Cloud Point Extraction (CPE) of Parabens using Nonionic Surfactant Phase Separation

Evaluation of green silicone surfactant-based vortex assisted dispersive liquid-liquid microextraction for sample preparation of organophosphorus pesticide residues in honey and fruit sample

A vortex assisted surfactant enhanced emulsification liquid-liquid microextraction based on non-ionic silicone surfactant was successfully developed for the determination of organophosphorus pesticides in food samples coupled to gas chromatography-mass spectrometry. A new type of non-ionic silicone surfactant composed of polysiloxane chains was employed as a green emulsifier to facilitate the emulsification of extraction solvent into the sample matrix, thereby intensifying the mass transfer of target analytes into the organic phase. The variables that affect the extraction were systematically optimized: 80 μL of hexane and 0.5% (v/v) of silicone surfactant were used as extraction solvent and surfactant respectively, the solution was mixed well under vortex agitation for 1 min with the addition of 4% (w/v) sodium sulfate. Under optimum conditions, the linearity of the method was obtained in the range of 0.1 - 200 μg/kg with good coefficient of determination varying from 0.9986 to 0.9996. The LOD and LOQ were in between 0.008 - 0.1 μg/kg and 0.02 - 0.3 μg/kg, respectively. Application of the proposed method to real samples gave satisfactory recovery values (80 - 118%) for the target analytes. The suggested approach has also proven to be convenient, expeditious and environmentally benign. This article is protected by copyright. All rights reserved.

Performance evaluation of non-ionic silicone surfactants OFX 0309 and DC 193C as a new approach in cloud point extraction – spectrophotometry for determination of atrazine in water samples

Cloud point extraction (CPE) – spectrophotometric method had been adopted for the separation of atrazine using the non-ionic silicone surfactant, polysiloxane polyether, as a new approach of atrazine extractor in CPE. There were two types of polysiloxane polyether (DC 193C and OFX 0309) studied to investigate the effectiveness of these surfactants toward atrazine in CPE method. Various effects of operating parameters such as the concentration of surfactant and atrazine, addition of salt and change of temperature and pH on the extraction of atrazine have been studied in detail to find the optimum conditions. The limit of detections (LODs) and quantifications (LOQs) were in the range of 0.09–0.59 μg L⁻¹ and 0.31–1.95 μg L⁻¹ in water samples, respectively. The method recoveries at two spiked levels were 84–105% (CPE-OFX 0309) and 59–69% (CPE-DC 193C) with good correlation of determination (R²) ranging from 0.9927–0.9993 for both methods. The Langmuir isotherm has been used for solubilisation study of surfactant and atrazine. The thermodynamic parameters have been determined such as Gibbs free energy (ΔG°) which increases with temperature, value of enthalpy (ΔH°) and value of entropy (ΔS°) which increase with the surfactant hydrophobicity.

The principle of cloud point extraction (CPE) adopted for the separation of atrazine.