Interfacial and Emulsion Stabilizing Properties of Indigenous Acidic and Esterified Asphaltenes

Demulsification of Heavy Oil-in-Water Emulsion by a Novel Janus Graphene Oxide Nanosheet: Experiments and Molecular Dynamic Simulations

Various nanoparticles have been applied as chemical demulsifiers to separate the crude-oil-in-water emulsion in the petroleum industry, including graphene oxide (GO). In this study, the Janus amphiphilic graphene oxide (JGO) was prepared by asymmetrical chemical modification on one side of the GO surface with n-octylamine. The JGO structure was verified by Fourier-transform infrared spectra (FTIR), transmission electron microscopy (TEM), and contact angle measurements. Compared with GO, JGO showed a superior ability to break the heavy oil-in-water emulsion with a demulsification efficiency reaching up to 98.25% at the optimal concentration (40 mg/L). The effects of pH and temperature on the JGO’s demulsification efficiency were also investigated. Based on the results of interfacial dilatational rheology measurement and molecular dynamic simulation, it was speculated that the intensive interaction between JGO and asphaltenes should be responsible for the excellent demulsification performance of JGO. This work not only provided a potential high-performance demulsifier for the separation of crude-oil-in-water emulsion, but also proposed novel insights to the mechanism of GO-based demulsifiers.

Microcalorimetry Study of the Adsorption of Asphaltenes and Asphaltene Model Compounds at the Liquid-Solid Surface

The adsorption of an acidic polyaromatic asphaltene model compound (C5PeC11) and indigenous C6-asphaltenes onto the liquid-solid surface is studied. Model compound C5PeC11 exhibits a similar type of adsorption with a plateau adsorbed amount as C6-asphaltenes onto three surfaces (silica, calcite, and stainless steel). Model compound BisAC11, with aliphatic end groups and no acidic functionality, does not adsorb at the liquid-silica surface, indicating the importance of polar interactions on adsorption. The values of the adsorption enthalpy characterized by the ΔHz parameter (the enthalpy at zero coverage) indicate that the type of adsorption and the driving force depend on the surface, a key feature when discussing asphaltene deposition. The adsorption of C5PeC11 onto silica is shown to be driven primarily by H bonding (ΔHz = -34.9 kJ/mol), unlike adsorption onto calcite where polar van der Waals and acidic/basic interactions are thought to be predominant (ΔHz = -23.5 kJ/mol). Interactions between C5PeC11 and stainless steel are found to be weak (ΔHz = -7.7 kJ/mol). Comparing C6-asphaltenes and their esterified counterpart shows that adsorption at the liquid-solid surface is not influenced by the formation of H bonds. This was evidenced by the similar adsorbed amounts obtained. Finally, C5PeC11 captures, to a certain extent, the adsorption interactions of asphaltenes present at the calcite-oil and stainless steel-oil surfaces.