Assembly of Amelogenin Proteolytic Products and Control of Octacalcium Phosphate Crystal Morphology

Morphological study of remineralization of the eroded enamel lesions by tyrosine-rich amelogenin peptide

BACKGROUND

Tyrosine-rich amelogenin peptide (TRAP) is the main amelogenin digestion product in the developmental enamel matrix. It has been shown to promote remineralization of demineralized enamel in our previous study. However, direct evidence of the effect of TRAP on the morphology and nanostructure of crystal growth on an enamel surface has not been reported. This study aimed to examine the effect of TRAP on the morphology of calcium phosphate crystals grown on early enamel erosion using a pH-cycling model.

METHODS

Eroded lesions were produced in human premolars by 30-second immersion in 37% phosphoric acid. Forty-five samples of eroded human premolar enamel blocks were selected and randomly divided into 3 groups: deionized water (DDW, negative control); 100 µg/mL TRAP, and 2 ppm sodium fluoride (NaF, positive control group). For 14 days, the specimens were exposed to a pH-cycling model. Using scanning electron microscopy (SEM) and atomic force microscopy (AFM) methods, the surface morphology, calcium-phosphorus ratio, and enamel surface roughness were examined. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) were used to assess crystal characteristics.

RESULTS

After pH-cycling, compared to the two control groups, the surface of the eroded enamel of the peptide TRAP group shows a large number of new, densely arranged rod-like crystals, parallel to each other, regularly arranged, forming an ordered structure, with crystal morphology similar to that of natural enamel. The crystals are mostly hydroxyapatite (HA).

CONCLUSION

This study demonstrates that the peptide TRAP modulates the formation of hydroxyapatite in eroded enamel and that the newly formed crystals resemble natural enamel crystals and promote the remineralization of enamel, providing a promising biomaterial for remineralization treatment of enamel lesions.

The material design of octacalcium phosphate bone substitute: increased dissolution and osteogenecity

Octacalcium phosphate (OCP) has been advocated as a precursor of bone apatite crystals. Recent studies have shown that synthetic OCP exhibits highly osteoconductive properties as a bone substitute material that stems from its ability to activate bone tissue-related cells, such as osteoblasts, osteocytes, and osteoclasts. Accumulated experimental evidence supports the proposition that the OCP-apatite phase conversion under physiological conditions increases the stimulatory capacity of OCP. The conversion of OCP progresses by hydrolysis toward Ca-deficient hydroxyapatite with Ca²⁺ ion incorporation and inorganic phosphate ion release with concomitant increases in the solid Ca/P molar ratio, specific surface area, and serum protein adsorption affinity. The ionic dissolution rate during the hydrolysis reaction was controlled by introducing a high-density edge dislocation within the OCP lattice by preparing it through co-precipitation with gelatin. The enhanced dissolution intensifies the material biodegradation rate and degree of osteogenecity of OCP. Controlling the biodegradation rate relative to the dissolution acceleration may be vital for controlling the osteogenecity of OCP materials. This study investigates the effects of the ionic dissolution of OCP, focusing on the structural defects in OCP, as the enhanced metastability of the OCP phase modulates biodegradability followed by new bone formation. STATEMENT OF SIGNIFICANCE: Octacalcium phosphate (OCP) is recognized as a highly osteoconductive material that is biodegradable by osteoclastic resorption, followed by new bone formation by osteoblasts. However, if the degradation rate of OCP is increased by maintaining the original osteoconductivity or acquiring a bioactivity better than its current properties, then early replacement with new bone can be expected. Although cell introduction or growth factor addition by scaffold materials is the standard method for tissue engineering, material activity can be augmented by introducing dislocations into the lattice of the OCP. This review article summarizes the effects of introducing structural defects on activating OCP, which was obtained by co-precipitation with gelatin, as a bone substitute material and the mechanism of improved bone replacement performance.

Angio-osteogenic capacity of octacalcium phosphate co-precipitated with copper gluconate in rat calvaria critical-sized defect

