Evaluation of the Difference between Predicted and Measured Central Corneal Thickness Reduction after SMILE and Femtosecond Laser-assisted LASIK for Myopia

Study of corneal and retinal thicknesses at five years after FS-LASIK and SMILE for myopia

BACKGROUND

This study aimed to observe corneal and retinal thicknesses at 5 years after femtosecond laser-assisted in situ keratomileusis (FS-LASIK) and small incision lenticule extraction (SMILE) for myopia, investigate the effect of epithelial remodeling on refractive status and visual quality, and compare retinal thicknesses among fundus tessellation grades.

METHODS

Patients who received FS-LASIK or SMILE 5 years before were enrolled in this cross-sectional study. After 1:1 propensity score matching, each surgical group obtained 177 patients (177 eyes). Examinations including visual acuity, refraction, corneal and retinal thicknesses, corneal higher-order aberrations (HOAs), and fundus photography were performed in this visit at 5 years after surgery. The Quality of Vision (QoV) questionnaire was used to assess visual symptoms and overall satisfaction. Corneal and retinal thicknesses between groups were compared, contributing factors were analyzed, and correlations with postoperative refractive status, HOAs, QoV scores and overall satisfaction were evaluated.

RESULTS

The discrepancy of epithelial thickness between central and pericentral zones in FS-LASIK group was larger than that in SMILE group, which was negatively correlated with postoperative spherical equivalent (SE), positively correlated with spherical aberration (all P < 0.05), but not correlated with QoV scores and overall satisfaction (all P > 0.05) in both surgical groups. There was no statistical difference in stromal thickness and total corneal thickness (all P > 0.05). Most annuluses of epithelial and stromal thicknesse were linearly related to preoperative SE (all P < 0.05). The macular thickness, ganglion cell complex thickness, and retinal nerve fiber layer thickness exhibited comparable values between two surgical groups and four fundus tessellation grades, with no significant association observed with postoperative SE (all P > 0.05).

CONCLUSION

The tendency that epithelial thickness in central zone was thicker than peripheral zone was more obvious at 5 years after FS-LASIK compared to SMILE. This uneven distribution of epithelial thickness might play a role in myopic regression and the changes in HOAs, especially in patients with high myopia, but it had little effect on patients' subjective visual quality and satisfaction. Retinal thicknesses were not affected by these two surgical methods, and they did not appear to be the clinical indicators for myopic regression or fundus tessellation progression.

Three-year results of central corneal stromal thickness reduction in small-incision lenticule extraction for high myopia correction

BACKGROUND

To investigate the long-term corneal stromal remodeling and central stromal thickness (CST) reduction accuracy after small-incision lenticule extraction (SMILE) for high myopia correction.

METHODS

This prospective study included 30 patients (50 eyes) who had undergone SMILE. Measurements of CST reduction using optical coherence tomography were performed at 1 month, 6 months, 1 year, and 3 years after surgery. Correlations were performed between planned and achieved CST reductions.

RESULTS

The study enrolled 50 eyes of 30 patients. The mean spherical equivalent was -9.25±1.52 D(diopters). The postoperative CST increased in the first month after surgery and remained stable for a year. Thereafter, it remained stable during follow-up from 1 to 3 years postoperatively. The predicted CST reduction was 146.4 ± 10.3 μm. The achieved CST reductions at 1 month, 6 months, 1 year, and 3 years after surgery were 135.3 ± 12.1 μm, 130.8 ± 10.6 μm, 125.9 ± 9.4 μm, and 122.2 ± 10.6 μm, respectively. An overestimation of CST reduction was observed three years after surgery. Correlation analysis revealed a strong correlation between planned and achieved CST reductions; however, no correlation was found between CST reductions predicted error and the planned CST reductions.

CONCLUSION

During long-term follow-up, our findings revealed a significant stromal remodeling following SMILE in patients with high myopia. Therefore, clinicians should consider it when screening patients with high myopia for SMILE.

