From 3 fingers to 5 fingers dexterous hands

Highly Anthropomorphic Finger Design With a Novel Friction Clutch for Achieving Human-Like Reach-and-Grasp Movements

In the design of prosthetic hand fingers, achieving human-like movement while meeting anthropomorphic demands such as appearance, size, and lightweight is quite challenging. Human finger movement involves two distinct motion characters during natural reach-and-grasp tasks: consistency in the reaching stage and adaptability in the grasping stage. The former one enhances grasp stability and reduces control complexity; the latter one promotes the adaptability of finger to various objects. However, conventional tendon-driven prosthetic finger designs typically incorporate bulky actuation modules or complex tendon routes to reconcile the consistency and adaptability. In contrast, we propose a novel friction clutch consisting of a single tendon and slider, which is simple and compact enough to be configurated within the metacarpal bone. Through tactfully exploiting the friction force to balance the gravity effect on each phalanx during finger motion, this design effectively combines both consistency and adaptability. As a result, the prosthetic finger can maintain consistent motion unaffected by any spatial posture during reaching, execute adaptive motion during grasping, and automatically switch between them, resulting in human-like reach-and-grasp movements. Additionally, the proposed finger achieves a highly anthropomorphic design, weighing only 18.9 g and possessing the same size as an adult's middle finger. Finally, a series of experiments validate the theoretical effectiveness and motion performance of the proposed design. Remarkably, the mechanical principle of the proposed friction clutch is beneficial to achieve highly anthropomorphic design, providing not only a new strategy to prosthetic hand design but also great potential in hand rehabilitation.

Multi-Layered Carbon-Black/Elastomer-Composite-Based Shielded Stretchable Capacitive Sensors for the Underactuated Robotic Hand

Soft and flexible strain sensors are becoming popular for many robotic applications. This article presents a stretchable capacitive sensor by combining a conductive filler of carbon black with elastomers and implementing shielding to reduce parasitic interference, applied to an underactuated robotic hand. Sensors with different configurations were explored. The results show that a shield introduced to the sensor does have some mitigation effect on external interference. Two sensor configurations were explored: longitudinal interdigitated capacitive (LIDC) sensor, where the interdigitated fingers lie along the same axis as the strain, and transverse interdigitated capacitive (TIDC) sensor, where the interdigitated fingers are orthogonal to the strain direction. The LIDC configuration had better performance than TIDC. The fabricated two-layered LIDC sensor had a gage factor of 0.15 pF/mm and the rates of capacitive creep of 0.000667 pF/s and 0.001 pF/s at loads of 120 g and 180 g, respectively. The LIDC sensors attached to an underactuated robotic hand demonstrate the sensors’ ability to determine the bending angles of the proximal interphalangeal (PIP) and metacarpophalangeal (MCP) joints.

Anthropomorphic Prosthetic Hand with Combination of Light Weight and Diversiform Motions

Most prosthetic hands adopt an under-actuated mechanism to achieve dexterous motion performance with a lightweight and anthropomorphic design. Many have been verified in laboratories, and some have already been commercialized. However, a trade-off exists between the dexterity and the light weight of such prosthetic hands. In general, current commercially available prosthetic hands usually consider one aspect at the expense of the other, such as obtaining diversiform hand motions but an increased weight, or achieving lightweight design but with limited motion functions. This study attempts to attain a balance between the two factors, by realizing diversiform hand motions while reducing the weight as far as possible. An anthropomorphic prosthetic hand is proposed with only three servomotors embedded in a human-sized palm, with multiple functions, such as a stable/adaptive grasp and passive hyperextension. The proposed hand can achieve 13 grasp types with over 80% of the grasp motions under the Cutkosky taxonomy, while it weighs only 132.5 g, at less than 36% of the prosthesis weight limitation based on the study of Kay et al.