The objective of this study is to investigate the effects of octacalcium phosphate (OCP)-induced bone regeneration on angiogenesis regulated by the inclusion of copper ions in OCP in vitro and in vivo. Calcium (Ca)-deficient Cu-OCPs, containing 0.01 wt% Cu (low-Cu-OCP) and 0.12 wt% Cu (high-Cu-OCP), were synthesized with co7pper gluconate salt. The lattice parameters of Cu-OCPs tended to decrease slightly with Cu inclusion, as estimated by Rietveld analysis. Cu ions were released in OCP when the materials were incubated in the medium for human umbilical vein endothelial cells (HUVECs). The solubility of Cu-OCPs, estimated by the degree of supersaturation, was slightly higher than that of the original OCP. Cu-OCP tended to hydrolyze to an apatite structure while maintaining the crystal plate-like morphology when incubated with mesenchymal stem D1 cells in osteogenic media for 14 days. The specimens were characterized by selected area electron diffraction, transmission electron microscopy, and Fourier transform infrared spectroscopy. Low-Cu-OCP significantly enhanced the HUVEC capillary cross-linking density. D1 cell differentiation was inhibited with the inclusion of Cu, even at low concentrations. The composite of low-Cu-OCP with a gelatin sponge (low-Cu-OCP/Gel) significantly enhanced angiogenesis coupled with bone regeneration when implanted in a rat calvarial critical-sized defect for 4 weeks, compared with the corresponding amount of Cu-containing Gel (Cu/Gel) or OCP/Gel materials through angiography and tissue histomorphometry. These results support the proposition that angiogenesis stimulated by low-Cu-OCP is closely related with enhanced bone regeneration.

Pseudogenized Amelogenin Reveals Early Tooth Loss in True Toads (Anura: Bufonidae)

Extant anurans (frogs and toads) exhibit reduced dentition, ranging from a lack of mandibular teeth to complete edentulation, as observed in the true toads of the family Bufonidae. The evolutionary time line of these reductions remains vague due to a poor fossil record. Previous studies have demonstrated an association between the lack of teeth in edentulous vertebrates and the pseudogenization of the major tooth enamel gene amelogenin (AMEL) through accumulation of deleterious mutations and the disruption of its coding sequence. In this study, we have harnessed the pseudogenization of AMEL as a molecular dating tool to correlate loss of dentition with genomic mutation patterns during the rise of the family Bufonidae. Specifically, we have utilized AMEL pseudogenes in three members of the family as a tool to estimate the putative date of edentulation in true toads. Comparison of AMEL sequences from Rhinella marina, Bufo gargarizans and Bufo bufo, with nine extant, dentulous frogs, revealed mutations confirming AMEL inactivation in Bufonidae. AMEL pseudogenes in modern bufonids also exhibited remarkably high 86-93% sequence identity among each other, with only a slight increase in substitution rate and relaxation of selective pressure, in comparison with functional copies in other anurans. Moreover, using selection intensity estimates and synonymous substitution rates, analysis of functional and pseudogenized AMEL resulted in an estimated inactivation window of 46-60 million years ago in the lineage leading to modern true toads, a time line that coincides with the rise of the family Bufonidae.

Biomimetic chitosan against bioinspired nanohydroxyapatite for repairing enamel surfaces

In this study, chitosan was employed as a novel biomimetic mineralization model to repair damaged enamel to compare its performance with that of bioinspired zinc-doped nanohydroxyapatite. Fifty human premolar tooth slices were prepared, and artificial caries lesions were induced to produce demineralized enamel surfaces. The etched slices were randomly divided into two groups: a chitosan-hydrogel-treated group and a zinc-doped nanohydroxyapatite-treated group. In vitro assessment using energy-dispersive X-ray analysis, X-ray diffraction analysis and scanning electron microscopy was conducted at the baseline, demineralization and remineralization stages. Baseline results were matched with those for normal enamel; a marked reduction in the calcium (Ca)/phosphorus (P) ratio to 1·12 and the lack of the characteristic hydroxyapatite diffraction peaks were detected for demineralized enamel. The remineralization stage revealed evident recovery of the mineral contents (the calcium/phosphorus ratio was 1·61 for the chitosan-treated group and 1·58 for the bioinspired-nanohydroxyapatite-treated one), with apparent distinctive X-ray diffraction patterns of hydroxyapatite in both groups. Scanning electron microscopic analysis showed the absence of etched enamel porosity, with the formation of a newly formed rod-like apatite layer, similar to natural enamel, which extended over the treated enamel surfaces of both groups. Chitosan hydrogel is recommended as a biomimetic mineralization smart system for repairing demineralized carious enamel.

