Kinetic Study of Sorption of 2,4‐D and Atrazine on Rubber Granules

Adsorption of Phenoxyacetic Herbicides from Water on Carbonaceous and Non-Carbonaceous Adsorbents

The increasing consumption of phenoxyacetic acid-derived herbicides is becoming a major public health and environmental concern, posing a serious challenge to existing conventional water treatment systems. Among the various physicochemical and biological purification processes, adsorption is considered one of the most efficient and popular techniques due to its high removal efficiency, ease of operation, and cost effectiveness. This review article provides extensive literature information on the adsorption of phenoxyacetic herbicides by various adsorbents. The purpose of this article is to organize the scattered information on the currently used adsorbents for herbicide removal from the water, such as activated carbons, carbon and silica adsorbents, metal oxides, and numerous natural and industrial waste materials known as low-cost adsorbents. The adsorption capacity of these adsorbents was compared for the two most popular phenoxyacetic herbicides, 2,4-dichlorophenoxyacetic acid (2,4-D) and 2-methyl-4-chlorophenoxyacetic acid (MCPA). The application of various kinetic models and adsorption isotherms in describing the removal of these herbicides by the adsorbents was also presented and discussed. At the beginning of this review paper, the most important information on phenoxyacetic herbicides has been collected, including their classification, physicochemical properties, and occurrence in the environment.

Cleaner Approach for Atrazine Removal Using Recycling Biowaste/Waste in Permeable Barriers

This work addresses the rehabilitation of water contaminated with atrazine, entrapping it in a permeable and sustainable barrier designed with waste materials (sepiolite) and with biomaterials (cork and pine bark). Atrazine adsorption was assessed by kinetics and equilibrium assays and desorption was tested with different extraction solvents. Adsorbed atrazine was 100% recovered from sepiolite using 20% acetonitrile solution, while 40% acetonitrile was needed to leach it from cork (98%) and pine bark (94%). Continuous fixed-bed experiments using those sorbents as PRB were performed to evaluate atrazine removal for up-scale applications. The modified dose-response model properly described the breakthrough data. The highest adsorption capacity was achieved by sepiolite (23.3 (±0.8) mg/g), followed by pine bark (14.8 (±0.6) mg/g) and cork (13.0 (±0.9) mg/g). Recyclability of sorbents was evaluated by adsorption-desorption cycles. After two regenerations, sepiolite achieved 81% of atrazine removal, followed by pine with 78% and cork with 54%. Sepiolite had the best performance in terms of adsorption capacity/stability. SEM and FTIR analyses confirmed no significant differences in material morphology and structure. This study demonstrates that recycling waste/biowaste is a sustainable option for wastewater treatment, with waste valorization and environmental protection.