Cytotoxicity of 5-fluorouracil entrapped in gelatin microspheres

Controllable Preparation and Performances of Monodisperse Genipin-Cross-Linked Gelatin-Chitosan Composite Embolic Microspheres

The controllable fabrication and performances of monodisperse genipin-cross-linked gelatin-chitosan composite (GGC) embolic microspheres with both uniform sizes and adjustable characteristics of elasticity and degradation are reported for the first time. Monodisperse emulsion droplets are fabricated as templates by using gelatin and chitosan aqueous solution as the disperse phase in a microfluidic device, and the chemical cross-linking of gelatin and chitosan inside droplet templates is achieved with genipin that transfers from the collection bath into the droplets. The sizes of droplet templates and the resultant GGC microspheres can be flexibly controlled and predicted by adjusting the fluid flow rates and the device dimensions. The elastic property of GGC microspheres can be flexibly regulated by adjusting the molar ratio of gelatin/chitosan in the disperse phase. The in vitro degradation-caused dynamic volume shrinkage of GGC microspheres can be flexibly regulated by adjusting the molar ratio of gelatin/chitosan, the chitosan deacetylation degree, and the enzyme concentration in degradation solution. Based on the Box-Behnken design-response surface method, a second-order equation is developed for the first time to predict the in vitro degradation-caused dynamic volume shrinkage ratios of microspheres prepared with different molar ratios of gelatin/chitosan and different chitosan deacetylation degrees in degradation solutions with different enzyme concentrations. The fabricated GGC microspheres show good repeatable embolization performances in an in vitro embolization chip system. The results of this study provide valuable guidance for controllable fabrication of degradable microspheres with both uniform sizes and on-demand elastic and degradation characteristics for efficient application in embolization therapy.

Gelatin microsphere-alginate hydrogel combined system for sustained and gastric targeted delivery of 5-fluorouracil

In the current study, novel gelatin microspheres/methacrylated alginate hydrogel combined system (5-FU-GELms/Alg-MA) was developed for gastric targeted delivery of 5-fluorouracil as an anticancer agent. While water-in-oil emulsification method was used for the production of 5-FU-GELms, Alg-MA was synthesized through methacrylation reaction occurred by epoxide ring-opening mechanism. Then, 5-FU-GELms/Alg-MA hydrogel system was fabricated by the encapsulation of 5-FU-GELms into Alg-MA hydrogel network via UV-crosslinking. To evaluate applicability of fabricated 5-FU-GELms/Alg-MA as gastric targeted drug delivery vehicle, both swelling and in vitro drug release experiments were carried out at pH 1.2 medium resembling gastric fluid. Compared to drug release directly from 5-FU-GELms, 5-FU-GELms/Alg-MA hydrogel system showed more controlled and sustained drug release profile with lower amount of cumulative release starting from early stages, since hydrogel matrix created a barrier to the diffusion of 5-FU included in microspheres. Drug release kinetic results obtained by applying various kinetic models to release data showed that the mechanism of 5-FU release from 5-FU-GELms/Alg-MA hydrogel system is controlled by Fickian diffusion. All results revealed that 5-FU-GELms/Alg-MA hydrogel integrated system could be potentially utilized as gastric targeted drug carrier to enhance therapeutic efficacy and reduce systemic side effects in gastric cancer treatments for future studies.

Bioinks-materials used in printing cells in designed 3D forms

Use of materials to activate non-functional or damaged organs and tissues goes back to early ages. The first materials used for this purpose were metals, and in time, novel materials such as ceramics, polymers and composites were introduced to the field to serve in medical applications. In the last decade, the advances in material sciences, cell biology, technology and engineering made 3D printing of living tissues or organ models in the designed structure and geometry possible by using cells alone or together with hydrogels through additive manufacturing. This review aims to give a brief information about the chemical structures and properties of bioink materials and their applications in the production of 3D tissue constructs.

pH-responsive nano carriers for doxorubicin delivery

PURPOSE

The aim of this study was to design stimuli-responsive nanocarriers for anti-cancer drug delivery. For this purpose, doxorubicin (DOX)-loaded, polysebacic anhydride (PSA) based nanocapsules (NC) were combined with pH-sensitive poly (L-histidine) (PLH).