Reptile enamel matrix proteins: Selection, divergence, and functional constraint

The three major enamel matrix proteins (EMPs): amelogenin (AMEL), ameloblastin (AMBN), and enamelin (ENAM), are intrinsically linked to tooth development in tetrapods. However, reptiles and mammals exhibit significant differences in dental patterning and development, potentially affecting how EMPs evolve in each group. In most reptiles, teeth are replaced continuously throughout life, while mammals have reduced replacement to only one or two generations. Reptiles also form structurally simple, aprismatic enamel while mammalian enamel is composed of highly organized hydroxyapatite prisms. These differences, combined with reported low sequence homology in reptiles, led us to predict that reptiles may experience lower selection pressure on their EMPs as compared with mammals. However, we found that like mammals, reptile EMPs are under moderate purifying selection, with some differences evident between AMEL, AMBN, and ENAM. We also demonstrate that sequence homology in reptile EMPs is closely associated with divergence times, with more recently diverged lineages exhibiting high homology, along with strong phylogenetic signal. Lastly, despite sequence divergence, none of the reptile species in our study exhibited mutations consistent with diseases that cause degeneration of enamel (e.g. amelogenesis imperfecta). Despite short tooth retention time and simplicity in enamel structure, reptile EMPs still exhibit purifying selection required to form durable enamel.

Enamel biomimetics-fiction or future of dentistry

Tooth enamel is a complex mineralized tissue consisting of long and parallel apatite crystals configured into decussating enamel rods. In recent years, multiple approaches have been introduced to generate or regenerate this highly attractive biomaterial characterized by great mechanical strength paired with relative resilience and tissue compatibility. In the present review, we discuss five pathways toward enamel tissue engineering, (i) enamel synthesis using physico-chemical means, (ii) protein matrix-guided enamel crystal growth, (iii) enamel surface remineralization, (iv) cell-based enamel engineering, and (v) biological enamel regeneration based on de novo induction of tooth morphogenesis. So far, physical synthesis approaches using extreme environmental conditions such as pH, heat and pressure have resulted in the formation of enamel-like crystal assemblies. Biochemical methods relying on enamel proteins as templating matrices have aided the growth of elongated calcium phosphate crystals. To illustrate the validity of this biochemical approach we have successfully grown enamel-like apatite crystals organized into decussating enamel rods using an organic enamel protein matrix. Other studies reviewed here have employed amelogenin-derived peptides or self-assembling dendrimers to re-mineralize mineral-depleted white lesions on tooth surfaces. So far, cell-based enamel tissue engineering has been hampered by the limitations of presently existing ameloblast cell lines. Going forward, these limitations may be overcome by new cell culture technologies. Finally, whole-tooth regeneration through reactivation of the signaling pathways triggered during natural enamel development represents a biological avenue toward faithful enamel regeneration. In the present review we have summarized the state of the art in enamel tissue engineering and provided novel insights into future opportunities to regenerate this arguably most fascinating of all dental tissues.

Enamel biomimetics-fiction or future of dentistry

Tooth enamel is a complex mineralized tissue consisting of long and parallel apatite crystals configured into decussating enamel rods. In recent years, multiple approaches have been introduced to generate or regenerate this highly attractive biomaterial characterized by great mechanical strength paired with relative resilience and tissue compatibility. In the present review, we discuss five pathways toward enamel tissue engineering, (i) enamel synthesis using physico-chemical means, (ii) protein matrix-guided enamel crystal growth, (iii) enamel surface remineralization, (iv) cell-based enamel engineering, and (v) biological enamel regeneration based on de novo induction of tooth morphogenesis. So far, physical synthesis approaches using extreme environmental conditions such as pH, heat and pressure have resulted in the formation of enamel-like crystal assemblies. Biochemical methods relying on enamel proteins as templating matrices have aided the growth of elongated calcium phosphate crystals. To illustrate the validity of this biochemical approach we have successfully grown enamel-like apatite crystals organized into decussating enamel rods using an organic enamel protein matrix. Other studies reviewed here have employed amelogenin-derived peptides or self-assembling dendrimers to re-mineralize mineral-depleted white lesions on tooth surfaces. So far, cell-based enamel tissue engineering has been hampered by the limitations of presently existing ameloblast cell lines. Going forward, these limitations may be overcome by new cell culture technologies. Finally, whole-tooth regeneration through reactivation of the signaling pathways triggered during natural enamel development represents a biological avenue toward faithful enamel regeneration. In the present review we have summarized the state of the art in enamel tissue engineering and provided novel insights into future opportunities to regenerate this arguably most fascinating of all dental tissues.

Five pathways for tooth enamel engineering hold great promise for developing new technologies, leading to novel biomaterials and biotechnologies to regenerate enamel tissue. Tooth enamel is a unique tissue-specific biomaterial with exceptional structural and mechanical properties. In recent years, many approaches have been adopted to generate or regenerate this complex tissue; Mirali Pandya and Thomas Diekwisch of Texas A&M College of Dentistry, USA conducted a review of the current state and future directions of enamel tissue engineering. In their review, the authors focused on five pathways for enamel tissue engineering: (1) physical synthesis of enamel; (2) biochemical enamel engineering; (3) in situ enamel engineering; (4) cell-based enamel engineering; and (5) whole tooth regeneration. The authors conclude that those five approaches will help identify the biological mechanisms that lead to the generation of tooth enamel.