Comparison of Corneal Biomechanics Treated With Femtosecond Laser-Assisted In Situ Keratomileusis and Small-Incision Lenticule Extraction by New Corneal Biomechanical Parameters of Corvis ST II

PURPOSE

The aim of this study was to compare corneal biomechanics treated with femtosecond laser-assisted in situ keratomileusis (FS-LASIK) and small-incision lenticule extraction (SMILE) for myopia and astigmatism using the new corneal biomechanical parameters of Corvis ST II.

METHODS

This was a prospective nonrandomized controlled study. Patients treated with FS-LASIK or SMILE between January 2018 and July 2018 were included. Corvis ST II was performed to measure corneal biomechanical parameters, including deformation amplitude ratio 2.0 mm (DA ratio 2.0 mm), integrated inverse radius (Integr Radius), stiffness parameter at first applanation (SP-A1), and Ambrosio relational thickness through the horizontal meridian (ARTh), preoperatively, 1 month postoperatively, and 6 months postoperatively. Pentacam pachymetry was used to assess the reduction in pachymetry.

RESULTS

Forty-five eyes underwent FS-LASIK, and 45 eyes underwent SMILE. The new parameters obtained by Corvis ST II between preoperative and postoperative measurements showed significant changes after FS-LASIK or SMILE (all P < 0.001). Postoperative SP-A1 significantly decreased in the 2 groups (108.88 ± 14.47-73.32 ± 13.2 in FS-LASIK and 105.79 ± 17.68-73.91 ± 14.81 in SMILE). Eyes with equal preoperative pachymetry, intraocular pressure, and spherical equivalents showed no significant differences in these new parameters measured using Corvis ST II ( all P > 0.05) between the 2 groups. The prediction of the laser platform overestimated the measured pachymetry reduction in the SMILE group (111.93 ± 15.18 μm vs. 87.16 ± 15.47 μm).

CONCLUSIONS

New corneal biomechanical parameters measured using Corvis ST II showed no significant differences between FS-LASIK and SMILE in eyes with homogeneous preoperative parameters. The laser software platform may have overestimated the actual corneal reduction in the eyes treated with SMILE.

Predictability of the Achieved Lenticule Thickness in Keratorefractive Lenticule Extraction for Myopia Correction

PURPOSE

To assess the predictability between the SCHWIND ATOS femtosecond laser (SCHWIND eye-tech-solutions) read-out and achieved lenticule thickness measured using MS-39 anterior segment optical coherence tomography (ASOCT; CSO) at the corneal vertex at postoperative 1 day and 1 and 3 months of follow-up.

METHODS

This retrospective case series included 130 eyes of 65 consecutive patients who were treated with SmartSight (SCHWIND eye-tech-solutions) lenticule extraction. Sixty-four percent of patients were women with a mean spherical refraction of -4.98 ± 1.19 diopters (D) and mean astigmatism of 0.53 ± 0.64 D. The measurements were performed using AS-OCT with the Phoenix Software v 4.1.1.5. Lenticule thickness was obtained by the subtraction method between preoperative and postoperative total corneal thickness.

RESULTS

A lower reduction in central corneal thickness (CCT) compared to the laser read-out for all three follow-up visits can be observed. Essentially, the reduction in CCT was identical at 3 months versus 1 month. The reduction in CCT was lowest at postoperative 1 day. Examining the 1- and 3-month data (essentially equivalent), one can see a best fit of y = 0.94 x -7 µm.

CONCLUSIONS

The reduction in CCT was stable from 1 month of follow-up. The stable reduction in CCT was -6% (-1.5% after accounting for design decisions) and -7 µm lower than the respective laser read-out. The findings are predictable, showing a certain level of the lenticules becoming slightly thinner than their respective laser read-outs. [J Refract Surg. 2023;39(11):728-735.].

