Investigation of removal of Ag(I) from aqueous solution by a novel chelating resin containing acyl and thiourea groups

Highly Efficient Recovery of Au(I) from Gold Leaching Solution Using Sodium Dimethyldithiocarbamate

As a sustainable, nontoxic and environmentally friendly cyanide-free gold leaching agent, thiosulfate has been applied to some extent in the field of hydrometallurgy. However, the difficult recovery of gold ions in gold leaching solutions limits further application of thiosulfate gold leaching technology. This study demonstrated the feasibility of gold recovery by sodium dimethyldithiocarbamate (SDD) precipitation and recycling of ammonia and a lixiviant in solution. SDD achieved the purpose of recovering gold by forming granular precipitates with gold ions in solution. It can almost completely recover gold ions in 2.5-17.34 mg/L of gold leaching solution within 1 min at 25 °C, in which a gold recovery capacity of 7.99 kg/t is achieved. The leaching rate of gold ore did not change significantly after recycling the residual ammonia and thiosulfate in the leaching solution after gold recovery by SDD, and its leaching rate basically remained at 81%. The mechanism of SDD recovering Au was determined to involve the ligand exchange of SDD- and Au[(S2O3)2]3-. Moreover, the interaction mechanism between SDD and Au(I) was further validated by density functional theory calculations. Considering its low cost, simple technology, and environmental friendliness, the SDD precipitation process has the potential for large-scale application in gold recovery from thiosulfate gold leaching solutions.

Adsorption Properties for La(III), Ce(III), and Y(III) with Poly(6-acryloylamino-hexyl hydroxamic acid) Resin

Using polyacrylic resin followed by the substitution reaction with 6-aminohexyl hydroxamic acid, poly(6-acryloylamino-hexyl hydroxamic acid) resin (PAMHA) was successfully synthesized. PAMHA, a spherical resin with the particle size of 0.4 mm, is a novel polyamide hydroxamic acid chelating resin containing acylamino and hydroxamic acid functional groups. A series of influences (pH, contact time, temperature, and the initial concentrations of rare earth ions) were investigated to determine the adsorption properties. The adsorption capacity for La(III), Ce(III), and Y(III) ions were 1.030, 0.962, and 1.450 mmol·g-1, respectively. Thermodynamic and kinetic studies were also carried out to show that the uptake of rare earth ions onto PAMHA fitted well the pseudo-second-order model and Langmuir isotherm, and the adsorption process was spontaneous endothermic. In addition, desorption of rare earth ions was achieved by using 2 mol·L-1 HNO3 and desorption efficiencies for La(III), Ce(III), and Y(III) ions were 98.4, 99.1, and 98.8%, respectively. Properties of PAMHA resin were characterized by scanning electron microscope (SEM), Fourier transform infrared spectrometry (FTIR), and X-ray photoelectron spectrometer (XPS). The results showed that there was coordination between the rare earth ions with PAMHA and rare metal ions were chemically adsorbed on the surface of the PAMHA.