid and acetonitrile in the whole mole fractions range. The long delay line in our experimental setup allowed us to capture the complete reorientational dynamics of the ionic liquid. We have analysed the optical Kerr effect signal in the time and frequency domains with help of molecular dynamics simulations. In our approximation of the slow picosecond dynamics with a multi-exponential decay, we distinguish three relaxation times. The highest two are assigned to the reorientation of the cation and acetonitrile molecules that are in the vicinity of the imidazolium ring. The third one is recognized as originating from cation rotations and reorientation of acetonitrile molecules in the bulk or in the vicinity of the aliphatic chains of the cation. With help of the simulation we interpret the intermolecular band in the reduced spectral density, obtained from Kerr signal, as follows: its low-frequency side results from oscillations of one of the components in the cage formed by its neighbors, while the high-frequency side is attributed to the librations of the cation and acetonitrile molecule as well as the intermolecular oscillations of system components involved in specific interactions. We use this assignment and concentration dependence of the spectra obtained from velocity and angular velocity correlations to explain the mole fraction dependence of Kerr reduced spectral density.

Low-Frequency (Gigahertz to Terahertz) Depolarized Raman Scattering Off n-Alkanes, Cycloalkanes, and Six-Membered Rings: A Physical Interpretation

Molecular liquids have long been known to undergo various distinct intermolecular motions, from fast librations and cage-rattling oscillations to slow orientational and translational diffusion. However, their resultant gigahertz to terahertz spectra are far from simple, appearing as broad shapeless bands that span many orders of magnitude of frequency, making meaningful interpretation troublesome. Ad hoc spectral line shape fitting has become a notoriously fine art in the field; a unified approach to handling such spectra is long overdue. Here we apply ultrafast optical Kerr-effect (OKE) spectroscopy to study the intermolecular dynamics of room-temperature n-alkanes, cycloalkanes, and six-carbon rings, as well as liquid methane and propane. This work provides stress tests and converges upon an experimentally robust model across simple molecular series and range of temperatures, providing a blueprint for the interpretation of the dynamics of van der Waals liquids. This will enable the interpretation of low-frequency spectra of more complex liquids.

Time-resolved ultrafast transient polarization spectroscopy to investigate nonlinear processes and dynamics in electronically excited molecules on the femtosecond time scale

We report a novel experimental technique to investigate ultrafast dynamics in photoexcited molecules by probing the 3rd-order nonlinear optical susceptibility. A non-collinear 3-pulse scheme is developed to probe the ultrafast dynamics of excited electronic states using the optical Kerr effect. Optical homodyne and optical heterodyne detections are demonstrated to measure the 3rd-order nonlinear optical response for the S₁ excited state of liquid nitrobenzene, which is populated by 2-photon absorption of a 780 nm 40 fs excitation pulse.

Low-Frequency Vibrational Motions of Polystyrene in Carbon Tetrachloride: Comparison with Model Monomer and Dependence on Concentration and Molecular Weight

In this study, the low-frequency vibrational dynamics of polystyrene (PS) in CCl₄ was investigated by femtosecond Raman-induced Kerr effect spectroscopy. Ethylbenzene (EBz) was also investigated as a model monomer of the polymer to elucidate the unique dynamical features of PS in solution. The broadened low-frequency spectrum of the PS/CCl₄ in the frequency region below 150 cm^-1 is significantly different from that of the EBz/CCl₄. Difference spectra between the PS or EBz solutions and neat CCl₄, normalized to an internal vibrational mode of CCl₄, clearly show a much lower spectral intensity for the PS/CCl₄ than the EBz/CCl₄ in the low-frequency region below ca. 20 cm^-1. This indicates that translational motions are suppressed in the PS/CCl₄ compared to the EBz/CCl₄. Moreover, the high-frequency motion at ca. 70 cm^-1, mainly due to phenyl ring librations, occurs at higher frequency in PS (78 cm^-1) than EBz (65 cm^-1). In addition, the results of concentration-dependent experiments show that the first moment (M₁) of the low-frequency difference spectra of both PS/CCl₄ and EBz/CCl₄ is almost independent of the concentration. The molecular weight dependence of the low-frequency spectrum in the PS/CCl₄ shows that the M₁ value of the low-frequency spectral band of PS shifts to higher frequencies when the molecular weight of PS increases up to M_w = ∼1000, which corresponds approximately to the decamer, and then remains constant upon further increasing the molecular weight.

