Cryoprotectant choice and analyses of freeze-drying drug suspension of nanoparticles with functional stabilisers

Preparation and Optimization of MiR-375 Nano-Vector Using Two Novel Chitosan-Coated Nano-Structured Lipid Carriers as Gene Therapy for Hepatocellular Carcinoma

Currently, there is still a lack of effective carriers with minimal side effects to deliver therapeutic miRNA. Thus, it is crucial to optimize novel drug delivery systems. MiR-375 has proven superior therapeutic potency in Hepatocellular carcinoma (HCC). The purpose of this study was to fabricate 2 novel and smart nano-carriers for the transportation efficiency of miR-375 in HCC cells and enhance its anti-tumor effects. We established the miR-375 construct through the pEGP- miR expression vector. Two nano-carriers of solid/liquid lipids and chitosan (CS) were strategically selected, prepared by high-speed homogenization, and optimized by varying nano-formulation factors. Thus, the two best nano-formulations were designated as F1 (0.5% CS) and F2 (1.5% CS) and were evaluated for miR-375 conjugation efficiency by gel electrophoresis and nanodrop assessment. Then, physio-chemical characteristics and stability tests for the miR-375 nano-plexes were all studied. Next, its efficiencies as replacement therapy in HepG2 cells have been assessed by fluorescence microscopy, flow cytometry, and cytotoxicity assay. The obtained data showed that two cationic nanostructured solid/liquid lipid carriers (NSLCs); F1 and F2 typically had the best physio-chemical parameters and long-term stability. Moreover, both F1 and F2 could form nano-plexes with the anionic miR-375 construct at weight ratios 250/1 and 50/1 via electrostatic interactions. In addition, these nano-plexes exhibited physical stability after three months and protected miR-375 from degradation in the presence of 50% fetal bovine serum (FBS). Furthermore, both nano-plexes could simultaneously deliver miR-375 into HepG2 cells and they ensure miR re-expression even in the presence of 50% FBS compared to free miR-375 (p-value < 0.001). Moreover, both F1 and F2 alone significantly exhibited minimal cytotoxicity in treated cells. In contrast, the nano-plexes significantly inhibited cell growth compared to free miR-375 or doxorubicin (DOX), respectively. More importantly, F2/miR-375 nano-plex exhibited more anti-proliferative activity in treated cells although its IC50 value was 55 times lower than DOX (p-value < 0.001). Collectively, our findings clearly emphasized the multifunctionality of the two CS-coated NSLCs in terms of their enhanced biocompatibility, biostability, conjugation, and transfection efficiency of therapeutic miR-375. Therefore, the NSLCs/miR-375 nano-plexes could serve as a novel and promising therapeutic strategy for HCC.

Herpetetrone nanosuspensions enhance drug solubility and bioavailability to improve anti-hepatic fibrosis effects

The aim of this study was to enhance the dissolution rate and oral bioavailability of herpetetrone (HPT) by preparing nanosuspensions (NSs) and evaluate the changes in its anti-hepatic fibrosis effect. Herpetetrone nanosuspension (HPT-NS) was prepared using the ultrasound-precipitation technique, and characterised on the basis of mean diameter, zeta potential (ZP), encapsulation efficiency percent (EE%), scanning electron microscopy (SEM), and X-ray powder diffraction (XRPD). In addition, the pharmacokinetics and anti-hepatic fibrosis activity were evaluated. HPT-NS prepared with the optimised formulation was found to be spherical with mean diameter of 177.48 ± 6.13 nm, polydispersity index (PDI) of 0.108 ± 0.002 and ZP of -17.28 ± 2.02 mV. The EE (m/m, %) was 83.25 ± 0.27. XRPD analyses confirmed that the amorphous state of HPT in HPT-NS remained unchanged. The dissolution rate of HPT-NS was significantly higher than that of HPT coarse suspensions (HPT-CSs). Following oral administration, Cmax and AUC0-t of HPT-NS showed a significant increase (p < 0.05). In vitro, HPT inhibited the proliferation of HSC-T6 cells and induced apoptosis by up-regulating the expression of Bax proteins and down-regulating the expression of Bcl-2 and TGF-β1 proteins. Compared with HPT-CS, HPT-NS exhibited a more pronounced anti-fibrotic effect. HPT-NS, as a new drug formulation designed to improve the solubility and bioavailability of the drug, shows promising potential in enhancing the anti-liver fibrosis effect.

Different Size Formulations of Fluopyram: Preparation, Antifungal Activity, and Accumulation in the Fungal Pathogen Botrytis cinerea

Nanotechnology is revolutionizing the efficient production and sustainable development of modern agriculture. Understanding the pesticide activity of both nano- and conventional methods is useful for developing new pesticide formulations. In this study, three solid fluopyram formulations with varying particle sizes were developed, and the mechanisms underlying the difference in the antifungal activity among these formulations were investigated. Wet media milling combined with freeze drying was used to prepare fluopyram nanoparticles (FLU-NS) and a micron-sized solid formulation (FLU-MS), and a jet grinding mill was employed to fabricate fluopyram wettable powder (FLU-WP). The mean particle sizes of FLU-NS, FLU-MS, and FLU-WP were 366.8 nm, 2.99 μm, and 10.16 μm, respectively. Notably, FLU-NS displayed a toxicity index against Botrytis cinerea (gray mold) that was approximately double those of FLU-MS and FLU-WP. Similar trends were noticed in the antifungal tests on Alternaria solani. The uptake of FLU-NS by B. cinerea was approximately twice that of FLU-MS and FLU-WP, indicating that fluopyram nanoparticles are more easily taken up by the pathogen (B. cinerea), and display better bioactivity than the larger fluopyram particles. Therefore, the nanosizing of pesticides appears to be a viable strategy to enhance efficiency without increasing the amount of pesticide used.