Salivary acquired pellicle-inspired DpSpSEEKC peptide for the restoration of demineralized tooth enamel

Salivary acquired pellicle (SAP) is a layer of proteins and glycoproteins of salivary origin that tightly coat the tooth surface. Statherin is an important part of the SAP. The initial six-peptide sequence DpSpSEEK (where pS denotes phosphorylated serine) of the N-terminus of statherin can be immobilized on a hydroxyapatite (HAP) surface and the negatively charged domains of the DpSpSEEK side chain can catch free Ca²⁺ in saliva due to the charge adsorption effect. In order to prepare more functional materials based on DpSpSEEK, we designed a cysteine-labeled peptide sequence DpSpSEEKC, which could conjugate other macromolecules by forming a sulfur-based linkage. In this work, we measured the adsorption of DpSpSEEKC to HAP by various methods. We also coated DpSpSEEKC on a demineralized tooth enamel surface to evaluate its biomineralization capacity. The DpSpSEEKC-coated samples were characterized after immersion in artificial saliva for 2 weeks. The results showed that DpSpSEEKC has a strong adsorption capacity to HAP and could induce remineralization on the demineralized tooth enamel surface due to its carboxyl and phosphate groups. Compared with the control samples, the mechanical properties of the DpSpSEEKC-coated samples were obviously improved. In conclusion, DpSpSEEKC can provide a potential method for restoring demineralized tooth enamel.

Induction of Apatite by the Cooperative Effect of Amelogenin and the 32-kDa Enamelin

Extracellular matrix proteins are considered to play essential roles in controlling the nucleation, growth, and organization of hydroxyapatite crystals during enamel formation. The effects of amelogenin and the 32-kDa enamelin proteins on apatite nucleation were investigated by a steady-state gel diffusion device containing 10% gelatin gels loaded with 0, 0.75%, and 1.5% (w/w) native porcine amelogenins. It was found that the induction time for hydroxyapatite precipitation was strongly increased by the presence of amelogenins, suggesting an inhibitory effect of apatite nucleation. Addition of 18 μg/mL of 32-kDa enamelin to 10% gelatin also caused inhibition of nucleation. Remarkably, addition of 18 and 80 μg/mL of 32-kDa enamelin in gels containing 1.5% amelogenin accelerated the nucleation process in a dose-dependent manner. Our observations strongly suggest that the 32-kDa enamelin and amelogenins cooperate to promote nucleation of apatite crystals and propose a possible novel mechanism of mineral nucleation during enamel biomineralization.

Role of Macromolecular Assembly of Enamel Matrix Proteins in Enamel Formation

Unlike other mineralized tissues, mature dental enamel is primarily (> 95% by weight) composed of apatitic crystals and has a unique hierarchical structure. Due to its high mineral content and organized structure, enamel has exceptional functional properties and is the hardest substance in the human body. Enamel formation (amelogenesis) is the result of highly orchestrated extracellular processes that regulate the nucleation, growth, and organization of forming mineral crystals. However, major aspects of the mechanism of enamel formation are not well-understood, although substantial evidence suggests that protein-protein and protein-mineral interactions play crucial roles in this process. The purpose of this review is a critical evaluation of the present state of knowledge regarding the potential role of the assembly of enamel matrix proteins in the regulation of crystal growth and the structural organization of the resulting enamel tissue. This review primarily focuses on the structure and function of amelogenin, the predominant enamel matrix protein. This review also provides a brief description of novel in vitro approaches that have used synthetic macromolecules ( i.e., surfactants and polymers) to regulate the formation of hierarchical inorganic (composite) structures in a fashion analogous to that believed to take place in biological systems, such as enamel. Accordingly, this review illustrates the potential for developing bio-inspired approaches to mineralized tissue repair and regeneration. In conclusion, the authors present a hypothesis, based on the evidence presented, that the full-length amelogenin uniquely regulates proper enamel formation through a process of cooperative mineralization, and not as a pre-formed matrix.