Optical Kerr effect spectroscopy of CS2 in monocationic and dicationic ionic liquids: insights into the intermolecular interactions in ionic liquids

A comparative study of the intermolecular dynamics of CS₂ in monocationic and dicationic ionic liquids (ILs) was performed using optical heterodyne-detected Raman-induced Kerr effect spectroscopy (OHD-RIKES). The reduced spectral densities (RSDs) of mixtures of CS₂ in 1-alkyl-3-methylimidazolium bis[(trifluoromethane)sulfonyl]amide ([C_nC₁im][NTf₂] for n = 3-5) and 1,2n-bis(3-methylimidazolium-1-yl) alkane bis[(trifluoromethane)sulfonyl]amide ([(C₁im)₂C_2n][NTf₂]₂ for n = 3-5) were investigated as a function of concentration at 295 K. An additivity model was used to obtain the CS₂ contribution to the RSD of a mixture in the 0-200 cm^-1 region. One of the aims of this study is to show how CS₂ can be used as a probe of intermolecular/interionic interactions in ILs. The concentrations were chosen such that the CS₂-to-imidazolium ring mole fraction of a mixture with [(C₁im)₂C_2n][NTf₂]₂ (DIL(2n)) is the same as that of a mixture with [C_nC₁im][NTf₂] (MIL(n)). As found previously for CS₂ in monocationic ILs, the intermolecular spectrum of CS₂ in dicationic ILs is lower in frequency and narrower than that of neat CS₂. The new result is that the intermolecular spectrum of CS₂ is higher in frequency in DIL(2n) than in the corresponding MIL(n), indicating that CS₂ molecules experience a stiffer potential in dicationic ILs than in monocationic ILs. The intermolecular dynamics of CS₂ being higher in frequency in DIL(2n) than in MIL(n) is consistent with recent molecular dynamics simulations (Lynden-Bell and Quitevis, J. Chem. Phys., 2018, 148, 193844) that show the stiffer potential is the result of greater confinement of CS₂ in DIL(2n) than in MIL(n). We also show in this study how effects due to dilution and the intermolecular potential seen by a solute molecule in solution are unraveled.

Impulsive Raman spectroscopy via precision measurement of frequency shift with low energy excitation

Stimulated Raman scattering (SRS) has recently become useful for chemically selective bioimaging. It is usually measured via modulation transfer from the pump beam to the Stokes beam. Impulsive stimulated Raman spectroscopy, on the other hand, relies on the spectral shift of ultrashort pulses as they propagate in a Raman active sample. This method was considered impractical with low energy pulses since the observed shifts are very small compared to the excitation pulse bandwidth, spanning many terahertz. Here we present a new apparatus, using tools borrowed from the field of precision measurement, for the detection of low-frequency Raman lines via stimulated-Raman-scattering-induced spectral shifts. This method does not require any spectral filtration and is therefore an excellent candidate to resolve low-lying Raman lines (<200  cm^-1), which are commonly masked by the strong Rayleigh scattering peak. Having the advantage of the high repetition rate of the ultrafast oscillator, we reduce the noise level by implementing a lock-in detection scheme with a wavelength shift sensitivity well below 100 fm. This is demonstrated by the measurement of low-frequency Raman lines of various liquid samples.

Rapid-scan Fourier-transform coherent anti-Stokes Raman scattering spectroscopy with heterodyne detection

High-speed Raman spectroscopy has become increasingly important for analyzing chemical dynamics in real time. To address the need, rapid-scan Fourier-transform coherent anti-Stokes Raman scattering (FT-CARS) spectroscopy has been developed to realize broadband CARS measurements at a scan rate of more than 20,000 scans/s. However, the detection sensitivity of FT-CARS spectroscopy is inherently low due to the limited number of photons detected during each scan. In this Letter, we show our experimental demonstration of enhanced sensitivity in rapid-scan FT-CARS spectroscopy by heterodyne detection. Specifically, we implemented heterodyne detection by superposing the CARS electric field with an external local oscillator (LO) for their interference. The CARS signal was amplified by simply increasing the power of the LO without the need for increasing the incident power onto the sample. Consequently, we achieved enhancement in signal intensity and the signal-to-noise ratio by factors of 39 and 5, respectively, compared to FT-CARS spectroscopy with homodyne detection. The sensitivity-improved rapid-scan FT-CARS spectroscopy is expected to enable the sensitive real-time observation of chemical dynamics in a broad range of settings, such as combustion engines and live biological cells.

Resolving and Controlling Photoinduced Ultrafast Solvation in the Solid State

Solid-state solvation (SSS) is a solid-state analogue of solvent-solute interactions in the liquid state. Although it could enable exceptionally fine control over the energetic properties of solid-state devices, its molecular mechanisms have remained largely unexplored. We use ultrafast transient absorption and optical Kerr effect spectroscopies to independently track and correlate both the excited-state dynamics of an organic emitter and the polarization anisotropy relaxation of a small polar dopant embedded in an amorphous polystyrene matrix. The results demonstrate that the dopants are able to rotationally reorient on ultrafast time scales following light-induced changes in the electronic configuration of the emitter, minimizing the system energy. The solid-state dopant-emitter dynamics are intrinsically analogous to liquid-state solvent-solute interactions. In addition, tuning the dopant/polymer pore ratio offers control over solvation dynamics by exploiting molecular-scale confinement of the dopants by the polymer matrix. Our findings will enable refined strategies for tuning optoelectronic material properties using SSS and offer new strategies to investigate mobility and disorder in heterogeneous solid and glassy materials.

