Adsorption Characteristics of Bisphenol A from Aqueous Solution onto HDTMAB-Modified Palygorskite

Advancements in Clay Materials for Trace Level Determination and Remediation of Phenols from Wastewater: A Review

The wide spread of phenols and their toxicity in the environment pose a severe threat to the existence and sustainability of living organisms. Rapid detection of these pollutants in wastewaters has attracted the attention of researchers from various fields of environmental science and engineering. Discoveries regarding materials and method developments are deemed necessary for the effective detection and remediation of wastewater. Although various advanced materials such as organic and inorganic materials have been developed, secondary pollution due to material leaching has become a major concern. Therefore, a natural-based material is preferable. Clay is one of the potential natural-based sorbents for the detection and remediation of phenols. It has a high porosity and polarity, good mechanical strength, moisture resistance, chemical and thermal stability, and cation exchange capacity, which will benefit the detection and adsorptive removal of phenols. Several attempts have been made to improve the capabilities of natural clay as sorbent. This manuscript will discuss the potential of clays as sorbents for the remediation of phenols. The activation, modification, and application of clays have been discussed. The achievements, challenges, and concluding remarks were provided.

Low-Cost Synthesis of Alumina Nanoparticles and Their Usage for Bisphenol-A Removal from Aqueous Solutions

Gamma-alumina nanoparticles (γANPs) were obtained from a low-cost process by using natural bauxites. The γANPs materials were characterized by X-ray powder diffraction (XRPD), Fourier-transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET) theory, scanning electron microscopy (SEM), atomic force microscopy (AFM), and were functionalized with N-cetyl-N, N, N, trimethylammonium bromide (CTAB), leading to CTAB modified γ-alumina nanoparticles (γANPs-CTAB). These novel functionalized γANPs-CTAB were characterized by XRPD, FTIR, and were used as an adsorbent for bisphenol-A (BPA) removal from water. Batch investigations were conducted under different experimental conditions (e.g., adsorbent dose, agitation time, initial concentration, and pH and surfactant loading) in order to optimize BPA adsorption and to identify the adsorption mechanisms in the system γANPs-CTAB-BPA. The effect of pH on the adsorption showed that the quantity of BPA removed increased remarkably until the pH value was 4, then remained almost constant until the pH value was up to 10, and then decreased for pH values greater than 10. For an initial BPA concentration of 20 mg/L and an adsorbent dose of 12.5 g/L at a pH value of 10, the removal efficiency achieved was 91.80 ± 0.21%. The adsorption mechanism was perfectly described by pseudo-second-order kinetics and the Langmuir isotherm. γANPs-CTAB materials were found to be effective adsorbents for BPA removal from water.

Lignocellulose@ Activated Clay Nanocomposite with Hierarchical Nanostructure Enhancing the Removal of Aqueous Zn(II)

A lignocellulose@ activated clay (Ln@AC) nanocomposite with a hierarchical nanostructure was successfully synthesized by the chemical intercalation reaction and applied in the removal of Zn(II) from an aqueous solution. Ln@AC was characterized by N2 adsorption/desorption isotherms and X-Ray Diffraction (XRD), scanning Electron Microscope (SEM), transmission Electron Microscopy (TEM) and Fourier Transform Infrared Spectroscopy (FTIR) analysis, and the results indicate that an intercalated-exfoliated hierarchical nanostructure was formed. The effects of different adsorption parameters on the Zn(II) removal rate (weight ratio of Ln to AC, Ln@AC dosage, initial Zn(II) concentration, pH value, adsorption temperature, and time) were investigated in detail. The equilibrium adsorption capacity reached 315.9 mg/g under optimal conditions (i.e., the weight ratio of Ln to AC of 3:1, Ln@AC dosage of 1 g/L, initial Zn(II) concentration of 600 mg/L, pH value of 6.8, adsorption temperature of 65 °C, and adsorption time of 50 min). The adsorption process was described by the pseudo-second-order kinetic model, Langmuir isotherm model, and the Elovich model. Moreover, Zn(II) could be easily eluted by HCl, and the effects of HCl concentration, desorption temperature, and ultrasonic desorption time on desorbed amount were tested. Desorption studies revealed that with an HCl concentration of 0.25 mol/L, desorption temperature of 70 °C, and ultrasonic desorption time of 20 min, the maximum desorption capacity and efficiency were achieved at 202.5 mg/g and 64.10%, respectively. Regeneration experimental results indicated that the Ln@AC exhibited a certain recyclable regeneration performance. Due to such outstanding features, the novel Ln@AC nanocomposite proved to have great adsorption potential for Zn(II) removal from wastewater, and exhibited an extremely significant amount of adsorbed Zn(II) when compared to conventional adsorbents.