Radioprotective effect of sodium selenite on developing teeth

Radioprotective agents like selenium are used to reduce the damage caused by radiation in healthy tissues. The aim of this study was to evaluate the effect of sodium selenite on the development of the molars of offspring of rats irradiated during odontogenesis. Twenty pregnant rats were randomly divided into 4 groups: control, irradiated, selenium and selenium/irradiated. The selenium and selenium/irradiated groups received 0.3 mg/kg of sodium selenite at 18 days of pregnancy. The rats of the irradiated and selenium/irradiated groups received a single dose of 4 Gy of X rays on the abdominal region at the 19th day of pregnancy. The offspring was sacrificed at 3 and 4 days after birth for evaluation of the birefringence of the enamel organic matrix, and at 30 days for evaluation of the intercuspal dimensions of the molars. The selenium/irradiated group was similar to the irradiated group with respect to the thickness and irregularity of the enamel organic matrix region in the evaluated birefringence, as the intercuspal dimensions of the molars. In conclusion, sodium selenite had no radioprotective action on the development of the molars of offspring of rats irradiated during odontogenesis and had a toxic effect in the initial time.

New developments in polymer-controlled, bioinspired calcium phosphate mineralization from aqueous solution

The polymer-controlled and bioinspired precipitation of inorganic minerals from aqueous solution at near-ambient or physiological conditions avoiding high temperatures or organic solvents is a key research area in materials science. Polymer-controlled mineralization has been studied as a model for biomineralization and for the synthesis of (bioinspired and biocompatible) hybrid materials for a virtually unlimited number of applications. Calcium phosphate mineralization is of particular interest for bone and dental repair. Numerous studies have therefore addressed the mineralization of calcium phosphate using a wide variety of low- and high-molecular-weight additives. In spite of the growing interest and increasing number of experimental and theoretical data, the mechanisms of polymer-controlled calcium phosphate mineralization are not entirely clear to date, although the field has made significant progress in the last years. A set of elegant experiments and calculations has shed light on some details of mineral formation, but it is currently not possible to preprogram a mineralization reaction to yield a desired product for a specific application. The current article therefore summarizes and discusses the influence of (macro)molecular entities such as polymers, peptides, proteins and gels on biomimetic calcium phosphate mineralization from aqueous solution. It focuses on strategies to tune the kinetics, morphologies, final dimensions and crystal phases of calcium phosphate, as well as on mechanistic considerations.

Conservation of amelogenin gene expression during tetrapod evolution

Well studied in mammals, amelogenesis is less known at the molecular level in reptiles and amphibians. In the course of extensive studies of enamel matrix protein (EMP) evolution in tetrapods, we look for correlation between changes in protein sequences and temporospatial protein gene expression during amelogenesis, using an evo-devo approach. Our target is the major EMP, amelogenin (AMEL) that plays a crucial role in enamel structure. We focused here our attention to an amphibian, the salamander Pleurodeles waltl. RNAs were extracted from the lower jaws of a juvenile P. waltl and the complete AMEL sequence was obtained using PCR and RACE PCR. The alignment of P. waltl AMEL with other tetrapodan (frogs, reptiles and mammals) sequences revealed residue conservation in the N- and C-terminal regions, and a highly variable central region. Using sense and anti-sense probes synthetized from the P. waltl AMEL sequence, we performed in situ hybridization on sections during amelogenesis in larvae, juveniles, and adults. We demonstrated that (i) AMEL expression was always found to be restricted to ameloblasts, (ii) the expression pattern was conserved through ontogeny, even in larvae where enameloid is present in addition to enamel, and (iii) the processes are similar to those described in lizards and mammals. These findings indicate that high variations in the central region of AMEL have not modified its temporospatial expression during amelogenesis for 360 million years of tetrapod evolution.

Cellular uptake and processing of enamel matrix derivative by human periodontal ligament fibroblasts

OBJECTIVE

Enamel matrix derivative (EMD), is an extract of porcine developing enamel matrix. Its commercialised form Emdogain, is claimed to stimulate periodontal regeneration by recapitulating original developmental processes, although the mechanism remains unclear. Our objective was to investigate interactions between EMD and human periodontal ligament (HPDL) fibroblasts in vitro.

DESIGN

HPDL fibroblasts were cultured in the presence of fluorescently labelled EMD and cellular EMD uptake was monitored using confocal laser scanning microscopy and immunohistochemistry. Internalised EMD proteins were characterised using SDS-PAGE.

RESULTS

EMD was internalised by HPDL fibroblasts leading to the appearance of multiple, vesicle-like structure in the cytoplasm. The internalised protein was composed mainly of the major 20kDa amelogenin component of EMD which was subsequently processed with time to generate a cumulative 5kDa component.

CONCLUSIONS

Cellular uptake and subsequent intracellular processing of EMD components by dental mesenchymal cells may play a role in EMD bioactivity and in part explain the turnover of Emdogain when placed clinically.