Intravenous nanocrystals: fabrication, solidification, in vivo fate, and applications for cancer therapy

INTRODUCTION

Intravenous nanocrystals (INCs) have shown intrinsic advantages in antitumor applications, particularly their properties of high drug loading, low toxicity, and controllable size. Therefore, it has a very bright application prospect as a drug delivery system.

AREAS COVERED

The ideal formulation design principles, fabrication, solidification, in vivo fate of INCs, the applications in drug delivery system (DDS) and the novel applications are covered in this review.

EXPERT OPINION

It is vital to select a suitable formulation and fabrication method to produce a stable and sterile INCs. Besides, the type of stabilizers and physical characteristics can also influence the in vivo fate of INCs, which is worthy of further studying. Based on wide researches about applications of INCs in cancer, biomimetic INCs are concerned increasingly for its favorable compatibility. The output of these studies suggested that INCs-based drug delivery could be a novel strategy for addressing the delivery of the drug that faces solubility, bioavailability, and toxicity problems.

Impact of formulation design and lyophilisation on the physicochemical characteristics of finasteride nanosystems

The fundamental purpose of this study was to develop a stable lyophilised finasteride nanosystem (FNS-NS) for topical delivery. The FNS-NS was fabricated using an ultrasonication technique. The impact of two different cryoprotectants on the physicochemical characteristics of FNS-NS before and after lyophilisation was thoroughly investigated. The lyophilised FNS-NS had spherical shape with particle size lied between 188.6 nm ± 4.4 and 298.7 nm ± 4.7, low PDI values (0.26 ± 0.02 to 0.32 ± 0.02) and zeta potential ranging from -38.3 to +53.3 mV. The confocal laser microscopy depicted a comparatively higher cellular internalisation achieved for undecorated FNS-NS with respect to its chitosan-decorated counterpart. The lyophilised FNS-NS was stable for 90 days at proper storage conditions. The FNS-NS with 15% trehalose had appropriate physicochemical attributes that could be a promising carrier for topical delivery to treat androgenic alopecia.

Freeze Drying of Polymer Nanoparticles and Liposomes Exploiting Different Saccharide-Based Approaches

Biodegradable nanocarriers represent promising tools for controlled drug delivery. However, one major drawback related to their use is the long-term stability, which is largely influenced by the presence of water in the formulations, so to solve this problem, freeze-drying with cryoprotectants has been proposed. In the present study, the influence of the freeze-drying procedure on the storage stability of poly(lactide-co-glycolide) (PLGA) nanoparticles and liposomes was evaluated. In particular, conventional cryoprotectants were added to PLGA nanoparticle and liposome formulations in various conditions. Additionally, hyaluronic acid (HA), known for its ability to target the CD44 receptor, was assessed as a cryoprotective excipient: it was added to the nanocarriers as either a free molecule or conjugated to a phospholipid to increase the interaction with the polymer or lipid matrix while exposing HA on the nanocarrier surface. The formulations were resuspended and characterized for size, polydispersity index, zeta potential and morphology. It was demonstrated that only the highest percentages of cryoprotectants allowed the resuspension of stable nanocarriers. Moreover, unlike free HA, HA-phospholipid conjugates were able to maintain the particle mean size after the reconstitution of lyophilized nanoparticles and liposomes. This study paves the way for the use of HA-phospholipids to achieve, at the same time, nanocarrier cryoprotection and active targeting.

Nanosuspension: A Formulation Technology for Tackling the Poor Aqueous Solubility and Bioavailability of Poorly Soluble Drugs

The poor water solubility of numerous novel drug candidates presents significant challenges, particularly in terms of oral administration. This limitation can result in various undesirable clinical implications, such as inter-patient variability, poor bioavailability, difficulties in achieving a safe therapeutic index, increased costs, and potential risks of toxicity or inefficacy. Biopharmaceutics Classification System (BCS) class II drugs face particular hurdles due to their limited solubility in the aqueous media of the gastrointestinal tract. In such cases, parenteral administration is often employed as an alternative strategy. To address these challenges, nanosuspension techniques offer a promising solution for enhancing drug solubility and overcoming oral delivery obstacles. This technique has the potential to bridge the gap between drug discovery and preclinical use by resolving problematic solubility. This literature review has delved into contemporary nanosuspension preparation technologies and the incorporation of stabilizing ingredients within the formulation. Furthermore, the manuscript explores nanosuspension strategies for both oral and parenteral/other delivery routes, and separate discussions have been presented to establish a suitable flow that addresses the challenges and strategies relevant to each administration method.

Optimization of storage conditions for lipid nanoparticle-formulated self-replicating RNA vaccines

The recent clinical success of multiple mRNA-based SARS-CoV-2 vaccines has proven the potential of RNA formulated in lipid nanoparticles (LNPs) in humans, and products based on base-modified RNA, sequence-optimized RNA, and self-replicating RNAs formulated in LNPs are all in various stages of clinical development. However, much remains to be learned about critical parameters governing the manufacturing and use of LNP-RNA formulations. One important issue that has received limited attention in the literature to date is the identification of optimal storage conditions for LNP-RNA that preserve long-term activity of the formulations. Here, we analyzed the physical structure, in vivo expression characteristics, and functional activity of alphavirus-derived self-replicating RNA (repRNA)-loaded LNPs encoding HIV vaccine antigens following storage in varying temperatures, buffers, and in the presence or absence of cryoprotectants. We found that for lipid nanoparticles with compositions similar to clinically-used LNPs, storage in RNAse-free PBS containing 10% (w/v) sucrose at -20 °C was able to maintain vaccine stability and in vivo potency at a level equivalent to freshly prepared vaccines following 30 days of storage. LNPs loaded with repRNA could also be lyophilized with retention of bioactivity.

