Effect of Interfacially Active Fractions of Some Egyptian Crude Oils on Their Emulsion Stability

Investigation of ionic liquid adsorption and interfacial tension reduction using different crude oils; effects of salts, ionic liquid, and pH

The results revealed the significant effect of NaCl, KCl, CaCl2, MgCl2, CaSO4, MgSO4, and Na2SO4 and pH values of 3.5-11 on the interfacial tension (IFT) reduction using three types of neutral, acidic, and basic crude oils, especially for acidic crude oil (crude oil II) as the pH was changed from 3.5 to 11 (due to saponification process). The findings showed the highest impact of pH on the IFT of crude oil II with a reducing trend, especially for the pH 11 when no salts exist. The results revealed that the salts except MgCl2 and CaCl2 led to a similar IFT variation trend for the case of distilled water/crude oil II. For the MgCl2 and CaCl2 solutions, a shifting point for IFT values was inevitable. Besides, the dissolution of 1-dodecyl-3-methyl imidazolium chloride ([C12mim][Cl]) with a concentration of 100-1000 ppm eliminates the effect of pH on IFT which leads to a reducing trend for all the examined crude oils with minimum IFT of 0.08 mN/m. Finally, the [C12mim][Cl] adsorption (under pH values) for crude oils using only Na2SO4 was measured and the minimum adsorption of 0.41 mg surfactant/g Rock under the light of saponification process was obtained.

Effects of conventional and ionic liquid-based surfactants and sodium tetraborate on interfacial tension of acidic crude oil

The application of a new class of surfactants such as ionic liquids (ILs) compared with the conventional surfactants and their interactions with each other concomitant and alkaline under salinities is not well examined based on the best knowledge of the authors. So, the current work focused on the impact of sodium lauryl sulfate (SDS), sodium dodecyl benzene sulfonate (SDBS), 1-dodecyl 3-methyl imidazolium chloride (C12mim][Cl]), 1-octadecyl 3-methyl imidazolium chloride ([C18mim][Cl]) in the presence and absence of alkali namely sodium tetraborate known as borax (Na2B4O7) on the IFT variation while the salinity was changed 0-82,000 ppm (ionic strength of 0-1.4 M). The results showed the positive impact of salinity on the pH reduction and reduced the alkaline effect for pH reduction. Also, the measurements showed that the presence of surfactant reduces the role of alkaline for pH variation as it moved from 9.2 to 6.63 for the solution prepared using SLS and SDBS. The measured IFT values showed that not only alkali has a significant impact as it combined with SLS and SDBS due to a desired synergy between these chemicals, it can reduce the critical micelle concentration (CMC) for the SDBS from 1105 to 852 ppm and much higher for [C12mim][Cl].