Adsorptive removal of bisphenol A (BPA) from aqueous solution: A review

Endocrine-disrupting compounds (EDCs) are an important class of emerging contaminants that have been detected (and are still being detected) in aquatic environments such as surface waters, groundwater, wastewater, runoff, and landfill leachates. Bisphenol A (BPA) is a known endocrine disruptor that is acutely toxic to the living organisms. BPA has been widely used in the manufacture of sunscreen lotions, nail polish, body wash/lotions, bar soaps, shampoo, conditioners, shaving creams, and face lotions/cleanser, besides its other industrial applications. In the present review, an overview of the recent research studies dealing with the BPA removal from water by adsorption method is presented. We have reviewed various conventional and non-conventional adsorbents which have been used for BPA removal from water. It is evident from the literature reviewed that modified adsorbents and composite materials have shown promising results for BPA removal from water. Literature has been extensively discussed in terms of adsorption capacities, fitted isotherm and kinetic models and thermodynamic aspects.

Removal of Bisphenol A aqueous solution using surfactant-modified natural zeolite: Taguchi's experimental design, adsorption kinetic, equilibrium and thermodynamic study

In this study, surfactant-modified natural zeolite was used to remove Bisphenol A (BPA) from aqueous solutions. Kinetics, equilibrium and thermodynamics of BPA adsorption on the adsorbent surfaces were investigated. The experimental data were described with the Temkin isotherm and the pseudo-second- order kinetic model. Taguchi's robust design approach was used to optimize adsorption of BPA. Experimentation was planned as per Taguchi's L27 orthogonal array. Tests were conducted with different adsorbate amount, pH, time, initial concentration of BPA, temperature and agitation speed. The optimum levels of control factors for maximum total organic carbon removal were defined (adsorbate amount at 0.25 g, pH at 7, time at 30 min, initial concentration of BPA at 50 mg/L, temperature at 30°C and agitation speed at 200 rpm). The ANOVA analysis shown that the most effective control factor is adsorbent dosage; its contribution is 56.4%. Contribution of pH and mixing rate are 7.5% and 7.6%, respectively. A confirmation experiment was conducted to verify the feasibility and effectiveness of the optimal combination. The observed value of S/N (η_obs = 39) ratio is compared with that of the predicted value (η_opt = 48). The prediction error, that is, η_opt- η_obs = 9, is within CI value.

Removal of bisphenol A and its derivatives from aqueous medium through laccase-catalyzed treatment enhanced by addition of polyethylene glycol

In this study, enzymatic removal of bisphenol A (BPA) from the aqueous medium was investigated through the generation of water-insoluble oligomers, and this procedure was applied to removal of bisphenol derivatives. The experimental parameters, such as the temperature, pH value, enzyme concentration, and concentration and molecular weight of polyethylene glycol (PEG), were determined for the laccase-catalyzed treatment of BPA. The optimum conditions were determined to be pH 7.0 and 40°C in the absence of PEG. Water-insoluble oligomers generated under these conditions were readily removed by filtration or centrifugation. The optimum pH value was decreased to 5.0 in the presence of PEG and the laccase dose was reduced to one-fiftieth of that in the absence of PEG. This indicates that the addition of PEG protects the enzymatic activity and prevents capture of laccase molecules in the oligomers. The oligomers generated in the presence of PEG were removed from the aqueous medium by filtration with a membrane filter or by centrifugation. The oligomers were completely filtrated out with a filter paper by decreasing the pH value to 3.0. In addition, several bisphenol derivatives were also treated and subsequently removed by adjusting the laccase dose in the presence of PEG using the above procedure.