Tubular Membrane Filtration with A Side Stream and its Intermittent Backwash Operation

Optimization of In Situ Backwashing Frequency for Stable Operation of Anaerobic Ceramic Membrane Bioreactor

The cost-effective and stable operation of an anaerobic ceramic membrane bioreactor (AnCMBR) depends on operational strategies to minimize membrane fouling. A novel strategy for backwashing, filtration and relaxation was optimized for stable operation of a side stream tubular AnCMBR treating domestic wastewater at the ambient temperature. Two in situ backwashing schemes (once a day at 60 s/day, and twice a day at 60 s × 2/day) maintaining 55 min filtration and 5 min relaxation as a constant were compared. A flux level over 70% of the initial membrane flux was stabilized by in situ permeate backwashing irrespective of its frequency. The in situ backwashing by permeate once a day was better for energy saving, stable membrane filtration and less permeate consumption. Ex situ chemical cleaning after 60 days’ operation was carried out using pure water, sodium hypochlorite (NaOCl), and citric acid as the order. The dominant cake layer was effectively reduced by in situ backwashing, and the major organic foulants were fulvic acid-like substances and humic acid-like substances. Proteobacteria, Firmucutes, Epsilonbacteria and Bacteroides were the major microbes attached to the ceramic membrane fouling layer which were effectively removed by NaOCl.

Numerical and experimental investigation for cleaning process of submerged outside-in hollow fiber membrane

Membrane fouling has limited extensive applications for hollow fiber membranes in water treatment. Backwashing and air scouring can effectively solve this problem in the submerged outside-in hollow fiber membrane system. In this study, variation of the fouling layer on the membrane surface during backwashing and the impact of shear stress caused by air scouring on fouling removal were investigated through computational fluid dynamics (CFD) simulation. The backwashing and air scouring process were simulated using CFD and the results were verified by experimental studies. The results of experimental studies are in accordance with the simulation results. During the backwashing process, the velocity profile inside the reactor was presented, and visualization of the particle movement to illustrate the dynamic peeling process of the fouling layer on the membrane surface was also shown. The formation of uneven cleaning reveals that the upper region of the fibers has an excellent cleaning effect during backwashing. After that, the supporting role of air scouring was investigated in the study. It is concluded that the lower part and the middle region of the fibers suffer greater shear stress by analyzing the velocity contours and vectors, and the analysis results indicated that air scouring can further remove membrane fouling.