THE EFFECT OF ALKANES ON THE FORMATION OF ULTRAFINE SILVER BROMIDE PARTICLES IN IONIC W/O MICROEMULSIONS

Zinc oxide nanoparticles: Synthesis, antiseptic activity and toxicity mechanism

Zinc oxide (ZnO), as a material with attractive properties, has attracted great interest worldwide, particularly owing to the implementation of the synthesis of nano-sized particles. High luminescent efficiency, a wide band gap (3.36eV), and a large exciton binding energy (60meV) has triggered intense research on the production of nanoparticles using different synthesis methods and on their future applications. ZnO nanomaterials can be used in industry as nano-optical and nano-electrical devices, in food packaging and in medicine as antimicrobial and antitumor agents. The increasing focus on nano zinc oxide resulted in the invention and development of methods of nanoparticles synthesis. Recently, various approaches including physical, chemical and biological ("green chemistry") have been used to prepare ZnO nanocomposites with different morphologies. The obtained nanoparticles can be characterized with a broad range of analytical methods including dynamic light scattering (DLS), electron microscopy (TEM, SEM), UV-VIS spectroscopy, X-ray diffraction (XRD) or inductively coupled plasma with mass spectrometry (ICP-MS). With these it is possible to obtain information concerning the size, shape and optical properties of nanoparticles. ZnO NPs exhibit attractive antimicrobial properties against bacteria (Gram-positive and Gram-negative) and fungi. Zinc oxide nanocomposites show also selective toxicity toward normal and cancerous cells, which is explained by reactive oxygen formation (ROS). Yet despite the potentially interesting antitumor activity of ZnO nanoparticles, it has been proven that they can be also cytotoxic and genotoxic for multiple types of human cells (i.e. neuronal or epithelial cells). This paper reviews the methods of synthesizing zinc oxide nanocomposites as well as their characteristics, antimicrobial activity and cytotoxicity against normal and tumor cells.

Underlying mechanisms in size control of uniform nanoparticles

Insights are given into underlying mechanisms for size control of uniform nanoparticles in liquid phases. At the outset, instead of the classical nucleation theories, which are hardly applicable to the size control of uniform particles, a fundamental equation for the nucleation of monodisperse particles, derived for their size control on the basis of the LaMer model, is introduced. This equation was derived on three assumptions: (1) There is a mass balance between the supply rate of solute and its consumption rate for nucleation and growth of the generated nuclei; (2) The supply rate of solute is independent of the subsequent precipitation events; (3) The nucleation rate is controlled only by the growth of the preformed nuclei at a fixed supply rate of solute. Thus, this nucleation theory is applicable to a system in which the precursor solute is supplied by slow irreversible generation in a closed system or by continuous feed from outside in an open system. However, it is inapplicable even if only one of these three assumptions is not fulfilled. Examples of applicable and inapplicable systems are listed, and finally discussion is focused on the underlying mechanisms of size control in some unique processes chosen from them, such as hydrolysis-induced precipitation of AgCl nanoparticles, double-jet precipitation of AgCl nanoparticles in a reverse micelle system to resolve the mechanism of particle formation in general reverse micelle systems, and a gel-sol process for the formation of nanoparticles of anatase TiO2.

A novel method for the preparation of silver chloride nanoparticles starting from their solid powder using microemulsions

A novel method of preparing AgCl nanoparticles by mixing AgCl powder and a microemulsion consisting of dioctyldimethylammonium chloride/n-decanol/water/isooctane is introduced. This new method was discovered during the preparation of AgCl nanoparticles in single microemulsions by direct reaction with the dioctyldimethylammonium chloride surfactant counterion. The effect of the following variables on the concentration of the colloidal AgCl nanoparticles (the nanoparticle uptake) and the particle size were studied: (1) operating variables, including mixing and temperature; and (2) microemulsion variables, including surfactant and cosurfactant concentration, and water to surfactant mole ratio. Manipulating these variables provides an insight into the role of the surfactant surface layer rigidity on the phenomenon. The results were explained by the effect of these variables on reaction rates and the colloidal nanoparticle stability. Mixing had a significant effect on the nanoparticle uptake. At 300 rpm an equilibrium AgCl nanoparticle uptake was achieved in about 1 h, while without mixing only 5% of the equilibrium value was reached even after 24 h. An optimum temperature was found for which a maximum nanoparticle uptake was obtained. At higher temperatures, the nanoparticle uptake declined. The nanoparticle uptake increased linearly with the surfactant concentration, and the particle size increased as well. A monotonic decrease in the nanoparticle uptake accompanied by an increase in the particle size was observed when increasing n-decanol concentration or the water to surfactant mole ratio.