Comparison of central corneal thickness treated with small incision lenticule extraction, femtosecond laser-assisted in situ keratomileusis, or laser-assisted subepithelial keratomileusis for myopia

To compare the central corneal thickness (CCT) treated with small incision lenticule extraction (SMILE), femtosecond laser-assisted in situ keratomileusis (FS-LASIK), or laser-assisted subepithelial keratomileusis (LASEK) for myopia correction. This was a retrospective case series study. Patients who had completed 1-year follow-up after receiving SMILE, FS-LASIK, or LASEK at our hospital from January 2019 to July 2021 were included. Pentacam pachymetry was performed to measure the CCT. The predicted CCT reduction was obtained through laser platform. The measured CCT reduction was defined as the difference between the preoperative and postoperative CCT using Pentacam pachymetry. There were 100 eyes treated by SMILE, 100 eyes by FS-LASIK, and 100 eyes by LASEK. There was a significant difference in predicted CCT reduction among the three surgeries (P < 0.001), but no significant difference in measured CCT reduction postoperatively (PGroup = 0.373). At 1 year postoperatively, the CCT reduction was overestimated by 17.85 ± 5.36 µm in the SMILE group, underestimated by 4.31 ± 7.08 µm in the FS-LASIK group, and underestimated by 7.60 ± 8.28 µm in the LASEK group (PGroup < 0.001, PTime < 0.001). In the FS-LASIK group, the difference between predicted and measured CCT reduction was not related to the predicted CCT reduction (P = 0.095). The laser platform may overestimate the CCT reduction for SMILE and underestimate it for FS-LASIK and LASEK. FS-LASIK has a much higher level of accuracy in CCT reduction, which is not influenced by refractive correction.

Comparison of planned versus achieved central corneal stromal thickness reduction in SMILE versus FS-LASIK: a retrospective study

Accuracy of planned corneal stromal thickness (CST) reduction is essential to the safety of laser vision correction. This study was to compare the accuracy of the planned central CST reduction in small incision lenticule extraction (SMILE) and femtosecond laser-assisted in situ keratomileusis (FS-LASIK). A total of 77 patients (43 for SMILE, 34 for FS-LASIK using Custom-Q algorithm) were included in this retrospective study. At postoperative 6-18 months, the central CST reduction was overestimated by 18.49 ± 6.42 μm in the SMILE group (P < 0.001) and underestimated by 2.56 ± 7.79 μm in the FS-LASIK group (P = 0.064). The planned-achieved difference (PAD) of central CST reduction was positively correlated with preoperative manifest refraction spherical equivalent (MRSE) and with planned central CST reduction in both groups. When calculated by manifest refraction (MR) without nomogram adjustment, the central CST reduction was overestimated by 11.14 ± 6.53 μm in the SMILE group and underestimated by 2.83 ± 7.39 μm in the FS-LASIK group. The PAD of central CST reduction without nomogram was significantly narrowed in SMILE and maintained in FS-LASIK, suggesting estimation using MR without nomogram adjustment may be feasible for SMILE and FS-LASIK in clinical practice.

New simulation software to predict postoperative corneal stiffness before laser vision correction

PURPOSE

To develop a new virtual surgery simulation platform to predict postoperative corneal stiffness (Kc mean ) after laser vision correction (LVC) surgery.

SETTING

Narayana Nethralaya Eye Hospital and Sankara Nethralaya, India; Humanitas Clinical and Research Center, Italy.

DESIGN

Retrospective observational case series.

METHODS

529 eyes from 529 patients from 3 eye centers and 10 post-small-incision lenticule extraction (SMILE) ectasia eyes were included. The software (called AcuSimX) derived the anisotropic, fibril, and extracellular matrix biomechanical properties (using finite element calculation) of the cornea using the preoperative Corvis-ST, Pentacam measurement, and inverse finite element method assuming published healthy collagen fibril orientations. Then, the software-computed postoperative Kc mean was adjusted with an artificial intelligence (AI) model (Orange AI) for measurement uncertainties. A decision tree was developed to classify ectasia from normal eyes using the software-computed and preoperative parameters.