The Preparation of Apigenin Nanoparticles and the Study of Their Anti-Inflammatory and Anti-Tumor Activities In Vitro

Apigenin (API) has many biological activities, but its poor solubility limits its clinical application. In this research, API nanoparticles were prepared by the liquid antisolvent precipitation (LAP) technique, which effectively improved the solubility and bioavailability of API. Through the design of a single-factor test, the effects of the type and dosage of surfactants, API concentration, the antisolvent to solvent volume ratio, the speed and time of stirring, the temperature of precipitation, and the dropping speed on the MPS (mean particle size) of API nanosuspension were carried out. The optimum technological conditions were determined as follows: 5 mg/mL of tween 80 as a surfactant, 20 mg/mL of API, an antisolvent/solvent volume ratio of 10, a 1200 r/min stirring speed for 5 min, a 45 °C precipitation temperature, and a 1 mL/min dropping speed. Under the optimum conditions, we obtained API nanosuspension with 170.5 nm MPS and then it was freeze-dried to obtain the API nanoparticles. Moreover, we characterized the API nanoparticles by SEM, FTIR, XRD, DSC, and TG. Results showed that although API nanoparticles transformed into an amorphous form, their internal chemical structure had not been changed and had a higher solubility. Finally, API nanoparticles’ anti-inflammatory activities were evaluated by observing the effect of API on nitric oxide (NO) production and IL-10 production toward RAW264.7 cells induced by lipopolysaccharide (LPS). Moreover, the anti-tumor effect of API was determined by testing cell viability and apoptosis. The results suggested that API nanoparticles exhibited much better anti-inflammatory and anti-tumor activities compared to raw API.

The Impact of Process and Formulation Parameters on the Fabrication of Efavirenz Nanosuspension to Improve Drug Solubility and Dissolution

Background

Efavirenz nanosuspensions (EZ-NSs) were developed by the wet milling method as the most promising top-down nanosizing technique. Different process and formulation parameters were studied and optimized to produce appropriate EZ-NS in suitable conditions to enhance drug dissolution.

Methods

In the preliminary studies, various polymeric stabilizers, including Pluronic F68, sodium carboxymethylcellulose (CMC), hydroxypropyl methylcellulose (HPMC), and polyvinyl alcohol (PVA), as well as different sizes and weight of milling beads were used to prepare NSs. The effect of sodium lauryl sulfate (SLS) concentration on the NS properties was also evaluated. The influence of other formulation and process parameters, including polymer concentration, milling speed, and milling time, on the particle size and distribution of NSs were investigated using Box-Behnken design. The optimized freeze-dried nanosuspension was characterized by redispersibility, physicochemical properties, and stability.

Results

A combination of PVA and SLS was selected as steric and electrostatic stabilizers. The optimum EZ-NS displayed a uniform size distribution with a mean particle size and zeta potential of 254.4 nm and 21.1 mV, respectively. The solidified nanosuspension was well redispersed to the original nanoparticles. Significantly enhanced aqueous solubility (about 11-fold) and accelerated dissolution rate were observed for the optimized formulation. This could be attributed to the reduced particle size and partial amorphization of EZ during the preparation process, studied by X-ray diffraction. Accelerated studies confirmed the stability of the optimum freeze-dried formulation over the examined period of three months.

Conclusions

Optimization of different variables led to the formation of EZ-NSs with desired properties through wet milling in a very short time compared to the previous study and therefore reduced production costs. This formulation seems to be a suitable approach for solubility and dissolution enhancement of EZ and may have a great potential to improve the drug's oral bioavailability.

Drug Transport System Based on Phospholipid Nanoparticles: Production Technology and Characteristics

One of the current trends in modern pharmaceuticals is the supply of drugs by transport systems. The use of delivery systems allows to increase the therapeutic efficacy, tolerability, and safety of drug therapy. Liposomes, polymer nanoparticles, carbon nanoparticles, blood cells, metal nanoparticles, oxides, etc., are used as transport systems. This work is aimed at obtaining a finished technological product based on soy phospholipids with particle size in the nanometer range and reproducible characteristics (size, charge). For this purpose, we carried out investigations to select the optimal conditions of technological process. The developed technology makes it possible to obtain phospholipid nanoparticles without the use of any solubilizers and/or surfactants, which increases its practical relevance for further work. The versatility of the technology is demonstrated by the example of incorporation of drugs of various chemical nature and pharmacotherapeutic groups.

Recent Advances in Freeze-Drying: Variables, Cycle Optimization, and Innovative Techniques

Freeze-drying (FD) is the most substantial drying technique utilized in the pharmaceutical and biopharmaceutical industries. It is a drying process where the solvent is crystallized at low temperatures and then sublimed from the solid-state directly into the vapor phase. Although FD possesses several merits as its suitability for thermolabile materials and its ability to produce dry products with high-quality attributes, it is a complex and prolonged process that requires optimization of both; process and formulation variables. This review attains to disassemble freeze-drying complications through a detailed explanation of the lyophilization concept, stages, the factors influencing the process including controlled ice nucleation, and the modified and innovative freeze-drying technologies proposed in recent years to overcome the shortage of traditional freeze-drying. In addition, this work points out the quality by design (QbD), critical quality of attributes (CQAs), limitations, and drawbacks of lyophilization.HighlightsLyophilization is a propitious drying technique for thermolabile materials.Optimizing the lyophilization cycle requires controlling the process parameters.The formulation excipients and the dispersion medium play crucial roles in designing a successful process.Numerous approaches were developed to ameliorate the lyophilization performance.