Formation of silver bromide precipitate of nanoparticles in a single microemulsion utilizing the surfactant counterion

Silver bromide precipitate of nanoparticles was prepared by addition of silver nitrate aqueous solution to a single microemulsion system consisting of dioctyldimethylammonium bromide, n-decanol, and water in isooctane. The silver ion reacted readily with the surfactant counterion, bromide, to form the precipitate of nanoparticles, which was stabilized in the water pools. The use of the surfactant counterion as a reactant is a new approach to nanoparticle preparation in microemulsions. It is characterized by high reactivity and less dependency on the intermicellar exchange of solubilizate. The effects of the surfactant and the cosurfactant concentrations, the amount of silver nitrate, and the water to surfactant mole ratio, R, were evaluated. Increasing the surfactant concentration at fixed R and amount of silver nitrate enhanced the role of intermicellar nucleation and resulted in the formation of larger particles, while increasing the amount of silver nitrate at fixed values of all the other variables enhanced the direct nucleation and resulted in the formation of smaller particles. Particle aggregation and flocculation took place when the concentration of n-decanol or the value of R was increased. Particle aggregation and flocculation were attributed to the decrease in the interaction between the surfactant protective layer and the nanoparticles in the water pools.

Variation of surface properties and textural features of spinel ZnAl2O4 and perovskite LaMnO3 nanoparticles prepared via CTAB–butanol–octane–nitrate salt microemulsions in the reverse and bicontinuous states

Two binary oxides, a spinel, ZnAl2O4, and a typical perovskite, LaMnO3, have been prepared via CTAB-1-butanol-n-octane-nitrate salt microemulsion in the reverse and bicontinuous states. The exact point of the reverse and bicontinuous states of the microemulsion used in the synthesis was determined by conductivity experiments. The materials obtained after heating at 800 degrees C were characterized by XRD analysis for their crystal structure, N2 porosimetry for their surface area and porosity, and SEM and TEM photography for their texture. The ZnAl2O4 spinel obtained via the reverse microemulsion appears in SEM in a more fragmented form and with a higher specific surface area (143.7 m(2)g(-1)), compared to the corresponding solid prepared via the bicontinuous microemulsion, which appears more robust with lower surface area (126.7 m(2)g(-1)). Nevertheless both materials reveal in TEM a sponge-like structure. The perovskite materials LaMnO3 prepared via the reverse microemulsion showed in SEM a peculiar doughnut-like texture, each doughnut-like secondary particle having a diameter of 2 microm. The corresponding sample developed via the bicontinuous microemulsion showed in SEM uniform secondary particles of size approximately 0.2 microm. Both perovskite samples LaMnO3 appear well crystallized with relative low surface areas, 23.7 m(2)g(-1) for the reverse sample and 10.9 m(2)g(-1) for the bicontinuous one. The TEM photographs reveal that both of them, of reversed and bicontinuous origin, are made up of primary nanoparticles in the size range 40-100 nm. In SEM those materials showed a different secondary structure.

Dispersed Molecular Aggregates

Colloidal dispersions of tungstic acid (H(2)WO(4)) have been prepared in water/(TX-100+alkanol)/n-heptane water-in-oil microemulsion media by reacting Na(2)WO(4) with HCl. The effects of alkanol chain length, TX-100/alkanol mass ratio, temperature, and dilution at different [water]/[TX-100] mole ratios (omega) have been studied by the dynamic light scattering technique. The formation of H(2)WO(4) in the microwater pool has been established by FT-IR measurements. The particle sizes and shapes in microemulsion media and in isolated states have been measured by TEM and SEM techniques. The enthalpy of formation of H(2)WO(4) in the water pool of the microemulsions has also been determined microcalorimetrically. Copyright 2001 Academic Press.