The effect of an octacalcium phosphate co-precipitated gelatin composite on the repair of critical-sized rat calvarial defects

This study was designed to investigate the extent to which an octacalcium phosphate/gelatin (OCP/Gel) composite can repair rat calvarial critical-sized defects (CSD). OCP crystals were grown with various concentrations of gelatin molecules and the OCP/Gel composites were characterized by chemical analysis, X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), selected area electron diffraction (SAED) and mercury intrusion porosimetry. The OCP/Gel composite disks received vacuum dehydrothermal treatment, were implanted in Wistar rat calvarial CSD for 4, 8 and 16 weeks, and then subjected to radiologic, histologic, histomorphometric and histochemical assessment. The attachment of mouse bone marrow stromal ST-2 cells on the disks of the OCP/Gel composites was also examined after 1 day of incubation. OCP/Gel composites containing 24 wt.%, 31 wt.% and 40 wt.% of OCP and with approximate pore sizes of 10-500 μm were obtained. Plate-like crystals were observed closely associated with the Gel matrices. TEM, XRD, FTIR and SAED confirmed that the plate-like crystals were identical to those of the OCP phase, but contained a small amount of sphere-like amorphous material adjacent to the OCP crystals. The OCP (40 wt.%)/Gel composite repaired 71% of the CSD in conjunction with material degradation by osteoclastic cells, which reduced the percentage of the remaining implant to less than 3% within 16 weeks. Of the seeded ST-2 cells, 60-70% were able to migrate and attach to the OCP/Gel composites after 1 day of incubation, regardless of the OCP content. These results indicate that an OCP/Gel composite can repair rat calvarial CSD very efficiently and has favorable biodegradation characteristics. Therefore, it is hypothesized that host osteoblastic cells can easily migrate into an OCP/Gel composite.

Roles of electrostatics and conformation in protein-crystal interactions

In vitro studies have shown that the phosphoprotein osteopontin (OPN) inhibits the nucleation and growth of hydroxyapatite (HA) and other biominerals. In vivo, OPN is believed to prevent the calcification of soft tissues. However, the nature of the interaction between OPN and HA is not understood. In the computational part of the present study, we used molecular dynamics simulations to predict the adsorption of 19 peptides, each 16 amino acids long and collectively covering the entire sequence of OPN, to the {100} face of HA. This analysis showed that there is an inverse relationship between predicted strength of adsorption and peptide isoelectric point (P<0.0001). Analysis of the OPN sequence by PONDR (Predictor of Naturally Disordered Regions) indicated that OPN sequences predicted to adsorb well to HA are highly disordered. In the experimental part of the study, we synthesized phosphorylated and non-phosphorylated peptides corresponding to OPN sequences 65–80 (pSHDHMDDDDDDDDDGD) and 220–235 (pSHEpSTEQSDAIDpSAEK). In agreement with the PONDR analysis, these were shown by circular dichroism spectroscopy to be largely disordered. A constant-composition/seeded growth assay was used to assess the HA-inhibiting potencies of the synthetic peptides. The phosphorylated versions of OPN65-80 (IC₅₀ = 1.93 µg/ml) and OPN220-235 (IC₅₀ = 1.48 µg/ml) are potent inhibitors of HA growth, as is the nonphosphorylated version of OPN65-80 (IC₅₀ = 2.97 µg/ml); the nonphosphorylated version of OPN220-235 has no measurable inhibitory activity. These findings suggest that the adsorption of acidic proteins to Ca²⁺-rich crystal faces of biominerals is governed by electrostatics and is facilitated by conformational flexibility of the polypeptide chain.

A mutation in the enamelin gene in a mouse model

Amelogenesis imperfecta is an inherited disorder affecting tooth enamel formation. We previously isolated a mouse strain with an amelogenesis imperfecta phenotype (ATE1 mice) from a dominant ethylnitrosourea screen and mapped the disease-causing defect to a 9-cM region of mouse chromosome 5. In the current study, we tested the hypothesis that there is a mutation in enamelin (ENAM) or ameloblastin (AMBN), both of which are located within the linkage region, by sequencing these two candidate genes. Analysis of our data shows that the amelogenesis imperfecta phenotype is linked to a C > T transition in exon 8 of the enamelin gene. The mutation predicts a C826T transition, which is present in the enamelin transcript and changes the glutamine (Gln) codon at position 176 into a premature stop codon (Gln176X). Conversely, no mutation could be detected in the ameloblastin gene. These results define the ATE1 mice as a model for local hypoplastic autosomal-dominant amelogenesis imperfecta (AIH2), which is caused by enamelin truncation mutations in humans.