METHOD

PSA nano-carriers were first loaded with DOX and were coated with poly L-histidine to introduce pH sensitivity. The PLH-coated NCs were then covered with polyethylene glycol (PEG) to reduce macrophage uptake. The drug release profile from this system was examined in two different buffer solutions prepared as acidic (pH5) and physiological (pH 7.4) media. The physical and chemical properties of the nanocapsules were characterized by Fourier transform infrared spectroscopy (FTIR), dynamic light scattering (DLS), ultraviolet and visible absorption spectroscopy (UV-VIS), and scanning electron microscopy (SEM). In vitro studies of the prepared nanocapsules were conducted in MDA-MB-231 breast cancer cells.

RESULTS

The results obtained by SEM and DLS revealed that nanocapsules have spherical morphology with an average size of 230 nm. Prepared pH sensitive nanocapsules exhibited pH-dependent drug release profile and promising intracellular release of drug. PEGylation of nanoparticles significantly prevented macrophage uptake compared to non-PEGylated particles.

Sterically stabilized gelatin microassemblies of noscapine enhance cytotoxicity, apoptosis and drug delivery in lung cancer cells

Noscapine, recently identified as anticancer due to its microtubule-modulating properties. It is presently in Phase I/II clinical trials. The therapeutic efficacy of noscapine has been established in several xenograft models. Its pharmacokinetic limitations such as low bioavailability and high ED50 impede development of clinically relevant treatment regimens. Here we present design, synthesis, in vitro and in vivo characterization of sterically stabilized gelatin microassemblies of noscapine (SSGMS) for targeting human non-small cell lung cancer A549 cells. The average size of the sterically stabilized gelatin microassemblies of noscapine, SSGMS was 10.0±5.1 μm in comparison to noscapine-loaded gelatin microassemblies, GMS that was 8.3±5.5 μm. The noscapine entrapment efficiency of SSGMS and GMS was 23.99±4.5% and 24.23±2.6%, respectively. Prepared microassemblies were spherical in shape and did not show any drug and polymer interaction as examined by FTIR, DSC and PXRD. In vitro release data indicated that SSGMS and GMS follow first-order release kinetics and exhibited an initial burst followed by slow release of the drug. In vitro cytotoxicity evaluated using A549 cells showed a low IC50 value of SSGMS (15.5 μM) compared to GMS (30.1 μM) and free noscapine (47.2 μM). The SSGMS can facilitate a sustained therapeutic effect in terms of prolonged release of noscapine as evident by caspase-3 activity in A549 cells. Concomitantly, pharmacokinetic and biodistribution analysis showed that SSGMS increased the plasma half-life of noscapine by ~9.57-fold with an accumulation of ~48% drug in the lungs. Our data provides evidence for the potential usefulness of SSGMS for noscapine delivery in lung cancer.

Nucleoside analogue delivery systems in cancer therapy

Nucleoside analogues (NAs) are important agents in the treatment of hematological malignancies. They are prodrugs that require activation by phosphorylation. Their rapid catabolism, cell resistance and overdistribution in the body jeopardize nucleoside analogue chemotherapy. Accordingly, therapeutic doses of NAs are particularly high and regularly have to be increased, resulting in severe toxicity and narrow therapeutic index. The major challenge is to concentrate the drug at the tumour site, avoiding its distribution to normal tissues. New drug carriers and biomaterials are being developed to overcome some of these obstacles. This review highlights novel NA delivery systems and discusses new technologies that could improve NA cancer therapy.