Ciprofloxacin-Loaded Zein/Hyaluronic Acid Nanoparticles for Ocular Mucosa Delivery

Bacterial conjunctivitis is a worldwide problem that, if untreated, can lead to severe complications, such as visual impairment and blindness. Topical administration of ciprofloxacin is one of the most common treatments for this infection; however, topical therapeutic delivery to the eye is quite challenging. To tackle this, nanomedicine presents several advantages compared to conventional ophthalmic dosage forms. Herein, the flash nanoprecipitation technique was applied to produce zein and hyaluronic acid nanoparticles loaded with ciprofloxacin (ZeinCPX_HA NPs). ZeinCPX_HA NPs exhibited a hydrodynamic diameter of <200 nm and polydispersity index of <0.3, suitable for ocular drug delivery. In addition, the freeze-drying of the nanoparticles was achieved by using mannitol as a cryoprotectant, allowing their resuspension in water without modifying the physicochemical properties. Moreover, the biocompatibility of nanoparticles was confirmed by in vitro assays. Furthermore, a high encapsulation efficiency was achieved, and a release profile with an initial burst was followed by a prolonged release of ciprofloxacin up to 24 h. Overall, the obtained results suggest ZeinCPX_HA NPs as an alternative to the common topical dosage forms available on the market to treat conjunctivitis.

Anhydrous Nucleic Acid Nanoparticles for Storage and Handling at Broad Range of Temperatures

Recent advances in nanotechnology now allow for the methodical implementation of therapeutic nucleic acids (TNAs) into modular nucleic acid nanoparticles (NANPs) with tunable physicochemical properties which can match the desired biological effects, provide uniformity, and regulate the delivery of multiple TNAs for combinatorial therapy. Despite the potential of novel NANPs, the maintenance of their structural integrity during storage and shipping remains a vital issue that impedes their broader applications. Cold chain storage is required to maintain the potency of NANPs in the liquid phase, which greatly increases transportation costs. To promote long-term storage and retention of biological activities at higher temperatures (e.g., +50 °C), a panel of representative NANPs is first exposed to three different drying mechanisms-vacuum concentration (SpeedVac), lyophilization (Lyo), and light-assisted drying (LAD)-and then rehydrated and analyzed. While SpeedVac primarily operates using heat, Lyo avoids temperature increases by taking advantage of pressure reduction and LAD involves a near-infrared laser for uniform drying in the presence of trehalose. This work compares and defines refinements crucial in formulating an optimal strategy for producing stable, fully functional NANPs and presents a forward advancement in their development for clinical applications.

Nanostructured polyelectrolyte complexes based on chitosan and sodium alginate containing rifampicin for the potential treatment of tuberculosis

Nanostructured polyelectrolyte complexes (nano PECs) were obtained by polyelectrolyte complexation technique from chitosan (CS) and sodium alginate (SA). Different polymer proportions were tested, as well as the addition order and homogenization type, to assess the influence on the nano PECs characteristics. The spherical shape and nanometric scale of the systems were observed by scanning electron microscopy (SEM). Nano PECs size, PDI and zeta potential ranged from 252 to 616 nm, from 0.22 to 0.73 and -50 to 30 mV, respectively. The increase of polymer proportion and the ultra-turrax homogenization led to the enlargement of particles size and PDI. However, no influence was observed on the zeta potential. The NP1s-Rb and NP4s-Rb, obtained through the sonicator with rifampicin (RIF) added before the CS and SA complexation, were selected due to the most promising characteristics of diameter (301 and 402 nm), PDI (0.27 and 0.26) and RIF incorporation (78 and 69%,). The release profiles of RIF incorporated in both nano PECs were similar, with a sustained release of the drug for 180 minutes in phosphate buffer pH (7.2). The Weibull and the Korsmeyer-Peppas models better describe the RIF release from NP1s-Rb and NP4s-Rb, respectively, demonstrating that the release process was driven by different mechanism according the particle composition. The nano PECs were lyophilized to prolong it stability and for possible nebulization. The addition of dextrose to the system allowed for resuspension after lyophilization. Therefore, with the results obtained, the incorporation of RIF in nano PECs based on CS and SA presents a promising system for the treatment of tuberculosis.

Stabilization by Nano Spray Dryer of Pioglitazone Polymeric Nanosystems: Development, In Vivo, Ex Vivo and Synchrotron Analysis

Pioglitazone-loaded PLGA-PEG nanoparticles (NPs) were stabilized by the spray drying technique as an alternative to the treatment of ocular inflammatory disorders. Pioglitazone-NPs were developed and characterized physiochemically. Interaction studies, biopharmaceutical behavior, ex vivo corneal and scleral permeation, and in vivo bioavailability evaluations were conducted. Fibrillar diameter and interfibrillar corneal spacing of collagen was analyzed by synchrotron X-ray scattering techniques and stability studies at 4 °C and was carried out before and after the spray drying process. NPs showed physicochemical characteristics suitable for ocular administration. The release was sustained up to 46 h after drying; ex vivo corneal and scleral permeation profiles of pioglitazone-NPs before and after drying demonstrated higher retention and permeation through cornea than sclera. These results were correlated with an in vivo bioavailability study. Small-angle X-ray scattering (SAXS) analysis did not show a significant difference in the organization of the corneal collagen after the treatment with pioglitazone-NPs before and after the drying process, regarding the negative control. The stabilization process by Nano Spray Dryer B-90 was shown to be useful in preserving the activity of pioglitazone inside the NPs, maintaining their physicochemical characteristics, in vivo bioavailability, and non-damage to corneal collagen function after SAXS analysis was observed.