Comparative study of the intermolecular dynamics of imidazolium-based ionic liquids with linear and branched alkyl chains: OHD-RIKES measurements

This article describes a comparative study of the low-frequency (0-450 cm^-1) Kerr spectra of the branched 1-(iso-alkyl)-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([(N - 2)mC_N-1C₁im][NTf₂] with N = 3-7) ionic liquids (ILs) and that of the linear 1-(n-alkyl)-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([C_NC₁im][NTf₂] with N = 2-7) ILs. The spectra were obtained by use of femtosecond optical heterodyne-detected Raman-induced Kerr effect spectroscopy (OHD-RIKES). The intermolecular spectrum of a branched IL is similar to that of a linear IL that is of the same alkyl chain length rather than of the same number of carbon atoms in the alkyl chain. This similarity and the lack of a correlation of the first spectral moments and widths of the intermolecular spectra with chain length is mainly attributed to the increase in the dispersion contribution to the total molar cohesive energy being compensated by stretching of the ionic network due to the increasing size of the nonpolar domains, which is dependent only on the length of the alkyl chain.

Measuring the nonlinear refractive index of graphene using the optical Kerr effect method

By means of the ultrafast optical Kerr effect method coupled to optical heterodyne detection (OHD-OKE), we characterize the third-order nonlinear response of graphene and compare it to experimental values obtained by the Z-scan method on the same samples. From these measurements, we estimate a negative nonlinear refractive index for monolayer graphene, n₂=-1.1×10^-13  m²/W. This is in contradiction to previously reported values, which leads us to compare our experimental measurements obtained by the OHD-OKE and the Z-scan method with theoretical and experimental values found in the literature and to discuss the discrepancies, taking into account parameters such as doping.

Ultrashort-laser-pulse-induced thermal lensing effect in pure H2O and a NaCl–H2O solution

Using the Z-scan technique with 82 MHz 18 femtosecond (fs) laser pulses at 820 nm, we explore the thermal lensing effect induced in pure H₂O and a NaCl–H₂O solution. We verify the contributions of thermal and mass diffusions in NaCl–H₂O.

Thermal lensing effect of CS2 studied with femtosecond laser pulses

By chopping 820 nm 18 femtosecond (fs)-laser pulses, continuously generated by a self-mode locked Ti:Al2O3 laser at 82 MHz, into trains with both train-width and train-to-train separation considerably longer than the thermal diffusivity time constant τth of CS2, we conducted Z-scan measurements on it at various times relative to the leading pulse of each train (T's). As a result, we observed negative nonlinear refraction strengthening with T within τth and gradually stabilizing with T exceeding τth. We quantitatively explain the experimental results in terms of the thermal lensing effect. In particular, we attribute the heat generation to non-radiative relaxation of libration excited by individual 18 fs-pulses via stimulated Raman scattering. In contrast to the commonly held view of multi-photon excitation, we propose and verify a new heat-generating mechanism for the thermal lensing effect in CS2.

Femtosecond optical Kerr effect setup with signal "live view" for measurements in the solid, liquid, and gas phases

We present the experimental setup constructed in our laboratory for measurement of the femtosecond optical Kerr effect. The setup allows measurements with high temporal resolution and acquisition speed. The high signal to noise ratio is obtained with use of a homemade balanced detector. Due to the high acquisition speed and good signal to noise ratio, it is possible to have a "live view" of the signal and to easily tune the sample position and orientation before the measurement. We show the example results obtained in the solid, liquid, and the gas phases and we use them in order to check on the precision of our setup. As the samples we have used a YAG crystal, liquid acetone, and atmospheric air. In the latter two cases, a good agreement with the literature data has been found. The measurements in the gas phase confirm that our setup, although utilizing low energy pulses from the sapphire oscillator, is able to acquire high quality rotational signal in a low density sample.

Beam deflection measurement of bound-electronic and rotational nonlinear refraction in molecular gases

A polarization-resolved beam deflection technique is used to separate the bound-electronic and molecular rotational components of nonlinear refractive transients of molecular gases. Coherent rotational revivals from N(2), O(2), and two isotopologues of carbon disulfide (CS(2)), are identified in gaseous mixtures. Dephasing rates, rotational and centrifugal distortion constants of each species are measured. Polarization at the magic angle allows unambiguous measurement of the bound-electronic nonlinear refractive index of air and second hyperpolarizability of CS(2). Agreement between gas and liquid phase second hyperpolarizability measurements is found using the Lorentz-Lorenz local field correction.

An OHD-RIKES and simulation study comparing a benzylmethylimidazolium ionic liquid with an equimolar mixture of dimethylimidazolium and benzene

The Kerr spectra of a mixture of benzene and an ionic liquid are compared to the corresponding benzylated ionic liquid and found to be surprisingly similar.