RESULTS

In the training cohort (n = 371 eyes from 371 patients), the mean absolute error and intraclass correlation coefficient were 6.24 N/m and 0.84 (95% CI, 0.80-0.87), respectively. Similarly, in the test cohort (n = 158 eyes from 158 patients), these were 6.47 N/m and 0.84 (0.78-0.89), respectively. In the 10 ectasia eyes, the measured in vivo (74.01 [70.01-78.01]) and software-computed (74.1 [69.03-79.17]) Kc mean were not statistically different ( P = .96). Although no statistically significant differences in these values were observed between the stable and ectasia groups ( P ≥ .14), the decision tree classification had an area under the receiver operating characteristic curve of 1.0.

CONCLUSIONS

The new software provided an easy-to-use virtual surgery simulation platform for post-LVC corneal stiffness prediction by clinicians and was assessed in post-SMILE ectasia eyes. Further assessments with ectasia after surgeries are required.

Comparison of Changes in Corneal Thickness and Curvature After Myopia Correction Between SMILE and FS-LASIK

PURPOSE

To comparatively investigate the changes in corneal thickness and curvature between small incision lenticule extraction (SMILE) and femtosecond laser-assisted laser in situ keratomileusis (FS-LASIK).

METHODS

Data were collected preoperatively and postoperatively at 1 week, 1 month, and 3 months, including central corneal thickness (CCT), midperipheral corneal thickness (MPCT), peripheral corneal thickness (PCT), central keratometry (CK), midperipheral keratometry (MPK), and peripheral keratometry (PK), using a dual rotating Scheimpflug analyzer.

RESULTS

At 1 week postoperatively, changes in CCT, MPCT, PCT, and PK were significantly greater in the SMILE group than in the FS-LASIK group (P = .003 for CCT and < .001 for MPCT, PCT, and PK), but no significant inter-group differences were found between changes in CK and MPK (P = .883 and .513, respectively). CCT, MPCT, and PK values showed a similar increase in both groups, but significantly more increase in PCT and significantly less increase in CK and MPK was observed in the SMILE group from 1 week to 3 months after surgery. At 3 months postoperatively, CCT and MPCT were significantly thinner in the SMILE group than in the FSLASIK group (P = .018 and .022, respectively), and there was no significant difference in PCT, CK, MPK, and PK between the two groups.

CONCLUSIONS

SMILE caused significantly more corneal thinning at the center, midperiphery, and periphery, and more corneal flattening at the periphery, compared to FS-LASIK. A different pattern of corneal remodeling was observed between the two surgeries during the 3-month follow-up period. [J Refract Surg. 2023;39(1):15-22.].

Corneal Lenticule Creation Using a New Solid-State Femtosecond Laser Measured by Spectral Domain OCT in a Porcine Eye Model

Purpose

To determine the accuracy and precision of corneal lenticule creation with a new solid-state femtosecond laser in a porcine eye model.

Methods

Corneal lenticule creation was performed using a new solid-state femtosecond laser on 60 porcine eyes with 10 subgroups. Optical coherence tomography images were acquired immediately after laser treatment. Cap thickness (CT), cap diameter (CD), and lenticule thickness (LT) were measured manually by three independent readers. Additionally, CT and LT were measured by an automated algorithm (aLT, aCT).

Results

Measured LT was significantly greater than the intended LT (average difference 14.3 ± 5.6 µm, P < 0.001). aLT was closer but still significantly different from the intended LT (-2.9 ± 5.8 µm, P < 0.001). Measured CT showed no significant difference from the intended CT (2.6 ± 13.3, P = 0.145). aCT was significantly smaller compared to the intended CT (-9.6 ± 13.6, P < 0.001). Measured CD was significantly smaller compared to the intended CD (-0.21 ± 0.20 mm, P < 0.001). All lenticules were cut as planned with no laser-related complications.

Conclusions

This new solid-state femtosecond laser used in our trial provides corneal lenticule creation in a porcine eye model comparable to other established systems. However, measuring those lenticules in the provided setting seems too challenging even when using semiautomated algorithms, which seems to be due to the experimental setting of the trial.

Translational Relevance

This trial shows the precision and repeatability of corneal cuts performed by a new femtosecond laser that could translate to refractive corneal lenticule surgery.