Effects of Organic Acids on Drug Release From Ternary Polypeptide Nanoparticles Entrapping Carfilzomib

Carfilzomib (CFZ) is an FDA-approved proteasome inhibitor with antineoplastic properties against various cancers, yet its short blood retention time after intravenous injection (< 30 min) makes clinical applications limited to multiple myeloma. We previously developed ternary polypeptide nanoparticles (tPNPs) as a new nanoparticle formulation of CFZ to overcome these limitations. The formulation was prepared by polyion complexation between poly(ethylene glycol)-poly(L-glutamate) block copolymers (PEG-PLE) and CFZ-cyclodextrin (CD) inclusion complexes, where CDs were positively charged with 7 primary amines attached while PEG-PLE carried 100 carboxyl groups per polymer chain. Although tPNPs greatly improved biostability of CFZ, CFZ-loaded tPNPs (CFZ-tPNPs) still showed burst drug release and mediocre drug retention under physiological conditions. To address these issues, organic acids are tested as stabilizers in this study to improve particle stability and drug retention for tPNPs. Charge densities in the core of CFZ-tPNPs were optimized with selected organic acids such as citric acid (CA) and lactic acid (LA) at varying mixing ratios. Organic acids successfully maintained small particle size suitable for intravenous injection and drug delivery (diameters < 60 nm), improved CFZ solubility (> 1 mg/mL), allowed for lyophilization and easy reconstitution in various buffers, enhanced drug retention (> 60% post 24 h incubation), and suppressed burst drug release in the first 6 h following solubilization. These results demonstrate that organic acid stabilized tPNPs are useful as an injection formulation of CFZ, which may expand the utility of the proteasome inhibitor.

Phospholipid/zein hybrid nanoparticles as promising carriers for the protection and delivery of all-trans retinoic acid

A totally biodegradable mixed system made up of phospholipids and zein was developed in order to effectively improve the photostability of all-trans retinoic acid (ATRA) preserving its pharmacological properties. Photon correlation spectroscopy showed that the formulation obtained using phospholipon 85G and zein at a ratio of 7:3 w/w was characterized by an average diameter of less than 200 nm, a narrow size distribution and a significant time- and temperature-dependent stability. The use of specific cryoprotectants such as mannose and glucose favoured the long-term storage of the nanocarriers after the freeze-drying procedure. The nanoparticles increased the stability of the ATRA against photochemical degradation with respect to the free drug and its antitumor effect was preserved as a consequence of the cell uptake of the colloidal systems. The results demonstrate the potential of the proposed hybrid nanosystems to provide a high level of stabilization for sensitive and labile antitumor compounds.

Engineered nanoplex mediated targeted miRNA delivery to rescue dying podocytes in diabetic nephropathy

MicroRNAs (miRNA) is vital for gene expression regulation and normal kidney function. Mainly, miRNA-30a is responsible for the homeostasis of podocytes. In the diabetic nephropathic condition, miRNA-30a is directly and primarily suppressed by hyperglycemic kidney induced Notch signaling pathway leads to podocyte damage and apoptosis. Thus, transferring the exogenous miRNA-30a to podocytes might improve albuminuria as well as podocytes injury. The deprived stability, poor targetability, and low specificity in vivo are critical limitations to attain this objective. This investigation reports the specific and efficient delivery of miRNA-30a mimic via cyclo(RGDfC)-gated polymeric-nanoplexes with dendrimer templates to alleviate podocyte conditions. The nanoplexes able to protect RNase enzyme and to exhibit greater cellular uptake viaαvβ3 receptor selective binding in HG treated podocytes. The nanoplexes up-regulated the expression level of miRNA-30a and repress the elevated Notch-1 signaling in HG exposed podocytes. The critical results of in vivo experimentation attribute marked suppression of Notch-1 in streptozotocin (STZ) induced diabetic C57BL/6 mice and reduced glomerular expansion and fibrosis in the glomerular area. Developed nanoplexes represents an efficient platform for the targeted delivery of exogenous miRNA to podocytes. The approach developed herein could be extrapolated to other gene therapeutics and other kidney-related diseases.

Freeze-drying of nanoparticles: How to overcome colloidal instability by formulation and process optimization

Lyophilization of nanoparticle (NP) suspensions is a promising technology to improve stability, especially during long-term storage, and offers new routes of administration in solid state. Although considered as a gentle drying process, freeze-drying is also known to cause several stresses leading to physical instability, e.g. aggregation, fusion, or content leakage. NPs are heterogeneous regarding their physico-chemical properties which renders them different in their sensitivity to lyophilization stress and upon storage. But still basic concepts can be deducted. We summarize basic colloidal stabilization mechanisms of NPs in the liquid and the dried state. Furthermore, we give information about stresses occurring during the freezing and the drying step of lyophilization. Subsequently, we review the most commonly investigated NP types including lipophilic, polymeric, or vesicular NPs regarding their particle properties, stabilization mechanisms in the liquid state, and important freeze-drying process, formulation and storage strategies. Finally, practical advice is provided to facilitate purposeful formulation and process development to achieve NP lyophilizates with high colloidal stability.

