Busulphan-loaded long-circulating nanospheres, a very attractive challenge for both galenists and pharmacologists

Biosynthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) as biocompatible microcapsules with extended release for busulfan and montelukast

An extended release dosage form based on encapsulating the challenging drug busulfan within microspheres of the biodegradable, biocompatible and biosynthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) polyester was achieved. The used (PHBV) polymer was biosynthesized by the halophilic archaeon Haloferax mediterranei from date waste biomass as feed-stock. PHBV microspheres of 1.2-2.1 μm diameter were successfully fabricated and loaded with busulfan with an encapsulation efficiency of 29.2 ± 0.2%. In addition, PHBV microspheres of 1.5-3.5 μm diameter and loaded with montelukast sodium (MK) drug were also fabricated with an encapsulation efficiency of 16.0 ± 0.4%. The double-emulsion solvent evaporation method was used to fabricate the drug-loaded microspheres. The drug-loaded microspheres have been characterized by XRD, FTIR and SEM, and confirmed to be successfully fabricated. The drugs in vitro release profiles have shown extended release for up to 3 days in case of busulfan and 8 h in case of montelukast sodium. The in vitro release profiles for busulfan and montelukast suggest that these drug-loaded microcapsules can be efficiently used as new dosage forms to solve the current issues of busulfan administration protocols, and to introduce a new dosage form for montelukast with extended release performance.

Biodegradable polymeric nanoparticles administered in the cerebrospinal fluid: Brain biodistribution, preferential internalization in microglia and implications for cell-selective drug release

Cell-selective drug release in the central nervous system (CNS) holds great promise for the treatment of many CNS disorders but it is still challenging. We previously demonstrated that polymeric nanoparticles (NPs) injected intra-parenchyma in the CNS can be internalized specifically in microglia/macrophages surrounding the injection site. Here, we explored NPs administration in the cerebrospinal fluid (CSF) to achieve a wider spreading and increased cell targeting throughout the CNS; we generated new NPs variants and studied the effect of modifying size and surface charge on NPs biodistribution and cellular uptake. Intra-cerebroventricular administration resulted in prevalent localization of the NPs in proximity to stem-cell niches, such as around the lateral ventricles, the subventricular zone and the rostral migratory stream. NPs internalization occurred preferentially in brain myeloid cells/microglia. We demonstrated that brain biodistribution and extent of internalization in microglia are influenced by NPs dimensions and can be improved by applying a transient disruption of the blood-brain barrier with mannitol, leading to NPs internalization in up to 25% of brain myeloid/microglia cells. A fraction of the targeted cells was positive for markers of proliferation or stained positive for stemness/progenitor-cell markers such as Nestin, c-kit, or NG2. Interestingly, through these newly formulated NPs we obtained controlled and selective release of drugs otherwise difficult to formulate (such as busulfan and etoposide) to the target cells, preventing unwanted side effects and the toxicity obtained by direct brain delivery of the not encapsulated drugs. Overall, these data provide proof of concept of the applicability of these novel NP-based drug formulations for achieving internalization not only in mature microglia but also possibly in more immature myeloid cells in the brain and pave the way for brain-restricted microglia-targeted drug delivery regimens.

How to unravel the chemical structure and component localization of individual drug-loaded polymeric nanoparticles by using tapping AFM-IR

AFM-IR is a photothermal technique that combines AFM and infrared (IR) spectroscopy to unambiguously identify the chemical composition of a sample with tens of nanometer spatial resolution. So far, it has been successfully used in contact mode in a variety of applications. However, the contact mode is unsuitable for soft or loosely adhesive samples such as polymeric nanoparticles (NPs) of less than 200 nm of wide interest for biomedical applications. We describe here the theoretical basis of the innovative tapping AFMIR mode that can address novel challenges in imaging and chemical mapping. The new method enables gaining information not only on NP morphology and composition, but also reveals drug location and core-shell structures. Whereas up to now the locations of NP components could only be hypothesized, tapping AFM-IR allows accurately visualizing both the location of the NPs' shells and that of the incorporated drug, pipemidic acid. The preferential accumulation of the drug in the NPs' top layers was proved, despite its low concentration (<1 wt%). These studies pave the way towards the use of tapping AFM-IR as a powerful tool to control the quality of NP formulations based on individual NP detection and component quantification.