Cloning, sequencing, and expression of the amelogenin gene in two scincid lizards

Our knowledge of the gene coding for amelogenin, the major enamel protein, is mainly based on mammalian sequences. Only two sequences are available in reptiles. To know whether the snake sequence is representative of the amelogenin condition in squamates, we have studied amelogenin in two scincid lizards. Lizard amelogenin possesses numerous conserved residues in the N- and C-terminal regions, but its central region is highly variable, even when compared with the snake sequence. This rapid evolution rate indicates that a single squamate sequence was not representative, and that comparative studies of reptilian amelogenins might be useful to detect the residues which are really important for amelogenin structure and function. Reptilian and mammalian enamel structure is roughly similar, but no data support amelogenin being similarly expressed during amelogenesis. By performing in situ hybridization using a specific probe, we showed that lizard ameloblasts express amelogenin as described during mammalian amelogenesis. However, we have not found amelogenin transcripts in odontoblasts. This indicates that full-length amelogenin is specific to enamel matrix, at least in this lizard.

Intracellular nanosphere subunit assembly as revealed by amelogenin molecular cross-linking studies

Enamel matrix comprises nanospheres predominantly composed of amelogenin. Studies have shown that recombinant amelogenin forms nanospheres similar to those formed in vivo, but it is unclear exactly how nanospheres assemble in vivo. Are amelogenin monomers secreted into the enamel matrix where they then self-assemble to form nanospheres, or does nanosphere assembly actually occur intracellularly? The aim of this study was to attempt to answer this question. Rat enamel organs were treated with the bifunctional cross-linker, dithio bis (succinimidyl propionate) (DSP), which cross-links primary amines lying in close molecular proximity. The key to this technique is the fact that DSP cross-links are later sensitive to reductive cleavage. The cross-linked proteins were first subjected to non-reducing sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) in the first dimension and then to reducing SDS-PAGE in the second dimension (so-called diagonal electrophoresis) followed by western blot probing with anti-amelogenin. The results indicated that intracellular amelogenin monomers are in close neighbor contact, forming complexes comprising up to six individual amelogenin monomers. We suggest that these initial complexes are prefabricated intracellularly before secretion. Once secreted, these prefabricated subunits assemble further to form the mature full-size nanospheres containing hundreds of individual amelogenins characteristic of enamel matrix.

Amelogenin Supra-Molecular Assembly in vitro Compared with the Architecture of the Forming Enamel Matrix

Tooth enamel is formed in the extracellular space within an organic matrix enriched in amelogenin proteins. Amelogenin nanosphere assembly is a key factor in controlling the oriented and organized growth of enamel apatite crystals. Recently, we have reported the formation of higher ordered structures resulting from organized association and self-orientation of amelogenin nanospheres in vitro. This remarkable hierarchical organization includes self-assembly of amelogenin molecules into subunits of 4-6 nm in diameter followed by their assembly to form nanospheres of 15-25 nm in radii. Chains of >100 nm length are then formed as the result of nanosphere association. These linear arrays of nanospheres assemble to form the microribbons that are hundreds of microns in length, tens of microns in width, and a few microns in thickness. Here, we review the step by step process of amelogenin self-assembly during the formation of microribbon structures in vitro. Assembly properties of selected amelogenins lacking the hydrophilic C terminus will then be reviewed. We will consider amelogenin as a template for the organized growth of crystals in vitro. Finally, we will compare the structures formed in vitro with globular and periodic structures observed earlier, in vivo, by different sample preparation conditions. We propose that the alignment of amelogenin nanospheres into long chains is evident in vivo, and is an important indication for the function of this protein in controlling the oriented and elongated growth of apatite crystals during enamel biomineralization.

Surface chemistry and biological responses to synthetic octacalcium phosphate

Octacalcium phosphate (OCP) has been suggested as a precursor of biological apatite in bone, dentin, and cementum because its existence explains the nonstoichiometry of apatite crystals in their compositions. Synthetic inorganic calcium phosphate compounds have been used clinically to fill bone defects, and sintered hydroxyapatite (HA) and beta-tricalcium phosphate (beta-TCP), bone substitute materials, are known to be osteoconductive, with beta-TCP also being bioresorbable. Nonsintered synthetic OCP has been shown to enhance bone regeneration accompanied by conversion into hydrolyzed apatitic products in situ and biodegradation. The surfaces of the OCP implant and the converted apatite seem to be continuously exposed to biological constituents, such as extracellular matrices, inorganic biominerals, and cellular components. This article reviews the surface reaction of OCP implants and the biological responses, such as experimentally stimulated bone formation on synthetic OCP, the mechanism of OCP hydrolysis into apatite, and the adsorption of biomolecules onto OCP and the converted apatite, of particular interest in reactive bone induction with synthetic OCP implants.