Brij-stabilized zein nanoparticles as potential drug carriers

The current study was designed to provide a preliminary physico-chemical characterization of zein nanosystems prepared with various Brij surfactants (for the first time to the best of our knowledge) as a function of various external stimuli such as temperature, pH, serum incubation and the freeze-drying process. The results demonstrate that when Brijs are characterized by unsaturation (C18), considerable stabilization of the colloidal structure is promoted while the length of the polyethylene glycol fraction does not significantly modulate the physico-chemical properties of the nanosystems. Specifically, dynamic light scattering and nanoparticle tracking analysis demonstrated that the use of 0.2 % w/v of Brij O10 promoted the formation of stable zein nanosystems with mean sizes of ∼150 nm and a narrow size distribution, preserving their structures at various pHs and temperatures. The use of mannitol as cryoprotectant resulted in a formulation that can easily be re-suspended in water after the freeze-drying process. This nanoformulation demonstrated that it efficiently retained different amounts of both hydrophilic and lipophilic compounds and showed a prolonged release of the entrapped molecules. In addition, the nanosystems showed a favorable degree of in vitro safety on various cell lines when a concentration <50 μg/mL of protein was used, demonstrating the potential application of Brij O10-stabilized zein nanoparticles as innovative nanocarriers of several active compounds.

Preparation and antitumor evaluation of quercetin nanosuspensions with synergistic efficacy and regulating immunity

To study the effect of quercetin (QUR) on modulating immune effects, enhancing anti-tumor activity, and reducing drug related side effects, three QUR nanosuspensions (QUR-NPs) with different particle sizes were prepared by a microprecipitation-high pressure homogenization method using mPEG-DCA as a stabilizer. Dynamic light scattering was used to analyze the particle sizes of the three QUR-NPs. The results of stability tests showed that the three QUR-NPs had good storage and plasma stability. It was confirmed that plasma protein adsorption occurred for all three QUR-NPs. The results of DSC, DTG, XRPD, and Raman spectroscopy showed that there was no significant change in the crystal form of QUR for any of the three QUR-NPs compared with the commercial QUR. The in vitro dissolution rate of the three QUR-NPs was significantly faster than that of the micronized QUR, with the dissolution rate increasing as particle size decreased. All three QUR-NPs showed stronger in vitro inhibitory activity on MCF-7 cells than the pure QUR solution, with the largest NPs having the strongest inhibitory effect. The pharmacokinetic parameters in rats showed that the MRT and t_1/2 of the QUR-NPs increased as particle size increased. QUR-NPs and the pure QUR solution showed obvious anti-tumor effects against murine hepatic carcinoma H22 model in vivo, although they were not as effective as cyclophosphamide (CTX). However, the anti-tumor effect of the large QUR-NPs combined with CTX was the strongest among all the tested groups. From the results of the thymus and spleen index, it was found that the QUR-NPs could not only regulate the immunity of tumor-bearing mice, but also alleviate the immunosuppression caused by CTX and protect normal tissues, all while enhancing the anti-tumor effect. The immunomodulatory effect of the QUR-NPs on tumor-bearing mice was significantly better than that of the pure QUR solution. Therefore, nanosuspensions can be used as a new drug delivery system for QUR to assist tumor therapy and regulate immunity.

Ternary Polypeptide Nanoparticles with Improved Encapsulation, Sustained Release, and Enhanced In Vitro Efficacy of Carfilzomib

PURPOSE

To develop a new nanoparticle formulation for a proteasome inhibitor Carfilzomib (CFZ) to improve its stability and efficacy for future in vivo applications.

METHODS

CFZ-loaded ternary polypeptide nanoparticles (CFZ/tPNPs) were prepared by using heptakis(6-amino-6-deoxy)-β-cyclodextrin(hepta-hydrochloride) (HaβCD) and azido-poly(ethylene glycol)-block-poly(L-glutamic acid sodium salt) (N₃-PEG-PLE). The process involved ternary (hydrophobic/ionic/supramolecular) interactions in three steps: 1) CFZ was entrapped in the cavity of HaβCD by hydrophobic interaction, 2) the drug-cyclodextrin inclusion complexes were mixed with N₃-PEG-PLE to form polyion complex nanoparticles, and 3) the nanoparticles were modified with fluorescent dyes (AFDye 647) for imaging and/or epithelial cell adhesion molecule (EpCAM) antibodies for cancer cell targeting. CFZ/tPNPs were characterized for particle size, surface charge, drug release, stability, intracellular uptake, proteasome inhibition, and in vitro cytotoxicity.

RESULTS

tPNPs maintained an average particle size of 50 nm after CFZ entrapment, EpCAM conjugation, and freeze drying. tPNPs achieved high aqueous solubility of CFZ (>1 mg/mL), sustained drug release (t_1/2 = 6.46 h), and EpCAM-mediated cell targeting, which resulted in increased intracellular drug accumulation, prolonged proteasome inhibition, and enhanced cytotoxicity of CFZ in drug-resistant DLD-1 colorectal cancer cells.

CONCLUSIONS

tPNPs improved stability and efficacy of CFZ in vitro, and these results potentiate effective cancer treatment using CFZ/tPNPs in future vivo studies.