Preparation and properties of electrophoretic microcapsules for electronic paper

This paper shows two types of microcapsules used for electrophoretic display. One is prepared by in-situ polymerization which is based on urea, melamine and formaldehyde and another by complex coacervation, which is composed of gelatin and gum Arabic. Microcapsules attract interests of many research groups for longer lifetime of electrophoretic display by reducing agglomerization or lateral movements of nanoparticles. The gelatin microcapsules were more attractive in providing more uniform microcapsule coverage on electrodes due to their flexibility as compared to the melamine-urea microcapsules. The properties of microcapsules were characterized by FTIR, OM, SEM and TGA. Migration of nanoparticles in the two types of microcapsules was also observed when an electric field was applied.

Gelatin-methotrexate conjugate microspheres as a potential drug delivery system

Gelatin-methotrexate microspheres for intra-tumor administration have possibilities for minimizing systemic toxicities of methotrexate (MTX) and overcoming its resistance. Gelatin-MTX conjugates prepared by a carbodiimide reaction were crosslinked with glutaraldehyde to form microspheres (MTX:gelatin molar ratios of 2:1, 15:1, and 21:1). Microspheres were evaluated under in vitro tumor conditions at pH 6.5 and 37 degrees C with and without Cathepsin B (Cat B). Some microspheres were capped with an ethanolamine/cyanoborohydride procedure. SEM of broken microspheres revealed a hollow shell structure. Superficial Cat B degradation influenced some free MTX release but produced no conjugate fragment release. HPLC measured release of fragments (<10 kDa) was very little and release of free MTX was small. However, higher drug load microspheres released less free MTX than lower drug load, a substantial lag phase of free MTX release from capped microspheres changed to an initial rapid release in uncapped microspheres, and fragments were only released from uncapped microspheres. Opened unstable Schiff base crosslinks in uncapped microspheres may allow enzyme to produce conjugate fragments not observed in capped microspheres. Free MTX release may occur from dissolved uncrosslinked conjugate within the hollow microspheres. Important relationships and observations are described that will be useful for gelatin and perhaps other proteinaceous microspheres.

Preparation and characterization of a biodegradable drug targeting system for anticancer drug delivery: microsphere-antibody conjugate

Targeted delivery of anticancer drugs is one of the most actively pursued goals in anticancer chemotherapy. A major disadvantage of anticancer drugs is their lack of selectivity for tumour tissue, which causes severe side effects and results in low cure rates. Any strategy by which a cytotoxic drug is targeted to the tumour, thus increasing the therapeutic index of the drug, is a way of improving cancer chemotherapy and minimizing systematic toxicity. This study covers the preparation of the gelatin microsphere (GM)-anti-bovine serum albumin (anti-BSA) conjugate for the development of a drug targeting approach for anticancer drug delivery. Microspheres of 5% (w/v) gelatin content were prepared by crosslinking with glutaraldehyde (GTA) at 0.05 and 0.50% (v/v) concentration. Microspheres were in the size range of 71-141?microm. The suitability of these microspheres as drug carriers for anticancer drug delivery was investigated in vitro by studying the release profiles of loaded methotrexate (MTX) and 5-fluorouracil (5-FU) and the cytotoxicities on cancer cell lines. The in vitro MTX release profiles (approximately 22-46% released in 24 h depending on the amount of GTA used) were much slower compared to 5-FU (approximately 42-91% released in 24 h). Both drugs demonstrated an initial fast release, which was followed by gradual, sustained drug release. The MTT cytotoxicity test results of GMs loaded with 5-FU and MTX showed approximately 54-70% and approximately 52-67% cytotoxicities in 4 days. In general, incorporation of MTX and 5-FU in microspheres enhanced the cytotoxic effect in a more prolonged manner compared to the free drugs. Gelatin micospheres were chemically conjugated to anti-BSA and the antigen-antibody activities were studied by immunofluorescence. Results indicated approximately 80% binding with conjugated anti-BSA and BSA-FITC. Based on their low cytotoxicity and the high antigen binding efficiencies, anti-BSA conjugated gelatin microspheres could be suitable targeted drug carrier systems for selective and long-term delivery of anticancer drugs to a specific body compartment (i.e. bladder cancer).