A review of protein structure and gene organisation for proteins associated with mineralised tissue and calcium phosphate stabilisation encoded on human chromosome 4

Several proteins associated with mineralised tissue (teeth and bone) or involved in calcium phosphate stabilisation in the body fluids, milk and saliva have been mapped to the q arm of human chromosome 4. These include the dentine/bone proteins dentine sialophosphoprotein (DSPP), dentine matrix protein 1 (DMP1), bone sialoprotein (BSP), matrix extracellular phosphoglycoprotein, osteopontin (OPN), enamelin, ameloblastin, milk caseins, salivary statherin, and proline-rich proteins. The proposed function of those that are multiphosphorylated is: (i) the stabilisation of calcium phosphate in solution (e.g. casein, statherin) preventing spontaneous precipitation and seeded-crystal growth or (ii) promoting biomineralisation (e.g. the phosphophoryn domain of DSPP), where the protein described as a template macromolecule, is proposed to act as a nucleator/promoter of crystal growth. The genes of these proteins have been subjected to conserved chromosomal synteny during mammalian evolution. The multiphosphorylated proteins statherin, caseins, phosphophoryn, BSP and OPN have been characterised as intrinsically disordered. The codon usage patterns for the amino acid serine reveal a bias for AGC and AGT codons within the human genes dspp, dmp1 and bsp, mouse dspp and dmp1 but not significantly for statherin or caseins. This pattern was also observed in the gene encoding hen phosvitin that also contains stretches of multiphosphorylated serines and in the dmp1 gene sequences of mammalian, reptilian and avian classes. In conclusion, these intrinsically disordered multiphosphorylated proteins are the translation products of genes displaying examples of codon usage bias, internal repeats and conserved chromosomal synteny within the mammalian class.

Control of apatite crystal growth in a fluoride containing amelogenin-rich matrix

To study how crystal growth in dental enamel is controlled by the components of the extracellular matrix, we investigated the functional roles of amelogenins and fluoride ions in apatite formation occurring through an octacalcium phosphate (OCP)-precursor pathway. Using a cation selective membrane system as a model of tooth enamel formation, we evaluated the resulting mineral habit grown in native porcine amelogenins and fluoride ions. In the absence of amelogenin and in the presence of 1 or 2 ppm F, we obtained OCP + apatite and apatite, respectively. Without amelogenins, the crystals were hexagonal prisms and cones with diameters of approximately 100-200 nm. In the presence of 10% amelogenins and in the absence of fluoride, rod-like OCP with a diameter of 35 nm were obtained. Remarkably, a combination of amelogenin and fluoride created the formation of rod-like apatite crystals with dimensions similar to the former crystals. These observations indicate a cooperative role of amelogenin and fluoride in the regulation of habit, size orientation and phase of the calcium-phosphate crystals, resulting in the formation of fine rod-like apatite whose habit and orientation were similar to that of authentic tooth enamel crystals. The significant modulating effect of the amelogenin matrix combined with fluoride ions suggests the potential for this artificial system to contribute to the engineering of novel enamel-like biomaterials in vitro.

Molecular evolution of amelogenin in mammals

An evolutionary analysis of mammalian amelogenin, the major protein of forming enamel, was conducted by comparison of 26 sequences (including 14 new ones) representative of the main mammalian lineages. Amelogenin shows highly conserved residues in the hydrophilic N- and C-terminal regions. The central hydrophobic region (most of exon 6) is more variable, but it has conserved a high amount of proline and glutamine located in triplets, PXQ, indicating that these residues play an important role. This region evolves more rapidly, and is less constrained, than the other well-conserved regions, which are subjected to strong constraints. The comparison of the substitution rates in relation to the CpG richness confirmed that the highly conserved regions are subjected to strong selective pressures. The amino acids located at important sites and the residues known to lead to amelogenesis imperfecta when substituted were present in all sequences examined. Evolutionary analysis of the variable region of exon 6 points to a particular zone, rich in either amino acid insertion or deletion. We consider this region a hot spot of mutation for the mammalian amelogenin. In this region, numerous triplet repeats (PXQ) have been inserted recently and independently in five lineages, while most of the hydrophobic exon 6 region probably had its origin in several rounds of triplet insertions, early in vertebrate evolution. The putative ancestral DNA sequence of the mammalian amelogenin was calculated using a maximum likelihood approach. The putative ancestral protein was composed of 177 residues. It already contained all important amino acid positions known to date, its hydrophobic variable region was rich in proline and glutamine, and it contained triplet repeats PXQ as in the modern sequences.