Freeze-Drying of Pharmaceutical and Nutraceutical Nanoparticles: The Effects of Formulation and Technique Parameters on Nanoparticles Characteristics

Nanoparticles (NPs) are of the most interesting novel vehicles for effective drug delivery to humans. Freeze drying is known as an engaging process to improve the long lasting stability of NPs formulations. This study aims to elucidate the importance of various parameters involving in freeze-drying of the most common pharmaceutical/nutraceutical NPs including nanosuspensions, nanocrystals (NCs), cocrystals/nanococrystals, nanoemulsions (NEs), nanocapsules (NCPs) and nanospheres (NSPs). Regarding this, the therapeutic goals of NPs and specifications of drug must be considered. According to our survey, the most influential factors for achieving optimum results include type and concentration of cryoprotectant/lyoprotectant, stabilizer structure and concentration, the NPs concentration in solution, freezing, annealing, and drying rate, the interaction between protectants and stabilizer, solvent type and antisolvent to solvent ratio. The study shows that for each class of NPs, specific variables are of highest significance and should be optimized. For instance, about NCs, freezing rate and antisolvent/solvent ratio should be particularly considered and for emulsified NPs, the best results have been obtained by 5-20% of saccharides as cryoprotectants. These findings suggest that to obtain a product with the lowest aggregation and particle size (PS), optimization of the effective factors in formulation and lyophilization process are essential.

Cyclo-RGD Truncated Polymeric Nanoconstruct with Dendrimeric Templates for Targeted HDAC4 Gene Silencing in a Diabetic Nephropathy Mouse Model

Diabetic nephropathy (DN), a chronic progressive kidney disease, is a significant complication of diabetes mellitus. Dysregulation of the histone deacetylases (HDACs) gene has been implicated in the pathogenesis of DN. Hence, the HDAC-inhibitors have emerged as a critical class of therapeutic agents in DN; however, the currently available HDAC4-inhibitors are mostly nonselective in nature as well as inhibit multiple HDACs. RNA interference of HDAC4 (HDAC4 siRNA) has shown immense promise, but the clinical translation has been impeded due to lack of a targeted, specific, and in vivo applicable delivery modality. In the present investigation, we examined Cyclo(RGDfC) (cRGD) truncated polymeric nanoplex with dendrimeric templates for targeted HDAC4 Gene Silencing. The developed nanoplex exhibited enhanced encapsulation of siRNA and offered superior protection against serum RNase nucleases degradation. The nanoplex was tested on podocytes (in vitro), wherein it showed selective binding to the αvβ3 integrin receptor, active cellular uptake, and significant in vitro gene silencing. The in vivo experiments showed remarkable suppression of the HDAC4 and inhibition in the progression of renal fibrosis in the Streptozotocin (STZ) induced DN C57BL/6 mice model. Histopathological and toxicological studies revealed nonsignificant abnormality/toxicity with the nanoplex. Conclusively, nanoplex was found as a promising tactic for targeted therapy of podocytes and could be extended for other kidney-related ailments.

Stability issues and approaches to stabilised nanoparticles based drug delivery system

Nanoparticles form the fundamental building blocks for many exciting applications in various scientific disciplines due to its unique features such as large surface to mass ratio, targeting potential, ability to adsorbed and carry other compound which makes them suitable for biomedical applications. However, the problem of the large-scale synthesis of nanoparticles remains challenging due to physical instability associated with nanoparticles which lead to generation of aggregates particles with high polydispersity index (PDI) indicating low particle homogeneity and eventually loss of their special nanoscale properties. The stabilisation concept can be generated by repulsive electrostatic force, which nanoparticles experience, when they are surrounded by a double layer of electric charges. Selection of proper stabiliser will govern the stability of NPs and ultimately development of optimised drug delivery system. This review summarises mechanism of physical instability issues likely to be encountered during the development of nanoformulations. It also discusses potential stabilising agents used so far and their mechanism in achieving stable nanosystems.

Surface stabilized atorvastatin nanocrystals with improved bioavailability, safety and antihyperlipidemic potential

Atorvastatin, a favored option for hyperlipidemia exhibits the problem of poor gastric solubility and low absolute bioavailability (12%) along with higher pre-systemic clearance (>80%). Therefore, to circumvent these limitations, atorvastatin nanocrystals were prepared using poloxamer-188 as stabilizer via high pressure homogenization technique followed by lyophilization. Various variables like drug to poloxamer-188 ratio, homogenization cycle, homogenization pressure, type and concentration of cryoprotectant were optimized to achieve uniform nanosized crystals with good dispersibility. Solid state characterization by ATR-FTIR and DSC revealed no incompatible physicochemical interaction between drug and excipients in formulation while DSC and PXRD collectively corroborated the reduced crystallinity of drug in nanocrystals. Size analysis and SEM confirmed nanometric size range of nanocrystals (225.43 ± 24.36 nm). Substantial improvement in gastric solubility (~40 folds) and dissolution rate of drug in nanocrystals was observed. Pharmacokinetic study in wistar rats revealed significant improvement in oral bioavailability (~2.66 folds) with atorvastatin nanocrystals compared to pure drug. Furthermore, reduction in serum total lipid cholesterol, LDL and triglyceride content justified the effectiveness of formulation at 50% less dose of atorvastatin along with improved plasma safety profile in comparison of pure drug. In conclusion, atorvastatin nanocrystals are safe and efficacious drug delivery system confirming potent competence in treatment of hyperlipidemic conditions with ease of scalability for commercialization.

Method and its Composition for encapsulation, stabilization, and delivery of siRNA in Anionic polymeric nanoplex: An In vitro- In vivo Assessment

Small interfering RNA (siRNA) are synthetic RNA duplex designed to specifically knockdown the abnormal gene to treat a disease at cellular and molecular levels. In spite of their high potency, specificity, and therapeutic potential, the full-fledged utility of siRNA is predominantly limited to in vitro set-up. Till date, Onpattro is the only USFDA approved siRNA therapeutics available in the clinic. The lack of a reliable in vivo siRNA delivery carrier remains a foremost obstacle towards the clinical translation of siRNA therapeutics. To address the obstacles associated with siRNA delivery, we tested a dendrimer-templated polymeric approach involving a USFDA approved carrier (albumin) for in vitro as well as in vivo delivery of siRNA. The developed approach is simple in application, enhances the serum stability, avoids in vivo RNase-degradation and mediates cytosolic delivery of siRNA following the endosomal escape process. The successful in vitro and in vivo delivery of siRNA, as well as targeted gene knockdown potential, was demonstrated by HDAC4 inhibition in vitro diabetic nephropathy (DN) podocyte model as well as in vivo DN C57BL/6 mice model. The developed approach has been tested using HDAC4 siRNA as a model therapeutics, while the application can also be extended to other gene therapeutics including micro RNA (miRNA), plasmids oligonucleotides, etc.

