Advanced treatment of textile dyeing wastewater through the combination of moving bed biofilm reactors and ozonation

Biodegradation of acid red 3BN dye in sequential batch reactor: parameters and kinetics studies

Textile and dye industries generate wastewater which is considered as highly polluted and carcinogenic. Due to this, treatment of wastewater is required earlier to discharge or recycle. In the present studies, treatment of dye bearing water (DBW) has been explored. The treatment was performed using activated sludge (mixed culture) for aerobic process in sequential batch reactor (SBR). The fill volume (V F) and fill time (t F) variation in the treatment of DBW was taken place. The initial value of dye concentration, chemical oxygen demand (COD), sludge, and hydraulic retention time (HRT) were found to play important role in the treatment. At optimum condition (HRT = 2.5 d), the 86.84% COD reduction of 190 mg/L COD, and 92.33% dye reduction of 339 mg/L dye were achieved. These values are equal to overall 94.85% dye reduction of 500 mg/L, and 93.15% COD reduction of 380 mg/L. As a result, 500 mg/L dye was reduced to 26 mg/L, and 380 mg/L COD was reduced to 25 mg/L. The biodegradation fitted to Monod kinetics, for which kinetics parameter values of specific growth rate constant of biomass µ = 0.0047 h−1, yield coefficient (Y) = 1.059, and substrate utilization rate (q) = 0.0044 h−1 were evaluated at HRT = 2.5 d. The results show, this process can be applied to treat Acid Red 3BN Dye Water (AR3BNDW).

A comprehensive review on the integration of advanced oxidation processes with biodegradation for the treatment of textile wastewater containing azo dyes

The threat of dye contamination has achieved an unsurpassed abnormal state lately due to their massive consumption in several enterprises including textile, leather, cosmetic, plastic, and paper industries. This review focuses on the integrations of various advanced oxidation processes (AOPs), such as Fenton, photocatalysis, and ozonation, with biodegradation for the treatment of textile azo dyes. Such integrations have been explored lately by researchers to bring down the processing cost and improve the degree of mineralization of the treated dyeing wastewater. The review refers to the basic mechanisms, the influence of various process parameters, outcomes of recent works, and future research directions. All the three AOPs, independently, demonstrated substantial color reduction of 54–100%. The ozonation process, stand-alone, showed the most efficient decolorization (of 88–100%) consistently in all reviewed research works. In contrast, all three AOPs independently offered varied and inadequate COD reduction in the range of 16–80%. The AOPs, after getting integrated with biodegradation, yielded an additional reduction (of 11–70%) in the COD-levels and (of 16–80%) in the TOC-levels. Further, the integration of AOPs with biodegradation has potential to significantly reduce the treatment costs. The review suggests further research efforts in the direction of sequencing chemical and biological routes such that their synergistic utilization yield complete detoxification of the textile azo dyes economically at large-scale.

The plasticity of indigenous microbial community in a full-scale heavy oil-produced water treatment plant

Indigenous microbial communities are main and promising performers for bioremediation due to their excellent adaptability, degradation capability, and inherent plasticity. Treating heavy oil-produced water (HOPW) is a challenge owing to the high recalcitrance and heterogeneity of chemicals it contains. A full-scale HOPW treatment plant was built at a capacity of 10,000 m³/d with the indigenous microbial community. After the treatment, the outlet water reached the design standard. The microbial community structures in all treatment stages were analyzed by using Illumina MiSeq 16S rRNA gene sequencing. The composition of microbial community changed greatly with the changes in environmental conditions, especially with the only artificially regulated parameter of dissolved oxygen. In the anaerobic stage, the community converted the recalcitrant chemical oxygen demand to biological oxygen demand (BOD), and played a major role in enhancing the biodegradability of HOPW. During the aerobic stage, the community mainly mineralized BOD. These results suggest that the structures of indigenous microbial community differed in different treatment stages to accomplish the corresponding functions. Based on these findings, it is proposed that exploiting the plasticity of microbial communities for bioremediation is feasible, especially treating wastewater with varied components.