Nanoparticles with high payloads of pipemidic acid, a poorly soluble crystalline drug: drug-initiated polymerization and self-assembly approach

Nowadays, biodegradable polymers such as poly(lactic acid) (PLA), poly(D,L-lactic-co-glycolic acid) (PLGA) and poly(ε-caprolactone) (PCL) remain the most common biomaterials to produce drug-loaded nanoparticles (NPs). Pipemidic acid (PIP) is a poorly soluble antibiotic with a strong tendency to crystallize. PIP incorporation in PLA/PLGA NPs was challenging because of PIP crystals formation and burst release. As PIP had a poor affinity for the NPs, an alternative approach to encapsulation was used, consisting in coupling PIP to PCL. Thus, a PCL-PIP conjugate was successfully synthesized by an original drug-initiated polymerization in a single step without the need of catalyst. PCL-PIP was characterized by NMR, IR, SEC and mass spectrometry. PCL-PIP was used to prepare self-assembled NPs with PIP contents as high as 27% (w/w). The NPs were characterized by microscopy, DLS, NTA and TRPS. This study paves the way towards the production of NPs with high antibiotic payloads by drug-initiated polymerization. Further studies will deal with the synthesis of novel polymer-PIP conjugates with ester bonds between the drug and PCL. PIP can be considered as a model drug and the strategy developed here could be extended to other challenging antibiotics or anticancer drugs and employed to efficiently incorporate them in NPs.

Combination therapy for tuberculosis treatment: pulmonary administration of ethionamide and booster co-loaded nanoparticles

Tuberculosis (TB) is a leading infectious cause of death worldwide. The use of ethionamide (ETH), a main second line anti-TB drug, is hampered by its severe side effects. Recently discovered "booster" molecules strongly increase the ETH efficacy, opening new perspectives to improve the current clinical outcome of drug-resistant TB. To investigate the simultaneous delivery of ETH and its booster BDM41906 in the lungs, we co-encapsulated these compounds in biodegradable polymeric nanoparticles (NPs), overcoming the bottlenecks inherent to the strong tendency of ETH to crystallize and the limited water solubility of this Booster. The efficacy of the designed formulations was evaluated in TB infected macrophages using an automated confocal high-content screening platform, showing that the drugs maintained their activity after incorporation in NPs. Among tested formulations, "green" β-cyclodextrin (pCD) based NPs displayed the best physico-chemical characteristics and were selected for in vivo studies. The NPs suspension, administered directly into mouse lungs using a Microsprayer®, was proved to be well-tolerated and led to a 3-log decrease of the pulmonary mycobacterial load after 6 administrations as compared to untreated mice. This study paves the way for a future use of pCD NPs for the pulmonary delivery of the [ETH:Booster] pair in TB chemotherapy.

Antineoplastic busulfan encapsulated in a metal organic framework nanocarrier: first in vivo results

Nanoparticles of a mesoporous iron(iii) trimesate MIL-100 nanocarrier encapsulating high amounts of the challenging antineoplastic busulfan were administered to rats and compared with the commercial Busilvex®.

Porous metal organic framework nanoparticles to address the challenges related to busulfan encapsulation

Busulfan is an alkylating agent widely used in chemotherapy, but with severe side effects. Many attempts have been made to entrap busulfan in nanocarriers to avoid liver accumulation and to protect it against rapid degradation in aqueous media. However, poor loadings (≤5 wt%) and fast release were generally obtained due to the low affinity of busulfan towards the nanocarriers. Moreover, drug crystallization often occurred during nanoparticle preparation. To circumvent these drawbacks, metal organic framework (MOF) nanoparticles, based on crystalline porous iron (III) carboxylates, have shown an unprecedented loading (up to 25 wt%) of busulfan. This was attributed to the high porosity of nanoMOFs as well as to their hydrophilic–hydrophobic internal microenvironment well adapted to the amphiphilic character of busulfan. NanoMOFs formulations have kept busulfan in molecular form, preventing its crystallization and degradation. Indeed, busulfan was released intact, as proved by the maintenance of its pharmacological activity.