In vitro and in vivo evaluation of poly (acrylic acid) modified mesoporous silica nanoparticles as pH response carrier for β-elemene self-micro emulsifying

The strategy of formulating poorly soluble actives as liquid self-micro emulsifying drug delivery system (SMEDDS) has been explored in more than a thousand research papers. However, there have been a limited number of reports on pH sensitive solid SMEDDS. This study explored the feasibility of using poly (acrylic acid) modified mesoporous silica nanoparticles (MSNs-PAA) as a pH-mediated solid SMEDDS carrier for β-elemene. This SMEDDS was optimized using a central composite design-response surface methodology, pseudo ternary phase diagrams, and studies of the preliminary stability. MSNs-PAA was synthesized and used for loading β-elemene SMEDDS. Ele/MSNs-PAA was capable of pH-sensitive release of β-elemene. In addition to structural analyses, the morphological and stability of this SMEDDS was also investigated. In comparison of the β-elemene solution and the SMEDDS, the Ele/MSNs-PAA demonstrated improved C_max, AUC and MRT after oral administration. These results suggested that the MSNs-PAA could be further developed as a promising approach for the pH sensitive release of β-elemene SMEDDS with enhanced oral bioavailability.

Optimisation of the preservation conditions for molecularly imprinted polymer nanoparticles specific for trypsin

The influence of lyophilisation, autoclaving and sonication on the stability and performance of trypsin-specific molecularly imprinted polymer nanoparticles (MIP NPs) has been studied in order to improve their long-term physical stability. Glucose, glycine, sorbitol and trehalose were tested as cryoprotectant agents during the lyophilisation treatment. The effect of lyophilisation and sterilisation on affinity of trypsin-specific NPs was assessed using Biacore 3000 instrument. The results have demonstrated that MIP NPs successfully withstood the lyophilisation and autoclaving conditions without a reduction of their recognition properties and affinity. It is possible to conclude that both tested lyophilisation and sterilisation treatments were suitable for a long-term storage of the prepared MIP NPs and could be used to store MIP NPs in dry state and hence reduce the chance of the bacterial contamination. An effective preservation of the MIP NPs is a crucial requirement for their future applications in the clinical diagnostics and bioimaging.

Development and Characterization of Liposomal Formulations Containing Phytosterols Extracted from Canola Oil Deodorizer Distillate along with Tocopherols as Food Additives

Phytosterols are plant sterols recommended as adjuvant therapy for hypercholesterolemia and tocopherols are well-established anti-oxidants. However, thermo-sensitivity, lipophilicity and formulation-dependent efficacy bring challenges in the development of functional foods, enriched with phytosterols and tocopherols. To address this, we developed liposomes containing brassicasterol, campesterol and β-sitosterol obtained from canola oil deodorizer distillate, along with alpha, gamma and delta tocopherol. Three approaches; thin film hydration-homogenization, thin film hydration-ultrasonication and Mozafari method were used for formulation. Validated liquid chromatographic tandem mass spectrometry (LC-MS/MS) was utilized to determine the entrapment efficiency of bioactives. Stability studies of liposomal formulations were conducted before and after pasteurization using high temperature short time (HTST) technique for a month. Vesicle size after homogenization and ultrasonication (<200 nm) was significantly lower than by Mozafari method (>200 nm). However, zeta potential (-9 to -14 mV) was comparable which was adequate for colloidal stability. Entrapment efficiencies were greater than 89% for all the phytosterols and tocopherols formulated by all three methods. Liposomes with optimum particle size and zeta potential were incorporated in model orange juice, showing adequate stability after pasteurization (72 °C for 15 s) for a month. Liposomes containing phytosterols obtained from canola waste along with tocopherols were developed and successfully applied as a food additive using model orange juice.

Smart nanocarrier based on PEGylated hyaluronic acid for deacetyl mycoepoxydience: High stability with enhanced bioavailability and efficiency

Deacetyl mycoepoxydience (DM) nanocrystals core were stabilized by the folate modified distearoylphosphatidyl ethanolamine-polyethylene glycol (DSPE-PEG₂₀₀₀-FA) as the active-targeting stabilizer and D-α-tocopherol polyethylene glycol 1000 succinate (TPGS) as the reversion of multidrug resistance stabilizer, respectively. The DM nanocrystals was acted as the core and shelled by the polyethylene glycol-hyaluronic acid (PEG-HA). The optimal core-shell system demonstrated superior stability at 4 °C for 6 weeks by the stability study and higher dissolution velocity. Cytotoxicity in vitro and cell proliferation inhibition was evaluated by MCF-7 cells line. Furthermore, the core-shell nanocrystals revealed a concentration- and time-dependent cytotoxicity activity and enhanced the cell proliferation inhibition. Pharmacokinetic studies in rabbits showed core-shelled DM nanocrystals significantly increased AUC and t_1/2 and reduced CL_z compared to the DM solution for intravenous delivery. Results indicated that core-shell nanocrystals nanogel was successfully established with higher stability and the bioavailability of DM with higher safety was improved.